Technical specifications Exist status : brown liquid Solid content : 40 1.0 Viscosity : 150 50 cps. Specific gravity : 1.10 ¡ó 0.02 Ph : 6.0 1.0 Chloride content : below 0.001% In a 200kg drum In 1m3 ibc In a flexi bag
Application: The typical application field of tiones tm 6012e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows Plaster mortar Skim coat Grout mortars Gypsum plaster. 1.Product description Tiones tm 6012e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents. 2.Specifications Appearance: white free-flowing powder Protective colloid: polyvinyl alcohol Bulk density: 500 ± 100 g/l Particle size: max. 10% over 150 Residue moisture: ≤ 2% Ph value: 7.0 ± 1.0 (50% dispersion in water) Film properties: opaque, flexible Mfft: approx. 0°c Tg : (+6°c) 3.Properties Tiones tm 6012e increases cohesion of binding material and improves performances of Cement based products. It provides pre-mixed mortars with following advantages: Improves workability Improves adhesion strength Improves flexural strength 4. Dosage and handling Tiones tm 6012e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application. 5.Storage Tiones tm 6012e should be stored in a cool, dry place. To prevent moisture penetration, the opened bags should be sealed again as soon as possible. On account of thermoplasticity of the redispersible polymer powder, bags must not be stacked higher than one pallet. Tiones tm 6012e storage time should not exceed 6 month. 20kg/bag.
1. Product specialty: 5100C is urea formaldehyde resin powder as binders special for woodworking processing. It owns high bonding strength, low formaldehyde content as well as ideal water resistance. This powder is suitable for the cold pressing and hot pressing project. 2. Performance index: Item unit description Powder: Appearance -- white powder Moisture content % 1~3 Volatile substance %
Application: Tiones tm 6041a can be used in a variety of applications in building industry. Its typical application field is high flexible polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are: Waterproof mortars Waterproof wall putty (skim coat) Concrete repair mortars Tile grout Non-shrinking grouting material Powder paint 1. Product description: Tiones tm 6041a is a water-soluble redispersible polymer powder based on copolymer of pure acrylate. It's free of any solvents. 2. Specification: Appearance---------------------------------------- white free-flowing powder Protective colloid----------------------------------polyvinyl alcohol Bulk density-----------------------------------------500 ± 100 g/l Particle size-----------------------------------------max. 5% over 150μ m Residue moisture----------------------------------≤ 2% Ph value---------------------------------------------7.0 ± 1.0 (50% dispersion in water) Film properties------------------------------------opaque, high flexible Mfft------------------------------------------------approx. 0° c Tg ---------------------------------------------------(-5° c) 3. Properties: Tiones tm 6041a is high flexible with very low tg range. It provides pre-mixed mortar with the following advantages: Outstanding water resistance Improves flexibility Improves workability Excellent weatherability and durability Prominent heat resistance Reduces elastic modulus 4. Dosage and handling: Tiones tm 6041a is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of dry material depending on actual application and desired performance. Final required dosage should be evaluated by testing prior to actual application. 20 kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Application: 5200f is suitable for the processing of plywood, particle board, MDF&HDF, multi-ply wood engineer flooring, surface veneering as well as the other wood production. 1. Product specialty: 5200f is melamine modified urea formaldehyde resin powder as binders special for woodworking processing. It owns higher bonding strength, lower formaldehyde content as well as ideal water resistance. This powder is suitable for hot pressing project. 2. Performance index: Item unit description Powder: Appearance -- white powder Moisture content % 1~3 Volatile substance %
Application The typical application field of tiones tm 6021e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows: Eifs adhesive mortar, plaster mortar & anti-cracking mortar Cement-based tile adhesive Tile grouts Grout mortars Repair mortar Gypsum plaster 1. Product description: Tiones tm 6021e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents. 2. Specifications: Appearance---------------------------------------- white free-flowing powder Protective colloid----------------------------------polyvinyl alcohol Bulk density-----------------------------------------500 ± 100 g/l Particle size-----------------------------------------max. 10% over 150μ m Residue moisture----------------------------------≤ 2% Ph value----------------------------------------------7.0 ± 1.0 (50% dispersion in water) Film properties-------------------------------------opaque, high flexible Mfft-------------------------------------------------approx. 0° c Tg ----------------------------------------------------(+7° c) 3. Properties: Tiones tm 6021e increases cohesion of binding material and improves performances of cement based products. It provides pre-mixed mortars with following advantages: Improves adhesion strength substantially Improves workability Improves crack resistance Improves flexural strength Reduces elastic modulus 4. Dosage and handling: Tiones tm 6021e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application. 20kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Cas:13708-85-8 500g/bottle FOB China Port.
Ground granulated blast furnace slag/GGBFS/GGBFS Powder The GGBFS Powder that we export complies with standard of BS 6699. Physical and Chemical properties: Glass content: 98.7% Cement fineness: more than 450m2/kg Density: 2.89g/cm3 CaO: 38.6% SiO2: 34.48% MgO: 9.22% Al2O3: 14.49% Moisture content: 0.1% Chloride: 0.035% Sulphate: 0.16% SiO2+ CaO+ MgO: 82.1% (CaO+ MgO)/ SiO2: 1.4 CaO/ SiO2: 1.1 Mortar compressive strength: 13.5N/mm2 for 3 days, 32.5 N/mm2 for 7 days, 60 N/mm2 for 28 days Activity index: 58% for 3 days, 83% for 7 days, 106% for 28 days. Minimum Order Quantity: 1000 T Supply ability: 80,000 T per month Package: 1.5 tons per pp bag or bulk packing Function: High strength, the faster of condensation and induration, good frost resistance and good workability Sphere of application: Applicable to important structure of high strength concrete and prestressed concrete engineering, such as high-rise building, high-grade highways, bridges, etc.
Polycarboxylate Fox-8h series, which including two forms:solution(40%) and powder form. Fox-8h has a very high water reducing capacity. It is a most effective type of water reducer, disperser for using to promote high strength, excellent flowability, pumpability and workability, and efficient dispersion for cement, gypsum and ceramic materials and products.Fox-8h series are supplied to our cooperative partners as original solution for further formulation. Ibc drum for liquid form, paper drum for powder form.
Whiteness = approx 85 to 90% Setting time = 20 to 30 minute Water ratio = 1:1.5 Laminated innerlining hdpe new poly begs under 40kg packing
Oil proppant is the key material in low-permeability fracturing of oil and gas wells' exploration. This products are used in the construction of deep well fracturing, be filled to the low permeability deposit in the crack of rock stratum, in order to crack the rock of oil and gas, and propping the fractures not to be closed because of the released force when extracting oil by high closed fracturing, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wells' length of service.Our oil proppant are divided according to the anti-crushing strength into 52mpa (105kn), 69mpa (140kn), and 86mpa, (174kn) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh , 12-20 mesh , 16-20 mesh , 16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on. High strength oil fracture proppant physical and chemical properties sheet (standard oil and natural gas of the peoplef+s republic of 3y using standard sy/t5108-2006 ) Package with fibc, 1t/bag
A-151 silane coupling agent 1. Chemical name : Vingyltriethoxysilane 2. Formula : Ch2=chsi(oc2h5)3 3. Property and index : colorless or yellowish transparent liquid, soluble in organic solvent, insoluble in the water if ph is 7, but soluble in water if ph is 3.0 to 3.5. Cas no. 78-08-0 Molecular weight: 190.31 Boiling point: 160~161 ípc Density (ª±20 )g/cm3 : 0.9110ía0.005 Refractive index (n25d): 1.3960ía0.0050 4. Application : (1) with the function of both coupling agent and crosslinking agent, its suitable polymers include polyethylene, polypropylene, unsaturated polyester, etc. (2) it can be used to improve the affinity of glass fibre, inorganic fillers and resin to react with vinyl, usually used in cable and pipe of silane crosslinked polyethylene. 5. Packing and storage : (1) packing: 10kg/pail, 25kg/pail or 200kg/drum or other packing on request. (2) this product must be sealed and kept in cool & ventilated place. (1) packing: 10kg/pail, 25kg/pail or 200kg/drum or other packing on request. (2) this product must be sealed and kept in cool & ventilated place.
Fly ash are produced principally at coal-fueled electric power plants , which is one of the residues generated in the combustion of coal. Owing to its pozzolanic properties, fly ash is used as a replacement for some of the portland cement content of concrete. It can improve concrete performance, making it stronger, more durable, and more resistant to chemical attack. The reuse of fly ash also creates significant benefits for our environment. (1)no mark or mark as client's requirment (2)plastics woven bag (3)1mt/bag or at your requirement
Size = 3*2 feet Weight= 8kg Width= 11 mm Whiteness = approx 75% Handle with care, easily broken item . Minimum order 1000 sheet along with 17 mt plaster of paris powder
Description : K Crete SPR 14 is a high range water reducing agent and retarding plasticizer for concrete. K CRETE SPR 14 is supplied as brown liquid based on modified sulphonated Nepthalene slump retainer Plasticiser. The powerful dispersing agent of the high range water reducing super plasticizer can be used in many ways to obtain dense, high strength durable concrete (M35, M40, M45 M50). The high water reduction properties makes of K CRETE SPR 14 an ideal application in precast concrete where high early strength is of paramount importance. K CRETE SPR 14 is chloride free. Increases workability : K Crete SPR 14 when incorporated in concrete mixes increases the workability without the risk of segregation and bleeding. K CRETE SPR 14 also retains the slump for much longer time which facilitates easy placement. Increases strength : K Crete SPR 14 can be used to reduce water content transportation and for a given workability which leads to increased early and ultimate (28 days) strength. Such a high early strength facilitates early removal of formworks. 1, 5, 10, 50, 100, 200 kg carboys
(1)densified and undensified silica fume (2)concrete application and refractory application (3)amorphous sio2 :85-98% (3)light grey and dark grey (1)1mt/bag or at client's requirement (2)plastics woven bag (3) n/m or mark as client's requirement
Products introduction: Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. 2.Main performance 1, can reduce 10% of water consumption at least ; 2, can improve mixture of the concrete; 3, compression strength improves by more than 15% equally on 3-28 days; 4, can reduce the initial stage of the cement heat of hydration by a large margin; 5, have no function of corroding on the reinforcing bar. 3.Operation methods : 1. 0.2-0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test ; 2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly; 3. The result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing; Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each
Bentonite is a high swelling clay mineral whose name was derived from the location of the first commercial deposits mined at fort benton, wyoming u. S. A. Mineralogically, bentonite mainly consists of montmorillonite in combination with various mineral impurities such as feldspars, calcite, silica, etc. Montmorillonite belongs to the smectite group of clays which also include similar behaving minerals such as beidellite, saponite and hectorite. Geologically bentonites are mainly of volcanic origin, the majority of commercial deposits were formed by the hydrolysis or metamorphism of volcanic rock or ash and are almostly found in everywhere in world. The structure of montmorillonite is fundamentally a three layer structure with an octahedral aluminium hydroxyl sheet sandwiched between two layers of silicon- oxygen tetrahedra. However, the aluminium atoms are partially replaced by the substitution of either magnesium or iron atoms, thereby creating a charge deficiency within the unit structure. This results in a small negative charge on the basal plane of silica tetrahedra which is balanced by absorption of exchangeable cations between adjacent platelets. In natural montmorillonite, these cations are usually calcium, sodium or magnesium according to the formations of bentonite. Specification -welldry activated clay (montmorillonite clay, bentonite clay), 100% pure clay desiccant without any calcium chloride. In p.P. Woven bags of 25 kgs / 50kgs /1000 kgs net Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same.
Coal fly ash; Grade 1/2/3; Standard GB1596-91; Large quantity and low price are available for you
Uses SM-P is recommended strongly for use in all ready-mix, precast, and prestress concrete applications where low water-cement ratio, low permeability, high durability, high strength concrete is specified or high slump flowable concrete is required. SM-P can be applied in various concrete, including high strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, grouting material, steam curing concrete, high strength mortar, gypsum products, and so on. Advantages Increase concrete early strength. Promote workability. Increase flowability. Increase cohesiveness and segregation resistance. Shorten mold take-off time. Keep water/cement to a minimum. Promote air stability. Compatible with cements, gypsums and other admixtures. Reduce bleeding at high slumps. Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg It is easy to absorb moisture from air. So it must be kept in original sealed bag and stored at dry condition. The shelf life is one year. This product is non-toxic and non-flammable. So there is no special transportation requirement.
