Chemical Name: 2-Mercaptomethylbenzimidazole Specification: Item Powder Oiled powder Appearance(eye measurement) Light yellow or off-white crystalline powder Incipient melting point oC â?¥ 250.0 â?¥ 250.0 Heating loss % â?¤0.40 â?¤0.40 Ash content % â?¤0.40 â?¤0.40 Residue on sieve( 150�¼m),% â?¤ 0.0 â?¤ 0.0 Additive,% -- 1.0-2.0 Properties: Gray-white powder. No amell but taste bitter. The density is 1.33. Soluble in alcohol, acetone, ethyl acetate, slightly soluble in petroleu, ether, CH2CL2, insoluble in CCL4, benzene and water. Good atabilization storge ability. As second anti-degradant without poison. Application: This product can be used for natural and synthetic rubbers. As it is secondary antioxidant, ever better effects can be developed when used together with other antioxidants. Furthermore, when it is employed in casw of sulfurless vulcanization higher heat resistance can be obtained, it also severs as an accelerator of CR and heat sensitizing agent for latices. It is effective not only white and light colored articles, but also for rubber products of all types. But unsuitablefor food processing. Packaging: 25kg; plastic woven bag, paper with plastic film bag, kraft paper bag . Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 year when stored under normal conditions .
Chemical Name: Tetraethyl thiuram disulfide Specification: Item Crystal Oiled crystal Granule Appearance Light yellow crystal(granule) Initial M.P. �¿C â?¥ 66.0 66.0 66.0 Loss on drying % â?¤ 0.30 0.40 0.30 Ash % â?¤ 0.30 0.40 0.40 Residues on 840�¼m sieve, % â?¤ 0.00 0.00 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 2.50 Properties: Light yellow crystal(granule). Odorless. Specific gravity: 1.27--1.30. Soluble in benzene, toluene, carbon disulphide, acetone and chloroform; Insoluble in water, dilute acid and alkali, partly soluble in gasoline and alcohol. Sensitive to skin and mucosa. Have certain toxicity, good storage stability. Application: A primary accelerator and curing agent for NR, SBR, nitrile and EPDM. The efficiency sulphur content is 11%. Closely resembles Accelerator TMTD in its applications. Have high catalytic action to acids and guanidine type accelerator. Less scorch and blooming, good processing safety. Can be used in CR as an anti-scorching agent and as raw material for germicide, pesticide and medicine. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35â?? can cause unusual compacted product.The validity is 2 years.
Chemical Name: Zinc 2-mercaptobenzothiazole Specification: Item MZ-5 MZ-15 Powder Oiled powder Powder Oiled powder Appearance Light yellow powder Light yellow powder Initial M.P. �¿C â?¥ 200.0 200.0 200.0 200.0 Loss on drying % â?¤ 0.30 0.50 0.30 0.50 Zinc content % 16.0-22.0 16.0-22.0 15.0-18.0 15.0-18.0 Free M % â?¤ 5.0 5.0 15.0 15.0 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 0.10 0.10 Additive, % -- 1.0-2.0 -- 1.0-2.0 Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between Accelerator MBT and Accelerator MBTS. Used as a secondary accelerator in combination with Accelerator ZDMC and Accelerator ZDEC. Have the similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Wetting agent (OT Paste) used for textile industry. Dioctyl sodium sulfosuccinate as OT Paste is a white wax like solid with characteristic odor. It is sparingly soluble in water and freely soluble in alcohol, glycerol, Carbon tetrachloride, acetone xylene. It saponification value varies from 240-253 and is stable in acid and neutral solution. it hydrolyzes in alkaline solution. OT Paste is used as a wetting Agent in textile industries. OT Paste Wetting Agents is anionic product, thick paste, 0.5% of weight of cotton fiber or cloth instantaneously wets it. These products are used in various chemical industries and are highly demanded by our clients. It is also known as Docusate sodium salt sodium bis (2-ethyl hexyl) sulfosuccinate or BIS (2-ethylhexyl) sulfosuccinate, sodium salt surface. Active Agents are those that modify interfacial tension of water, usually substances that have one lipophillic and one hydrophillic group in the molecular and include soap, detergents emulsifier and wetting agents. We are engaged in formulating quality RDCOT (OT Paste) for our reputed clients. Prepared using superior components, this paste is appreciated for accurate composition and stability. Owing to our sound infrastructure, we are able to formulate fine OT paste within the stipulated time frame. Used in various industries, we offer these to our clients at reasonable prices. Our O.T. is a low foaming surface active agent. It is very powerful wetting & re-wetting agent. O.T. Finds extensive use in textile processing operation such as dyeing, bleaching, etc. Features: OT paste is an anionic wetting agent. It is Transparent Gel It finds application as rapid wetting agent in wetting of cotton yarn, rugs, carpets etc. Chemically it is Dioctyl sulfosuccinate. It is used to remove surface tension in water.
Introduction of Trehalose ---Production capacity: 5,000 tons/year Product Profile Product Name: Trehalose Other Names: Crystalline trehalose, crystal trehalose Chemical Name: α-D-glucopyranosyl-α-D-glucopyranosyl CAS No.: 6138-23-4 Molecular Formula: C12H22O11·2H2O Molecular Weight: 342.30 Appearance: White crystalline grain or powder Solubility: Easily soluble in water, hot alcohol, glacial acetic acid, canâ??t dissolve in diethyl ether, acetone Sweetness: 45% of sucrose Product features ï?¬ Foods, healthcare products industry 1. Low hygroscopicity, strong moisture holding capability, inhibit starch aging, enhance anti-freeze capability 2. Heat resistance, acid resistance, improved freezing performance, trehalose is the most stable of natural disaccharide 3. No colorability, trehalose does not cause the maillard reaction 4. High glass transition temperature, high stability, prevent dental caries 5. Prevent protein denaturation and lipid oxidation, protect biological activity 6. Modify or cover the taste, improve, remove or enhance foodsâ?? special smell and taste 7. Lasting and stable energy source, does not cause rapid and sharp change of blood sugar and insulin ï?¬ Cosmetics industry 1. Strongly moisturize capacity, keep skin epithelial cells moist even in extreme environments 2. Anti-radiation 3. Protect active ingredients in cosmetics 4. Inhibit the characteristic body odor of the elderly 5. Enhance skinâ??s absorption ability to nutrition ingredients 6. Prolong cosmeticsâ?? shelf life 7. Prevent dental caries
Chemical Name: Tetramethyl thiuram disulfide Molecular Formula: C6H12N2S4 Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Calcium Hypochlorite for disinfection of water ITEM CAL-HYPO 65%min CAL-HYPO 70%min Available Chlorine % 65min 70min Water % 5.5-10 5.5-10 Granule Size (14-50mesh)% 90min 90min Calcium hypochlorite exists as a white granular powder and has the formula of Ca(OCl)2. It has a strong scent of chlorine but is more stable than chlorine. It exists as both anhydrous and hydrated forms, giving a basic aqueous solution. The basicity of the solution arises from the hydrolysis reaction, where calcium hypochlorite is broken down into hypochlorous acid and calcium hydroxide. The basicity outweighs the acidity property since calcium hydroxide is a strong base and hypochlorous acid is a weak acid. Calcium hypochlorite is a good chlorine derivative and can release chlorine upon reactions. Calcium hypochlorite can react with carbon dioxide to form calcium carbonate, releasing dichloride monoxide. Similarly, calcium hypochlorite can also react with hydrochloric acid to form calcium chloride, water and gaseous chlorineIt is a solid substitute for liquid sodium hypochlorite for water treatment and bleaching. Calcium hypochlorite is a versatile chemical that finds its application in various industries. Some of its major applications are: 1. Deodorant: Calcium hypochlorite is used as a deodorant due to its strong oxidizing properties. It can react with the odor-causing compounds and neutralize them, thereby eliminating the foul smell. 2. Oxidizing agent: Calcium hypochlorite is a potent oxidizing agent and finds its use in various chemical reactions. It can oxidize a wide range of organic compounds, including alcohols, aldehydes, and ketones. 3. Bleaching agent: Calcium hypochlorite is commonly used as a bleaching agent in the textile and paper industries. It can remove the color from the fibers and make them white. 4. Swimming pool sanitation: Calcium hypochlorite is widely used for swimming pool sanitation. It can effectively kill the bacteria and other microorganisms present in the water and keep it clean and safe for swimming. 5. Water treatment: Calcium hypochlorite is used to disinfect drinking water and other industrial water sources. It can kill the harmful pathogens and make the water safe for consumption. 6. Bathroom cleaners and laundry detergents: Calcium hypochlorite is used in various cleaning products, such as bathroom cleaners and laundry detergents, due to its strong oxidizing properties. It can remove the tough stains and dirt from the surfaces and fabrics. 7. Haloform reaction: Calcium hypochlorite plays an important role in the haloform reaction to prepare chloroform. In this reaction, it reacts with acetone or ethanol to produce chloroform. In summary, calcium hypochlorite is a useful chemical with a wide range of applications in various industries. Its strong oxidizing and disinfecting properties make it a popular choice for water treatment, sanitation, and cleaning products.
Product information Product name: OPTICALBRIGHTENER ER Liquid(PS-1. ER330) Color Index No: C.I.199 Synonyms: FBA 199; OBA 199,Fluorescent Brightener PS-1(ER330); Optical Brightener Agent PS-1(ER330) Molecular Structure: Molecular Formula: C24H16N2 Molecular Weight: 332.3972 CAS No: 13001-39-3 C.I. No.: C.I.199 Appearance: yellowish pulpy liquid E-value: 330 Features: Thisproduct is mainly used for whitening and brightening of blending fabrics suchas polyester and polyester cotton, polyester silk, polyester yarn, polyesterramie, polyester wool as well as whitening of chemical fiber and plastic. Thisproduct applies to pad dyeing and HTHP dip dyeing, especially low temperatureadsorption and high temperature setting process. Applications 1. Pad-dyeing hot melt method: Use quantity: 1.5-3g/L Process flow: two dip dyeing and two paddyeing (mangle expression 70) pre-drying (100) curing and setting (180 190, 40-30s). 2. HTHP dip dyeing method: Use quantity: 0.2 0.5% (o.w.f) Dyeing temperature: 120 130 Dyeing time: 30 - 60 minutes PH value: 4.5 - 5.5 (adjusted withacetic acid) Low temperature adsorption and hightemperature color development dyeing method: Use quantity: 0.5 1.0% (o.w.f) Dyeing temperature: 50 60 Dyeing time: 30 minutes PH value: 4.5 - 5.5 (adjusted withacetic acid) Process flow: add BC-100 whitening agentand additive (anhydrous sodium sulphate 1-2% relative weight of dyed cloth,acetone is adjusted in PH) and fabric to dye bath at room temperature temperature rises to 50, deying for 30min washing dehydration and pre-drying (100) setting and baking (180-190, 40-30s). Package & Storage: 25kg/50kg plastic drums. It can be packedin other forms according to user's requirements. Shelf life: not more than 12 months inthe room temperature. Cautions: 1.If suspension liquid is foundprecipitated and separated, just shake it before use, which does not affect theuse effect. 2.Please note that use this product within its yellow spot, i.e. paddyeing 5g/l,dip dyeing 0.8%(o.w.f). If use this product beyond its yellow spot, it will be easy to becomeyellow.
Chemical Name : N,N-m-phenylene bismaleimide Molecular Formula: C14H8N2O4 Molecular Weight: 268.23 CAS NO. :3006-93-7 Specifications Item powder Oiled Powder Appearance Yellow or brown powder Initial Melting Point 198.0 198.0 Loss on Drying% 0.50 0.50 Ash% 0.50 0.50 Residue on 150¼m Sieve,% 0.10 0.10 Oil content,% ---- 1.0~2.0 Strength ---- ---- Physical property Density at 20â??(kg/m)3 950 950 Properties: Yellow or brown powder, soluble in THF and 1.44 share of hot acetone, insoluble in petroleum ether, chloroform,benzene and water, melting point 195 C or more. Applications: PDM as a function of rubber chemicals in rubber processing for the curing agent can also help the system can be used for peroxide curing agent, also can be used as anti-scorching agent and tackifier, both for general-purpose rubber, also applies to special rubber and rubber and use system. In natural rubber, and sulfur coordination to prevent reversion to improve the heat resistance, reduce heat, anti-aging, improve adhesion of the rubber and tire cord and the vulcanized rubber modulus. Shoulder for load tire rubber, rubber buffer layer, solve the problem of bias truck tire shoulder separation can also be used for large-size thick natural rubber products and various rubber sundries. PDM can be used as auxiliary curing agent, can significantly improve the correlation performance, increase heat resistance, suitable for high temperature curing system, reducing the compression is very obvious, but also reduce the amount of peroxide, preventing the processing of rubber in the focus burning, improve tire cord and rubber and metal bond strength. PDM is a non-sulfur vulcanizing agent for rubber cable, it can replace thiazoles, thiuram and all sulfur vulcanizing agent, solution of copper wire and copper electrical generation due to exposure to sulfur vulcanizing agent black copper sulfide contamination problems. As scorch agent for the 0.5-1.0 copies, as curing agent for the 2-3, to improve the compressive deformation of 1.5 copies, improve the adhesive strength of 0.5-5.0 copies. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: Should be stored in a cool, dry, well ventilated place, packaged products should avoid direct sunlight. Notes: This product is oil based on user needs, treatment or granulation.
* Acetic Acid * Acrylamide * Acrylic Acid * Alkalized Cocoa Powder * Aluminium Sulphate * Ammonium Bicarbonate * Ascorbic Acid * Barium Carbonate * Borax Decahydrate * Borax Pentahydrate * Boric Acid * Calcined Alumina * Caustic Soda Flakes * China Clay * Chromic Acid * Citric Acid Anhydrous * Citric Acid Monohydrate * Calcined Kaolin Clay * Desiccated Coconut Low Fat * Di Acetone Alcohol * Dextrose Anhydrous * Dextrose Monohydrate * Diammonium Phosphate * Farmer Choice Whey Powder * Formic Acid * Glucose * Glycerin * Guar Gum * Gum Rosin * Hydroxyethyl Cellulose * Hydrogen Peroxide * Iso Propyl Alcohol (I P A) * Mono Ethylene Glycol (MEG) * MaltoDextrine * Methanol * Methlylene Chloride * Nonylphenol Polyethylene Glyco ether (NP 9) * Natrosol * PVA BP17 * PVA BP26 * PVA 217 * Phenol * Phosphoric Acid * Potassium Carbonate * Potassium Hydrate * Potassium Sorbate * Propylene Glycol (PG) * Sodium Acid Pyrophosphate (SAPP) * Soda Ash * Sodium Benzoate * Sodium Bicarbonate * Sodium Carboxmethyl Cellulose (CMC) * Sodium Gluconate * Sodium Lauryl Sulfate (SLS) * Sodium Lauryl Ether Sulfate (SLES) * Sodium MetaBisulphate * Sodium Sulphate Anhydrous (SSA) * Sodium Sulphide Flakes (SSF) * Sodium Tripoly Phosphate STPP * Sorbitol * Sulphate of Potash (SoP) * Skimmed Milk Powder * Soya Lecithin * Speckles * Starch * Stearic Acid * Sulphonic Acid * LABSA 90% & 96% * Titanium Dioxide Anatase (HA-100, AF-5C)0, AF-100) * Titanium Dioxide Rutile (2190, R996, R6618) * Tri Sodium Citrate * Tri Sodium Phosphate (TSP) * Urea * White Oil * Xanthan Gum * Yeast * Zirconium Silicate * Zinc Oxide