Item Name Sintered Metal Porous Disc Filter Material inconel 600 601 625 and other metals Filtering rate 0.2um 0.3um 0.5um 1um 3um 5um 10um 15um 20um 30um 50um 80um 100um Shape Round disc, Ring shape, and other special shape. Diameter Max diameter for round shape up to 500mm Thickness Min 1mm to Max 20mm Particle removal efficiencyï¼?Up to 99.99% Density rangeMetal edged process. Special size can be made as per the drawing or request. Application Stainless Steel Sintered Powder Metal Porous Disc Filter is widely used in Many excellent filtration solutions for specialized solving the problems in petrochemical, chemical engineering, coal chemical industry, silicon, lithium battery, metallurgy, pharmacy, food and nuclear power industry, etc. Titanium porous sintered disc&sheets are now popular used as gas diffusion layer in PEM Electrolyzer stacks.
LFP-Powerwall box, a Low-voltage lithium battery. With a scalable modular design, the capacity range can be expanded from 5.12kWh to 51.2kWh.The modules are connected by cables to support high-power work and are easy to install and maintain. Long life technology ensures more than 6000 cycles with 90% DOD. Nominal Voltage: 51.2V(16series) Cell model/Configuration: 3.2V100Ah(REPT)/16S1P(51.2V) Capacity(Ah): 100AH Rated Energy(KWH): 5.12KWH Max. Charge/Discharge Current(A): 100A /100A Voltage Range(Vdc): 45-56.5V Scalability: Up to 10 parallel Communieation: TYPE-C/RS232-PC,RS485-Inverter,Canbus-Inverter Cycle Life: 6000cycles@25 90% DOD 60%EOL Design Life: 15 Years(25 Weight(Approx)(KG): Approx:48kg Dimension (W/D/H)(mm): 580(+Hand)(620)*390*155(+Install the hanger)(195) mm Installation Mode: Ip65 Safety(Pack): UN38.3,MSDS,CE-EMC Safety(Cell): UN38.3,MSDS,IEC62619,CE,UL1973,UL2054 Protection BMS, Breaker
manufacturers BYD energy type pure electric electric motor 204 Pure electric cruising range (km) Ministry of Industry and Information Technology 520 Charging time (hours) Fast charging for 0.5 hours and slow charging for 10.2 hours Quick charge capacity (%) 30-80 Maximum power (kW) 150(204Ps) Maximum torque (N�·m) 310 gearbox Electric vehicle single speed gearbox Length x width x height (mm) 4785x1890x1660 Luggage compartment volume (L) 175 Body structure 5 door 5 seat hatchback Maximum speed(km/h) 150 Official 100km acceleration time (s) 10.9 Power consumption per 100 kilometers (kWh/100km) 10.5kWh Electric energy equivalent fuel consumption (L/100km) 1.2 motor type Permanent magnet/synchronous Number of drive motors single motor Motor layout Front Battery Type BYD blade battery Lithium iron phosphate battery Battery capacity (kWh) 50.3-66.7 Battery energy density (Wh/kg) 152
Product Description CYCLIQ FLY12 CE + FLY6 CE GENERATION 3 BIKE CAMERA AND LIGHT SET Recording in resolutions up to 1080p, the cameras have a wide 135-degree field of view and a high dynamic range so fine details will be captured. 6-axis image stabilisation steadies your footage and prevents any shaking. The Incident Protection feature means that all footage locks automatically so it can't be overwritten, while Black Box technology in the FLY6 means that video and audio will be locked following an incident. The units charge in 2.5 and 2 hours, front and rear respectively, and the FLY 12 has three light and three dimming modes to suit the conditions. Lasting up to eight hours, you'll be able to get home safely after dark. INCLUDES Cycliq FLY12 CE Front Bike Camera + 600 Lumen Light, Universal adapter, tether, CE122 handlebar mount, charging cable Cycliq FLY6 CE Generation 3 Rear Bike Camera + 100 Lumen Light, Universal adapter, strap pack, tether, quick-release mounting system, 32GB microSD card, charging cable FEATURES FLY12 CE Front Bike Camera + 600 Lumen Light: New quick mounting system and simple two-button interface Shoot super crisp video at up to 60 frames per second in 1080p resolution Ultra-wide 135-degree field of view 600 lumen light has three light modes and three dimming modes Weatherproof thanks to nanotechnology Inbuilt bike alarm which alerts your phone via the Cycliq Plus App if your bike is moved Connects with your compatible Garmin via ANT+ and the Cycliq Plus App via Bluetooth Video resolution: 1080p at 30 fps, 1080p at 60 fps, 720p at 60 fps, 720p at 120 fps Video format: MP4, records 5, 10 and 15 minute segments Audio: Output - five volume levels for alerts / microphone - stereo recording Dimensions: 3.3cm x 5.5cm x 8.4cm (height x width x depth) Manufacturer claimed weight: 195 grams / 5.5 oz Battery: Rechargeable lithium-ion, 4200mAh, 15.96wh (up to eight hours life) with 2.5 hours fast recharge time FLY6 CE Generation 3 Rear Bike Camera + 100 Lumen Light: Footage captured in crisp HD (60 frames per second), with audio Black Box technology locks video and audio either side of an incident 6-axis electronic image stabilisation for rock-solid footage If the battery runs low, HomeSafe mode kicks in to keep the lights on Water and dust resistant for all weather use Two button operation Field of view: 135 degrees Video format: MP4, records 5, 10 and 15 minute segments Smart video looping: Never run out of space on your SD card, the oldest footage automatically gets overwritten Light power: 100 lumens with various dimming settings Manufacturer claimed weight: 110 grams / 3.5 oz Battery life: 5 hours (camera-only) / 4 hours (camera and light) Charging: Two hour USB fast charge Both cameras have a USB-C port to charge and connect to PC and Mac Warranty Information 5 years
Features: 1 Multifunctional Suitable Outdoor Camping,Emergency Maintenance,Night Hiking,Industrial,Searching,Hunting Etc... 2 Portable The Net Weight Only 92g,Compact And Convenient 3 5 Modes Light Enough Meet Difference Lighting Require 4 USB Type-C Fast Charging Fully Charged Only 4 Hours 5 Long Work Time 3 Hours(Turbo Mode)-88 Hours (Low Mode) 6 High Brightness 25 Lumens(Low Mode)-1100 Lumens(Turbo Mode) 7 IPX8 Waterproof Perfectly Suitable For Most Outdoor Situation,Even In The Toughest Conditions 8 Battery Power Indicator Light When The Flashlight Is Turned Off,Single Click The Switch Button To Check The Battery Status Indicator Light-Red Light Flash( 0%-10% Power) Indicator Light-Red Light On(10%-50% Power) Indicator Light-Green Light On(50%-100% Power) 9 Button Indicator Light When The Battery Is Installed,If The Button Indicator Light-Green Light On,Indicating That The Battery Is High Power,If The Button Indicator Light Is Red Light On Or Red Light Flash,Indicating That The Battery Is Low Power 10 Charging Indicator Light The Charging Indicator Light(Green Light flash),In Normal Charging Process; The Charging Indicator Light(Green Light On),Fully Charged. 11 Low Voltage Protection Function If The Battery Voltage Is Too Low,It Will Gradually Reduce The Current Working Gear Until Automatically Turned Off,Protect The Battery Life And Normal Use 12 Memory Mode Function Regardless The Flashlight Is In Any Mode,It Will Automatically Memorize The Current Working Mode,After It Is Turned Off,It Will Start To Work In The Current Memory Mode 13 Overheat Protection Function When The Item Is Overheat,The Work Mode Will Automatically Step-down(Such As: Turbo Mode Step Down To High Mode) 14 Advanced Temperature Regulation (ATR) Technology: As The Temperature Rises, FC11 Is Programmed To Automatically Step Down Or Step Up The Brightness,These Thresholds Are Set At 45 C,55 C and 65 C,The More Higher Temperature,The More Reduces Of The Brightness,Once Temperature Decreases,The Brightness Will Be Increased Again According To Your Selected Mode 15 Low Power Remind Function During Use Process,If The Button Indicator Light-Red Light Flash,It Means That The Battery Power Is Low,Remind User Charging In Time Package Included:(Not Include Power Adapter) 1 x LED Flashlight 1 x Rechargeable 5000mAh 21700 Lithium Battery 1 x USB Type-C Charging Cable 1 x Spare O-ring 1 x Fixed Clip 1 x Warranty Card 1 x Instruction Manual 1 x Package Box Warm Tips: Please Read All Instructions Carefully Before Use
BioLock P70 Smart Padlock (heavy duty type) Bluetooth Tuya Smart Life APP access, Fingerprint ID and backup keys The P70 is a smart padlock with Bluetooth (Tuya Smart) access and management, fingerprint recognition technology and backup keys. By using Tuya Smart/Smart Life APP, users are available to access the padlock, add/remove fingerprints, authorize families or friends to open the padlock remotely, record unlock logs and wrong fingerprint alarms, setting intelligent linkages like family members go home (unlock) notice, etc. P70 is also equipped with a smart biometric sensor, it identifies users precisely and unlocks in 0.5 seconds by finger touch. Two physical backup keys for usersâ?? urgent unlock purpose in case of mobile phone power down or fingers unrecognized. IP65 waterproof aluminum alloy lock body and 10mm diameter stainless-steel lock shackle, inbuilt rechargeable battery for at least 6 months standby or 2,500 times unlocking per charge. P70 smart padlock is durably designed for indoor and outdoor anti-theft security and safety protection purposes. Key Features & Advantages 1. Bluetooth connect, Tuya Smart/Smart Life APP access and management. 2. Remote operate and authorize other users or visitors to access the lock. 3. Fingerprint unlocks and backup keys, durable medium size. 4. Durable and sturdy, IP65 lock casing, 10mm diameter stainless-steel lock shackle for superior cut resistance, protect your assets against thieves. 5. Family and friend share, up to 20 sets fingerprints can be stored. 6. Rechargeable lithium battery, 9 months standby or up to 2,500 times unlock. 7. Safe and secure, P70 will remain locked even runs out of power, a quick charge by any USB power source will awake it and able to unlock it. 8. Low power alert and event data push on APP. Applications 1.Residential: house, door lock, gate, apartment lock, resort, basement anti-theft security. 2.Business: office, warehouse, hospital, fence, shed. 3.Public area: student dormitory, school locker, gym locker, employee locker, hospital locker. 4.Transportations: truck, motorbike, garage, toolbox. Specifications >>Bluetooth: Bluetooth LE 4.2 >>Fingerprint reader: 120*120 sensor >>Max. authorized fingerprint: 20 sets >>ESDï¼?+/-15kV air, +/-8kV contact. >>FRRï¼?>FARï¼?>Unlock time: >Working temperature: -20â??~+70â?? >>Working humidityï¼?0~95% >>Rechargeable battery: 300mAH >>Diameter of lock shackleï¼?10 mm >>Lock Dimensions: 70*104*28 mm >>Lock weight: ~350 g >>Black / Silver / Gold Color In the box 1.P70 smart padlock *1 2.Micro USB charge cable *1 3.Backup keys *2 4.User manual *1 Package info >>Package size: 130*90*33 mm >>Package weight: 0.46KG >>Carton box: : 43(L)*33(W)*14cm >>Gross weight: 15 KG, 30pcs/CTN OEM/Rebranding >>BioLock offers neutral products and package, OEM and Logo rebranding services are available.
BioLock P70 Smart Padlock (heavy duty type) Bluetooth Tuya Smart Life APP access, Fingerprint ID and backup keys The P70 is a smart padlock with Bluetooth (Tuya Smart) access and management, fingerprint recognition technology and backup keys. By using Tuya Smart/Smart Life APP, users are available to access the padlock, add/remove fingerprints, authorize families or friends to open the padlock remotely, record unlock logs and wrong fingerprint alarms, setting intelligent linkages like family members go home (unlock) notice, etc. P70 is also equipped with a smart biometric sensor, it identifies users precisely and unlocks in 0.5 seconds by finger touch. Two physical backup keys for usersâ?? urgent unlock purpose in case of mobile phone power down or fingers unrecognized. IP65 waterproof aluminum alloy lock body and 10mm diameter stainless-steel lock shackle, inbuilt rechargeable battery for at least 6 months standby or 2,500 times unlocking per charge. P70 smart padlock is durably designed for indoor and outdoor anti-theft security and safety protection purposes. Key Features & Advantages 1. Bluetooth connect, Tuya Smart/Smart Life APP access and management. 2. Remote operate and authorize other users or visitors to access the lock. 3. Fingerprint unlocks and backup keys, durable medium size. 4. Durable and sturdy, IP65 lock casing, 10mm diameter stainless-steel lock shackle for superior cut resistance, protect your assets against thieves. 5. Family and friend share, up to 20 sets fingerprints can be stored. 6. Rechargeable lithium battery, 9 months standby or up to 2,500 times unlock. 7. Safe and secure, P70 will remain locked even runs out of power, a quick charge by any USB power source will awake it and able to unlock it. 8. Low power alert and event data push on APP. Applications 1.Residential: house, door lock, gate, apartment lock, resort, basement anti-theft security. 2.Business: office, warehouse, hospital, fence, shed. 3.Public area: student dormitory, school locker, gym locker, employee locker, hospital locker. 4.Transportations: truck, motorbike, garage, toolbox. Specifications >>Bluetooth: Bluetooth LE 4.2 >>Fingerprint reader: 120*120 sensor >>Max. authorized fingerprint: 20 sets >>ESDï¼?+/-15kV air, +/-8kV contact. >>FRRï¼?>FARï¼?>Unlock time: >Working temperature: -20â??~+70â?? >>Working humidityï¼?0~95% >>Rechargeable battery: 300mAH >>Diameter of lock shackleï¼?10 mm >>Lock Dimensions: 70*104*28 mm >>Lock weight: ~350 g >>Black / Silver / Gold Color In the box 1.P70 smart padlock *1 2.Micro USB charge cable *1 3.Backup keys *2 4.User manual *1 Package info >>Package size: 130*90*33 mm >>Package weight: 0.46KG >>Carton box: : 43(L)*33(W)*14cm >>Gross weight: 15 KG, 30pcs/CTN
The Primary current sensor uses the same sensor technology as the original Rogowski coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected. The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily attaches to the line with a standard insulating bar. Once on the line, it immediately begins to collect and record the primary current on the line. The Primary current sensor is equipped with a 433M wireless port for communicating the recorded data into the userâ??s PC. The data is downloaded through GF2018S PC-Link Software, which allows the user to download, view and query the data stored on the Primary current recorder. The housing of the Primary current sensor is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, waterproof and resistant to flame. It also operates within a wide temperature range. The Primary current recorder has a screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions. PC-Link Software is a user-friendly software interface that allows the user to download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through an 433M Port. PARAMETERS Basic parametersã?? Recording ammeter kit 3 wireless current sensors (GF2018A, GF2018B, GF2018C) 433 HHT(handheld terminal) or 433M wireless data reader(GF2018R) PC-LinkSoftware software(GF2018S) Carrying case Data recording interval 1min, 5min, 10min,15min, 30min; Time can be set from 1 second to 60 minutes Communication distance(wireless) Max 100m Communication 433M, 868M or 915M (option) Installation Installation with electricity; Disassemble with electricity Battery 3.6 volt lithium battery,9000mAh; Battery can be replaced Software requirements PC-Linksoftware & microsoft Excel Processor 100 MHz or higher (200 MHz or higher recommended) RAM 32 MB, 64M recommended Drive space 15 MB to load software, 10 MB of operating Space Use of position Outdoor or indoor Electrical parameters Range of operation Voltage 69kV,35kV,20KV, 10kV, 6kV, 0.38kV Current 0 to 400A; 0 to 800A; 0 to 1500A; 0 to 3500A; Sensor opening Up to 3.3 cm Resolution Amps 1 to 99.9A 0.1A 100 to 300A 1A Amps accuracy ±1% of reading plus 2 counts Frequency 60Hz (57-63 Hz) or 50Hz (47-53 Hz) models available Mechanical parameters Weight (kg) 0.48 Carrying case(kg) 6.5 Environmental conditions Operating temperature -40C to 60C
� Plug And Play: No driver installation needed, easy to use. Just connect the receiver Base with USB cable (included) to Pc or Laptop and Scan the setup codes from user manual. Then you can scan Barcodes into EXCEL/WORD/Notepad or any other common file, Compatible Windows, Mac, or Linux operating systems, such as Novell and Quickbook. works like a virtual keyboard input. � Works with 99.99% of the 1D barcodes: UPC-A,UPC-E,EAN-13,EAN-8,ISBN/ISSN code 39,Codabar,Interleave 25,Industrial 25,Matrix 25 Code 128Code 93,Code 11,MSI/PIESSEY,UK/PLESSEY,UCC/EAN128,Fedex, UPS, USPS, etc. � With built-in rechargeable battery: Integrated 2200mAh Li-Ion Lithium battery, standby of more than half a year if fully charged; continuous scanning barcode for more than one week; It can be charged by any USB port. � Two working mode: Instant upload mode / storage mode. Internal offline storage supports up to 100,000 barcodes in offline storage mode. Scan and store barcode when far away from the receiver, and then update the data to your device when you come back entering the wireless transmission range. � Long Distance 2.4GHz Wireless Transmission Technology - much longer than bluetooth !!!. Delivers up to 150Ft transmission in open Air. No More Data Cable Needed, easily connected with your laptop or Computer. NOTE: this is 1D scanner, it can't Read 2d/qr/pdf codes. NOTE: can't Read barcodes from screen. NOTE: doesn't compatible to work with smartphones or tablet. Product description Wireless Barcode Scanner with base Features: *Light Sources: 650nm laser (safe visible laser diode) *Decoded Capability: EAN-8, EAN-13, UPC-A, UPC-E, CODE39, CODE93, CODE128, EAN128, Codebar, Industrial 2 of 5, Interleave 2 of 5, Matrix 2 of 5, MSI, China Post Code, and other 1d barcodes. *With receiver/charging base, plug and play. *Large capacity battery: 2200mAh Li-ion battery. *Scan Method: successively; manually *Scan Speed: �300 times/second *Scan Angle: Yaw 55°, Rotation 30°, Pitch 65° *Resolution: 4 mil (0.1mm) *Depth of Scan Field: 0-250mm (0.33mm, PCS90%) *Error Rate: less than 1/5million *Interface: USB *Operation Frequency: 2.4Ghz *Transmission Distance: 150Ft outdoor *Storage Ability: 512000 bytes *Compatible Operating Systems: Windows XP/ Vista/ 7/ 8/ 8.1/ 10, MAC OS X, Linux. What's in the box? 1*Barcode Scanner 1*Receiving and Charging Base 1*2m USB Cable 1*Charger for Battery Charging (With Adapter) 1*User Manual (English Version)
Large qty discounts are available Symbol MC9000 MC9060-S MC9090-S Battery(1550 mAh) Specifications: Condition: Aftermarket Compatible Model: Symbol MC9000, MC9060-S, MC9090-S Color: Black Battery Type: lithium battery Voltage: 7.4V Capacity: 1550mAh Origin: China Ibarcode Solutions Advantages: 1. We provide high quality New Symbol MC9000, MC9060-S, MC9090-S and other Symbol Series repair parts with best price. 2. We are the leading manufacturer of aftermarket replacement parts for the most recognized brands of barcode devices, with more than 8years of experience. 3. We are dedicated to supplying high quality products which meet or exceed the requirements of our customers. As a manufacture of Keypads, Keypad Module, Overlays, Keyboard/ Keyswitch, Front/ Rear Housing, LCD, Digitizer, Laser Scan Engine, Replacement Batteries, Card Readers and other Replacement Parts, we ensure that consistenly high standards of quality control are appied in our company. 4. WE OFFER innovative, Dedicated, IntegratedOne- Stopsolutions, not just products and procurement. 5. WE OPERATE based on customer demand, self-synchronizing, self-adapting, self-improving. Shipping: Shipping 1. Items ordered will be sent out via FedEx, DHL, TNT or China Post Airmail within 3 business days after payment complete. Notification of shipment with tracking number will be sent to buyer. 2. Delivery time: TNT, DHL express,FedEx usually takes 2-5 days delivery. China Post Airmail Parcel usually takes 14- 21 working days belong to different places. Sometimes it will be hold at the customs which will cost much longer than expected. 3. International Buyers-Please note: Import duties, taxes and charger are not included in the item price or shipping charges. These charge are the buyer's responsibility You can indicate your personal requirement when place your order,such as color, value of declaration etc. Return and Warranty: 1. All items will be 100% check or tested before shipping. 2. In case if the item is defective or has any problem, please contact us first to check the problem. After confirmed by us, it can be exchange or return within 7days after receipt. 3. If you need to exchange or return, please request a return address from us. The buyer should pay for the return shipping fee. 4.Items return must contains all accessories and in its original package. Quality Control Feedback: 1. If you have any questions, please feel free to contact us. We will reply you ASAP with 24hours. Work Hours: Monday to Saturday. 2. Please do not forget to leave us a 5 star positive feedback is you are satisfied with our products and service. We really cherish any chance to do business with you. 3. If you have any unsatisfied about the products or our service, please do not hesitate to contact us before leaving negative feedback. We will do our best to solve all problems and improve our service.
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 , resolution 0.0005 ; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-22800 Feature: 1. Accuracy: 0.005 resolution: 0.0008 2. Measurement range: ± 30 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: �± 30�° Accuracy: 0.005�°, resolution: 0.0008�° Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85â?? IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
ER-TS-22800 Feature: 1. Accuracy: 0.005 , resolution: 0.0008 2. Measurement range: ± 30 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: ± 30 Accuracy: 0.005 , resolution: 0.0008 Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85 IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01°, resolution 0.002°; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 resolution 0.0005 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01, resolution 0.002; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001, resolution 0.0005; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ leveling Ship navigation attitude measurement High Railway Foundation Tunnel Monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01 resolution 0.002 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85 IP67 protection grade Applications Billboard monitoring Bridge construction PTZ leveling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
