The advent of cars has greatly promoted the development of society and improved the quality of our life. But on the other hand, the waste tires produced by automobiles pose a huge threat to our living environment. DoingGroup has developed a waste tire pyrolysis plant, the pyrolysis plant is the use of high temperature cracking chemical reactions, the waste tires cracked into fuel, carbon black, steel wire, combustible gas process. The main workflow of the tire pyrolysis plant is as follows: 1. Use mechanical waste tires to enter the reactor and close the inlet to prevent gas flow out. 2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor. 3. The hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly enhance the production of pyrolysis oil. 4.Liquefied petroleum gas that can not be liquefied under atmospheric pressure is returned to the reactor as fuel for combustion, which is not only energy saving and environmental protection. 5. After the completion of oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wires will be removed automatically or manually. The main advantages of waste tire pyrolysis plant are as follows: 1. Reactor press standard manufacturing, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high pressure and high temperature. 2 high standard 3-step welding process, not easy to crack, long service life. 3. Pinion rotation device, small power, does not directly contact the reactor, heat transfer less easily deformed. 4. The three-stage cooling system uses tube condensers, also known as heat exchangers, which are currently the most commonly used and best performing condensers in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production. 5 safety device oil-water separator, water seal, vacuum device, to ensure the safe and efficient operation of equipment. The final product cracked by the waste tire cracker has a wide range of uses, mainly as follows: 1. Fuel: Mainly used in steel mills, boiler heating, heavy oil generating units, cement plants and so on 2 carbon black: can be used for pressure ball burning, can also be used for refined toner. Refined toner for new tires, rubber soles and pigments. 3. Steel wire: can scrap recycling, can also be re-cast into other steel. 4. Combustible gas: the system was re-collected for reactor heating.
With the improvement of living standards, the car has become one of the essential means of transport for people traveling. On the one hand, it brings great convenience to our life. On the other hand, the waste tires on the car also pose a great threat to our living environment. In response to this serious social problem, DoingGroup uses pyrolysis principle to crack waste tires into fuel oil, carbon black, steel wire and combustible gas. Waste tire pyrolysis equipment by people from all walks of life at home and abroad more and more attention and praise. Our waste tire pyrolysis is so popular because it has the following advantages: 1. Our pyrolysis reactor is made according to the pressure vessel production standards, using 16mm thick boiler special steel and arc compression head, can withstand high pressure and high temperature. 2. High-standard 3-step welding process, not easy to crack, long service life. 3. Pinion rotation device, power is small, not directly contact the reactor, less heat transfer, not easy to deformation. 4. The three-stage cooling system uses tube condensation, also known as a heat exchanger, and is currently the most commonly used and best performing condenser in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil yield. 5. Our equipment has the following safety devices: water separator, water seal, vacuum device. They can prevent oil and gas from flowing backwards Pyrolysis, also known as pyrolysis, pyrolysis, pyrolysis, pyrolysis, refers to the pyrolysis of organic matter in an oxygen-free environment, and is a chemical process that converts one sample to another. Waste tire pyrolysis equipment is the process of pyrolysis of waste tires into oil, non-condensable gases and carbon black and steel wire by heating at high temperatures. The final product of waste tire cracker is fuel oil, carbon black, steel wire and combustible gas. These materials have a wide range of uses in our life and can be used in a variety of industries. Fuel oil : Can be used in steel mills, cement plants, boiler heating, heavy oil generator combustion heating. Carbon black: can be used for pressure ball burning, and refining flour. Which refined flour and can be used for new tires, rubber soles, pigments of raw materials. Steel wire: Can be used for scrap recycling and re-casting. Combustible gas: will be recycled back to the equipment for reactor heating. Our equipment has different specifications, designed for each customer's different needs of different capacity, customers can choose according to their needs and budget. Any questions about the machine, please feel free to contact us. -
According to statistics, in 2013, the amount of waste tires produced in China was 10.18 million tons, and it is estimated that more than 20 million tons will be exceeded in 2020. Where is the growing number of used tires? In response to this social problem, DoingGroup used chemical cracking reactions, R & D out of waste tire cracking equipment. Our waste tire refining equipment, by more and more people's attention, every day from around the world to visit our factory visit our equipment, our equipment is so popular, is Because of its following advantages: 1. Reactor is produced according to the pressure vessel production standards, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high temperature and pressure. 2. High standard three-step welding process, not easy to rupture, long service life. 3. Pinion rotation device, small power, no direct contact with the reactor, heat transfer less easily deformed. 4. Three-stage cooling system with tube condenser, is the most commonly used in the oil industry, the best performance of the condenser. Make sure the fuel vapor is fully cooled and produces high volumes of oil. 5. Safety devices have oil-water separator, water seal, vacuum device. To ensure safe and stable operation of equipment. Refinery equipment process: 1, First of all, the waste tires from the feed door into the host reactor, close the feed door, sealed. Heat the main furnace with fuel coal or wood in the heating chamber. 2, When the temperature reaches 220 , oil and gas precipitation, into the buffer chamber, residual oil (containing some slag) sink to the residue tank. 3,Light oil automatically enters the cooling system, condensed into oil. 4 Non-condensable gas, it will return to the reactor, as the heating reactor fuel. After the above process, you can get fuel, carbon black, steel wire, combustible gas, which cracked the material from the waste tires has a wide range of uses: 1. Fuel oil can be used in steel mills, boiler heating, heavy oil power plants and cement plants to produce refined diesel for further processing and diesel generators, light fuels, heavy machinery. 2. Carbon black can be used for pressure ball burning, refined toner. Can be used for new tires, rubber soles, pigments made of refined toner. 3. Steel wire is mainly used for scrap recycling, and re-cast into other steel. 4. Combustible gas is mainly used for circulating heating reactor. Outstanding highlights of our equipment is energy saving, low investment and high yield. Market prospects will be more and more broad, any machine problems, please contact us !!!
Product Introduction The whole machine with delivery, into Material, pressure plate, broken one linkage control. In addition can be customized according to customer requirements of various types of wood processing equipment. Synthetic crusher crushed product size similar to the matchbox, but also can adjust the size of the material according to the size of the material, but because of raw materials, are used thickened screen, so the size of the finished product is generally 2-8 cm, belonging to broken wood equipment.  Raw material Comprehensive crusher is a professional crusher used to crush the waste template on the site, bamboo plywood, wood-based panels, plywood and other wood crushing equipment, Machinable width of 1.5 meters, the thickness of 1-30 cm of wood and other scraps. Working principle Comprehensive crusher structure is more complex, the use of hammer broken principle, in front of conveyor belt feeding, feeding port feeder, which has the first crushing system, except the nail system, the second crushing system, exhaust dust system , From the feed to the discharge of the size of the motor in this process a total of seven, belonging to the automatic with a nail removal system crusher. Structural 1, Feed delivery: to be placed plate to be broken wood; 2, Feed roller: feed speed control and keep the plate does not slip and no feed situation; 3, Spiral crusher roll: evenly distributed in the circumferential direction of the roller welding cutter, crushing roller to ensure that the moment in the circumferential direction of the same force; 4, The template is broken with the feed and broken synchronization, to achieve uniform crushing; 5, The feed roller adopts UCK series bearing plus spring compression mechanism, which can be adapted to the different thickness of the plate; 6, feed roller and crushing roller using different power system, easy to control  resistance to wear,one welding time can work continuously for more than 30 hours. Advantage 1, engaging blade, the material completely broken; 2, the choice of special blades, blade hardness is high; 3, strong structure, dense reinforcement plate to ensure the strong box; 4, automatic button control, safe and convenient; 5, safety signs and safety labels to ensure the safety of use;
Custom ADSS Tension Clamp ADSS Tension Clamps are used to connect ADSS cables to poles/towers. Armored rods provide protection and cushioning for the ADSS cables. The special design of the prefabricated rods ensures that the tension clamps do not overstress the ADSS cables, thus ensuring a normal service life of the cable system.The ADSS tension clamps are made of aluminium-clad or galvanized steel wire. Structure and raw materials Unshackle - hot-dip galvanized steel. The shackle is connected to the reinforcing bar unit. Twisted chain ring - hot dipped galvanized steel. Twisted links are used to connect the shackle to the thimble. Sleeve - hot dip galvanized cast steel. The sleeve is inserted into the unclamp of the tension clamp to provide protection and connection. Armored rod ----- Aluminum clad steel wire. Armored rods increase friction through a layer of granular emery inside the cable. The rods are shop assembled into four subsets to minimize misalignment errors and speed installation. The ends are bent outward to provide strain relief in critical cable departure areas. Prefabricated Dead Ends - Prefabricated dead ends are made from hot-dip galvanized steel wire or aluminum-clad steel wire and are assembled in the shop into a subset with a solid layer of emery to increase the grip of the tensioning clamps while reducing lateral pressure. Direction 1. Used for connecting connecting poles (towers) to terminal poles (towers), tension poles, or poles (towers) with line clamping angles of 25�° or more. Special specifications: 1 unit for each terminal pole (tower), 2 units for each tension pole (tower), and 2 units for each connecting pole (tower). You can select the specification model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or span length from the data sheet.
Portland cement clinker is a dark grey nodular material made by heating ground limestone and clay at a temperature of about 1400 C 1500 C The nodules are ground up to a fine powder to produce cement with a small amount of gypsum added to control the setting properties SR NO PARAMETER UNIT RANGE TEST METHOD TEST RESULT A Chemical Parameters 1 Silicon Dioxide SiO 2000 2160 ASTM C1142012 2 Aluminium Oxide AlO 500 640 ASTM C1142012 3 Ferric Oxide FeO 340 450 ASTM C1142012 4 Calcium Oxide CaO 6500 ASTM C1142012 5 Magnesium Oxide MgO 190 ASTM C1142012 6 Sulphur Trioxide SO 155 ASTM C1142012 7 Total Alkali Na2O 065K20 080 ASTM C1142012 8 Chloride Cl 003 ASTM C1142012 9 Loss On Ignition LOI 050 ASTM C1142012 10 Free CaO 180 ASTM C1142012 11 Insoluble Residue IR 050 ASTM C1142012 B Chemical Modules 1 Lime Saturation Factor LSF 9300 Bogue Formula 2 Silica Modulus SM 250 Bogue Formula 3 Alumina Modulus AM 170 Bogue Formula 4 Tri Calcium Silicate CS 55 Bogue Formula 5 Di Calcium Silicate CS 1000 2000 Bogue Formula 6 Tri Calcium Aluminate CA 700 Bogue Formula 7 Tetra Calcium Alumino Ferrite CAF 1000 1400 Bogue Formula Formula for arriving C3S is 4071x CaO Free CaO 760 x SiO2 6718 x Al2O3 143 x Fe2O3
Livestock frozen sperm storage liquid nitrogen tanks are the ultimate line of defence for guarding genetic resources. In the modernisation of the livestock industry, the protection and utilisation of genetic resources is the key to improving the quality of breeding stock and achieving sustainable development. TIANCHI`s special liquid nitrogen tanks for animal husbandry, designed for long-term storage of frozen sperm in animal husbandry, can provide the most reliable protection for your genetic resources bank. Here's how the liquid nitrogen tank for livestock frozen sperm storage can effectively preserve the samples: 1. Efficient heat preservation, stable as one: the frozen sperm liquid nitrogen storage tank adopts advanced vacuum multi-layer insulation technology, passing 100% product testing, and the low-temperature effect is better than international standards. 2. Superb craftsmanship, safety: the tank is made of high-strength aluminium alloy, which is lightweight and durable, together with the anti-knock PU protective cover, it can ensure the activity and safety of the frozen sperm samples even under the bad transport conditions; 3. Simple operation and intelligent prompting: it can be equipped with intuitive liquid level indication and easy-to-operate filling system, which makes frozen sperm storage simple and quick. 4. Widely used, complete models and accessories: livestock frozen sperm storage liquid nitrogen tanks are divided into 2L, 3L, 6L, 10L, 16L, 30L, 35L and 47L. 16L frozen sperm storage tanks are a popular frozen sperm storage tanks for livestock users; wide base design, stable chassis, not easy to shake and tilt, not only large capacity but also can be used with a large amount of liquid nitrogen, and can be used with a large amount of liquid nitrogen, and can be used with a large amount of liquid nitrogen.
Dear Global Business Connections Greetings from Wissam Ghader Co in Europe France We are a global business consultant company and we represent different economic business sectors and projects from the European markets such as global rail commodities , manufacturing companies and we are also connected with companies that work with green energy and solar farms business projects Happy to introduce you to AP technology Forest fencing machines business projet available now: Please use the following YouTube video in Arabic for AP Technology Machines Projet https://youtu.be/ZhqkTHyuDU0?feature=shared The AP Technology Company website in Europe will be as follows: Please have a look.. For AP Technology machines business project, please find some more details as follows. Please find attached details including manufacturing profile. AP Technology can make machines that can make a small cube (refer to the picture in attachment). AP Technology can make machines working with 3mm aluminum wire as well. The manufacturer AP Technology sold one to Finland but they requested to make it 4m high. Standard machines do not include shipping and handling costs. The AP-Tech forest fencing machine can produce rolls with 12cm vertical wire spacing. Not many machines in the industry can. At least not at this price. A demo video is provided of the fence if you want to see why it's better than a regular jungle fence. Wires sizes are as follows: This is 28x28 40x40 70x70 Also 40x40 but aluminium wire 116x116mm We are also can arrange for you a conference call meeting with you in order to introduce you to the company owner for AP Technology Mr. Ics Pater and Mr. Ics Milan, they have 30+years of experience in manufacturing and building the forest, fencing machines and also with the electrical team available. Please let us know if you require more details about the AP technology Forest fencing machines business project and how we can be of business support to you ? Best regards
The ARV 700PC is an advanced CNC Vertical Machining Centre made for delivering high output with low maintenance costs. It is a 3 axes machine that gives consistent performance. It is best suited for fabricating machine components that require a high degree of precision. It comes with a versatile set of 20 tools ATC and a BT-40 spindle taper. The fast auto tool-changer of this CNC Turning Machine reduces the idle time and thus increasing production. The 10000 RPM customized spindle gives a higher metal removal rate. Fanuc 0iMF + CNC Turning Machine Controller in the ARV 700PC ensures a better performance of the machine under all conditions. This high powered device is perfect for cutting hard metals and metal alloys. Its faster chip removal rate and superior coolant delivery systems makes it ideal for difficult jobs that require high levels of accuracy. Its twin pallet changer (Servo, optional) increases the productivity of the machine making it optimal for cutting steel, cast Iron and Aluminium. The machine is perfect for the automobile industry and the aerospace industry. It can also be used to manufacture intricate parts used in certain home appliances and orthopedic implants. This CNC milling machine will lend technical superiority to your workshop through its highly accurate milling, boring and drilling actions. Cutter Dia 80 mm Cutting Speed 250 M/min Spindle speed 1000 RPM Feed 0.2 mm/tooth/rev No of inserts: 5 Feed:1000 mm/Min Material EN8 Material Removal Rate: 150 CC/Min Material C.I Material Removal Rate: 225 CC/Min
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Essential details Finish: ZINC, Plain, Zinc,Plain,Blue,Dyed Material: Stainless steel, Steel, Stainless steel,Steel,Brass,Aluminium, Titanium Model Number: Phillips Socket Cheese Head Machine Screws Standard: DIN, DIN Grade: 4.8/6.8/8.8/10.9/12.9 Package: Iner Plastic Bag + Carton + Pallet Delivery time: 5-15 Days Head type: Pan, Truss, Flat, Oval, Round, HEX, Cheese, Binding Certificate: ISO9001:2008 Product name: Phillips Socket Cheese Head Machine Screws a manufacturer of fastener, has been supplying non-standard and custom made screw since 2002. According sample or drawing requirements, provide one-stop custom services to solving your custom screw needs. King-Tower is committed to offering you the widest range of sems screw, anti-theft screw, thread-locking screw and stainless steel screw and more. If you have any fastening inquiries, our engineering department will be glad to help with our many custom screw options. Q1. why should you buy from us not from other suppliers A1:1.Our company has passed IATF16949:2016quality system certification; 2.We have 11 years experience in screws production; 3.We can provide the OEM&ODM serve. Q2. What is the advantage about your company A2.Our company has professional team(ten engineer with 11 years experience) and professional production line(more than 200 sets of precision equipment ). Q3. Why should I choose your products A3. Our products are high quality and competitive price; Q4. The logo and the color can be customized A4.Yes,we can custom the logo and color,accroding to your requirements. Q5. Any other good service your company can provide A5. We can provide better after-sale and faster delivery.
Overview Essential details Finish: ZINC, Plain, Zinc,Plain,Blue,Dyed Material: Stainless steel, Steel, Stainless steel,Steel,Brass,Aluminium, Titanium Model Number: Set screw Standard: DIN, DIN Grade: 4.8/6.8/8.8/10.9/12.9 Package: Iner Plastic Bag + Carton + Pallet Delivery time: 5-15 Days Head type: Pan, Truss, Flat, Oval, Round, HEX, Cheese, Binding Certificate: ISO9001:2008 Product name: Stove Shaft Set Bolt a manufacturer of fastener, has been supplying non-standard and custom made screw since 2002. According sample or drawing requirements, provide one-stop custom services to solving your custom screw needs. King-Tower is committed to offering you the widest range of sems screw, anti-theft screw, thread-locking screw and stainless steel screw and more. If you have any fastening inquiries, our engineering department will be glad to help with our many custom screw options. FAQ Q1. why should you buy from us not from other suppliers A1:1.Our company has passed IATF16949:2016quality system certification; 2.We have 11 years experience in screws production; 3.We can provide the OEM&ODM serve. Q2. What is the advantage about your company A2.Our company has professional team(ten engineer with 11 years experience) and professional production line(more than 200 sets of precision equipment ). Q3. Why should I choose your products A3. Our products are high quality and competitive price; Q4. The logo and the color can be customized A4.Yes,we can custom the logo and color,accroding to your requirements. Q5. Any other good service your company can provide A5. We can provide better after-sale and faster delivery.
1. Copper Cathode Grade A / ASTM B115 00. 5. Weight of each sheet: 125kgs 1% net 2. Copper Cathodes 99.99% 6. Weight of each pallet: 2m 1% 3. 99.99% ASTM B115 UNS No C11040 ASTM B49-08a. 7. Minimum weight of each container of copper cathode: 20 MT approx. 4. Electrolytic Grade A: Premier degree size: 914mm x 914mm x 12mm (approx.) (36 x 36 x0.5) 8. Gross weight of each container: 22.2m/t approx. 1. Quantity 500 to 5,000 MT monthly 2. Trial Order MIN. 500 MT 3. Performance Bond 2 % Against DLC for Deliveries Equal to or above 500 MT. 4. Price LME Less 14-17 %, Net to Buyer for Trial and Regular Deliveries 5. Payment Irrevocable, Confirmed, Negotiable & Non-Transferable Letter of Credit (DLC) MT 700 under MT 103/TT Release 6. Country 7. Loading Port 8. Destination Port CIF Buyers Destination Port 9. Payment Terms 100% Settlement at destination port against Bill of Lading, Final SGS Assay Report, Export Permit, Certificate of Origin & Invoice. 1. COPPER (Cu) :99.99% 9. Antimony (SB) :0.1PPM 2. Magnesium (Mg) :0.4PPM 10. Selenium (SE) :0.3PPM 3. Aluminium (Al) :0.5PPM 11. Nickel (Ni) :0.2PPM 4. Manganese (Mn): Lessthan0.1PPM 12. Lead (PB) :0.2PPM 5. Bismuth (BI) :0.1PPM 13. Iron (Fe) :2PPM 6. Arsenic (AS) :0.1PPM 14. Sulphur (S) :4PPM 7. Cobalt (CO) :0.2PPM 15. Silver (AG) :10PPM 8. Silica (SI) :0.3PPM 16. Gold (Au) :0.1PPM 1. Export Permit 4. Copies of Bill of Lading (B/L) 2. Mineral Analysis Report 5. Invoice 3. Certificate of Origin 6. Assay report of quantity, quality and stuffing photos of the cargo into the containers with all container numbers at the Loading Port
Weight : 820 kg Battery : Leoch AGM Battery 6V 225Ah/3H * 8 PCS Motor : AC 48V 5 KW motor Controller : 48V 450A Charger : On board charger 48V 30A Rear Cargo Box : 600*1100*230 mm 170 KGS Suspension : Front: McPherson independent suspension Rear: trail arm suspension Steering Self compensating rack & pinionâ steering Passenger Capacity : 4 Driving Distance : 65 km Max. Speed : 20 km/h Minimum Turning Radius : 4.5m Max. Climbing Ability : 20% Minimum Ground Clearance : 170 mm Overall Dimensions : 3774*1260*2075mm Brakes : Hydraulic brake system (front disc + rear drum + foot brake for parking) Chasis Steel Wheel Base : 2420mm Front Wheel Tread : 950mm Rear Wheel Tread : 1000 mm Tires : 12 inch aluminium rim with 20 inch low profile heavy duty tire Braking Distance : 6m Windshield : DOT glass windshield with wiper Dashboard : Stereo system (bluetooth control player + 2 speakers) , USB port and 7 inch speedometers with back-up camera Reversing Alarm Body : Fiberglass / Plastic Roof : Plastic with solar panel Steering System : Self compensating â??rack & pinionâ?? steering Brake System : Hydraulic brake system (front disc + rear drum + foot brake for parking) LED Light System/ Complete headlights, 2 front turn signals, 2 taillights (each combined 1 brake light with 1 turn signal, LED lights), with DC-DC converter (converting from 48V to 12V), horn. Accelerator : Adjustable inductive accelerator continuously variable speed system Driving Mode : Electromechanical integration Rear Axle : Integrated Nerf Bar : On both sides of the car Rain cover : Transparent rain cover Premium Seat : White and red Seat Belt : With three points retractable Mirror : LED side view mirror & inner 5 panel view mirror Steering Wheel : Sports steering wheel
A clean booth is a type of air purification equipment that provides a localised high clean environment. Clean boothes are available in a wide range of cleanliness levels and space configurations. They are easy to use, flexible, easy to install, short construction period and removable, and can be added to general class cleanrooms where high cleanliness is required to reduce costs. Products Components The clean booth is mainly composed of a box, fan, primary air filter, damping layer and lamps, etc. The shell is sprayed with plastic. The product can be both suspended and ground supported, with a compact structure and easy to use. It can be used as a single unit or connected in a number of ways to form a ribbon clean area. The clean room is made of industrial aluminium (or stainless steel square, iron square with plastic spraying) as the frame, the fan filter unit (FFU) feeds the air and the anti-static drape (or toughened glass) is hung around, its internal purification level can reach 100-10000 levels. Advantages 1.The clean room can be applied independently or composed. 2. Compared with the civil engineering or assembly type building class 100 clean room, the project investment is low, the effect is good, the installation is simple and the operation cost is low. 3. Modular design structure, upgrade clean room level is very easy, scalable, and repeated use of high value. 4. Easy to move around for cleaning (universal castors can be installed). Application areas 1, Electronic factory. The workshop of an electronic factory typically has low outside purification levels, so the interior will need high-level clean areas, such as assembly line work areas, inspection tables, and special equipment work areas that release dust particles or special gases. 2, Food factory. In the food production process, it is generally recommended to use a 100-level clean shed for the packaging process. The higher the level, the higher the safety compliance rate of the food produced. 3, Laboratory: Controlling the experimental work in the clean shed area can improve the success rate of scientific research projects.
