Panels produced by this machine are mainly Used as the floor decking in russia. It has Features of high wave, high strength, high Degree automatically producing, lower cost and So on. This panel is set up with concrete, which Has good adhesiveness. This not only can save Steel moulding plate, but also can decrease The load capacity of floor decking. Therefore, Steel quantity of the whole project is Decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel 2.Applied slab thickness:0.3-1.0mm 3 charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15m*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380v 50hz or at buyer's request 11. Material of rollers: 45# steel, with hard Chrome coated 12.Testing material: q195 13.Operation model: button + touch screen Processing technique and deployment: Uncoiler Feeding platform Molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll Forming---measure length---cutting the Panel---panels to the supporter Usagethis machine products used in high Building contruction, it can save the steel Panels and the floor loading weight in the Same loading weight condition then save the Investment cost.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45# steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter Usageï¼?This machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45# steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter Usageï¼?This machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
Panels produced by this machine are mainly Used as the floor decking in russia. It has Features of high wave, high strength, high Degree automatically producing, lower cost and So on. This panel is set up with concrete, which Has good adhesiveness. This not only can save Steel moulding plate, but also can decrease The load capacity of floor decking. Therefore, Steel quantity of the whole project is Decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel 2.Applied slab thickness:0.3-1.0mm 3 charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15m*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380v 50hz or at buyer's request 11. Material of rollers: 45 steel, with hard Chrome coated 12.Testing material: q195 13.Operation model: button + touch screen Processing technique and deployment: Uncoiler Feeding platform Molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll Forming---measure length---cutting the Panel---panels to the supporter Usagethis machine products used in high Building contruction, it can save the steel Panels and the floor loading weight in the Same loading weight condition then save the Investment cost.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45 steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter Usage This machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45# steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter UsageThis machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
The 150TPD modern auto rice mill line include the vibration cleaner, de-stoner, pneumatic rice husker, paddy separator, rice whiteners, silky polisher, rice grader, rice color sorter, auto packing scale, feeding elevators, magnetic separator, control cabinet, collecting bins, dust-collection system and accessories. The storage silos and grain dryer are also optional. The 150t/day modern auto rice mill line includes the following main machines: 1 unit TQLZ200 Vibrating Cleaner 1 unit TQSX168 Destoner 2 units MLGQ36C Pneumatic Rice Huskers 1 unit MGCZ60 20 2 Double Body Paddy Separator 3 units MNMLS46 Vertical Rice Whiteners 2 units MJP150 4 Rice Graders 2 units MPGW22 2 Water Polishers 2 units FM7-C Rice Color Sorter 1 unit DCS-50S Packing Scale with Double Feeding Hoppers 3 units W15 Low Speed Bucket Elevators 15 units W10 Low Speed Bucket Elevators 1 set Control Cabinet 1 set dust/husk/bran collection system and installation materials Capacity: 6-6.5t/h Power Required: 544.1KW Overall Dimensions(L W H): 40000 15000 10000mm The optional machines for 150t/d modern auto rice mill line: Thickness grader, Length Grader, Rice Husk Hammer Mill, Bags type dust collector or Pulse dust collector, Magnetic separator, Flow Scale, The features of 150t/day modern auto rice mill line: 1. This rice processing line can be used to process both long-grain rice and short-grain rice(round rice), suitable to produce both white rice and parboiled rice, high output rate, low broken rate; 2. Use vertical type rice whiteners, high yield bring you high profit; 3. Two water polishers and rice graders will bring you more shining and higher precision rice; 4. The pneumatic rice hullers with auto feeding and adjustment on rubber rollers, higher automation, more easy to operate. 5. Usually use bag type dust collector to collect in high efficiency the dust, impurities, husk and bran during processing, bring you good working environmental; The pulse dust collector is optional; 6. Having high automation degree and realizing continuous automatic operation from paddy feeding to finished rice packing.
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
High frequency treadmill welding machine, conveyor belt welding machine is main for to do kinds of pvc /tpu conveyor belt, pvc sidewall, pvc profile, pvc cleat, pvc steps, pvc treadmill, pvc guides, t-cleat, pvc treadmill belt etc .With accurate positioning and smooth welding . 1. Two-way automatic sliding table installed , mould can be positioned accurately 2. Steady cutting pressure 1-50t can be adjustable 3. Double limit current ampere meter installed to ensure radio frequency output stable and reliable 4. Japanese omron digital temperature controller 5. High sensitive anti-spark device nl5557 to protect the mold , material and product. 6. Over-current, over-voltage protection device installed can cut off the power supply automatically when abnormal to protect the oscillator tube and rectifier. 7. Radio frequency output can be adjustable based on electro size and material thickness to guarantee the welding quality and reduce welding time to improve the machine production speed 8. Industrial wave band 27.12/40.68 mhzs according to the provision of nations" radio interference committee"(cispr), frequency stabilizer & frequency magnetic leakage suppressor installed to reduce the interference toward the equipment outside Model: Cn-15kw-2e Cn-25kw-2e Cn-35kw-2e Power: 15kw 25kw 35kw Power supply: 25kva 35kva 50kva Vibrational tube: 8t85rb 8t25ra 8t87rb Maxpressure: 1000kg 1500kg 1500kg Size of up electrode: 150*600mm 150*700mm 150*800mm Size of working table: 250*750mm 250*850mm 250*950mm Rectifier: Silicon diode Silicon diode Silicon diode Max gap of electrodes: 150mm 150mm 150mm Size of active horn: 150mm 150mm 150mm Power supply: Ac380v 3p 50/60hz ac380v 3p 50/60hz ac380v 3p 50/60hz Frequency: 27.12mhz 27.12mhz 27.12mhz Space behind electrode: 1150mm 1150mm 1150mm Driven mode: Pneumatic pneumatic Pneumatic Welding time: 0-10s 0-10s 0-10s Net weight: 1500kg 1800kg 2000kg Overall dimension: 1700*1500*1800mm 1950*1500*2400mm 2000*1500*2500mm
Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components) Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts. A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components) heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts. A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
10x8S-G Gravel Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels. 10x8S-G Gravel Pump Wear Parts Design: Impeller: Front and back shroud expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimizing suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. Casing: Robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design. Expeller (Centrifugal Seal): no external sealing water required where applicable. Stuffing Box: flushed gland sealing with braided packing and a lantern ring. Bearing Assembly: Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Tobee 18x16TU-G Gravel Pump is designed for continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump, The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, Other industries. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design. Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Rapeseed oil/canola seeds oil process and rapeseed oil refining equipment (keywords: canola oil production, canola oil plant, canola oil processing, how canola oil is made, canola oil production line, extracting canola oil, canola oil production line, canola oil mill, canola oil mill project), preparation of rapeseed oil use pre-pressing - leaching process mostly. Operation points: Rapeseed raw materials using vibrating screen or flat rotary screen screening impurity removal. As rapeseed contains more "side by side mud", also need to use vertical circular screen to the side of the mud to break, sieve out and remove with suction. After cleaning the rapeseed impurities should be less than 0.5%. The newly harvested rapeseed generally do not need to soften, but low water content of rapeseed to be used in softened layer of water in 9%, temperature 50-60 under softening conditions 12min. Then the use of vertical rolling mill or roller mill to roll the rapeseed into a 0.35mm thickness of the embryo, rapeseed into the rolling mill before the need to use the permanent magnet drum to remove the material contained in the iron. Rapeseed raw embryo by auxiliary steaming wok and pressing steamed frying pan after steaming into the pre-pressing machine mature embryo moisture content of 4-5%, temperature 110 . The pre-squeezed oil is filtered and pre-extracted rapeseed oil is sent for refining. The pre-pressed cake was sent to the leaching plant for leaching. The solvent ratio was 1: (0.8-1). The mixed oil was pretreated, evaporated and stripped to obtain refined rapeseed oil. Leaching wet meal using high-layer steaming machine or vertical high-layer of steam stripping off, the rapeseed meal.
Casting parts are widely used in industries of hardware and mechano-electronic, and gradually gain the popularity in the area of building, equipment, engineering machinery, machine tool, shipping, aerospace, automobile, electronics, computer, electrical appliance, lamp and lantern. Materials: Grey & Ductile (SG) Iron; Carbon, Alloy and Stainless Steel; Aluminum, Brass and Bronze Alloy, etc. Weights and dimensions: grams to tons; millimeters to meters. Casting Techniques: Clay Sand Casting; Resin Sand Casting; Precoated Sand Casting; Shell Casting; Foam-lost Casting; Sodium Silicate Casting; Silica Sol Casting; Low-pressure Casting. Order Quantity: Small, Medium or Large series Production Equipments: Line-frequency coreless induction furnace; Roller sand mixer; Core shooter; Air plasma cutting machine; Vibration polishing machine; Low pressure casting machine; Molding machine; Hook type airless shot blasting machine; Rubber apron type airless shot blasting machine; etc. Quality Control: Chemical analysis; Optical spectrum instrument; Mechanical properties for tensile strength, yield stress and elongation; Hardness testing; Impact testing; Leakage testing; Coordinate measuring machine (CMM); Metallographic analysis; Magnetic flaw detector; Ultrasonic flaw detector; etc. Surface Treatment: Shot blasting; Tumbling; Polishing; Passivation; Hot Dipped Galvanization; Electro Galvanization; Powder Coating; Painting; Vitrifying; etc.
What is Grape destemmer and Crusher Machine: Grape destemmer and crusher machine is an specialized equipment to process fresh grape clusters for wineries.It is designed to separate stem from grapes cluster, crush grapes, deliver grape pulp and so on.This destemmer crusher machine is usually connected with vibration sorting machine and grape fermentation. It is one of the critical devices for the whole grape wine processing line . Characteristic of Grape Destemmer and Crusher Machine: 1. Adopts single screw conveyor to delivery grape pulp. 2. This machine can achieve quantitatively feeding by adjusting the rate of screw motor. 3. Capacity of accommodating rotate speed of barrel roll with grapes varieties. 4. Quick-open crushing device is easy to operate. Crush roller is made of non-toxic, high-elastic rubber, no harming to grapes pulp. Specification of Standard Grape Destemmer And Crusher Machine: GDC001: Capacity:5-6 t/h Feeding & Stemming Motor Power: 1.5 kw Crushing Power: 0.75 kw Screw Conveyor Power: 3 kw Weight: 578 kg Dimension: 1816*710*1352 mm GDC002: Capacity:7-10 t/h Feeding & Stemming Motor Power: 2.2 kw Crushing Power: 1.1 kw Screw Conveyor Power: 5.5 kw Weight: 765 kg Dimension: 2240*864*1574 mm GDC003: Capacity:15-20 t/h Feeding & Stemming Motor Power: 3 kw Crushing Power: 1.1 kw Screw Conveyor Power: 7.5 kw Weight: 935 kg Dimension: 2590×910×1620 mm GDC004: Capacity: 25-30 t/h Feeding & Stemming Motor Power: 4 kw Crushing Power: 1.5 kw Screw Conveyor Power: 15 kw Weight: 1025 kg Dimension: 2740×1040×1780 mm GDC005: Capacity: 45-50 t/h Feeding & Stemming Motor Power: 7.5 kw Crushing Power: 3.0 kw Screw Conveyor Power: 15 kw Weight: 1400 kg Dimension: 3200×1100×1900 mm HIWANT Group:
