Composite Insulator for Sale Composite insulator is a special type of insulator composed of high-strength fiberglass rods and polyester resin impregnated materials. The advantage of this kind of insulator is that it has excellent high temperature resistance, corrosion resistance and anti-aging properties, which can effectively improve the safety and reliability of transmission lines. At the same time, composite insulators are light in weight, small in size, easy to install and maintain, and can effectively reduce the operating costs of transmission lines. In addition, the mechanical and electrical properties of composite insulators are superior to traditional porcelain insulators, which can effectively improve the safety and reliability of transmission lines. Features of Composite Insulator A composite insulator, also called a dielectric or nonconductor, is a material that resists the flow of electric current. This type of silicone rubber material is used in parts of electrical equipment intended to support or separate electrical conductors without passing current through itself. The term is also used more specifically to refer to insulating supports that attach electric power transmission wires to utility poles or pylons. Composite insulators are less costly, lighter in weight, and have excellent hydrophobic capability. This combination makes them ideal for service in polluted areas. However, these materials do not yet have the long-term proven service life of glass and porcelain.
Introduction ER-DOS-03 Dynamic Direction Sensor includes a three-axis high-temperature high-precision acceleration sensor and a three-axis high-temperature fluxgate sensor. The product uses a 24-bit high-resolution ADC to digitize the output signal of the sensor for temperature drift and quadrature compensation. The sensor can accurately measure well angle, tool face angle and azimuth angle within the range of 0~150â??. The product has the characteristics of small size, compact structure, strong anti-vibration ability, high reliability and excellent performance. The built-in digital filter and compensation algorithm can remove the interference signal of vibration and rotation, and accurately measure the vibration and rotation under the angle. In addition, the external size, installation method and digital output interface (UART or rs-232) of the probe can be customized according to different customer requirements. Features High temperature resistant Resistance to vibration and shock Dynamic measurement under rotation Low power consumption
Mine Self Priming Dewatering Pump, End Suction Dewatering Sewage Electric Water Dewatering vertical Pump, Cosmos Durable Submersible Dewatering Drainage Water Pump for Sewage (Mines, construction quarries, coal mine & slurry). Submersible Seawater-Resistant Dewatering Pumps Sewage Sludge Water Pump And Heavy Duty Anti-Abrasion Motor Drive High Hardness Alloy Double Casing Dewatering Slurry Pump for Industrial Applications. Electric Chemical Process Oil Industrial Power Plant Well Point Dewatering Dry Self Priming Pump. Submersible Dewatering Mining and Construction Sewage Cosmos Electric High Chrome Impeller Water Pump. A single stage pump has a simple structure. It has stable performance. This pump has high speed. Small volume. It has lightweight than a multistage pump. It has high efficiency. Large flow. These pumps have an easy operation and repairing. Single-stage centrifugal pumps are available in horizontal, vertical, single-suction, double-suction designs. It has easy maintenance. Long service life. Highly reliable.
TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers. Model No.: TS-M1020D Features Bluetooth Version: BLE 4.2+SPP 3.0 Frequency Band: 2.402GHz-2.480GHz ISM band TX Power: -20dBm~+4dBm Receive Sensitivity: -95dBm Air Rate: 250Kbps/1Mbps/2Mbps Antenna: Ceramic Antenna Advise Range: 80m Memory: 256KB FLASH+128KB RAM Size: 12*8*1.5mm Pin/GPIO: 12/7 Power Supply: 3.1~4.35V Operating Temperature: -20 ~+85 Peripheral Interface: UART/SPI/I2C/ADC Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s Applications Smart home Location tracking Intelligent educational equipment Measurement and monitoring system Industrial sensors and controls Medical equipment monitoring and wireless control
Product Dehydrated Kiwi Slice Low Sugar With SO2 Description Fresh sound ripe Kiwi which has been peeled, slicing, sulfiting, washing , boiling , syrupping and process by hot air dehydration. Dehydrated Kiwi is free flowing, non sticky and clump free. Packing 4 bagsX 5 kgs per box. Shelf Life 12 months under recommended storage. Storage Store in cool dry ( = 70% ( >=25 mm width, >=30mm length, 3-7 mm thick) Foreign matter visual Target absent - Plant component and other fruit contamination less than 2% by weight - Small black spot less than 5% by weight Chemical Characteristics Method Specification Moisture Content Moisture Balancer 16 % Max Sulphur dioxide Distillation& Titration 100 ppm Max Total Sugar Titration 65-78 % Water Activity Aqua Lab 0.70 Max Microbiological analysis Method Specification Total Plate Count Plate count
Product Dehydrated Kiwi Slice Low Sugar With SO2 Description Fresh sound ripe Kiwi which has been peeled, slicing, sulfiting, washing , boiling , syrupping and process by hot air dehydration. Dehydrated Kiwi is free flowing, non sticky and clump free. Packing 4 bagsX 5 kgs per box. Shelf Life 12 months under recommended storage. Storage Store in cool dry ( = 70% ( >=25 mm width, >=30mm length, 3-7 mm thick) Foreign matter visual Target absent - Plant component and other fruit contamination less than 2% by weight - Small black spot less than 5% by weight Chemical Characteristics Method Specification Moisture Content Moisture Balancer 16 % Max Sulphur dioxide Distillation& Titration 100 ppm Max Total Sugar Titration 65-78 % Water Activity Aqua Lab 0.70 Max Microbiological analysis Method Specification Total Plate Count Plate count
The Seeding Fertilizing Machine combine the seeds and fertilizers in one box, and work separately to ensure that both materials are accurately sown in the fields. The Yongxiang 600L Dual Hopper Seeding Fertilizing Machine is perfectly suited for spreading all common types of small seeds and and fertilizer together. Support customization of your needs according to your tracktor power and farmland conditions. YongXiang offers a combined 12 rows pneumatic seeder, 12 rows fertilizer box, radar sensor, rotary tiller with plough, land roller, profile modelling four-bar linkage and stepping assembly. In order to maintain the stability of the working depth, the working parts of the seeding machine are generally hinged to the frame through a profiling mechanism, so that the working parts can follow the ups and downs of the terrain during work. The Yongxiang SeedHub system with Intelligent tablet APP, central control system and radar sensor ensures precise distribution of seeds and fertilizer even in windy conditions. Using the electrically controlled metering shaft, the seed enters the air channel where it is conveyed by the blower fan to the ends through plastic hoses.
The Seeding Machine is combined with 12 Rows 300L pneumatic seeder, radar sensor, land roller and profile modelling four-bar linkage. This allows farmers to utilise the optimal time for sowing or fertilizing and benefit from saving crops volume and labor cost. The Yongxiang 12 rows Seeding Machine is perfectly suited for spreading all common types of small seeds, seed mixtures, and fertilizer. Support customization of your needs according to farmland conditions. YongXiang offers a combined 300L pneumatic seeder, radar sensor, land roller and profile modelling four-bar linkage. In order to maintain the stability of the working depth, the working parts of the seeding machine are generally hinged to the frame through a profiling mechanism, so that the working parts can follow the ups and downs of the terrain during work. The Yongxiang SeedHub with Intelligent tablet APP, central control system and radar sensor ensures precise distribution even in windy conditions. Using the electrically controlled metering shaft, the seed enters the air channel where it is conveyed by the blower fan to the ends through plastic hoses. A large selection of seed hopper sizes, seed roller and seed rows allow us to offer you a customized solution for every need and budget, and to save seeds/fertilizer volume and labor cost.
Product Description Roots vacuum pump is a dry positive displacement pump. They operate on the Roots principle, which is similar to that of rotary vane pumps. These pumps are the ideal solution when fast pumping speeds are required. In the case of contactless, oil-free compression Roots booster pumps, two symmetrical cams rotate in the working chamber. During this process, the rotating blades do not come into contact with each other or the housing. Roots vacuum pumps are often used in pumping stations in combination with oil-lubricated rotary vane pumps to achieve very high volume flows and deep final vacuums. Benyuan's three-lobes roots vacuum pump is an internationally advanced roots blower produced by importing and digesting patents and proprietary technology from the American Hibar company and utilizing the company's advanced manufacturing processes. Features 1. Air cooling. Pressure rises to -50 kpa 2. Small size, lightweight, dual-purpose for both vertical and horizontal use, convenient to replace European and American models 3. High-speed, energy-saving 4. Belt self-tensioning technology, easy to use and maintain 5.Impedance-integrated composite muffler with good noise reduction effect
Digital plethysmometers can indeed be used to measure edema in rodent models. Here's how they can be applied for this purpose: Paw Volume Measurement: One common method involves measuring changes in paw volume as an indicator of edema formation. The rodent's paw is placed in a chamber connected to the digital plethysmometer. By measuring the displacement of water or air caused by the paw, the instrument can accurately quantify changes in paw volume over time. Inflammatory Models: In research settings, edema is often induced by inflammatory stimuli such as carrageenan injection or trauma. Digital plethysmometers allow researchers to monitor the progression of edema by measuring changes in paw volume at various time points post-induction. Drug Screening: Researchers can use digital plethysmometers to evaluate the efficacy of anti-inflammatory drugs or compounds in reducing edema formation. By comparing paw volume measurements between treated and untreated groups, the effectiveness of potential therapeutics can be assessed. Genetic Studies: Digital plethysmometers are also useful in studying the genetic basis of edema formation. By comparing edema responses between different strains of rodents or genetically modified models, researchers can identify genes or pathways involved in regulating inflammation and fluid accumulation. Longitudinal Monitoring: Digital plethysmometers enable longitudinal monitoring of edema progression and resolution over time. This longitudinal approach provides valuable insights into the dynamics of edema formation and the temporal effects of interventions.
3003 aluminum plate is an AL-Mn alloy, which is a widely used anti-rust aluminum. It has low strength (slightly higher than industrial pure aluminum), cannot be strengthened by heat treatment, has good corrosion resistance, good weldability, and poor machinability. Application areas: power battery shells, automobile heat shields, air conditioning ventilation ducts, etc. 3004 aluminum plate also belongs to a series of aluminum-manganese alloys. Its strength is higher than that of 3003 aluminum plate. It has excellent formability, good corrosion resistance, good weldability, poor machinability, and cannot be strengthened by heat treatment. Application areas: lamp base materials, radiators, food storage tanks, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
There are the detailed stipulation in GMP Standard for preparation of water ,storage ,distribution . They should be no growth of microorganism and contamination .The material of storage and conveying pipeline should be non-toxic ,anti-corrosion , the design of pipeline and installation should be no dead leg , blind tube .The storage and pipeline should been cleaned ,sterilized regularly . Air vent should been equipped with hydrophobic sterilizing filter . Brief Instruction: There are four type for choice ,such as tree effect, four tree effect , five effect ,six effect , customer can choose which kind of type according to need . The feature of our equipment : 1.More cost ,safer,more effect . 2.Conclusion under specified operation parameters,the quality of water by multi effect still is steady ,reliable . 3.Objective to find out the factors influencing the quality of water by multi effect still ,if according to magnitude of influenced importance is feed water quality ,steam quality ,flow of feed water inlet,flow of the cooling water .
Pneumatic valve is a valve driven by compressed air. When purchasing pneumatic valves, only the specification, type and working pressure are specified to meet the purchase requirements, which can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal, radioactive media and other types of fluids. Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis and the rotation angle is between 0 �° and 90 �°. When it rotates to 90 �°, the valve plate is fully open. The butterfly valve is simple in structure, small in size, light in weight and only composed of a few parts. It can be opened and closed quickly by rotating 90 �°, and the operation is simple. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two types of seal: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. Valves with metal seals generally have a longer service life than those with elastic seals, but it is difficult to achieve complete sealing. Metal seal can adapt to higher working temperature, while elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used as flow control, the main thing is to select the correct size and type of valve. The structural principle of butterfly valve is particularly suitable for making large-diameter valves. Butterfly valves are not only widely used in oil, gas, chemical, water treatment and other general industries, but also used in cooling water systems of thermal power plants. The commonly used butterfly valves include wafer butterfly valve and flange butterfly valve. Wafer butterfly valve is to connect the valve between two pipe flanges with stud bolts. Flange butterfly valve is to connect the flanges on both ends of the valve to the pipe flange with bolts.
ER-EC-225: 1. Heading accuracy 1, tilt range ±5; 2. Measurement range 0~360; 3. With hard magnetic, soft magnetic and tilt compensation. Low Cost 2D Electronic Compass It is a high-precision two-dimensional electronic compass, which measures the azimuth from 0 to 360�°. It is composed of industrial microcontroller with high reliability and strong anti-interference ability, high-precision magnetic sensors and drive chips, and integrates hard magnetic interference and soft magnetic interference compensation technology. It can be customized according to customer needs, and it is very convenient to quickly integrate the electronic compass function into various products. The product is small in size and low in power consumption, and can be used in many fields such as antenna stability, automotive, and system integration. Strong shock resistance, can work normally in extremely harsh environments, which is more suitable for today's miniaturized high-precision measurement. Features Measurement range 0~360 Heading accuracy 1, tilt range �±5 Industrial grade design Input voltage DC 5V Wide temperature working -40~+85â?? With hard magnetic, soft magnetic and tilt compensation Baud rate 2400~115200 (adjustable) Working current: 40mA IP67 protection level Output RS232/RS485/TTL/MODBUS (optional) Small volume (55*37*24mm) (customizable) Applications Individual combat equipment Satellite solar antenna positioning AGV car Mining machinery, oil logging equipment Medical equipment Gimp leveling UAV positioning and navigation Tilt based monitoring Various construction machinery angle control Inspection of bridges and dams
ER-EC-220: 1. Heading accuracy 1 , tilt range �±5 ; 2. Measurement range 0~360 ; 3. With hard magnetic, soft magnetic and tilt compensation. It is a high-precision two-dimensional electronic compass, which measures the azimuth from 0 to 360 . It is composed of industrial microcontroller with high reliability and strong anti-interference ability, high-precision magnetic sensor drive chips, and integrates hard magnetic interference and soft magnetic interference compensation technology. It can be customized according to customer needs, and it is very convenient to quickly integrate the electronic compass function into various products. The product is small in size and low in power consumption, and can be used in many fields such as antenna stability, automotive, and system integration. Strong shock resistance, can work normally in extremely harsh environments, which is more suitable for today's miniaturized high-precision measurement. Features Measurement range 0~360 Heading accuracy 1 , tilt range ±5 Industrial grade design Input voltage DC 5V Wide temperature working -40~+85 With hard magnetic, soft magnetic and tilt compensation Baud rate 2400~115200 (adjustable) Working current: 40mA IP67 protection level Output RS232/RS485/TTL/MODBUS (optional) Small volume (33*27*8mm) (customizable) Applications Individual combat equipment Satellite solar antenna positioning AGV car Mining machinery, oil logging equipment Medical equipment Gimp leveling UAV positioning and navigation Tilt based monitoring Various construction machinery angle control Inspection of bridges and dams
Cumin seeds are aromatic seeds derived from the Cuminum cyminum plant, which belongs to the parsley family. Cumin seeds have a distinctive warm, earthy, and slightly bitter flavor, which adds depth and complexity to many recipes. In summary, cumin seeds are small, aromatic seeds with a warm and slightly bitter flavor. They are commonly used as a spice in various cuisines worldwide and offer both culinary and potential health benefits. Their distinctive taste and aroma make them a versatile and popular ingredient in many savory dishes. Appearance : Cumin seeds are small and elongated, resembling tiny grains or seeds. They have a characteristic light brown color and a wrinkled texture. Flavor and aroma : Cumin seeds have a warm, robust flavor with a slight peppery note and a hint of citrus. They offer a combination of earthiness, sweetness, and bitterness. When toasted or ground, they release a rich and aromatic fragrance. Culinary uses : Cumin seeds are a staple ingredient in many spice blends and dishes. They are often dry-roasted to enhance their flavor before being used in recipes. Cumin seeds are commonly found in curries, stews, soups, rice dishes, and meat marinades. They are also a key component in spice mixes like garam masala, chili powder, and taco seasoning. Health benefits : Cumin seeds not only enhance the taste of food but also offer several health benefits. They are a good source of iron, magnesium, and calcium. Cumin seeds may aid digestion, improve immunity, and have antioxidant properties. Additionally, they are believed to have antimicrobial and anti-inflammatory effects.
Titanium balls, titanium solid balls, titanium alloy balls, jewelry titanium balls, body puncture titanium balls, hollow balls TC4 titanium balls/solid titanium balls and TC4-Ti6Al4V-GR5 titanium alloy rods have a series of advantages such as excellent corrosion resistance, low density, and high specific strength, and are evaluated in petrochemical, shipbuilding, automobile and other fields. Titanium ball material: TA1 (Gr1). TA2 (Gr2). TC4 (five groups) Titanium ball specifications: diameter 1.0-200mm Titanium ball execution standard: ASTMB348 TC4 titanium ball/solid titanium ball specifications: 1-150mm Titanium ball processing technology: 1 small titanium ball (�? 3-10mm) Cold heading, photosphere, heat treatment, surface strengthening treatment, hard grinding, primary grinding, flaw detection, fine grinding, 1, 2 2 small titanium balls (�? 10-16mm) Cold heading, photosphere, heat treatment, surface strengthening treatment, hard grinding, primary grinding, flaw detection, fine grinding, 1, 2 3 large and medium-sized titanium balls (�? 16-28mm) Hot rolling, infantry, photosphere, heat treatment, surface strengthening treatment, hard grinding, primary grinding, flaw detection, fine grinding, 1, 2 Titanium ball tolerance (+/-0.005mm), mirror surface, no trachoma, no cracks. Titanium ball advantages: Titanium balls can be passivated. In an oxygen-containing environment, the passivation film can heal itself after being destroyed. Anti-corrosion, acid and alkali resistant. Titanium ball status: hot working, cold working, hardness Titanium ball surface: all mirror polished and polished. Titanium ball application fields: industry, medical treatment, catering, jewelry, bearings, aerospace, equipment
Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: �± 30�° Accuracy: 0.005�°, resolution: 0.0008�° Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85â?? IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
1. It is suitable for medical staff to change dressings for emergency care of patients, etc. 2. The main body is composed of aluminum, steel, ABS new material engineering structure, four-column load-bearing. 3. High-quality ABS engineering plastic design, double-layer bottom surface injection molding process molding table, concave design can prevent items from slipping, 304 stainless steel fence on three sides, transparent soft glass on the table, 4. Front: Central control lock, three-fold silent track, The ABS material of each drawer tray can be taken out for easy cleaning. The ABS swallowtail butterfly drawer The handle is sealed with a slot-type identification plate to prevent liquid and dust from entering. The area of the label is designed according to ergonomic principles. The slot-type is tilted upwards for easy viewing. The inner layer of the handle is thickened with abrasives for a more solid feel. There is ABS defibrillation on the table The instrument platform can be rotated 360�°, one hidden telescopic 304 stainless steel infusion stand, and the table is equipped with: one ABS defibrillator platform 5. Back: One oxygen bottle holder, one cardiopulmonary resuscitation press version, one 5-meter power socket 6. On the left side: hidden auxiliary work desk, a storage basket. 7. Right side: two ABS dirt buckets, one storage basket, two sharps boxes. 8. Four luxury swivel caster plug-in silent casters (two with brake function and two without brake), which can be used in any situation. The caster material is high-strength polyurethane, anti-curling, anti-static , Flexible and convenient to move. Five drawers Drawer the height of the drawer surface There are two small drawers 7 cm Two middle drawers 12 cm A large drawer 24 cm A large drawer 24 cm
Overview of electric high platform ball valve: The electric high platform ball valve adopts a high platform design, which can be directly installed with the actuator without the need for a bracket, which provides convenience for product installation and replacement, and has the characteristics of small flow resistance and large flow capacity. The difference between the electric high platform ball valve and the ordinary ball valve with bracket is that it occupies a small space and has a compact structure. The disadvantage is that it is not resistant to high temperature, and the temperature is transmitted to the cylinder, and the rubber ring in the cylinder is easy to age. Although the ordinary ball valve and the actuator need to be installed with a bracket and a connecting shaft, the heat dissipation function is stronger. Usually, the pipeline with a high temperature usually adopts a ball valve with a bracket, which can avoid damage to the actuator due to high temperature and prolong the service life. service life. Electric high platform ball valve features: 1. It adopts high platform ISO5211 standard design, and it can be connected and installed with the actuator without other brackets and connecting shafts. 2. It adopts silica sol precision casting, beautiful appearance, tight and reliable, good sealing performance and wide application range. 3. Anti-static function, a spring is set between the ball, valve stem and valve body, which can discharge the static electricity generated during the switching process. 4. The fluid resistance is small. The full-bore ball valve basically has no flow resistance, and the opening and closing is rapid. It only needs to rotate 90�° from fully open to fully closed, and it is easy to operate. The electric high platform flanged ball valve adopts the spring plunger type electrostatic lead-out device, so that the direct form of static passage between the ball and the valve body or the form of static passage between the ball and the valve body through the stem tube, so that the ball and the valve seat can be The static electricity generated by friction during the switching process is led to the earth through the valve body, preventing fire or explosion that may be caused by static sparks. Static electricity is an objective natural phenomenon, which can be produced in many ways, such as contact and friction. For example, for high platform ball valves, when the ball rubs against the soft-sealed switch, static electricity will be generated. If the pipeline is filled with flammable and explosive media, it is very dangerous. Therefore, a connecting device is installed in the valve to guide the static electricity of the ball to the outside to prevent static electricity. is very important.