PRODUCT DESCRIPTION The botanical name for flax of . Flax is a versatile, blue-flowered crop. The seeds for food products are harvested and then sieved through screening systems, resulting in a clean, uniform batch of whole seeds considered 99.9% pure, or human food grade. The seed itself is flat and oval with a pointed tip. It is a little larger than a sesame seed and measures about 4-6mm. The seeds have a crisp chewy texture and a pleasant, nutty flavor. Flax seeds range in color from a deep brown to a light yellow. Seed color is determined by the amount of pigment in the outer seed coat, the more pigment, the darker the seed. Seed color is easily modified through simple plant breeding techniques. Brown flaxseed is light brown to black in color. COMPOSITION Flax is rich in fat, protein, and dietary fiber. An analysis of Canadian flax averaged 41% fat, 20% protein, 28% total dietary fiber, 7.7% moisture and 3.4% ash, which is the mineral-rich residue left after samples are burned. The composition of flax can vary with genetics, growing environment, seed processing and method of analysis. The protein content of the seed decreases as the oil content increases. The oil content of flax can be altered through traditional plant breeding methods, and it is affected by geography. The cool night of northern Canada improves oil content and quality. Flax is extremely rich in Omega 3 and linolenic acid. NUTRITIONAL INFORMATION/100G Energy 2090 kJ-506kcal 27% Moisture 6-10% Protein 20.2g Lipid 36.6g with Saturated Fatty Acid: 3.67g Available Carbohydrate 6.6 with sugar: 1.55g Fibers 27.2g Calcium 228mg Sodium 20.5mg Salt 0.051g Phosphorus 505mg Magnesium 360mg Iron 7.8mg Zinc 4.0mg TYPICAL FATTY ACID & COMPOSITION Polyunsaturated (Omega 3s) 57% Monounsaturated 18% Polyunsaturated (Omega 6s) 16% Saturated 9% TYPICAL AMINO ACID & COMPOSTION (g/100g protein) Alanine 4.4 Arginine 9.2 Aspartic Acid 9.3 Cystine 1.1 Glutamic Acid 19.6 Glycine 5.8 Histidine 2.2 Isoleucine 4.0 Leucine 5.8 Valine 4.6 Lysine 4.0 Methionine 1.5 Phenylalanine 4.6 Proline 3.5 Serine 4.5 Threonine 3.6 Tryptophan 1.8-NR Tyrosine 2.3 APPLICATION: Baking, raw and cooked snacks, dietary supplement, milling, and oil extraction. STORAGE: Store in cool (20 degrees Celsius), dry location away from sunlight. EXPIRATION: Product use within 24 months of manufacture. ADDITIONAL INFORMATION: This ingredient is non-GMO, nor does it contain GMO products. This ingredient does not undergo ionizing treatment. Flax does not contain gluten. Flax is a non-allergenic product. Flax is cleaned to 99.9% pure but may have come in contact with trace amounts of wheat, soybean, or mustard from agricultural cross-contamination (in the field) only.
Product Introduction 40 microns stainless steel wire mesh filter pipe is a unique material ideal for purification and filtration. It is made by permanently bonding multiple layers of woven wire mesh panels using heat and pressure through a sintering process, which fuses individual wires and adjacent layers of mesh. This creates a material with exceptional mechanical properties, and it can have 5, 6, or 7 layers of wire mesh. Parameter Brand: TOPTITECH Material: SUS 304 SUS 304L SUS 316 SUS 316L Other alloys available as required Layer: 1-5 or as required Micron size: 1-300 um Technique: Sintering Wall Thickness: 10-50mm or as required Length: 10-1200mm Diameter: 10 - 80mm Porosity: 35% -60% Features 1. Increased stability: Because of the sintering process�´ increased stability, mesh with a higher proportion of open sections or that needs a secure pore size is a great candidate. 2. Superior strength: Sintered wire cloth�´s intrinsic strength allows for high-pressure backwashing and good resistance to tears and punctures. 3. Reusability: Diffusion metal wire cloth may be used repeatedly without diminishing quality or performance because it is so tough and simple to clean. 4. Simple to make: Sintered wire cloth is quite simple to make. For applications requiring regulated permeability, it can be shaped into a depth filter medium. 5. Flexibility: Diffusion bonded wire cloth is a versatile material that may be used to combine different layers of square plain weave wire mesh to provide a variety of filtration and flow qualities. Different type According to the number of layers, sintered mesh laminate can be divided into two series: single layer sintered mesh laminate and multiple layers sintered mesh laminate. Multiple Layer Sintered Mesh Laminate Multiple layer sintered mesh laminate, with layers ranging from two to more than 25, offers improved mechanical qualities for filters and applications involving harsh environments. One-layer wire mesh is not structurally rigid and is readily damaged when used for filtering, separation, and sifting. A deep filter media may tolerate a high pressure drop by adding to one or more layers sequentially and sintering them. Six-layer sintered mesh is made to add one layer of 12-mesh on top of a sturdy base of five-layer sintered mesh. Six-layer sintered mesh laminate is a three-in-one medical filter plate that may be used for filtering, washing, and drying. It comes in two varieties: split and monolithic construction.
ECTFE Coating Grade Resin 1.Product introduction As a resin, ethylene chlorotrifluoroethylene is a very pure fluorine copolymer, which not only has excellent mechanical properties, good weather resistance and chemical resistance common to fluorine-containing resins, but also has excellent light transmittance and hardly absorbs visible light and ultraviolet light. In addition, because it contains chlorine atoms, the moisture permeability of all fluorine resins is relatively low, which can prevent many liquids and gases from penetrating, and is beneficial to the anticorrosion and rust prevention of the protected substrate. 2.Technical Parameter Item Test Method Unit Value Density ASTM D792 g/cm3 1.66~1.68 Grain Size ASTM D1921 um 40~80 Melting Point ASTM D3418 �ºC 215~225 Melt Index ASTM D1238 g/10min (275�ºC,2.16kg) 8~15 3.Mark, Packing, Storage & Transportation 3.1 Mark The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc. 3.2 Package This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (20 �± 0.2) kg per barrel. Each barrel shall be provided with a product certificate, including: company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the Demander shall negotiate separately. 3.3 Storage This product should be stored in a clean, cool and dry place to prevent rain, sunshine, moisture, dust and other impurities. 3.4 Transportation This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation. 4.Main Application 4.1 ECTFE coating grade resin is white powder, which has excellent chemical corrosion resistance, excellent barrier performance to various corrosive gases and excellent high and low temperature resistance. 4.2 The electrostatic spraying method can be used for coating protection of reactors, pipelines, storage and irrigation, mixers and other containers in the chemical and semiconductor fields, thus delaying the service life of the equipment.
1.Product� Introduction PFA has excellent characteristics and good processability, and is widely used in lining equipment, pipeline valves, chemicals, wire and cable and medical supplies. 2.Technical Parameter Items Test Method FJY-A03S FJY-A06S FJY-A15S FJY-A30S Apprearance / Semi-transparent particies or white powder, no obvious impurities MFR ASTM D1238 0.8~3.0 3.1~6.0 6.1~15.0 16~40.0 Standard Specific Gravity ASTM D792 2.12~2.17 Melting Peak Temperature ASTM D3418 300~316 Tensile Strength (Mpa) , ASTM D638 30 28 26 22 Elongation at Break (%) , ASTM D638 300 300 300 300 Water Content, (%) , HG/T 2902 0.2 3.Main Application Application Representative Products Model Specification Lining Container and Pipeline Lining Pump Valve Gasket welding material FJY-A03S, FJY-A06S Pipe Hose, heat shrinkable rube, heat exchanger tube, level gauge tube FJY-A03S, FJY-A06S Wire and Cable Insulation sheath for communication cables, electronic cables and other cables FJY-A15S, FJY-A30S Electronic and Electrical Components Connectors, sockets, joints, chemical solvent bottles FJY-A03S,FJY-A06S,FJY-A30S Thin Film and Sheet Sheet Lining, Electrical Insulation Tape, Deposition Film FJY-A03S,FJY-A06S 4.Attention PFA is stable and non-volatile at normal ambient temperature, but it will decompose and release certain toxic gases when it is subjection to high temperature during forming process. Therefore, in the process of moulding, extrusion and injection moulding, it is need to ensure good ventilation. In the process of processing, the decomposition gas of PFA may corrosion to the equipment, so it is necessary to avoid the long residence time of PFA in the equipment at high temperature. 5.Mark,Packing, Storage & Transportation 5.1 Mark There shall be firm and clear marks on the drums of this product, indicating company name, product name, batch number, brand number (specification number), net content, etc. 5.2 Package The product is packaged in polyethylene plastic bags and then packaged in cardboard boxes with a net weight of 25 kg per box. 5.3 Storage It should stock in clean,cool,and dry warehouse,prevent from agglomeration and contamination. 5.4 Transportation This product is non-toxic,non-explosive, non-corrosive, according to non-dangerous goods transport.
The smallest and most compact lab water system from tap to ultrapure water, integrating pretreatment, RO, DI, UV, UF and terminal filter into one. Whole case with one time injection molding process, material: polypropylene, avoid rusting and keep clean, to meet GLP standard. Top cap of pretreatment in the case can be rapidly opened to replace the cartridges without opening the case. System automatically works, with electronic pressure sensor and microcomputer controlling. Automatic stop without water, automatic stop when water tank full, automatically cutting off water when pump stopping, guaranteeing 24 hours work. Auto self-flushing of RO membrane function, extend RO membranes life. On-line resistivity monitor, with apheliotropic LCD display, to detect the quality of deionized or ultrapure water. Attached portable TDS (total dissolved solid)/conductivity test pen, with dry cell design, to detect the quality of feed water and RO water. External water tanks is optional to meet different need and assure ample water-supply. Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure waters quality. Long life pretreatment (including PP fiber, and active carbon cartridge), effectively protect RO membrane. RO module with DOW membrane, ensure long life, stable operation and high desalinization rate. 4 independent ultrapure cartridges with DOW top polishing resin, ensure ultrapure waters quality up to 18.2 M.cm, with the lowest TOC level and running cost. Double wavelength (185&254nm) ultraviolet lamp module, restrain bacterias increase and reduce TOC. MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF. (0.45+0.1)um double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic. Commodity Basic Eliminating endotoxin Low TOC Synthesizing Model 15 l/h Smart-S15 Smart-S15UF Smart-S15UV Smart-S15UVF 30 l/h Smart-S30 Smart-S30UF Smart-S30UV Smart-S30UVF Feed water* Tap water: TDS200ppm) System process** PF+AC+RO+DI+TF PF+AC+RO+DI+UF+TF PF+AC+RO+UV+DI+TF PF+AC+RO+UV+DI+UF+TF Specifications of UP water UP Resistivity 18.2M�©.cm@25â?? Heavy metal ion < 0.1 ppb TOC)***
Nipple Cover Supplier Custom Nipple Pasties Wholesale Product name Beautiful OX horn shape lace nipple covers Thickness 0.01mm, ultrathin Item no. LC-08 Material Lace and cotton Features Breathable, Disposable, anti allergy Shape Round, Flower, ox horn shape, Customization Diameter 19.6cm , customized Color Skin, Black, Printing,Optional Services In-stock items, dropshipping, customization(OEM & ODM & OBM) Sample Freely provided Delivery time 7-30 workdays, negotiation Factory certificate CE Product advantages: Healthy and comfortable, breathable, various styles Fabric Comfort: High-quality lace fabric, soft and comfortable; invisible, more comfortable to wear 3D Design Fits: Ergonomic design, smooth arc Moderate thickness: fit, more effectively protect the chest, comfortable and safe Design: Ox horn shape self-adhesive paste is useful for hiding nipples without extra skin coverage, pressure and discomfort Applications: necessary supplies for female to attend important occasions, you can wear it for parties, beach, clubs, also can suit for Halloween and other festivals Convenient to use: easy to stick with self-adhesive back, just peel off the back paper and then place it on your skin (make sure the surface is dry and clean) Material: made of soft lace, skin-friendly and breathable, with great adhesiveness to skin, no need to worry about slipping, can ensure a comfortable wearing experience Zhong Aide--A reliable Nipple Cover Supplier 1. Experienced. Over the years, we have been committed to the production and sales of Nipple Cover, with modern advanced equipment and a professional production team, with reliable strength. 2. Reliable product quality. Our products are professionally certified, with hypoallergenic certificates and quality certificates, safe, harmless and hypoallergenic. 3. Factory direct sales, more flexible production time, fast delivery, preferential price, and more convenient communication. 4.Rich products, we provide you with a variety of materials and fabrics such as lace, non-woven fabrics, silicone, TPU, PU, etc., with various styles and support for customization. The lace nipples we produce are made of high-grade lace material, which is comfortable and close to the skin, delicate and beautiful, and has various shapes and colors, which are deeply loved by many women. Choose us, you will get the best quality service and the most cost-effective products. Don't hesitate, come and contact us!
Multimasz company offers a new and original, electromagnetic multi-disc clutch Ema Dessau 3 KL 10; as well as 3KL: 1,25; 2,5; 5; 20; 40; 80; In our offer you can find other types of Ema Dessau clutches: 4KL1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; KLDO 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; 160. Herewith you will find also the clutches of following manufacturers: Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Stromag N, W, L, F, LD, ND, FD, SW, SN, SF, EKE, ESD, EMD, EFL, ERD, EDE, ELN, EFK, EMB, ZAA, ZBA, ZCB, ZDB, ZEA, ZGB, EZA, EZB, EZD, EZE, EZL, EZM, EZX, EDE, E, KMK, KRE, KRD Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... Beside this we offer various spare parts for clutches & brakes: brush holders for dry & oil operation, brake & clutch discs (steel or friction discs), clutch drivers, coils and levers. It has to be also mentioned that we have a huge stock of spare parts, accessories and equipment for machine tools. We can also produce machine parts according to customersâ?? drawings, or repair their old ones. Please visit our website. z
We are pleased to offer you a new, electromagnetic multi-disc clutch Ema Dessau KLDO 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; 160. In our offer you can find other types of Ema Dessau clutches: 3KL1,25; 2,5; 5; 10; 20; 40; 80; 4KL1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; Herewith you will find also the clutches of following manufacturers: Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Stromag N, W, L, F, LD, ND, FD, SW, SN, SF, EKE, ESD, EMD, EFL, ERD, EDE, ELN, EFK, EMB, ZAA, ZBA, ZCB, ZDB, ZEA, ZGB, EZA, EZB, EZD, EZE, EZL, EZM, EZX, EDE, E, KMK, KRE, KRD Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... It has to be also mentioned that we have a huge stock of spare parts, accessories and equipment for machine tools. We can also produce machine parts according to customersâ?? drawings, or repair their old ones. Please visit our website. Beside this we offer various spare parts for clutches & brakes: brush holders for dry & oil operation, brake & clutch discs (steel or friction discs), clutch drivers, coils and levers. z
Multimasz company offers new, original, electromagnetic multiple-disc clutch Ema Dessau KLDO 5; and other KLDO clutches: 0,63; 1,25; 2,5; 10; 20; 40; 80; 160. In our offer you will find following Ema Dessau clutches: 3KL1,25; 2,5; 5; 10; 20; 40; 80; 4KL1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; In our warehouses we have a huge stock of completely new, original clucthes and brakes of the most recognizable manufacturers: Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Stromag N, W, L, F, LD, ND, FD, SW, SN, SF, EKE, ESD, EMD, EFL, ERD, EDE, ELN, EFK, EMB, ZAA, ZBA, ZCB, ZDB, ZEA, ZGB, EZA, EZB, EZD, EZE, EZL, EZM, EZX, EDE, E, KMK, KRE, KRD Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... We offer different spare parts for clutches & brakes: brush holders for dry & oil operation, brake & clutch discs /steel or friction discs/, levers, clutch drivers, coils. It has to be also mentioned that we have a huge stock of spare parts, accessories and equipment for machine tools. We can also produce machine parts according to customersâ?? drawings, or repair their old ones. Please visit our website. z
1.Sand Mill for Dyestuff instruction:The sand mill for dyestuff is a horizontal sander.Horizontal sand mill is a high-efficiency wet superfine grinding and dispersing machine widely used in non-metallic mineral industry such as paint,Website:http://www.sfjxsandmill.com, dye, paint, ink, medicine, magnetic powder, ferrite, photographic film, pesticide, paper-making and cosmetics. The horizontal sand mill can be divided into ordinary horizontal sand mill, wheel pin horizontal sand mill, toothed disc horizontal sand mill and turbine horizontal sand mill according to different structures.2.Features:The sand mill for dyestuff has advanced design concept and closed continuous production, which can make the production process environmentally friendly. The product has fine grinding, uniform fineness, good quality and high production efficiency. The material is produced in a closed state, which effectively prevents the dry crust and solvent evaporation of the material. Double mechanical seal, double protection, zero leakage. The new dynamic separation structure makes the discharge more smooth and less wearing parts.3.Specifications:ModelSW-15SW-30SW-50SW-100SW-200Volume(L)153050100200Beads(mm)0.8~2.50.8~2.50.8~2.50.8~2.50.8~2.5Motor Power(kw)1518.5304575Weight(kg)85010501350195022404. Product Advantage:�Dynamic gap is made of special alloy steel and it is self-cleaning, non-clogging, abrasion-resisting.�The sand mill for dyestuff is made of a mechanical seal made by the world-leading BORGMANN company. The surface of the moving and static rings is made of silicon carbide, and the O-type ring uses PTFE to withstand the corrosion of highly corrosive solvents.�In order to solve the special requirements of users, the  sand mill for dyestuff is optional for several materials, such as zirconia, composite materials, which have lots of excellent characteristic such as resistant to solvent, zero pollution, highly wear resistance.5.FAQ: Q1. What is your terms of packing?A: Generally, we pack our goods in plywood cases. Q2. What is your terms of delivery?A: EXW, FOB, CFR, CIF.Q3. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.Q4: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit;6.Our Company:The company covers an area of about 15,000 square meters, and the plant area is about 8,000 square meters. The annual production capacity of the company is over 30 million. In terms of delivery, the production is started after the deposit is paid. The production time is determined by the number of equipment. After the completion of the payment, the goods are delivered after delivery, and the delivery is generally completed within 30-40 days.In the country and the well-known Nippon, three tree paint, Bardez paint, etc., have a long-term cooperative relationship.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, which is formed by pressing the mold and sintered at high temperature in vacuum. Hydrogen production by water electrolysis is a new energy pillar sunrise industry. The micropore diameter of the porous titanium plate is used to fully react with the medium to produce hydrogen energy. The surface is coated to prevent oxidation and increase the efficiency of hydrogen production. Porous titanium plates are widely used in hydrogen energy, petrochemical, and pharmaceutical filtration, with obvious advantages, and are indispensable products. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300 Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments. Applications The porous titanium plate is used as the GDL (gas diffusion layer) of the anode for hydrogen production by water electrolysis in PEM water electrolysis. The pores are uniform and the porosity can be controlled at 30%-40%. Good electrical conductivity and strong corrosion resistance. It can be coated with platinum group metals to enhance its catalytic performance. The cost is relatively high, but the hydrogen production efficiency is high and the purity is high, which is suitable for industrial hydrogen production. Every kind of filter material will be blocked, so it is very important to choose the pore size. If you choose the right pore size, you will have a good filtration efficiency, and the blocking situation will be alleviated. If the blockage is serious, regular replacement can solve this problem.
Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens. Elimination Efficiency:above 98%. Flexible Structure. Features of Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens: 1.Ingenioius Design a. Patented LVCHENG  Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens (ESP), where hyper-dense electrons are generated to capture airborne fume & grease particulates. b. Patented cylindrical honeycomb electrostatic fields and two-side fixed cathode needle , maximizing the removal and disposal efficiency of airborne fume & grease particulates. c. Modular design, ensuring easy assembly of our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens for total operation and easy removal of the electrostatic purifier and other major components for maintenance and cleaning. d. patented high frequency, high voltage and high power of our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens which can make gergy-saving,envirment-friendly,working stable and reliable e. Perfect control circuit make sure our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens with sofe start,constant current transmit,the function for short-circuit protection, high voltage open circuit protection,overload protection,several-times electrical discharging protection f. wind-average hole net device, make sure oil-mist can go into static electrical field in average level, making every our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens can reach top purify effiency. g. Professional CNC machining equipment, beautiful surface panel of our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens. 2. High Disposal Efficiency An average disposal efficiency of above 85% (1 stage of electric field) and 98% ( 2 stages), is guaranteed on our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens. 3. Wide Application fields Our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens are ideal kithcen ventilation products for large kitchen& canteens in restaurants, hotels, supermarkets, shopping centers, business centers, enterprises and business organizations, etc. 4. Strict Quality Control ISO9001:2008 tested quality control system. CE verified products performance. 5. Hassel-Free a.One year free repair and lifelong maintenance of our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens guaranteed. b.Low altitude emission of the processed air guaranteed, no complaints will be incurred after using our Electrostatic Oil&Mist / Fume&Grease Purifier for Commercial Kitchens. c.No ozone generated during the operation of our electrostatic Oil&Mist / Fume&Grease Purification System for Restaurants.
Accurate sensor 3000TD-E for India power system by Yoyik The company has a large flow, high discharge pressure, good performance, high efficiency, long life, high reliability, special for the technical valve products. Our company's main products: hydraulic machinery and components, hydroelectric generating units; coal-fired generating units; generating units; electrical and electronic products processing; mechanical parts processing. Mainly engaged in the power industry host (steam turbine, water machine, boiler, turbine) accessories, spare parts, spare parts, auxiliary equipment and environmental protection equipment. Yoyik can offer many spare parts for power plants as below: #DF-sensor 3000TD-E-DF bimetallic strip thermometer WSS-11 Bolt electric heating rod ZJ-22-3(R) Convertor PR9268/201-000 Control system LVDT HL-3-200-15-G POWER SUPPLY SCN-1000-24 vacuum switch 1201180 LVDT valve GV ZDET300B power supply NKYI-S-400/Q-ZT 305 DC voltage transmitter TUd-D-201 absolute expansion sensor TD-2Y-50 Eddy Current Sensor PR6424/101-001 Electrical actuator with motor ZHB800-25 vibration monitor CZJ-B3 displacement gauge C9231118 Sensor DF310580-50-02-00 LVDT sensor TD-1 0-100mm Displacement transmitter LTM-4-D1 Pressure Transmitter ESP 3051TG2A2B21A Displacement Sensor (LVDT) for RSV HTD-400-6 Eddy Current Sensor PR6423/001-130 Shaft Displacement Transmitter JX5111-02-50 FOXBORO Card FBM224 LVDT transmitter XCBSQ-04/100-01-02 probe GJCF-15 speed sensor D-065-03-01 Eddy Current Sensor PR6422/101-040 best oil tank gauge UHC-DB Eddy Current Sensor PR6423/004-020 MOV SND-Z60-18 S position detection sensor HTD-100-6 FLAME DETECTOR PROBE ZFDT-T1B0V-2800 Sensor DF310880-90-05-00 Drain HP heater WSS-58/W LVDT sensor DET-50A temperature controller for dry transformer BWR-906 L9 axial displacement amplifier CWY-DO-810505 sensor 3000TD-E
Equipment introduction: Four-shaft shredder is developed based on market demand products. It adopts automatic control of microcomputer (PC) to set automatic start-up, stop, reverse and overload reversing control functions. It is mainly used for shredding light and thin metal with certain strength and waste garbage to increase its packing density for transportation and re-use . Performance characteristics : 1. Large torque, high yield, no manic, resistant to wear, etc. 2. Can to sharply reduce chip processing of iron filings volume. 3. Chip, horizontal double roller crusher can make the chip drying, briquetting, smelting, and broken, in the early period of the chemical fire prevention materials handling and pneumatic conveying becomes easy. 4. To cut broken down strips of metal processing tool cutting, spiral, sheet of metal scrap. 5.This Scrap metal shredder is the idea machinery for Ferroalloy smelting, metal steel scrap, scrap iron, scrap metal and scrap recycling companies. 6. This scrap metal crusher machine can be equipped with conveying feeding device. Working principle and structure: Using of high-torque blades for physical cutting, tearing, sawing and other means in the closed silo to the initial shredding materials, and then Tongli original screening technology, screening out the size of the material to meet the requirements; does not meet will automatically back to the material Continue processing. Application field: Metal shredder is widely employed to crush paint bucket, discarded appliances shell (plastic shell, metal shell), large pipes, pipe fittings, forklift pallets, tires, drums, aluminum and copper, as well as being used to crush iron sheet, scrap circuit board,and so on. Applicable material range: Paper making derived waste, cartons, paper rolls, wood; · Plastic barrels, plastic electrical shell; Metal cans, thin-walled metal buckets, metal shell of appliances; � circuit boards, mixed light industrial waste; Carpets, woven bags, household garbage sieve; Light construction waste, medical waste; Biomass and alternative fuel preparation industries; Particularly suitable for crushing the particle size of the higher applications; Broken material is smaller or medium-sized uniform size sheet.
hydraulic filter element cross reference FAX 400*10 filter change oil by Yoyik YOYIK professional production and processing. Deyang YOYIK strong technical force, technical experience, good at operating the technical backbone of many, for hundreds of thermal power plants, hydropower stations, metallurgical enterprises overhaul to provide quality equipment selection, construction design, installation commissioning, after-sales service, and provides A lot of accessories and so on. Deyang YOYIK for power plants, steel accessories are as follows: Yoyik can offer many spare parts for power plants as below: #DF-hydraulic filter element cross reference FAX 400*10 filter change oil-DF caterpillar oil filters LQ01-2 actuator inlet filter (flushing) creta oil filter LY-38/25W-33 cost to replace fuel filter jiffy lube uni air filter oil 21FC5121-160*600-25 100 micron stainless steel filter XU-A100*50S filter element TZ-63*1 filter steel mesh LXM-15-14.5 lube oil filtration strainer filter manufacturer TZX2-250*10W top oil filters LH0660D020BN/HC hydraulic filter types DZ903EA10V/-W lon Exchange Resin Filter hydraulic tank suction strainer TZX2I-100*40 oil and filter change cost ZX-63*180 high quality hydraulic oil filter HC5020F2016H furnace oil filter 0660R010BN4HC stainless steel filters strainers DZJ Filter Discharge 10 micron filter element UE610AN40Z strainer hydraulic DQ6803GA20H1.5C jacking HP filter Oil filter PA810-X-0310A EH oil precision filter hydraulic and lube filtration LH0240D5BN3HC hydraulic filter drawing 01-094-002 deacidification filter hydraulic suction 21FH1330-60,51-50 hydraulic filter assy 2600R005BN4HC hydraulic oil transfer pump with filter TZX-E100*5Q top rated oil filters SFX-850*201 outlet filter activa oil filter 1200498 stainless steel pleated filter cartridge HTGY6E.0 Regeneration Device Diatomite Filter Element hydraulic filter dimensions DL001001 EH oil pump outlet strainer in line oil filter ST630-00-V hydraulic tank suction strainer HX-250*40Q dehydration filter duplex lube oil filter HX-40*10 Hydraulic Filter hydraulic oil filter system QF6803GA20H1.5C hydraulic oil station filter oil filters near me TZX1-10*10 oil press filter FBX (TZ)-630*10 Steering engine filter high quality hydraulic oil filter QTL-6027 oil pump discharge filter (flushing) cheap and best water purifier KLS-125T/60 Filters element ss cartridge filter FBX (TZ)-25*1 High pressure filter hydraulic oil filtering machine SDGLQ-25T-100K oil filtration systems HC9020KKN8Z ELEMENT FILTER OIL STEAM TURBINE hydraulic filter interchange SFX-660X30 governor inlet filter hydraulic return line 0250 DN 025 W/HC industrial oil filtration systems JLX-45 FIRST STAGE FILTER MY-DFYL-2024-4-28
Laboratory DC Power Supply Adjustable Voltage Regulator Stabilizer Switching Variable Bench Source 30V 10A AC 110V 220V wanptek There are included 5 packages: 1.3010D DC power supply with power display 30V 10A(Three-digit display 0.1 V/0.01 A) 2.3010DF DC power supply with power display 30V10A(Four-digit display 0.01 V/0.001 A) 3.605D DC power supply with power display 60V 5A(Three-digit display 0.1 V/0.01 A) 4.605DF DC power supply with power display 60V 5A(Four-digit display 0.01 V/0.001 A) 5.1203D DC power supply with power display 120V 3A(Three-digit display 0.1 V/0.01 A) Specifications: DC power supply is a single output, high-precision dual display switching DC power supply. The machine has complete operation protection function, high efficiency, low ripple, high stability and small volume. Current limiting protection protects the power supply and load from accidental damage. series power supply has temperature control circuit and low intelligent heat dissipation noise. The series of switching power supplies for measuring instrument have ruled out the inconvenience of bigvolume and heavyweight of a traditional power supply possess. Four adjustment buttons,The output voltage and current respectively is controlled by two variable resistors with coarse and fine regulation for morehandy and precise adjustment. 1.High efficiency and sufficient power 2.Low ripple, small size and light weight 3.Double LED display of voltage and current, high precision 4.Stable voltage, limited current and simple operation 5.Double voltage input, convenient selection 6.Temperature controlled fan for heat dissipation, low noise and long service life 7.Output Voltage ranges from 0 to rating voltage with continuous adjustment . 8.Output current ranges from 0 to rating current with continuous adjustment 9.Short circuit protection function, short circuit stop output,overload protection,over temperature protection. 10.AC 110v and 220vcan work, rest assured to choose. Input voltage: AC 230V / 115V 10%; 50Hz / 60Hz. Output voltage stabilizing value:0-30/0-60V/0-120 continuously adjustable.(Optional) Output constant current value: 0-10A/0-5A/0-3A continuously adjustable.(Optional) Ripple voltage: VPP 1% Overall efficiency: 89%. Digital display: three LED digital tube double display. Display resolution:0.1V/0.01A/0.01V/0.001A.(Optional) Display accuracy: 1% + 2digits. Working temperature: (- 10 45) Storage temperature: (- 20 60) Relative humidity: 90% (40 5 ). Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 1x Test line (Gift 1x Instructions
abrasive garnet sand 60, 80, 100,120 for waterjet cutting machine Garnet / Garnet Sand BV Our garnet is a kind of hard rock garnet (Almandine), we process the garnet abrasive according to the international standards to meet with the requirements from different customers. We usually process the garnet abrasive with the sizes of 12-20 mesh , 20-40 mesh , 30-60 mesh , 24 mesh , 30 mesh , 36 mesh , 60mesh , 80 mesh , 100 mesh , 120 mesh , etc .Which are widely used in Sandblasting , Water-jet cutting , Bonede/coated abrasive , Water filtration and Anti-slipping material etc. Typical Size Analysis Mesh MM Percentage Retention Typical(%) - - 8/12 12/25 20/40 30/60 80 100 8 2.360 0 12 1.700 0-3 14 1.400 10-21 0-1 18 1.000 70-85 12-25 20 0.850 0-7 30-45 0-5 30 0.600 0-3 30-50 50-70 0-5 40 0.425 3-11 10-20 15-30 0 50 0.300 0-10 40-60 15-30 60 0.250 10-25 20-30 80 0.180 5-10 20-50 0-10 100 0.150 5-10 20-40 120 0.125 40-60 140 0.106 5-20 Company Information Company information Henan Sicheng Abrasives Tech Co., Ltd the manufacturer, is a comprehensive joint-stock company integrating production, R&D and trade. Our company enjoys a good reputation for our best quality and service. 3.jpg Packaging & Shipping Packaging: 1)Normal packing,25kg PVC bag,40 bags in a big bag for 1000 kilograms. 2)Special packing or marks,please list them in your E-mail. Shipping: Shipped in 1 day after payment Why choose us Why choose us Why.png FAQ FAQ 1. Q: Do you provide free sample? A: Yes, We provide sample for free but the freight will be on your side. 2. Q: Do you receive L/C payment terms? A: Yes, we do. 3. Q: When will you deliver the goods? A:Within 5 days after payment in general. 4. Q: Can you customized package according to customer? A: Yes, We can do OEM products and package, tailored products provided according to your requinments. 5. Q: Are you a manufacturer or trader? A: We are the manufacturer. 6. Q:How do you check all the goods in the production line? A:We have spot inspection and finished inspection. We check all the goods when they go into next production procedure.
FilterERB11BFC/12 for power system a strong manufacture and trade company. We have a wide range of mechanical parts and components generator parts, electrical and electronic products processing, hydraulic machinery and components, hydroelectric generating units, coal-fired generating units, especially professional accessories for generator units. The goods are absolutely authentic, rest assured. Need more products for power plant now if you don't know where to search a product. DF-FilterERB11BFC/12-DF filter pressure hydraulic CFRI-250 40 Lubrication Oil Station Discharge Filter RFA-400 20FY filter hydraulic servo Q3U-H630 3FS globe valve repair kit FCV6-16V-S-O-NV ER10707150010 EH oil precision filter TX-80 LEVEL GAUGE BALL BEARING SINGLE ROW RADIAL DEEP GROOVE 6205 ZZ Gasket of Bellows Globe Valve J41H-40DN50 Shaft Vibration Protecting Unit CWY-DO-813503 SOLENOID VALVE FOR STOP VALVE AND GOVERNING VALVE 4WE10G31B/CW220RN9Z5L hydraulic oil filters ZU-E100 30S hydraulic return filter NX-25 30 oil press machine with filter NX-25 3 Single stage clean water centrifugal pump DFB125-80-250 hydraulic filter testing GLC3-4/1.6 centrifugal pumps head YCZ65-250B oil feeder filter FBX (TZ)-100 30 pressure hose SMS-15/20-305mm-B lvdt displacement transducer TDZ-1-21 pressure hose S110-AC-AC-0040 bulk oil filters QYLX-63 5Q2 FilterERB11BFC/12 Steam turbine high temperature sealant COPALTITE 5 OZ hydraulic cartridge filter LH0950R5BN/HC Sector Plate Lifting Mechanism AH-1000 Fuel Supply Device test solenoid valve 22FDA-F5T-W110R-20/LP pressure hose SMS-12/15-1219mm-B industrial centrifugal pump DFB100-65-260-03 oil press filter PQI-H150 5Q3SIII sealing oil system filter HC8900FKS39H hydraulic filter price SGF-H160x20F screw cartridge heater ZJ-22-28 pressure hose SMS-12/15-3048-B solenoid valve D12T11GOP 110VDC 8W 3-10bar One phase transformer ZDG-0.5 solenoid valve barb CCP230M 19W 230VDC End Cap Hydrogen Sealing Sealant T20-75 32mm Eddy Current Sensor TM0180-A08-B00-C09-D05-E01 cartridge stainless steel filter housings HX-10 3 solenoid valve manifold 4WE6J61/EG24NZ5L shaft sleeve LK45/CZ65-250-4 filter hydraulic NLX-250 10 filter pressure hydraulic SFDVA-20-1 double cartridge filter HC7500SK78H contactor CK85BA300 air filter production line DC-3 DFYL-2022-8-24-ZJ
What is a spiral wound tube heat exchanger? Spiral wound tube heat exchanger, also known as threaded tube heat exchanger, turbulent heat exchanger, double bellows heat exchanger. It is a new type of shell and tube heat exchanger. Each heat exchange tube is evenly wound in the heat exchanger shell according to a certain rule. According to the different interface structure, it is divided into L type and Y type. According to whether it can be disassembled, it can be divided into detachable type and non-detachable type. Type: Y type,T type,detachable,double tubesheet, cold trap, gas-liquid separation etc. Material:austenitic stainless steel 316L, double-phase stainless steel 2205, 2507, pure titanium, zirconium, Hastelloy alloy, etc. Tube type:Spiral wound tube/parallel tube/U type tube Tube: �¦8ï¼?�¦10ï¼?�¦12, �¦14ï¼?�¦16,�¦19ï¼?�¦25etc. Maximum working pressure:4Mpa Heat exchanger area:0.1-1000 square meters working temperature:-20-300 degree celsius (customizable) Applicable fluids:steam, circulating water, frozen brine, glacial refrigerant, glycol;. installation type:Horizontal/Vertical Function:Heater, cooler, condenser, evaporate, distillation, rectification Application:Distillation reflux system, concentration system, distillation system, waste gas and heat recovery system, traditional Chinese medicine extraction system, instantaneous sterilization at high temperature, CIP cleaning system, civil HVAC system,heating and cooling of process materials Customization:According to the technical requirements of customers, we can accurately customize the winding tube heat exchangers with various spacing. Package:Standard export wooden box,can be packaged according to customer requirements. Advantages: 1.High heat transfer coefficient :Unique wound tube bundle optimizes the flow state of the fluid on both sides 2.Long service life spiral :The elastic tube bundle can effectively absorb stress and vibration, prolong the service life of the heat exchanger 3.Low scaling tendency :Thereâ??s no dead angle in the heat exchanger, and the tube side and shell side can be emptied; the high flow rate design of the shell side can effectively reduce the probability of scaling on the surface of the heat exchange tube 4.small floor space: Compact structure,about 1/5 of the traditional heat exchanger 5.Low operating cost : Under heat conditons ,it can save the steam ;under the condensation conditions,it can improve the recovery rate. � Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum frying machine. If you need any of them,please donot hesitate to let me know,I will reply you ASAP.
RZL series oil purifiers are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil This kind of oil purifier can purify contaminated lubrication in which much water, gas and many impurities exist. RZL series can rapidly remove water, gas, particular matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system. It is especially suitable for industries including petroleum, chemical, mine, metallurgy, power, traffic, mechanical manufacture and railway for the recovery and purification of various lubricating oil such as hydraulic oil, mechanical oil, cooling oil, refrigerating oil, gear oil, gasoline engine oil, diesel oil and heat treatment oil. Characteristics 1) Perfect capacity of removing impurities. The special filters made by JunNeng are made of special materials which can effectively and rapidly eliminate various impurities, water and gas. 2) Automatic reverse flushing ability, which automatically cleans the mass impurities withheld by the purifier. 3) Advanced medium heating absorption and condensation system 4) Pressure protection, auto heating temperature control, device of auto separation of condensate water, easy to handle, safe and reliable. 5) Top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime. 6) Unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil. 7) Imported parts are used for all electric system, which ensures operation of the equipment with high performance 8) Lowly noisey oil pump is specially made.. Technical Parameters Name Unit RZL-20 RZL-30 RZL-50 RZL-70 RZL-100 RZL-150 RZL-200 Flow L/min 20 30 50 70 100 150 200 Vacuum Range Mpa -0.06~ -0.095 Temperature Range 60~80 Oil pump pressure Mpa 0.4 Power Supply 50HZ 380V Total Power kw 25 28 37 47 56 68 78 Cleanliness NAS NAS 6 NAS1638 Water content in oil ppm 100 Mechanical impurity % no Working Noise db(A) 65 85 inlet (outlet) diameter mm 25 25 32 32 42 50 60 dimension mm L 1980 2005 2250 2300 2450 2800 3200 W 870 870 970 1050 1500 1400 1500 H 1600 1680 1880 2000 2100 2300 2400 Dimension and weight will be changed with changing the technical specification.
