1. Increased MPPT charging current comparedwith conventional controllers, due to ultramodern controller technology (microprocessor)by 10 % to 30 % (efficiency > 95 %) 2. Switchable characteristic lines of chargingfor optimum charging of Gel/dryfit/AGM/fleece or acid/lead-acid, as well asLiFePO4 batteries . 3.MPPT controller Two Battery Charging Ports: Automaticcharging of the main battery or board battery (Board I): Support charging and trickle charging (max.1 A) of the vehicle's starter battery (Start II) with overcharge protection 4. Unattended Charging: Standard protectionagainst overload, overheating, reverse battery and back discharge of the battery(in case of insufficient solar power, such as at twilight, at night etc.). 5. Overcharge protection: Reduction of thecharging current of the battery in case of excessive solar power and full battery. Immediate recharging in case ofpower consumption to ensure always the best possible charging state of the battery. 6. Connection for temperature sensor ,Automatic adaptation of the charging voltage to the battery temperature. Incase of low outside temperatures, full chargingof the weaker battery is improved, and in case of summery temperaturesunnecessary battery gassing will be avoided. This is highly recommended, if the batteryis exposed to strong variations in temperature, such as in the motor compartment
We're offering solar charge controller. -
The KING SC-101224 continues the huge success of one of the most used SHS (Solar Home System) controllers. With a power range to 10A at automatically recognised 12V or 24V. It fits to a system size of maximum 240W. The latest charging technologies, combined with a new state of charge determination which has been significantly improved once again. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. Product Features - Microcontroller digital accuracy - PWM control- Multistage charging technology - Load disconnection depending on LVD - Automatic load reconnection - Temperature compensation - Common positive grounding on one terminal - Integrated data logger(optional) - Night light and morning light function -Integrated self test - Automatic detection of voltage Displays - Graphical LCD display - for operating parameters, fault message, self test Operation - Simple meun-driven operation - Programming by button - Manual load switch Certificates - CE compliant according EN61000-6-1 and EN61000-3- RoHS compliant - Manufactured according to SIO9001 and ISO14001 Electronic protection functions - Overcharge protection - Deep discharge protection - Reverse polarity protection of module, load and battery - Automatic electronic fuse - Short circuit protection of load and module - Open circuit protection at nigh t- Reverse current protection at night - Overload protection - Battery over voltage shutdown For more details----http://www.king-inttrade.com/SC-101224.html
Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Specially design for solar-public electricity system, which is in exchange of the solar system, it has power switch where there is a shock by the battery or utility grid, and also the utility grid supply charging module. Its energy saving, and also ensures the power supply. It also has the same function of eprc. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof Packing:1pc/color box, 50pcs/carton, carton size:51&31&21cm.Gw:13.5kgs, nw:12.5kgs
Application: Repower c series solar charge controller is designed for solar system application, it can charge the battery intelligently in the daytime, and discharge to offer 24-hour current in dc system.Or control the system output time manually, the Pwm Sdpc-sp-40a Pwm Sdpc-sp-50a Pwm Sdpc-sp-60a Pwm Rated charge current 30a 40a 50a 60a Rated load current 30a 40a 50a 60a Work voltage 12v; 12/24v auto Over load, short circuit protection 1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. ¡ý3 rated load current short circuit protection action. No load current ¡ü6ma Charging circuit voltage drop ¡ü0.26 v Load circuit voltage drop ¡ü0.15 v Over voltage protection 17v; ¡á2/24v Work temperature Industry stage:-35¡ãc to +55¡ãc; Boost charge voltage 14.6v;¡á2/24v; (keep 10min) Direct charge voltage 14.4v; ¡á2/24v; (keep 10min) Float charge voltage 13.6v; ¡á2/24v; Charge return voltage 13.2v;¡á2/24v; Temperature compensation -5mv/¡ãc/cell (boost charge, direct charge, float charge, charge return voltage); Lower voltage indicate Size:185*105*55mm Weight:1.32kg
PWM dimming series (SR-LP) 1. PWM digital dimming technology. 2. Can support 8 sessions dimming. 3. Double digital LED display and key. 4. PWM dimming indication. 5. Use combine with the constant current source. 6. The full power and half power working time can be set separately. 7. Various protections Parameter: Model: SR-LP series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage: 12V ,24V ,12V/24V Auto No load losses:
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Max Charging Current - 5A Charger Type - MPPT L*B*H - 100*83 Housing - Metal Input Voltage - 12V / 11.1V / 12.8V
PWM Frequency: 40 K Hz Solar Panel Maximum open circuit voltage: 25 volts. Charge control Efficiency: Greater than 85 %. Ambient Temperature: 0- 40 C. Storage Temperature: 0-80 C. Charge Controller Dimensions: 100 X 83 mm. Protections: Battery over charge Protection Battery deep discharge Protection PV reverse voltage Protection Battery reverse voltage polarity protection Load ON/OFF: In the CC left corner there's a jumper. If the jumper is plugged in the Load will turn OFF. If the jumper is plugged out Load will turn ON Indications: Red LED: Indicates Battery low Green LED: Indicates Charging and Battery full. Yellow LED: Indicates Load ON/OFF
Max Solar Panel Voltage - 50V Max Charging Current - 10A Charger Type - PWM L*B*H - 100*105*35 Housing - Metal
Max Solar Panel Voltage - 50V Max Charging Current - 15A Charger Type - PWM L*B*H - 100*105*35 Housing - Metal
Max Solar Panel Voltage - 50V Max Charging Current - 15A Charger Type - PWM L*B*H - 100*105*35 Housing - Metal
Max Charging Current - 5A Charger Type - MPPT L*B*H - 100*83 Housing - Metal Input Voltage - 12V / 11.1V / 12.8V
We are one of the most noted organizations engaged in offering MPPT Solar Charge Controller. This device is used in effective conversion of high voltage DC output from solar panels (and a few wind generators) down to the lower voltage that is needed to charge batteries. These optimization devices are precision engineered by technical experts are in conformation with industrial standards. Features: High efficiency DIN Rail compatible Negative ground
We hold strong market reputation in offering MPPT Solar Charge Controller. This electronic equipment is designed and developed at par with recommended industrial specification. Our product is offered in proper packaging and requisite current specifications to the clients. Further, this device is available at industry leading rates. Features: High performance Operational fluency Accurate positioning
With our years of expertise and skills in this field, we are providing a large array of Maximum Power Point Tracker. The product we provide is used in solar electric charge controllers. This Maximum Power Point Tracker extracts maximum available power from PV module. Features: Completely tested Top notch quality Reasonable price
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.