Molten Metal Splash Protection Suit Suppliers and Manufacturers

Interesting design and unique colors combine to make this sideboard a trendy piece of furniture. The black doors complement the color, the knobs, and the mandala pattern look magnificent together! It is carved out of mango wood and metal, mango wood makes it a sustainable product whilst iron ensures unmatched durability. The raw finish adds to making this product a phenomenal choice. It enhances all colors and patterns. It is suited for bedrooms, living rooms, hotels, inns, guest houses, cafes, etc

Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.

Spruce is light and soft, but nevertheless has good strength and elasticity properties for its relatively light weight. It is not very susceptible to shrinkage and when dried remains stable. Its low natural durability can be compensated for by applying a protective coat of paint. Sourced from meticulously selected spruce trees, our Spruce Wood for industrial purposes is of the highest quality. Each piece of wood is processed using advanced techniques to ensure consistency and durability. Available in various dimensions to suit different industrial requirements. Responsibly harvested and processed to meet environmental standards

We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

Discover our airtight metal boxes, featuring exclusive designs that blend art and practicality. Perfect for storing food items like nuts, cookies, or any small articles, keeping them fresh thanks to their airtight seal. Made from durable metal Unique and vibrant designs Airtight seal for maximum protection Availability: 83,997 units Price: 1/unit

PRODUCT INFO Puffball mushrooms range from small to very large in size, averaging 10-70 centimeters in diameter, and are round, oblong, to oval in shape. Some species are small, golf-ball sized, while others can grow as large as soccer balls. The white fruiting body can be smooth or bear some small scales, warts, or spines and is firm, airy, and spongy. There is also a protective coating that helps keep debris and dirt from entering the flesh. When sliced, the flesh should be pure white and never have any color. Puffball mushrooms are white when young and transition to a yellow-brown when mature and are rendered inedible when they reach this state. There are little to non-existent stems, and the spores are produced internally in the fruiting body. When young, Puffball mushrooms have a mild, nutty, and earthy flavor. Puffball mushrooms contain some phosphorus, manganese, selenium, and clavacin. USES Puffball mushrooms are best suited for cooked applications such as sauteing, pan-frying, and baking. Referred to as the �¢??breakfast mushroom" Puffball mushrooms pair well with egg dishes and are enhanced when sauteing and browned in simple ingredients such as garlic and butter. They can be sliced thinly and rolled with meat and vegetables, chopped into stir-fries, or grilled with marinades. They can also be cut into slices, battered, and fried, sliced and used as noodles in lasagna or ravioli, used as the dough in pizza, chopped into croquettes, blended into hummus, pureed into gravies, or dried and ground into a powder to use as a flavoring agent. The rotund mushrooms can be substituted for tofu or eggplant in many recipes. The flesh readily absorbs accompanying flavors so oil should be used sparingly. Puffball mushrooms pair well with tomatoes, broccoli, beets, rutabagas, radishes, turnips, parmesan cheese, garlic, poultry, scallops, crab meat, and tuna. They do not store well and should be used immediately after harvest. They can also be frozen between sheets of plastic and stored for extended use. Season Puffball mushrooms are available in the late summer through fall.

Price: 1.3 ~ 3.9$/pcs Size: Customized size Material: Non-woven/ PP/ SMS Packing: 1 pcs/OPP bag - 50pcs/ Carton Color: White, Blue Quantitative: 40/45/50/55/58 gsm Surgical gowns: Level 2, 3

Price: 0.49 - 0.52$ / pcs Regular: 35 x 80 cm Long: 35 x 110cm Material : 100% Cotton Color: White, Pink, Navy, Brown, Yellow, Grey... Quantitative: Regular (63g); Long: (67g)

Material: PE, PVC Roll: 1.82 x 100 m; 0.92 x 100 m Sheet: 10 x 10 m ; 3.6 x 5.4 m Quantitative: # 1000 ; # 3000 Color: Blue Packing: dup-rolls (Rolls); OPP Bag (Sheets) Details: eyelets Other: OEM

Pepper export from Vietnam is considered as the biggest supply all over the world, contributing 1/3 of global production and over 50% of trade volume (about 150,000 tons per year). CET GROUP JSC is one of the leading exporters in VIETNAM Understanding that quality is the key to ensure long-term and repeated orders, our experienced team is working hard with supported by many big Manufacturers in Vietnam with the most modern technology imported from Europe and two dedicated cleaning lines, a steam sterilization machine. We can commit a high standard of pepper to specific requirements. - Capacity: 20,000 MT per annum. CET GROUP JSC can supply all grades of pepper whole including: For Black Pepper: Grades available: Fair Average Quality (FAQ), Machine Cleaned (MC), ASTA 560/570 g/l, 5mm bold, Steam sterilized (HTST), Rainforest Alliance pepper (RA). 500 G/L, 550 G/L, 570 G/L, 580 G/L, 570 G/L BOLD Moisture: 12.5% max Foreign matter: 0.2 - 1% For White Pepper: Grades available: White pepper 630 G/L DW FAQ, White pepper 630 G/L DW machine cleaned, White pepper 630 G/L DW steam sterilized (HTST). Moisture: 12.5% max Foreign matter: 0.2 -1% Black bean: 3% max PACKING: With the automatic packaging line controlling metal, our facility can supply all size of packaging from slack bags of 25 kg, 50 kg, 60 kg or 50 lbs to bulk bags of 500 kg, 625 kg, and 725 kg. Packaging materials are PP bag, jute bag or paper bag.

We can supply most common types of coffee beans from Vietnam. We have strived our best to supply best selected coffee beans to global coffee buyers at a competitive price. And we are able to meet customer's various demand from green coffee beans to roasted coffee beans, ground coffee powder of different grinding sizes, instant coffees and instant coffee mixes