Lithium Battery 3 7V For Ad 51B Suppliers and Manufacturers

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface

Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using 99.9% Pure copper tape / strip / foil Cu%99.90 C11000 Cu ETP Min thickness:0.001mm little order can accept Specification of red copper strip we supply: Strip: thick:0.15-3.0mm width:610mm Plate:thick:0.5-3mm width:610mm Length:2500mm

Measuring Range - 0-100% Range of Precision - 70-10% Measuring Precision - 2% Resolution - 1% Data update time - 1s Pulse Rate Measuring Range - 18-250bpm Range of Precision - 25-250bpm Measuring Precision - 3bpm Resolution - 1bpm Data update time - 1s Packing Information Working Size - 7cm*3cm*2.4cm Packing Size - 40cm*37cm*24cm N.W. - 0.075kg G.W - 0.15kg

FINGERTIP PULSE OXIMETER Parameters: Two parameters:SPO2, Pulse Rate. Waveforms: SpO2 Waveform. Features: 1 COLOR OLED display, four direction adjustable. 2 SpO2 and pulse monitoring, and Waveform display. 3 With menu operation. 4 With beep and alarm. 5 Low-power consumption, continuously work for 50 hours. 6 Small in size, light in weight, and convenient to carry. 7 Low voltage alarm display, Auto power-off. 8 Runs on standard AAA batteries. Detailed descriptions of product functions: SPO2: 1 Measurement range: 70%-99% 2 Accuracy: �±2% on the stage of 70%-99%, unspecified(

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Shubhlaxmi industry is a manufacturer/processor and exporter of Black Mustard Seeds. The seeds are packed with its richness and goodness for you to open it up. We bring you the supreme quality of seeds that satiates the end user. The botanical name of black mustard seeds is Brassica nigra and it belongs to the family Brassicaceae. They are small, round, black or dark brown in color. They are native to Middle East but as of now, they are cultivated widely in India. They are commonly known Sarson. Black mustard seeds are mostly used in tempering food. The seeds are added to warm cooking oil which then pops up to add rich flavor and aroma. Mustard sauce is commonly used these days as salad dressing. Black mustard seeds can be roasted to make it into powder to add to pickles. They seeds are bitter in taste; hence when powdered, it should be carefully used. Mustard seeds help in increasing appetite. They can neutralize toxins. They are a good source of minerals and Omega-3 fatty acids. Specification HS Code : 09109914 Grade : Machine Cleaned & Sortex Cleaned Purity : 98%/99%/99.50% Bold & Small Moisture : 7 To 8% Max Total Ash : 6-8% Max Salmonella : Absent/25gms Packing : 5/10/25/50 Kg Net Pp. & Brand Packing Quality Assurance : Sgs,geo-chem Loading Capacity : 24mt In 20'fcl & 26mt In 40'fcl

Product Name: Dried Jackfruit Place of Origin: Vietnam Max. Moisture (%): 3-5% Type: Jackfruit Shape: Piece Drying Process: AD Ingredients: Fresh Jackfruit Flavor: Sweet Color: Natural Yellow Sample: Available Shelf life: 15 Months Packaging Details: Zip bag with carton box MOQ: 300 Kgs Supply Ability: 10000 Kilogram/Kilograms per Month

Product Type: fish Scale Variety: bonito Style: Dried Drying process: AD Shape: Piece Part: Fin, Body Certification: ISO, C / O, HEALTH, PHYTO, .. Packaging: Bulk Life time: 24 MONTHS Weight / kg): 20 In orgin: Viet Nam Product's name: Dried fish scales. Humidity: Up to 13% Drying method: Dry (solar heat) Purity: 3% Methods do: Clean, use only water, do not use chemicals or as required

Our dried carrot products are manufactured on modern lines with advanced technology, carrots after drying retain the original flavor, natural color, nutritional value unchanged. Clean products, ensuring food hygiene and safety, bringing peace of mind - health as well as customer satisfaction. *Specifications: - Color: Light orange - Origin : Vietnam - Process: AD - Size: 5x5mm,10x10mm, 3-5cm - Form: Dried slices, chopped, shredded -------------------

Dried Shiitake Mushroom. Product Type: Dried mushrooms. Part: whole, cut off the stem. Diameter: 3-4cm up. Type: shiitake. Moisture: 12%. Drying Process: AD. Shelf Life: 24 months. Place of Origin: Vietnam. Non impurity, non additives, non GMO. Packing: 500/1000g PA bag, then in 50kgs PP bag or carton, customized. 99 GOLD DATA

Dry salted lime pickles are produced in Asia and Africa. They are particularly popular in India, Pakistan and North Africa. With dry salting, the limes are treated with dry salt. The salt extracts the juice from the fruit and creates the brine. The final product is a sour lime pickle. Spices are added depending on local preference. In India and Pakistan, the pickle is usually very spicy and hot due to the chili added. It is usually eaten as a condiment. Origin: Long an, Vietnam. Type: Salted Green Lime, 6 months old. Ingredients: Lime, water, salt. No other additives. Quantity capacity: 30 tons/Quarter. Min order: 2 tons. Packaging: 6*3 kg NW jars/carton, 665 ctns/ 20' FCL = 11,97 tons.

Dry salted lime pickles are produced in Asia and Africa. They are particularly popular in India, Pakistan and North Africa. With dry salting, the limes are treated with dry salt. The salt extracts the juice from the fruit and creates the brine. The final product is a sour lime pickle. Spices are added depending on local preference. In India and Pakistan, the pickle is usually very spicy and hot due to the chili added. It is usually eaten as a condiment. Origin: Long an, Vietnam. Type: Salted Green Lime, 6 months old. Ingredients: Lime, water, salt. No other additives. Quantity capacity: 30 tons/Quarter. Min order: 2 tons. Packaging: 6*3 kg NW jars/carton, 665 ctns/ 20' FCL = 11,97 tons.

CURIA YG (P33) is a special curdling and thickening agent for yogurt and lassi. It has no added preservative and Mono sodium Glutamate. FEATURES AND BENEFITS â?¢ 100% Natural. Protein and carbohydrate derivative. â?¢ Improves thickness. â?¢ Improves smooth texture. APPLICATIONS 1. First add 2% to 3 % of CURIA- YG(P33) to the milk in cold (40C to 360C) condition. Dissolve it well without Lump formation. 2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring. 3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture. 4. Then keep it in an incubator @ 430 c for 6 hours and transfer it to chiller.

SauMix is a Vegan, Gluten-Free, Plant-based and Non-GMO starch which makes Soups, Gravies and Sauces - Tastier, Smoother, Thicker and Yummy. SauMix has excellent Shear Stability and Water Holding Capacity. SauMix is 100% vegetarian and naturally made product which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS TOMATO KETCHUP & OTHER SAUCE: Mix 3-5 % of SauMix in partial amount of water and completely mix without any lump formation. Then add it along with remaining water to the sauce, after adding all other raw materials. TOMATO SOUP: Mix 2 -3 % of SauMix in required amount of water and add at the last of cooking for Soups. For Instant Soup mixes, Add required percentage of SauMix along with all dry ingredients and mix well. PREMIXES (INSTANT SOUP MIX, KETCHUP MIX, AND SAUCE MIX): Mix 3-5 % of SauMix at the time of blending while adding other raw materials FEATURES AND BENEFITS ï?? Improves thickness of the sauce, soups and ketchups. ï?? Better dispersion of spices and other ingredients uniformly. ï?? Improves smooth texture of sauce, soups and ketchups. ï?? Enhance product's flavor. ï?? Stable high viscosity. ï?? Excellent shear stability. ï?? Excellent water holding capability. During the shelf life, it maintains the consistency and avoiding the water separation. ï?? 100% Natural and 100% vegetarian product. DOSAGE For excellent results, use 3 to 5% SauMix of total batch size.