1)test injecting angle, atomization, dribbling and automatic testing and cleaning Press auto key. The pump start to work automatically, after work over, the pump turn off automatically, the injector keep injecting for 15s, the time valve decrease to 0, can observe the injecting angles, atomization and volume, replace or clean the injector, if appears gush, unusual angels and unusual volume, stop injecting for 30s, and observe injecting volume, time value shows 30s, the liquid will back to the fuel tank in the following 30s, then start dribbling testing for 60s, if no dribbling, the unit will starts regular testing automatically. 2)test mode at idling speed Conduct the injecting test as follows: Injecting rpm: 1600r/min Pulse width: 2.2ms Count: 3000 Timing: 112s When the producer is over, observe the injecting uniformity, and replace or clean it if the volume over 9% 3)test mode at maximum loading Conduct the injecting test as following: Injecting rpm: 4000r/min Pulse width 2.8ms Count 3000 This program can observe the injecting volume at the maximum loading 4)test mode at high speed Conduct the injecting test as following: Injecting rpm: 6500r/min Pulse width 2.5ms Count 4000 Timing 36s This program can observe the working state at the high speed. 5)test injecting with complete procedure During this procedure pulse width is 2.2ms, rpm is 1600r/min, then the rpm will up to 9975r/min, pulse width will up from 3ms to 12ms, then down to 1.1ms.Total cycle is 5 times, and running time is 20s, observe for 30s after the test, then the liquid will return for 30s. During the automatic test, press selection to pause it as you need. 53.5*48.5*55.5
1) Un-mounted Single-element Scan Lenses, STSL Series STSL scanner lenses specially designed and optimized for use in CO2 laser 2-axis galvo-scanner systems with full beam diameters of up to 15.0mm. 2) Mounted Single-element Scan Lenses, STDC Series. 3) Mounted 2-element Scan Lenses, STC Series The mounted 2-element scan lenses are 2-element designs for CO2 laser beams up to 15mm diameter, supplied complete in a mechanical housing.
STSL scanner lenses specially designed and optimized for use in CO2 laser 2-axis galvo-scanner systems with full beam diameters of up to 15.0mm. Mirror sets appropriate for use with beam diameters up to 15mm require an increase in mirror separation in comparison with smaller mirrors. These changed optical conditions are catered-for by the STSL series. These single-element lenses are designed to represent the best achievable compromise for on-axis and off-axis aberrations, field flatness and F-theta characteristics, obtainable using single-element spherical-surface designs of (standard) 48mm diameter and 3mm edge thickness. The lens material is ZnSe. 48mm lens diameter.
Product Description Various electrical appliances produced by company is proven the excellent quality, fine security and reliability through the years' technical proprties and development with the adoption of the advanced equipments and the first-class technological manufacture. We are a electrical motor factory with a long history for over 25 years, which has lots of experience of motor manufacturing. You can login in our website for more information. Ningbo Hujiang Electric Co., Ltd and Ningbo Hujiang Fan General Factory is an electrical motor and fan manufacture for over 25 years, which has lots of experience of motor manufacturing. In Oct., 1987, our products were awarded "Highly Quality Certificate" by the Central Government. Wish to cooperate with you in the near future! Product Specification / Models 71 series Other Information the platform is made from rubber
Name : Full color animation stage laser light Brand : HK Series : RG move head grating laser light Model Number : HK-PGI Scanning system : High speed scanner Scanning angel : big scanning angel Laser Power : R: 1500mw(635nm), G: 1200mw(532nm), B: 2000mw(447nm) Modes : Sound Active, Auto Mode, DMX512, Pangolin, ILDA, DMX Channels : 12 Channels Rating Power : 35W Power : AC100-240V, 50-60Hz, Security key switch/Emergency power switch Size : Product size: 580*330*180(mm) Weight : 12.5 kg.
Applications for 1kw -6kwsolar home lighting system: 1) vehicles and vessels series: military, police, ambulance, trucks, vans and cars carrying equipment and systems operated on ac / dc power. 2.) industrial equipment series: solar power, wind power generation, gas discharge lamp etc. 3.) office: computer, printer, duplicating machine, scanner, digital camera etc. 4.) home electric appliance: electric fan, vacuum cleaner, air conditioner, lights etc. 5.) kitchen appliance: microwave oven, electromagnetic oven, refrigerator etc. 6.) power tool series: electric saw, drilling machine, punching machines, air compressor etc. 7.) incandescent lighting, tv, medium fridges, medium freezers, fans, small-medium pumps etc. 8.) kettles, pots, small heaters, microwaves Specifications: Inverter solar / dc Inverter type: intelligent Wave: pure sine Rated power: 1000w Continuous output: 800w Peak power: 1400-1500w Input voltage: 24vdc Output voltage: 220v ac Output frequency: 50hz Converter efficiency: 80%. 35*25.5*20cm
Applications for 1KW -6KWsolar home lighting system: 1) vehicles and vessels series: military, police, ambulance, trucks, vans and cars carrying equipment and systems operated on ac / dc power. 2.) industrial equipment series: solar power, wind power generation, gas discharge lamp etc. 3.) office: computer, printer, duplicating machine, scanner, digital camera etc. 4.) home electric appliance: electric fan, vacuum cleaner, air conditioner, lights etc. 5.) kitchen appliance: microwave oven, electromagnetic oven, refrigerator etc. 6.) power tool series: electric saw, drilling machine, punching machines, air compressor etc. 7.) incandescent lighting, TV, medium fridges, medium freezers, fans, small-medium pumps etc. 8.) kettles, pots, small heaters, microwaves Specifications: Inverter solar / dc Inverter type: intelligent Wave: pure sine Rated power: 1000w Continuous output: 800w Peak power: 1400-1500w Input voltage: 24vdc Output voltage: 220v ac Output frequency: 50hz Converter efficiency: 80% . 35*25.5*20cm
Standard injection machine dkm50 dakumar-m The dkm standard machine is defined as the universal plastic processing industry. It adopts imported high quality parts, have good stability, long life time, high performance, and can produce most of plastic products. Dakumar standard molding machine series from dkm50 to dkm1600, on oct of 2010, dkm 2000, dkm2600, dkm3600 this three new models of molding machines will face market, dakumar molding machines are famous in stable running, precision and fast controlling system. Dkm50 standard injection machine Dakumar standard injection molding machine dkm50 parameters a b Injection unit screw diameter mm 28 32 Screw l/d ratio (l/d) 20.9 18.3 Shot volume(theoretical) cm3 60 78 Injection weight g 55 70 Injection pressure mpa 193 148 Screw speed rpm 0-255 0-255 Clamping unit clamp tonnage kn 500 Toggle stroke mm 255 Space between tie-bars mm 280x260 Max.Mold height mm 320 Min.Mold height mm 120 Ejector stroke mm 65 Ejector tonnage kn 20 Ejector number n 1 Others max. Pump pressure mpa 16 Pump motor poweer kw 5.5 Heater power kw 4.2 Machine dimension(l*w*h) m 3.1x115x1.6 Machine weight t 15 Oil tank capacity l 150
How to program key by Hitag2 programmer: Hitag2 programmer is a universal key programmer, with additional option of key programming from dump. Just insert blank key or appropriate transponder you need to program, Hitag will be able to detect the transponder type and operate all steps automatically. Key generation from dump is available for the following cars: Support BMW (2002 -2009 years) CAS/CAS2/CAS3 DG512 / CAS3 + DP512 Support matching BMW (2002 -2009 years) CAS/CAS2/CAS3 DG256 / CAS3 + DP512 key and remote control; the world's unique tec Feature of Hitag-2 programmer: ALL types of Hitag2 transponders are fully supported! Widest range of supported cars, using Hitag2 protocol! Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality! Correct BMW key programming - RADIO REMOTE is working! Supported transponder types: PCF 7936 PCF 7941 PCF 7942/44 PCF 7943 PCF 7945 PCF 7946 PCF 7947 PCF 7952 Supported transponder modes: Password mode Crypto mode Supported protocols: Manchester Biphase BMW Scanner 2.0.1 workable BMW cars models: It is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis.For chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3') BMW scanner 2.0.1 Function: Connecting with all electronic control modules in the vehicle. For all electronic control units reading identification data, sw/hw versions, user information fields. For all electronic control units read and clear error (DTCs) memories - standard, shadow, history memory. Possibility to read/program memory of electronic control units (including CAS modules). Synchronization DME/DDE and CAS. Package including: 1pc x BMW HIT-2.0.1 CAS1 PRO 1pc x USB Cable 1pc x CD Driver . Weight: 0.2KG.
Product name: x-431 tool ( color, infinite ) Part no.: a107 Net weight: 15kg X431 tool is a vehicle diagnostic device with color screen display and bluetooth technology for garages especially designed by launch. It features in anti-oil stain, anti-dust and it's shakeproof. Cabinet type with delamination design and unattached box can enhance usage efficiency greatly. It can directly be charged through the bottom interface of tool cabinet this device materializes humanization and it will be a good assistant for garages. Description: The most powerful scan tool to make vehicle service easy Wide coverage--cover almost all the vehicle models in the world; Keep abreast with the latest models--accurate test, fast upgrade anywhere in the world; Best diagnostic scanner for benz and bmw--148 benz systems and coverage on 7 series bmw vehicles The best cost effectiveness--leadership from professionalism Best hardware--rewritable compact flash card, huge memory and mini printer Easy upgrade--easy, professional and effective upgrade via the internet Advanced technology--stable performance showing advantages over similar scanners Largest r&d team--150 engineers engaged in r&d The largest r&d team working in r&d centers in german, australia and japan Reliable technology--already providing original equipment for over 20 vehicle manufacturers in the world First to release can bus adaptors Market-leading can bus adaptors ân Product name: x-431 tool ( color, infinite ) Part no.: a107 Net weight: 15kg
Product description OBDBook is brought forward by LAUNCH. It is one of the latest portable series scanner for the car user to check his/her car's status OBDBook keeps and enhances functions of its previous generations-Creader. The screen is larger. Its book shape design is more accordable with Ergonomics for hand hold convenient. 5 keys make operation easy and rapid. Product character 1. Smart appearance, book shape design, hand hold convenience. 2. New large screen, both DTC and its definition are displayed for user. 3. 5 function keys make it easy to operate. 4. Update via the Internet, cover the latest cars. 5. Perfect after service system satisfies customers in whole product life Product parameter Working temperature range:-20f+70fª Input voltage range:9f+25V Input current: less than 200mA Display: double 160*160 Support OBDII&EOBD protocols: SAE J1850 VPWf=SAE J1850 PWMf=ISO 9141f=ISO 14230(KWP2000)f=ISO 15765 (CAN)
Techwin TW4950 Portable Spectrum Analyzer for signal and equipment test We will try our best to provide products similar to Keysight Portable Spectrum Analyzer like X-Series and BSA, Rohde & Schwarz Portable Spectrum Analyzer like FSW, FSWP and FSMR, Tektronix Portable Spectrum Analyzer like RSA 308B, RSA7100 and RSA 5000B, Anritsu Portable Spectrum Analyzer like MS2850A, MS2840A and MS2830A. You will probably see us at the following exhibitions: EUMV in Europe , IMS in USA, MWC in Spain, EMV in Germany and so on. Overview of Portable Spectrum Analyzers advantages and functions : Techwin TW4950 series spectrum analyzer has many advantages: wide frequency range, high peroformance index, high sweep speed, various functions, and easy operation. In terms of performance index, it has excellent displayed average noise level, low phase noise, and high sweep speed. In terms of measurement functions, it has measurement functions of spectrum analyzer, inteference analyzer, AM/FM/PM analyzer, power meter, channel scanner etc. as well as intelligent measurement functions of channel power, occupied bandwidth, adjacent-channel power ratio, tune&listen, emission mask, and carrier-to-noise ratio etc. Techwin TW4950 apots the integrated design of 8.4 inch LCD and capative touch screen, which improves the display definition and operation convinience. It is handheld, compact and light, with flexible power supply, which is very suitable for field work. Portable Spectrum Analyzers Main Characteristics : Wide frequency range: from 9kHz to 44GHz, 4 models Low displayed average noise level: -163dBm@1Hz RBW(typical) Excellent phase noise performance: -106dBc/Hz@100kHz frequency offset@1GHz carrier High sweep speed: for 1GHz span, shortest sweep time
Panel : Panel size: 65inch touch screen kiosk Max. Resolution: 1920*1080 hd Display color: 16.7m Pixel pitch: 0.7*0.7 Brightness : 650cd/m2 Contrast ratio: 5000:1 Aspect ratio: 16:9 Viewing angle: 178¡ã/178¡ã Responsive time: 8ms Physical : Casing material: Tempered glass & aluminium Luminousness: 97% -99% Precision:
Portable Spectrum Analyzer for signal and equipment test We will try our best to provide products similar to Keysight Portable Spectrum Analyzer, Rohde & Schwarz Portable Spectrum Analyzer, Tektronix Portable Spectrum Analyzer,  Anritsu Portable Spectrum Analyzer. Overview of Portable Spectrum Analyzers advantages and functions : Techwin TW4950 series spectrum analyzer has many advantages: wide frequency range, high peroformance index, high sweep speed, various functions, and easy operation. In terms of performance index, it has excellent displayed average noise level, low phase noise, and high sweep speed. In terms of measurement functions, it has measurement functions of spectrum analyzer, inteference analyzer, AM/FM/PM analyzer, power meter, channel scanner etc. as well as intelligent measurement functions of channel power, occupied bandwidth, adjacent-channel power ratio, tune&listen, emission mask, and carrier-to-noise ratio etc. Techwin TW4950 apots the integrated design of 8.4 inch LCD and capative touch screen, which improves the display definition and operation convinience. It is handheld, compact and light, with flexible power supply, which is very suitable for field work. Techwin TW4950 can be used for signal and equipment test in the fields of aerospace, microwave & stallite communication, radio communication, radar monitoring, electronic countermeasures & reconnaissance, and precision guidance. Portable Spectrum Analyzers Main Characteristics : Wide frequency range: from 9kHz to 44GHz, 4 models Low displayed average noise level: -163dBm@1Hz RBW(typical) Excellent phase noise performance: -106dBc/Hz@100kHz frequency offset@1GHz carrier sweep speed: for 1GHz span, shortest sweep time
The VW321A series wireless module provides the capability of a short range, reliable wireless point-to-point, point-to-multipoint and mesh network RF data communications link. They can be used in a variety of data communications applications that require a simple to use invisible data link. The wireless modules are designed to operate in the unlicensed ISM frequency band (315MHz/433MHz/868MHz/915MHz ISM band) and are therefore acceptable for use in many countries. Features: -4 Operation modes: Transparent mode, Transparent secured mode, Addressed mode and Addressed secured mode. -Repeater supported -Integrated wireless link protocols -Deep sleep mode (Power down mode) /Wakeup Control -Server-Client mode -Broadcast Multi-drop mode -Easy configuration by AT commands. -Easy configuration with a user friendly control panel on PC. Major parameters Frequency band: 315/433/868/915MHz Interface : RS232/RS485/USB Modulation : 2-FSK Max. Tx. Power: 1W (+30dB) Supply Voltage : 5V RF data rate : 1200BPS ~ 128kbps Channel numbers: Multi- channel Linkage range : 2km linkage range at 9600BPS, L. O. S Operate temperature: -30 ~ 80 Size : 80mmx 50mm x 20mm(with casing) Interface footprint: Terminal Block/USB Antenna impedance: 50Ω Major applications Wireless 232 or 485/422 data link Water, electricity, gas and other automatic meter reading (AMR)system; Building automation system; Security entry system; Intelligent traffic; Vehicle Control; Wireless scanner; Restaurant Order System Management; Industrial control, remote sensing, automatic data collection system; Wireless data transmission; Digital audio, digital image transmission; Wireless electronic display screen; Telemetric systems Oil Well Measuring, Environmental Protection Monitoring Hydrology Water Level Monitoring Robot Controls Wireless conference system; Wireless microphone solutions etc. Size : 80mmx 50mm x 20mm(with casing)
Function and Character (1) The door is steady, robust and long service life .easy to be conveyed, mounted and dismounting. (2) Easy Assembly,The modular design allows for a quick and very simple assembly. Only 8 screws are required for. (3) Overhead Control Unit: LED Display, alarm lights, LED bar graphs and control touch pads plus all wiring, connections and electronics are integrated into the overhead compartment. (4) Accurate location: 6 independent distributing search coverage and acousto-optic alarm when target is found. Panel indicator light directly displays the alarming area which can exactly indicate the target. (5) Entry Pacing Lights: Smooth, efficient traffic flow with easy-to-view, eye-level pacing lights on the entrance side of each panel. (6) High adjustable sensitivity: JH series digital scanner gate is adjustable. In the highest volume, articles as small as a paper clip can be detected and indicated. (7) Complex circuit, infrared installation and computer automatic identification decrease the mistakes and missing dramatically. It can automatically show the alarm frequency and numbers of passed people. (8) Adjustable Flexibility: We can reach the security requirements by adjusting the flexibility. There are 100 flexibility degrees in each detective area. (9) Password protection setting: You can change the system, flexibility and other setting only after typing in the pass word correctly and only authorized person allowed to change the setting can't change the settings. (10) Adoption of weak magnetic field launching technology will not cause harm to heart pacemaker wearer, pregnant women, disks and videos. (11) Two or more gates can work simultaneously (12) Warranty:Limited 12 months, parts and labor. 75.3*49.3*25.5cm G.W:22KG 231*59.5*16.5cm G.W:66 KG
Barcode scanner Model no: cm-2900 series Cpu:32 bit high performance cmos Memory program : 2mb flash memory ; data : 2mb sram Readable barcode: code 39 / int 25 /industrial 2 of 5 / matrix 2 of 5 / codabar (nw7) / code 93 / code 128 / ean128/ jan/ean/upc / rss 14 / rss limited Display:128x128 dot fstn with backlight ( default : off) | fonts :1. Galf. English : 6x8 / 8x8 / 8x16 / 16x16 / 128x128 ; 2.Chinese& japanese : 16 x 16 Scanning light source : laser | scan distance : 0-65cm /15mil | resolution : 0.125 mm (5mil) | scan rate : 100 scan/sec | indicator :buzzer ; led!@green/red/blue ; vibrator Keypad number of keys : 26 keys include 4 function keys Interface: cradle iv terminal : high speed ir i/f 115.2kbps| pc- cradle : rs232c i/f or usb Power operation : lithium battery 3.7v / 1800mah /back up power : 3.0v | operation time : 120 hours ( per 5 second scan one time/ no backlight and other application ) / recharge time : 3 hours Optional:56k modem Auxiliary functions: clock / beeper /vibrator / low battery indication Size:59 w x 185 l x 30 h mm Operating temp: 0 - 50ºc Storage temp: -10c - 60c Dust and splash resistance: ip54 Emc:fcc class a & ce Drop test: 1.2m ( 30 times on a concrete floor ) Weight:150g, not include battery. Accessories:cradle / usb or rs232 cable / battery / poweradapter / handy strap / cd Developtool: basic / c or application generator
T2 2.4G LED touch controller Brief introduction T2 is the 2.4GHZ RF wireless synchronization color temperature controller which adopts LTECH multiple global initiate technology, the control system consists of two parts, the RF remote control and the receiver, realize the signal synchronization on unlimited receivers within effective distance, a very good solution for the LED project needs sync control wirelessly. Can RF remote the functions of color temperature dimming, quick color temperature/brightness selection, DIY and delay off so on. User-friendly color wheel for color temperature adjustment, unique LED state light for sync change indicated, user can simply know the LED working state from distance by checking the remote. Performance Features 1. Adopt 2.4GHZ RF wireless transmission technology, which is applicable for license and patent free worldwide. 2. Built-in with dual core driver, make it 10 times of processing speed. can process the wireless data transmission in complicated and multiple levels. 3. Advanced RF wireless sync control technology, no sync signal wire between receivers, sync capability is stable and reliable. 4. Remote controller adopts the capacitive touch control technology on the wheel, make the dimming more intellectualized and humanized. 5. The remote control built-in sync-status indicator, which can show the bright status of the LED synchronously. 6. Color changing scene mode and preset storage function. 7. USB charging port. Product parameter T2 Remote Control Input voltage DC5V built-in Lithium battery Working current ¡¨¹30mA Working frequency 2.4GHZ transmitting distance 30m Remote option sync control unlimited receivers Battery capacity 1000mAh Standby time ¡¨¹6 months Dimension L145¡¨¢W55¡¨¢H22mm Package Size L168¡¨¢W102¡¨¢H28mm Weight (G.W) 200gNote:The remote controler (T1/T2/T3) that shipped after Jan 15,2013 can be workable with WIFI-102 controller T2-5A CV Receiving controller Input voltage DC5V-DC24V Max current load 5A+5A Max 10A Max output powe 50W/120W/240W(5V/12V/24V) Compatible remote control T1/T2/T2M remote control Working temperature -30¡æ¡«55¡æ Dimension L175¡¨¢W44¡¨¢H30(mm) Package size L178¡¨¢W48¡¨¢H33mm Weight (G.W.) 110gNote:The receiving controller that shipped after Oct 1st,2012 can be workable with T2M. T3-CC Receiving controller (current 3 in 1) Input voltage DC12V-DC48V Output voltage DC3V-DC46V Output current CC 350/700/1050mA ¡¨¢3CH Driving LEDs 1-13 LEDs in series connection( 1W/3W/5W) Compatible remote control T1/T2/T2M/T3/T3M/T3X remote control Working temperature -30¡æ¡«55¡æ Dimension L175¡¨¢W44¡¨¢H30(mm) Package size L178¡¨¢W48¡¨¢H33mm Weight (G.W.) 110g T3-CV Receiving controller Input voltage DC5V-DC24V Max current load 5A¡¨¢3CH Max 15A Max output power 75W/180W/360W(5V/12V/24V) Compatible remote control T1/T2/T2M/T3/T3M/T3X remote control Working temperature -30¡æ¡«55¡æ Dimension L175¡¨¢W44¡¨¢H30(mm) Package size L178¡¨¢W48¡¨¢H33mm Weight (G.W.) 110g standard packing
T2M 2.4G LED touch controller Brief introduction T2M is the 2.4GHZ RF wireless synchronization/zone color temperature controller which adopts LTECH multiple global initiate technology. The control system consists of two parts, the RF remote control and receiver, realize the signal synchronization on multiple receivers, zone controlled arbitrarily (not more than 8 zones) within effective distance, a very good solution for the LED project needs sync/zone control wirelessly. Can RF remote the functions of color temperature touch adjustment, brightness adjustment, and DIY scene modes. User-friendly color wheel for color temperature adjustment, unique LED state light for sync change indicated, user can simply know the LED working state from distance by checking the remote. Performance Features 1. Adopt 2.4GHZ RF wireless transmission technology, which is applicable for license and patent free worldwide. 2. Built-in with dual core driver, quicken the processing speed 10 times, can process complicated and multilevel wireless data transmission. 3. Advanced RF wireless sync/zone control technology, wireless between receivers with stable and reliable sync capability 4. Remote control wheel adopts the capacitive touch control technology, which makes color temperature dimming more intellectualized and humanized. 5. Built-in sync-status indicator on the remote control , synchronously shows the CT/bright status of the LED. 6. Lighting DIY and preset storage function. 7. USB charging port. Product parameter T2M Remote Control Input voltage DC5V (built-in Lithium battery) Working current ¡¨¹30mA Working frequency 2.4GHZ transmitting distance 30m Remote option sync/zone control Battery capacity 1000mAh Standby time ¡¨¹6 months Dimension L145¡¨¢W55¡¨¢H22mm Package Size L168¡¨¢W102¡¨¢H28mm Weight (G.W) 200g T2-5A CV Receiving controller Input voltage DC5V-DC24V Max current load 5A+5A Max 10A Max output powe 50W/120W/240W(5V/12V/24V) Compatible remote control T1/T2/T2M remote control Working temperature -30¡æ¡«55¡æ Dimension L175¡¨¢W44¡¨¢H30(mm) Package size L178¡¨¢W48¡¨¢H33mm Weight (G.W.) 110gNote:The receiving controller that shipped after Oct 1st, 2012 can be workable with T2M. T3-CC Receiving controller (current 3 in 1) Input voltage DC12V-DC48V Output voltage DC3V-DC46V Output current CC 350/700/1050mA ¡¨¢3CH Driving LEDs 1-13 LEDs in series connection( 1W/3W/5W) Compatible remote control T1/T2/T2M/T3/T3M/T3X remote control Working temperature -30¡æ¡«55¡æ Dimension L175¡¨¢W44¡¨¢H30(mm) Package size L178¡¨¢W48¡¨¢H33mm Weight (G.W.) 110g T3-CV Receiving controller Input voltage DC5V-DC24V Max current load 5A¡¨¢3CH Max 15A Max output power 75W/180W/360W(5V/12V/24V) Compatible remote control T1/T2/T2M/T3/T3M/T3X remote control Working temperature -30¡æ¡«55¡æ Dimension L175¡¨¢W44¡¨¢H30(mm) Package size L178¡¨¢W48¡¨¢H33mm Weight (G.W.) 110g Standard Packing
