Horse Tail Hair For Brush Material Suppliers and Manufacturers

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Root vegetable /shellfish cleaning peeling machine : Root vegetable/shellfish cleaning peeling machine adopts the principle of low speed brush cleaning and high speed peeling with sand roller.This machine has the characteristics of small energy consumption,small volume ,light weight,beautiful appearance and convenient operation.The box is made of high quality stainless steel material,no corrosion,clean and hygienic ,the roller is not easy to deform,the brush is made of nylon rope rolling ,durable . Capacity 300-800kg/hour ,power 1.5-2.2kw .

Root vegetable cleaning peeling machine : Root vegetable/shellfish cleaning peeling machine adopts the principle of low speed brush cleaning and high speed peeling with sand roller.This machine has the characteristics of small energy consumption,small volume ,light weight,beautiful appearance and convenient operation.The box is made of high quality stainless steel material,no corrosion,clean and hygienic ,the roller is not easy to deform,the brush is made of nylon rope rolling ,durable . Capacity 300-800kg/hour ,power 1.5-2.2kw .

Our canned tunna fish process line machine high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating .ï¼?also for sardine fish canned production line ) Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .

Our canned salmon fish process line machine high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating . Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .

Canned sardine fish process line high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating . Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .

Our canned fish process line high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating . Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .

Canned Fruit Production Line, different capacity ,can customized. Process flowing :Raw materials cucumber cleaning brush cleaning lifting vibrating distributor Manual filling or Automatic machine filling (client choice) adding juice----Vacuum capping transportation sterilization drying labeling code spraying packaging warehousing (this process flowing only reference some machine are different).

Cucumber Canning Production Line, different capacity ,can customized. Process flowing :Raw materials cucumber cleaning brush cleaning lifting vibrating distributor Manual filling or Automatic machine filling (client choice) adding juice----Vacuum capping transportation sterilization drying labeling code spraying packaging warehousing (this process flowing only reference some machine are different).

Canned vegetable Production Line machine, different capacity ,can customized. Process flowing :Raw materials cucumber cleaning brush cleaning lifting vibrating distributor Manual filling or Automatic machine filling (client choice) adding juice----Vacuum capping transportation sterilization drying labeling code spraying packaging warehousing (this process flowing only reference some machine are different).

Size:100-200g/200-400g/400g+ Name: Horse Mackerel Variety: Yellow tail Weight (kg):0.2 Freezing Process: BQF Part: WHOLE Preservation Process: Water Size (cm):25cm Style: FROZEN Feature: NATURE, Nutritious Packaging: Bulk Shelf Life: 24 months Shape: Block Glazing:0-5% Net weight:95% Frozen way: Sea Frozen

Size:100-200g/200-400g/400g+ Name: Horse Mackerel Variety: Yellow tail Weight (kg):0.2 Freezing Process: BQF Part: WHOLE Preservation Process: Water Size (cm):25cm Style: FROZEN Feature: NATURE, Nutritious Packaging: Bulk Shelf Life: 24 months Shape: Block Glazing:0-5% Net weight:95% Frozen way: Sea Frozen

Brown 3-Piece Horse Hair Laced Southwest Inlay Belt