Application OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results. Technical indexes Test range� Film: 0.01-6500 cm3/m2·d (Standard) 0.07-6,5000 cm3/m2·d (Optional) -
1.Brief Introduction ST332B tester is multi-functional hand-held G.FAST test instrument with small size, specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 up to 35b, G.Fast) and maintenance It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on. The tester adopts LCD display and menu operation which can display the test results directly and improve the xDSL broadband service greatly. Itâ??s the best choice for the field operators of installation and maintenance. 2. Key Features Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2 up to 35b, G.Fast Support Annex A or Annex B, Annex L, Annex M Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance) Supports Modem emulation and simulating login to Internet Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test) Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX) Connects to CO via alligator clip or RJ11 Rechargeable Li-ion Battery Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL) Data memory fuction LCD display, Menu operation Auto shut off if no any operation on keyboard Compliant with all known DSLAMs Software management Simple, portable and money-saved
1.Brief Introduction ST332B VDSL tester is multi-functional hand-held VDSL2 test instrument with small size, specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc) and maintenance It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on. The tester adopts LCD display and menu operation which can display the test results directly and improve the xDSL broadband service greatly. Itâ??s the best choice for the field operators of installation and maintenance. 2. Key Features Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2 Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance) Supports Modem emulation and simulating login to Internet Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test) Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX) Connects to CO via alligator clip or RJ11 Rechargeable Li-ion Battery Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL) Data memory fuction LCD display, Menu operation Auto shut off if no any operation on keyboard Compliant with all known DSLAMs Software management Simple, portable and money-saved 3. Functions DSL Physical layer test Modem Emulation (Replace the user Modem completely) PPPoE Dialing (RFC1683,RFC2684,RFC2516ï¼? PPPoA Dialing (RFC2364) Telephone Function DMM Test Ping Function (WAN & LAN) Data upload to computer and software management Setup system parameter: backlight time, shut off automatically time without operation, press tone, Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and so on. Check dangerous voltage Four grades service judge(Excellent, Good, Ok, Poor)
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Application GTR-7001 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, laminated films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes. Features Vacuum differential pressure method Patent technology 3 specimens test simultaneously and independently Computer control One-button test, test automatically through whole process High accuracy vacuum sensors embedded in 3 Chambers with independent temperature sensor Test under various RH conditions with Humidity generator (optional) Environment temperature and humidity sensor inside Permeability coefficient ,solubility coefficient and diffusion coefficient test Chambers with water bath temperature control technology Unit based on embedded system,24bit AD Multiple test modes optional Data curves display Traceable reference film calibration Supports DSM system (DSM, lab data management system) Technical Indexes Test range: 0.01 - 190,000 cm3/m2�24h�0.1MPa (Standard) Resolution: 0.001cm3/m2�24h�0.1MPa Samples: 3, independent Vacuum accuracy: 0.1Pa Temperature range: 5C - 95C Temperature accuracy: ±0.1C Humidity range: 0%RH,35%RH-90%RH,100%RH (optional) Humidity accuracy: ±1%RH (optional) Sample thickness: less 5mm Sample size: >= 150mm * 94mm Test area: 48cm2 Test gas: O2, N2, CO2, He, etc Differential pressure: -0.1MPa - 0.1MPa Gas interface: Ф8mm Dimension: 730mm * 510mm * 350mm Power supply: AC 220V 50Hz Net wt. : 63kg Standards ASTM D1434, ISO 15105-1,ISO 2556,GB/T 1038-2000,JIS 7126-1,YBB 00082003 Configuration Delivery: Main unit, computer, G-TRANS software, Temperature controller, vacuum pump(BOC Edwards), tank regulator, PCIE card, communication cable, sample cutter, vacuum grease. Optional: Humidity generator, Reference film, vacuum grease, sample cutter, DSM system.
Application Wvtr-9001 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results. Features Electrolytic sensor method Patent technology Film and package test 3 specimens test simultaneously and independently One-button test, test automatically in whole process Multiple test modes optional Data curves display Computer control Digital flow adjustment 3 chambers with 3 temperature sensors Environment temperature and humidity sensor inside Chambers water bath technology Unit based on embedded system, 24bit î?-î£ ad Pressure, ppm water sensor and temperature overload protection Traceable reference film calibration Supports dsm system (dsm, lab data management system) Standard Iso 15106-3, gb/t 21529, din 53122-2, ybb 00092003 Configuration Delivery: main unit, computer, w-trans software, temperature controller, tank regulator, pcie card, communication cable, sample cutter, vacuum grease. Optional: package fixtures, reference film, vacuum grease, sample cutter, dsm system.
St332b tester is multi-functional hand-held adsl2+ test instrument with small size, specially designed for xdsl line test (xdsl include: adsl, adsl2, adsl2+ readsl etc) and maintenance it provides xdsl test, pppoe dial test, dmm test, modem emulation, line voltage indication and so on. The tester adopts lcd display and menu operation which can display the test results directly and improve the xdsl broadband service greatly. Itf+s the best choice for the field operators of installation and maintenance. Key features: 1) Test objects: adsl2+; adsl;adsl2;readsl 2) Multifunction: physical layer test; modem emulation ; pppoe dial ; dmm test; browse ip address information; determine telephone line faults (line break or mix) 3) Judge the quality of service 4) Data memory capacity: 50 records 5) LCD display 6) Menu operation 7) Simple, portable and money-saved. 8) Telephone functions, can detect incoming call, built-in earphone and microphone (optional). 160*76*28(mm).
St230f tel line tester is a portable and intelligent line fault tester, which adopts advanced technologies such as intelligent cpu, ic & smt technology. It integrates various kinds of functions such as telephone and line performance test to be the one. The incoming call number display function is compatible with fsk/dtmf two types. Its particular function of dc/ac voltage test can test whether there is dangerous dc/ac high voltage in the line or not quickly and accurately in order to protect lineman from high voltage. The tester is designed following the human engineering theory with the appearance style like barbell, it can be put on the shoulder, the lineman can do other work using hands at the same time; besides, it can be hung in the tool belt of waist through the pothook, it is convenient to realize the talk function cooperate with the high quality earphone when the lineman is climbing or doing other things; the max working duration when the inside rechargeable ni-mh battery is fully charged is 7 hours; the shell is made of the new type of material and it resists water and shock. Features: 1. Cid function, FSK/DTMF compatibility 2. Dtmf applying to GB/T15279-94 3. Dialing number display 4. Checking wire pairs function 5. Low voltage warning, automatic power off and energy-save design 6. Handsfree 7. Small size, simple operation. Quantity no limited /case pack Dimensions(mm): 232-73-95 Weight kg: 0.5.
Features: Widely applied in ground resistance measurement, loop resistance measurement With optional function of RS232 interface data upload No need to disconnect the ground wire from the ground net Without auxiliary electrode High accuracy and resolution With data memory Automatic power off Specifications: Clamp size: 65 x 32mm Resistance range: 0.01 to 1,200ohm; With automatic shifting Resistance resolution: 0.001ohm; Data memory: 99 sets Alarm setting: 1 to 199ohm; and buzzer alarm Quick boot: in 0.5 second With lower consumption.
* Wide voltage range battery discharger: 12V to 280V * 5.7 inch LCD touch screen for easy operation and showing various parameters real time * Selectable discharge mode: constant current/power / resistance * 4 adjustable stop points and multiple alarm designs to control the discharge process intelligently * Support RS232 real time monitoring by PC or USB download data after discharge * PC software for capacity evaluation and report generation * Optional wireless modules for 1.2V/2V/6V/12V cells voltage real-time measuring. Overview: Although battery resistance testing methods are improving and very popular, battery discharge test still is the most accurate and reliable method for actual capacity evaluation of battery groups. Because only constant current discharge can perfectly simulate the working status under loading for batteries, power supply departments in many companies and utilities keep the periodic discharge testing in their maintenance management. Because the DC power systems in various industrial utilities are using different voltage level battery groups (24V, 48V, 110V, 120V, 220V, 240V etc.), and most of professional users hope to find an unattended and automatic instrument to simplify discharge process, the battery discharge tester with intelligent designs and super voltage variability for almost all battery types would be preferable. Features: Wide Range 840CT can support 10-300V battery groups, the application of 840CT includes: Battery Nominal Voltage: Max Discharge Current 240 V / 220 V: 60 A 120 V / 110 V: 120 A 96 V: 120 A 48 V: 120 A 24 V: 120 A 12 V: 60 A Multiple Adjustable Stop Points 840CT offers 4 adjustable points for test stop points to avoid excessive discharge: Stop Point: Setting Range Group Low Voltage: 0-250.0 V Discharge Time: 0-99 Hour 99 Min Discharge Capacity: 0-9999 AH Cell Low Voltage: 0-15.00 V. 840CT also offer selectable quantity of cells which voltages below the stop point, this design could help you to locate more lag batteries in once constant discharging. Selectable Discharge Modes 840CT provides 3 discharge modes for different test requirement: Discharge Mode: Range Constant Current: 0-120 A Constant Power: 0-14 Kw Constant resistance: 0.16 5.7 inch Touch LCD Display Super big size touch LCD can display all real time data and graphs and support the click operations directly, humanized input method and menu designs simplified operating process. Presetting Function: The presetting function for discharge parameters provide 8 locations for setting up all discharge parameters in advance, this design can skip the setting procedures for the same discharging, simplified the operation and speed up the test. Internal Memory: * 840CT can save several independent discharge records automatically without Laptop monitoring, non-volatile internal memory guarantee the data security even in unexpected shutdown. * The menu interface provides some management operations like reviewing, deleting, downloading to PC by USB disk or RS232. Optional wireless cells voltage monitoring * Wireless modules for cells voltage measuring are available for 1.2V/2V/6V/12V batteries voltage monitoring during discharge test. * Each wireless module can monitor 4 batteries simultaneously. Comparing with the traditional cable voltage measuring method that each module only can monitor 1 battery, the new wiring operation is much easier. * With proper number wireless modules, main tester can real time scan and display the voltage data of each battery during the discharging, and display the histogram of all batteries to follow the battery voltage tracks in whole discharging process. * Intelligent judge program: 840CT can identify the situations that the battery voltages reach the threshold value or the signal missing by manual mistake. Avoiding manual interruption in the discharging, this revolutionary program makes the test stable and smooth. * 840CT also supports cable modules for special requirements. Multiple Protections & Alarms: Malfunctions: LCD prompt: beep warning Input over-voltage Reverse polarity Overload Overheat 840CT provides ample protective measures for various abnormal situations during discharge. Automatic termination, LCD prompt and beep warning would assist users to make proper treatments. Extendable & Compatible: Connecting with clamp current, 840CT cooperate other types in -CT series or any other load units, and clamp current can count external current in. PC ANALYSIS SOFTWARE: * Support data downloading and analyzing through real time communication or USB memory devices * The software interface includes: battery voltages curve and bar chart, battery resistances bar chart, group voltage curve, current curve, capacities histogram, data form and so on. * Powerful capacity estimating function, the software can predict the capacity of each battery in the tested group. * The software shows the data by various ways like bar charts, curve, and form. And users can magnify or minify any windows to read more details. * Automatically create EXCEL data report, it¡¯s so convenient to send or download the data. SPECIFICATIONS: Discharge Ranges Voltage range: current range 10-15V: 0-60A 15V-60V: 0-120A 86-150V: 0-120A 190-280V: 0-60A Current measurement: Internal current range: 0-120A Accuracy &resolution: 0.5%, 0.1 A External current range: 0-600A(optional current clamp) Accuracy &resolution: 1%, 0.1 A Voltage measurement Group voltage range: 0-300 V Accuracy &resolution: 0.5%, 0.1 V Cell voltage range: 0-15V Accuracy &resolution: 0.5%, 0.01 V Power Supply Power supply voltage: 220 V AC (-20% to +30%) Frequency: 50/60 Hz Power consumption:: 350W(max) Communication & Storage Communicate port: USB/RS232 Internal memory: 8Mbit Flash CE Certificate: LVD standards : 2006/95/EC:EN 61010-1:200 EMC standards: 2004/108/EC Annex II: EN 61000-6-1:2007 EN 61000-6-3:2007 EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008 Environment: Operation temperature: -5 to 50o C Storage temperature: -40 to 70o C Humidity: 5% - 95% RH Altitude: below 4000 m Working noise:
1.Available for encoding, and for setup of the address for each DMX512 decoder module (SC-DMX-00xH/L) of own company; 2.Available for one-time setup of different addresses for the DMX512 control system consisted of by SC-DMX-00xH/L(DMX-512 decoder module) of own company; 3.Available for transmission single and multiple channel DMX512 signal; 4.Available for scene function, and for independent setup of DMX512 Start code and value of each channel; 5.Support transmission of DMX512 testing signal by 40Hz or 20Hz; 6.Available for receiving DMX512 signal and for separate display of 512 channels and their respective Start code. Technical specifications: Brand name SC-DMX-512 Communication protocol DMX512/1990 DMX512 I/O RJ45*2 Display 16*4 large screen LCD Power supply input DC 9V Rated power
ZY 6058 Tracking Index Tester A. Introduction: This device applies to lighting equipment , low voltage electric appliance, household appliances, electric appliances , electric tools ,electronic instruments, electrical instruments , information technology research and production and quality department, also suitable for insulation materials , engineering plastic . electrical connectors, auxiliary parts industry. B. Standards: IEC60112, GB/T 4207, UL746A . C. Main parameters: 1. Testing chamber size :60cm*95cm*90cm (DxHxW) . 0.5M³. 2. Testing voltage : continuously adjustable during 100-600V, digital display. 3. Electrode :2 piece of platinum electrodes, 2mm*40mm*5mm (DxHxW). 30 inclined plane . 4. Distance between electrodes : 4.0mm. 5. Droplet equipment : interval time of droplet is adjustable 6. Pressure on surface :1.0 7. Max electricity : 3A 8. Outsize :61cm(D)x120cm(W)x105cm(H).
1. According to the international standard design, each channel of the system has an independent constant-current source and constant-voltage source. 2. The internal electrical power supply uses the high efficiency switching power supply, the energy conservation effect is remarkable, each power tube has the independent protection circuit, guarantees the equipment works with safety and reliability. 3. Measure adopts four wire method, decrease contact error, increase measure precision. 4. Each channel is independent with high efficient cooling system, equipment can work 24 hours with full load. 5. Hardware adopts double loop control, can change from constant current to constant voltage without pinnacle, protect battery. 3u, 482.6*378*130(mm) 15kg.
According to the international standard design, each channel of the system has an independent constant-current source and constant-voltage source The internal electrical power supply uses the high efficiency switching power supply, the energy conservation effect isremarkable, each power tube has the independent protection circuit, guarantees the Equipment works with safety and reliability. Measure adopts four wire method, decrease contact error, increase measure precision. 1450 * 380 * 1780(mm) 350KGS.
Product Features; Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G) Direct display of hardness scales HRB,HRC,HV,HB,HS,HL; Software to connect with PC and Dataview for PC operation; Automatic identification Impact Devices and test direction (Except G); Software data and upperlower limits setting and sound alarm; Time and date setting; auto-clock; On-Board memory holds 240-1000 groups of data; Integral thermal printer, print all test results and histogram; For all metallic materials; Li Battery , low voltage indication and sound alarm; LCD with blue back-light, showing all functions and parameters; Wide measuring range; Long standby time and stable performance of field work; Technical specifications: Hardness Scale:HL,HRC,HRB,HV,HB,HS Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value Standard Impact Device:D limits set measuring range:(170~960)HLDD Optional Impact Devices:C DC D+15 DL G Operating Temperaturee:0~40 Statistics Function:Average Max Min calculation,limits setting and alarm Testing direction:Automatic Min.thickness of hardened:0.8mm Chargeing time:3~5hours Power:Li Battery 4.2V/1600mAh Charger:5V/500mA Overall Dimensions:147*69*23mm Weight:186g Computer Interface:RS232 Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G) memory:240~1000 groups Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece Hardnesss:996HV (D DC D+15 DL C) 646HB (G) Continuous Working Time:About 200hours
1.1 General introduction APGK-307 is special instrument for power system GIS mechanical properties measuring. The instrument takes IPC for the core to sample and data process. It has 12.1 LCD to display and 12.1 touch pad for operation. Rich experience database makes the tester more intelligence. The tester has the characteristic of accurate test data, strong anti-jamming, easy operation, small size and light weight. 1.2 Functions 1. Measure opening and closing time, synchronism performance ,bounce time and bounce times of common and graphite GIS. 2. Measure distance, average speed and instantaneous speed of on and off of common and graphite GIS. 3 Finish test of continuous on and off of common and graphite GIS. 4. Measure coil current of common and graphite GIS. 5. Draw GIS state-time curve, current-time curve, distance-time curve and speed-distance curve. 6. Show 12 GIS port status of common and graphite GIS. 1.3 Technique index 1) Time measuring: Number of ports of GIS measured :í_12 Range of the setting time during the measuring course: >100 seconds Resolution: 0.01ms 2) Distance measuring: Distance sample rules:0-3 Range:
1.1 Introduction APVA-402 is a special instrument for testing characteristic of CT and PT .The tester can finish CT/PT transformation ratio test, CT/PT polarity test, volt-ampere feature curve drawing and CT error drawing. It has large output, high precision,stable performance and automatic testing. 1.2 Funtion 1 CT/PT transformation ratio test 2 CT /PT polarity test 3 CT /PT volt-ampere feature curve measurement 4 CT ratio error measurement 5 Error curve measurement 6 Result print 7 Unload data to PC 8 PC online test . Wooden case.
Clamp on ground resistance tester ETCR 2000C *Accurate ground resistance measurement from 0.01to 1000Ohms *current measurement including leakage current *Accurate readings regardless of power quality in 1 seconds *Simple and easy to use, no test leads or auxiliary electrodes necessary *Data logging capability - 50 records *Individual data point recording *User selectable audible alarms *Auto power off *Low battery indicator *Large LCD display Ground Resistance: 0.010 - 0.099 Ohms (¿¬+ 1% ¿¬+ 0.01 Ohms, resolution 0.001 Ohms) Ground Resistance: 0.10 - 0.99 Ohms (¿¬+ 1% ¿¬+ 0.01 Ohms, resolution 0.01 Ohms) Ground Resistance: 1.0~49.9 Ohms (¿¬+ 1.5% ¿¬+ 0.1 Ohms, resolution 0.1 Ohms) Ground Resistance: 50.0~99.5 Ohms (¿¬+ 2% ¿¬+ 0.5 Ohms, resolution 0.5 Ohms) Ground Resistance: 100~199 Ohms (¿¬+ 3% ¿¬+ 1 Ohms, resolution 1 Ohms) Ground Resistance: 200~395 Ohms (¿¬+ 6% ¿¬+ 5 Ohms, resolution 5 Ohms) Ground Resistance: 400~590 Ohms (¿¬+ 10% ¿¬+ 10 Ohms, resolution 10 Ohms) Ground Resistance: 600~1000 Ohms (¿¬+ 20% ¿¬+ 20 Ohms, resolution 20 Ohms) Ground Leakage Current: 0.00~299 mA (¿¬+ 5% ¿¬+2 mA) resolution 1 MA Ground Leakage Current: 100~299 mA (¿¬+ 5% ¿¬+5 mA) resolution 1 mA Ground Leakage Current: 0.30~2.99 A (¿¬+ 5% ¿¬+0.03 mA) resolution 10 mA Ground Leakage Current: 0.30~2.99 A (¿¬+ 5% ¿¬+0.03 mA) resolution 10 mA Ground Leakage Current: 10.00~20.00 A (¿¬+ 5% ¿¬+0.5 mA) resolution 10 mA.
Earth Resistance Tester: Model: ETCR2100+(basal) Category: Ground Resistance tester Earth Resistance Tester (ETCR2100+)-Illustration: ETCR 2100+ of Pincers Earth Tester, in the measurement of a grounding system with loop current, does not require breaking down the grounding wire, and need no auxiliary electrode. It is safe, fast and simple in use. 1.Wider range: 0.01Ñ+-1200Ñ+ 2.Stored data: 99 groups. 3.Resistance Resolution: 0.01Ñ+ 4.Size of Jaw: ¬¬32ú¿mmú¬ 5. Sound and light alarm, "beep - beep - beep -" alarm sound. 6. Breakthrough in self-test the boot a long time to wait, start immediately into the test. 7. Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology, a fully intelligent. 8. Break the old product to heavy issues, more in line with characteristics of handheld devices. 9. The new design, panel 6 button operation, the performance through. 10. Lower power consumption: Maximum operating current not exceeding 50mA. 260*90*66(MM)
It is applicable in many properties test of plastic films, complex films, flexible packaging materials, adhesives, adhesive tapes, glue, rubber, paper, and plastic aluminum board. The test items include tensile, peel, ripping, hot-seal, shear, etc. Technical parameters: Drk101d: specification: 0.01; 0.05; 0.1; 0.2; 1;5 (kn) (computer controlled) Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 900mm Power: 0.5kw Plywood carton
