5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2 - The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4 - Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
Nickel.Mining broker
30-50 loads of small/Medium Al cores available price $960 cnf Mundra 3-5 loads of Large Al cores available price $1080 cnf Mundra
8011 aluminum coil adds Fe-Si elements on the basis of 1 series pure aluminum. If the total alloy elements exceed 1%, its alloy properties will have higher advantages. It is commonly used to make aluminum foil below 0.2 and aluminum coils of 0.2-0.5. Its performance is better than that of pure aluminum foil, and it is widely used in aluminum foil and aluminum coil thin materials. Status: O, H12, H14, H16, H18, H22, H24, H26 Supply method: aluminum coil, lamination, strips Surface treatment: smooth aluminum, mirror surface, patterned aluminum coil Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional)
1050 pure aluminum coil has low density, good electrical and thermal conductivity, good corrosion resistance, and good plastic processing performance. It cannot be strengthened by heat treatment. The strength can be improved through cold deformation. The only form of heat treatment is annealing. 1060 aluminum coil is industrial pure aluminum with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity. It has good elongation and tensile strength, but its strength is low and heat treatment cannot enhance the machinability. 1100 aluminum coil belongs to the aluminum series, its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance; the corrosion resistance can be further improved after anodizing, but it cannot be strengthened by heat treatment. Status: O, H12, H14, H16, H18, H22, H24, H26 Supply method: aluminum coil, lamination, strips Surface treatment: smooth aluminum, mirror surface, patterned aluminum coil
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 â?? iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
Nickel wire 0 025mm np2 99 9045%.
Ferronickel.
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties. Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc. The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments. Good deep-drawing and welding properties, easy to process into various shapes and sizes of products. Smooth surface, easy to perform surface treatment and painting. Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc. Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields. 3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity. Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability. Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities. The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil. For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil. Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
Nickel cathode.
Stainless steel is an iron alloy with a chromium content of at least 10.5%. Chromium forms a thin oxide layer on the surface of steel, known as the passivation layer. This can prevent further surface corrosion. Increasing the chromium content can improve corrosion resistance. Stainless steel also contains varying amounts of carbon, silicon, and manganese. Other elements such as nickel and molybdenum can be added to impart other useful properties, such as enhanced forming ability and increased corrosion resistance. Waste stainless steel refers to stainless steel waste generated from industrial manufacturing and stainless steel processes, as well as stainless steel equipment that has been damaged or scrapped due to long-term use, and stainless steel utensils used in daily life. Our factory produces approximately 20 tons of stainless steel per day, and we have abundant inventory of stainless steel waste with guaranteed quality. Scrap stainless steel is a high-grade alloy steel with a higher value than ordinary scrap steel.
We can supply on a monthly basis around 30-50 tons per month of Ceramic CPU scrap for gold discovery and scrap motherboards and lan cards. Our prices change according to your order. For bulk order or sample order, contact us for our quote. We have in stock CPU Scrap for immediate dispatch. The available CPU scrap details are as follows - -Scrap Ceramic CPU -Scrap Ceramic CPU with Aluminum Cap -Scrap Black Plastic CPU -Scrap Plastic CPU's -Ceramic Pentium pro -CPU 486 ceramic We welcome buyers from all over the world. Contact us with your requirement. Launched Launch Date Q3'13 Processor Number E5-1620V2 For Intel Smart Cache 10 MB For Intel QPI Speed 0 GT/s Instruction Set 64-bit Instruction Set Extensions AVX Lithography 22 nm Scalability 1S Only VID Voltage Range 0.651.30V of Cores 4 of Threads 8 Processor Base Frequency 3.7 GHz Max Turbo Frequency 3.9 GHz TDP 130 W Max Memory Size (dependent on memory type) 256 GB Memory Types DDR3 800/1066/1333/1600/1866 Max of Memory Channels 4 Max Memory Bandwidth 59.7 GB/s ECC Memory Supported Yes PCI Express Revision 3.0 PCI Express Configurations x4, x8, x16 Max of PCI Express Lanes 40 We also sell the following scrap: Computer Mother Boards Computer Finger Boards Computer Memory Computer Processors Computer Power Supplies Computer Hard Disks Computer Floppy Drives Computer CD Rom Computer Cases Computer Wires Computer Keypads Computer Mouse Computer UPS or Lead batteries from UPS Cell Phone Handsets Cell Phone PCB Boards Cell Phone Batteries Lithium Cell Phone Batteries Nickel Cell Phone LCDs Cell Phone Housings Cell P If interested, please do contact with us for more details,product photos,product availability ,shipment time.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
UBJECT UNSOLD: COLD ROLLED COILS,COLD ROLLED SHEETS,COLD ROLLED STRIPS, OVER-ROLLING,3RD CHOICE,2ND CHOICE,4TH CHOICE; QUANTITY: 3330 TON ORIGIN: Italy PRICE: your best bid TERMS OF PAYMENT: 30% ADVANCE + 70% AGAINST BL COPY DELIVERY TERMS: CFR - COST AND FREIGHT DOCUMENTS PROVIDED: EUR1 CERTIFICATE
Nickel wire.
Nickel wire.
Nickel Wire.
Nickel wire.
Nickel wire.
Nickel wire.