NO-A1 Nitric Oxide Sensor (NO Sensor) Description Alphasense Nitric Oxide gas sensors operate using proven fuel cell technology. NO-A1 Nitric Oxide Sensor size: 20mm diameter, the industry standard size for portable gas detectors The NO range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 200 parts per billion (ppb) whilst giving linear outputs to as high as 250ppm. The sensors are suitable for inclusion in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers. Alphasense NO sensors provide a significant improvement in stability of response to transient relative humidity changes. The NO sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. NO-A1 Nitric Oxide Sensor NO sensor Specifications * Range: 250 ppm NO limit of performance warranty * Sensitivity: 320 to 480 nA/ppm in 50ppm NO * Response time t90: < 45s from zero to 50ppm NO * Resolution: < 0.2 RMS noise (ppm equivalent) * Temperature range: -30 to 50'C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 % rh continuous * Weight: < 6 g
CL2-A1 Chlorine Sensor (CL2 Sensor) Description Alphasense Chlorine gas sensors operate using proven fuel cell technology. CL2-A1 Chlorine Sensor size: 20mm diameter, the industry standard size for portable gas detectors The Cl2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 20ppb and an operating range from +0 to 20ppm. The sensors are suitable for inclusion in fixed installation sensing heads and portable safety instruments. These sensors have improved transient response to humidity changes compared to competitors' equivalent sensors. The Cl2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. CL2-A1 Chlorine Sensor (CL2 Sensor) Specifications * Range: 20 ppm limit of performance warranty * Sensitivity: -350 to -750 nA/ppm in 10ppm Cl2 * Response time t90: < 60s from zero to 10ppm Cl2 * Resolution: < 0.02 RMS noise * Operating life: > 24 months * Temperature range: -20 to 50'C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 %rh continuous * Weight: < 6 g
This machine is designed for ultrafine powdery products and high accuracy packaging requirements. The weight sensor installed in the container completes the two-speed filling, metering and lifting work. Its suitable for a wide number of applications including food additives, toner, fire extinguisher dry powder and other ultrafine powdery products. 1. The container tray below equipped with weight sensor, it has fast and slow filling system to ensure the high accuracy. 2. Servo motor drives the tray movements, lifting speed can be arbitrary set. During filling process, basically there is no dust pollution to the environments. 3. Servo motor and servo drive control the auger to ensure the stable performance and high accuracy. 4.Pl controller, friendly touch screen easy to operate. 5. Stainless steel structure, modular container, easy to cleaning. 6. Filling head with a hand wheel to adjust the height according to different size of bags. 7. Fix auger mounting structure ensures that material wont be affected. 8.Working processmanual bag/can loading container liftingfast filling and container descending achieve predicted value slow filling achieve target value manual bag/can unloading 9. Pneumatic bag-clamping device or supporting device is optional according to different requirements.
Technical specifications 17r 350w moving head beam spot wash Technical specifications Voltage: 100-240v/50-60hz Dmx channel:16/24chs Control model:dmx512, auto model Led lcd display+press button, english/chinese Display board intelligent flip function. Light source:osram 350w 17r lamp 3in1 spot wash beam Super fast and ultra silence 3-phase step motors Color temperature is 8000k, life span is 2000hs. 13 color with white, dual color effect. 14 fixed gobo with open circle 9 changeable rotating three-dimensional gobo with white. Any two-kinds prism stack can combine dynamic effect Positive and negative rotation switching effect. Optical lens: high precision glued optical lens combination Focus: linear focus Zoom: linear zoom. Dimmer: 0-100% linear dimmer. Beam angle: 2-38 degree. Strobe: two-pieces plate strobe(0.5-9fps) 16pcs super silence motors, pan&tilt 3-phase step motors, 16bit. Housing: high temperature resistant alloy plastic Ip rate: ip20 Packing size: 480ã?480ã?590mm(1pc/ctn) N.W:18.6kg G.W:20kg
Product description 1.Touch screen 2.Adjustable timer and adjustable temperature system 3. Temperature precision +-0.1c (real test data) 4.Temp range: 32-211f / 0-99c 5.Time range (timer): 0-99h 6.Water cycling system 7.Dry heating protection 8.Product size: 70*71mm, width including the fixing part 90mm, height 350mm 9.Certification: cb/rohs/etl/ce/fcc 10.App and wifi are available The sous vide wi-fi app makes it incredibly easy to cook with your precision cooker. Simply start your cook with your phone from anywhere are and your precision cooker wi-fi will do the rest. With push notifications from the sous vide wi-fi app, you can spend less time tied to the kitchen and more time doing what you love. Head to the gym, run trails, or enjoy time with your family. Dinner will be ready when you are. Cooking beef in hot water sous vide cooker new best selling products 2017 for kitchen
The light for professional stage, show, concert, event. Application for: stage performance, tv show, studio, meeting rooms and gymnasium etc. Model: dj disco moving head light 200w spot beam wash animation Voltage: 200w~240v/50-60hz (100~120v/ 50-60hz selective ) Ballast: magnetic-ballast Lamp: yodn r5 ac 150/190w Color temperature: 8500k Average lifespan: 2000h Color: 14 color + blank color wheel Gobo: 17 fixed gobo + blank gobo Prism: rotation 8-face prism, bilateral rotation Lens: high precision optical lens Wash effect: adjustable wash effects angle Focus: linear adjustment Dimmer: 0-100% linear adjustment Pan/tilt: x axis 540 y axis 250automatically accurate positioning Beam angle: parallel beam angel 0 - 3.8 Strobe: double lens strobe (0.5-9 times/ second) Control mode: standard dmx512, automatic and master/ slave mode Channels: 16 chs Controller can open the lamp and reset, including delaying function Weight: 18.5kg
Kashmiri saffron is valued all over the world for its fine quality and a large part of the saffron produced in Kashmir is exported to various countries. The ideal environment for cultivation of saffron is cool dry climate and rich soil with excellent drainage and organic content, and Kashmiri land is famous for all these rich qualities. There are three grades of saffron available in Indian market and they are known as Saffron Lachha, saffron Mongra and saffron Zarda. Saffron is not grown on any of the other fertile alluvial plateaus of Kashmir. The stigmas of saffron cultivated in Kashmir are extremely long and with a thicker head. They are also of a deep red color. The size of the stigmas indicates the inherent suitability of the soil and climate for this product. The saffron that we supply to all consumers and traders is Kashmiri saffron which is the world�s best saffron known for its exotic aroma and flavor in culinary preparations around the globe. Kashmiri saffron has an extremely dark maroonish-purple hue, which suggests the saffron�s mind blowing flavor, aroma and coloring power The rate is fixed for 10kgs - FOB USD92600 (exchange rate at 64.81 - USD to INR) dated 30th March 2017. The rates might vary slightly due to demand and supply, seasonal fluctuation and exchange difference.
-production ventil plug with six connections provides ease to assembly and heat saving. -Optional Ventil plugs production with 8 perforated connection. -Advanced user control and energy saving for comfortable warming with use of thermostatic valve. -Sub connection possibility that hides installation pipes from wall and floor -Possibility to provide thermostatic ventil and thermostatic head. -Possibility to produce Ventil plugs as gear -For stock and usage flexibility, assembly by J type fixing brackets (Alternative bracket types for wall-mounting and floor mounting assembly are optional) - The model's Ventil plugs are on bottom-mid, its distance of all height, type and length are constant and it gives advantage for placement. -Central connection model provides cross-link functionality to increase efficiency of radiator. Central connection model allows to change with different measures without removing installation. -Termo VKR ventil plugs are produced as standard and located at right bottom of panels. -TERMO VKL ventil plugs are produced as standard and located at left bottom of panels. -Termo VK ventil plugs are produced as standard and can be use as left and right as location. -Termo VK-M ventil plugs are connected as bottom and mid center.
Ionizing air gun model: sl-004d/ static elimination ionizing air gun Product description Ionizing air gun model: sl-004d Operating voltage 4.6kv(sl-007) Current consumption: 300µa Operating temperature -10°c ~ +45°c Hv cable length: 3meters Operating air consumption: 5m³/h (0.5 mpa) Operating air pressure: 0.3~0.8mpa Weight: 0.6kg Features: 1.Small aluminium alloy gun body. 2.Coaxial schielding cable is adopted, durable and safer. 3.Fixed gun head for extra firmness. 4.Ionizing air gun is a handheld device which provide a concentrated flow of high pressure ionized air to a target surface of object. 5.They are designed for large focused cleaning and neutralization. 6.It has an effective distance of 1, 000mm. 7.It operates with power supply which must be ordered seperately. Application: It is well used in delicate electronic products, electronic assembly line, medical device manufacture and assembly line.
The light for professional stage, show, concert, event. Application for:â stage performance, tv show, studio, meetingâ rooms and gymnasium etc. Product name: sharpy 330w 15r spot wash beam moving head Video liprodnk: http://www.Youtube.Com/watch?v=rqr1y70t37m Power supply: ac120v-240v 50/60hz Power consumption: 350w max Lamp: osram 330w, 1, 500hr, 8000k(optional yodn r17 350w) Out put lux: 10, 500lux at 20 meters Dmx channels: 3 dmx modes-21/23/34 channels dmx Control 3-pin & 5-pin dmx Cmy: cmy color mixing system Lense: anti-reflective coated lense Color: â 6 colors+open Fix gobo: 14 fixed gobos+open Rotation: gobo 8 rotation goboes+open Focus: motorized focus Zoom: 9â°to 27â°variable zoom beam angle Prism: 3 face prism and prism rotation and 16 prism macro Dimmer: mechanical dimmer 0-100% Strobe: variable speed shutter / strobe Iris: motorized iris Pan/tilt: 540â°for pan, 270â°for tilt Fixtures: remote controller lamp's switch function, display light and lamp's using time Structure: heat-proof plastic+module pressing alloy materials Ip: ip20 Weight: 23kgs Size: 409*419*541mm
200W Moving Head Beam Light OT-B200 Technical Parameters 1. Voltage: AC100-240V, 50/60Hz, electronic ballast 2. Power: 400W 3. Light Source: MSD200W, Philip bulb 4. Fuse: 7A 5. Color Temperature: 8000K 6. Average Life: 2000 hours 7. Color Wheel: 1 fixed color wheel, 14 changeable colors + white light, semi-color effect 8. Gobo Wheel: 1 fixed gobo wheel, 17 gobos + white light, high-speed jitter. 9. Effect Wheel: 1 rotatable 3 facet prism, effect move, atomization effect 10. Prism: rotatable 8 facet prism effect, bi-directional rotation, beam effects can zoom in or out (12 or 16 facet prism can be customized) 11. Beam Angle: 0-3.8 ° 12. Focus: electronic focus 13. Dimmer: 0-100% linear dimming 14. Strobe: 0-10 times / sec, adjustable speed 15. Channel: 16CH 16. LCD: On / Off 17. Optical Lens: 3 optical lens combined 18. Motor: 13 ultra-quiet motors, 2 three-phase motors, 16 bit driver 19. Scanning Range:Horizontal 540 °, Vertical 270 °, 8Bit/16Bit resolution 20. Protection: Communication design is compatible with the DMX512 protocol overheating protection standard. 21. IP Rate: IP20, overheating protection 22. Carton size: 460x420x550mm 23. Net Weight: 17.5kg Gross Weight: 19kg
To print images on the glass products of bottles,vodka bottles,beer bottles,wine bottles,perfume bottle,cosmetic packaging bottles etc with multicolor, we Hanhuang developed the Auto Glass Bottle Printing Equipment. The product photo as below, The Auto Glass Bottle Printing Equipment also can print photos for the flat surface of Wood, Stone, Metal, Plastic, Leather, Ceramic, Acrylic etc,if the surface not so flat, we will make a clamp as below showed to fix it, which can be applied with Bottle Printing too. Auto Glass Bottle Printing Equipment specification as below : Print head: Epson DX10/2PCS Printing method: 1,White;2,Multicolor;3,Varnish Printing software: Ultraprint and PhotoPrint Max printing size: 60cm*90cm Printing model: CMYKLCLM+6W/CMYKLCLM+4W+2V Printing height: 0-45CM Printing precision: 360dpi*720dpi*1440dpi Printing Speed: A3 image/180seconds Ink type: UV environmentally ink Ink consumption: 15ml/m2 Ink system: 50ml*6 colors Operation system: winxp/win7/win8/win10 Voltage: 110-220V 50-60HZ Printing interface: USB2.0 Solidification: LED UV Lamp Net/Gross weight: 260kg/450kg Outsize: 2020*1200*1030(mm) Packaging size: 2120*1350*1230(mm) Warranty: 3years(Not included Printing head)
Ring drilling machine usage and characteristics ï¼? 1. This cnc ring machine is mainly used on ring form materials' radial drilling. The self central chuck work table is put in horizontal position. The chuck is four claws inner-chuck. The chuck is of clamp positioning, workpiece circal cnc rotary indexing, drilling power head move from the workpiece axis to digital display side for positioning. Two axes cnc control. 2. Workpiece indexing driven by servo motor driven high precious gear, drilling machine for ring workpiece axis digital display positioning manually through ball screw and guide rail. 3. Ring drilling machine workpiece feed-in is driven by ball screw. During processing can automatic, precious, fast positioning, can finish drilling automatically. Highly improve the precious and speed of drilling, ensure the interchangbility of workpiece. Also avoid the possible of workpiece repair or invalidated due to manual positioning and residual of drilling. 4. The control of the machine is cnc 5. Circulating cooling system, reducing unproductive time, lower labor intensity. What the operator only need to do is to fix and pull down the workpiece and change drill. 6. Advanced numerical controlled drilling power head, no data need to be set, can process idle stroke fast feed-inã?�low speed workpiece feed-inã?�change of rapid return after drilling through. 7. Cnc custom drill machine for flange fast chuck equipment, which makes change of drill easyã?�convenient and fast. 8. Two axes cnc control, cncã?�plc control, crt display. 9. The custom drilling machine dimension of workpiece input into control system, once input can be used repeatedly. 10. Cnc controlled rotating worktable. 11. Clamping the part manually. 12. Cooling liquid automatic circulation. 13. Fast forwardã?�workpiece feed-in of stroke of the drill can be controlled automatically, fast return after drilling through. 14. The equipment are of high quality, with high reliability. -
Digital Printer for Package Bottle Printing Package Printer HH-UV-9060 Digital Printer for Package Bottle Printing Style#HH-UV-9060 This digital printer is designed for package bottle printing like below samples, it can print on the wine bottle, glass bottle, plastic bottle,cosmetic bottle etc. Company Introduction: Hanhuang (Guangzhou) Image Technology Co., Ltd was located in Huadu District, Guangzhou, Guangdong Province.We are focusing on developing and producing small Digital Printers for Package Bottle Printing, which is applied with some individualized images printing on some package bottle. For this digital bottle printer, the bottle diamter is limited to 45 centimetre, the full page can print around 20-30pcs bottles,it will take around 6-10 minutes. Compared to the traditional printing, this digital bottle printer works more clean and less defective good. Below photo is the clamp to fix the bottle when proceed with printing images. Please search for these key words:Package Printing,Bottle Printer,Package Printer, so we will talk more details. Style#HH-UV-9060 specification: Print head: Epson DX10/2PCS Printing method: 1,White;2,Multicolor Printing software: Ultraprint and PhotoPrint Max printing size: 60cm*90cm Printing model: CMYKLCLM+6W/CMYKLCLM+4W+2V Printing height: 0-45CM Printing precision: 360dpi*720dpi*1440dpi Printing Speed: A3 image/180seconds Ink type: UV environmentally ink Ink consumption: 15ml/m2 Ink system: 50ml*6 colors Operation system: winxp/win7/win8/win10 Voltage: 110-220V 50-60HZ Printing interface: USB2.0 Solidification: LED UV Lamp Net/Gross weight: 260kg/450kg Outsize: 2020*1200*1030(mm) Packaging size: 2120*1350*1230(mm) Warranty: 3years(Not included Printing head) Application for printing images on the glass bottles, ceramic bottles,acrylic signs etc. Digital Printer for Package Bottle Printing Photos as attached: Supply Ability:100pcs/month. After-sales Service Provided: 1,Engineers available to service machinery overseas. 2,Free spare parts,Online support,Field maintenance and repair service,Video technical support. Warranty: 3years (not included the print head) Payment: 30% deposit,full T/T before shipment. Production finish time:5-7days after confirm receiving the payment. Item name:Digital Printer for Package Bottle Printing Packaging: PE film and bubble wrapped with outside wooden box with export standard. Shipment: The Digital Printer for Package Bottle Printing will be shipped as required by sea cargo/air/truck/express/FEDEX/UPS/TNT/DHL etc.
1. Feature 1) The platform transmission uses the imported linear guide rail and lead screw in combination with theJapanoriginal Panasonic servo drive ensuring the high-speed stationarity and control precision of the platform. 2) The transmission of the X and Y shafts uses the imported high-precision ground lead screws and linear guide rails in combination with the Japan Panasonic servo drive ensuring the high precision and high speed of mounting. 3) 4 sets of high-speed mounting heads work simultaneously. The sucking heads use high-precision durable spline shafts. 4) Easy operational program, much more convenient, automatic vision makes position fixing more accurate and convenient. 5) Multi Feeder optional, can meet different kinds of LED mounting. 6) Powerful software adopts numbers and images to display the program coordinate, easy and more convenient. 7) Software adopts data system, and store different types of PCB for convenient adjustment, just need to programming one time for new products to use forever. 8) Platform: Y axis, X axis can be moved manually, speed adjustable, can achieve arbitrary point manual arrived, convenient programming. 9) LED Pick & Place Machine use imported vacuum detection system, it can check the suction accurately to prevent material leakage and throwing effectively. 10) Internal negative pressure system: low noise, long service life and vacuum pressure constant. 11) Standard setting:1 PC,6 mounting heads,18 nozzles. 12) Optinal :8mm,12mm,16mm 24mm automatic feeder, different nozzles, industrial pump, air compressor . 2. Machine local pictures 3. Technical parameter Model CWTP-6H Max circuit board size 1200 300mm Max moving range X axis 1210mm Y axis 330mm Max moving range of Z axis 10mm Typical Mounting speed 20000cph Max mount speed 28000cph Mount accuracy ±0.05mm Position method Visual position Component available 0603and above SMD component and LED Programme method Automatic data import/ video study/ keyboard input Belt feeder 8mm, 12mm, 16mm and 24mm(OPT) suction nozzle JKUI suction nozzle504, 505 and 506 Operation system WINDOWS XP Compressed air Vacuum air in machine Power supply 220V,50Hz, 1.2Kw Weight 750Kg Dimension 2000MM(L)*930MM(W)*1450MM(H)
High efficiency CNC double-head Wire Rebar bending machine. The CNC Double-heard rebar bender center adopts digital control. Its features simple operation, convenient maintenance and high efficiency. It can realize automatic length measurement, automatic bending clamp, rapid prototyping and other functions. The control program of imported PLC and CNC stores hundreds of figures and is equipped with database. It applies advanced designing concept and adopts imported servo motor driving and controlling. Therefore, it realizes two-way digital control bending and accomplishes more than 20 angles figures. The producing efficiency is high. This equipment especially applies to highway bridge construction site and rebar concentrated processing factory, etc. 1.Controlled by top-class brand servo motor. The head features rapid moving response and high accuracy of positioning. 2. With world top-class brand CNC control system, we realize automatic production and ensure practicality and long service life of equipment. 3. The bending head has compact structure. The bending moulds of different models are equipped. The bent rebar is of intensive range. 4.The bending platform adopts high-strength guide rail which will not be out of shape easily and is durable in use. 5. With humanized storing racks, the production is easy, and efficiency can be improved. 6. It can process many rebars at one time to increases efficiency. 7. It adopts unitary lifting and there is no need to dismantling when removal. It applies to fixed site manufacturing or frequently changing site for its simple installation. 8. High intensity and automatic storage rack on vertical rebar bending center. Technical Data Model FHB2-32A Overall size 12000*2155*1690(L*W*H) Working Voltage 380V Installed Power 15.5KW(working power 5KW),50-60Hz Bender moving speed 0.1-0.5m/s Bending Speed 30°-48°/S(5-8r/min) Overall Weight 4.5tons Min Length scope of the stirrup side 70mm Max bending angle "Upward bending 0-200° Downward bending 0-120°" Bi-directional bending (up or down bend) Φ10mm-Φ28mm Unidirectional bending (upward bending) Φ28mm-Φ32mm Min. Space between stirrup side ¢10 560mm ¢32 620mm Max bending length 10.5m Feeding speed of storage convey table 0.6m/s Load capacity of storage convey table 3T Working Temperature -10â??â??+50â??
Sharpy 120W 2R Moving Head Spot Beam Light Features: Amazing dot matrix ,four tact switch, 180° turning show one color wheel, 14 colors and open Gobo: 17 gobos Rotate 8 Facet Rotating Prism, frost 0-100% mechanical dimming, mechanical dimming and free dimming available. strobe macro control available. Lens optical system mechanical focus .beam angle 0~4° Over heat protection Application for: stage performance,TV show,studio,meeting rooms and gymnasium etc. Product Name Sharpy 120W 2R Moving Head Spot Beam Light Power supply AC120v-240V 50/60hz Power Consumption 120W MAX Lamp Philips MSD Platinum 2R Control Mode DMX,Auto,Sound,Mast/Slave DMX Channels 16 Channels DMX Color 14 colors+open Gobo 17 fixed gobos+open Dimmer Mechanical Dimmer 0-100% Strobe Variable speed Shutter / Strobe Pan/Tilt 540°for pan,270°for Tilt Fixtures Remote controller lamp's switch function,display light and lamp's using time Structure heat-proof plastic+module pressing alloy materials IP IP20 Net Weight 18kgs Dimension 405x345x475mm Carton Packing Size 460x430x560mm FAQ: 1.Q: What's the Payment method A: We can accept T/T, Western Union, Aliexpress Escrow or visit factory in Cash as payment method, 30% deposit before production, the balance before delivery 2. Q: How to get the price list A: Pls email or call to us with items names which you like together with your details(name,details address,telephone,etc), we will send to you asap. 3.Q: How does your factory do regarding quality control A: Quality is priority. GAGA Light people always Pay more to quality controlling from the very beginning to the very end. Also, we provide 2 years warranty for all our products. Guangzhou GAGA Pro Lighting Equipment Co., Limited is a professional manufactory of LED stage light, stage lighting. We produce stage lighting, LED dance floor, LED par, moving head, effect light and other stage equipment. With financial and technical strength, research and development, production and sales of LED lighting products as the core, with extensive involvement in LED lighting, stage lighting and other fields, and in independent research and development while maintaining a good industrial-strength relationship, our products are throughout the major cities in China and are exported to Europe, America, Southeast Asia and other regions.
7R 230W 3in1 Moving Head Light For Wedding Stage Event Features: Amazing dot matrix ,four tact switch, 180° turning show one color wheel, 14 colors and open Gobo: 17 gobos Rotate 8 Facet Rotating Prism, frost 0-100% mechanical dimming, mechanical dimming and free dimming available. strobe macro control available. Lens optical system mechanical focus .beam angle 0~4° Over heat protection Application for: stage performance,TV show,studio,meeting rooms and gymnasium etc. Product Name7R 230W 3in1 Moving Head Light For Wedding Stage Event Power supplyAC120v-240V 50/60hz Power Consumption230W MAX LampOsram MSD Platinum 2R Control ModeDMX,Auto,Sound,Mast/Slave DMX Channels16 Channels DMX Color14 colors+open Gobo17 fixed gobos+open DimmerMechanical Dimmer 0-100% StrobeVariable speed Shutter / Strobe Pan/Tilt540°for pan,270°for Tilt FixturesRemote controller lamp's switch function,display light and lamp's using time Structureheat-proof plastic+module pressing alloy materials IPIP20 Net Weight18kgs Dimension405x345x475mm Carton Packing Size460x430x560mm FAQ: 1.Q: What's the Payment method? A: We can accept T/T, Western Union, Aliexpress Escrow or visit factory in Cash as payment method, 30% deposit before production, the balance before delivery 2.Q: Do you have CE/ROHS certificate? A: Yes, we can offer the CE/ROHS certificates as to your requirements. 3.Q: How does your factory do regarding quality control? A: Quality is priority. GAGA Light people always Pay more to quality controlling from the very beginning to the very end. Also, we provide 2 years warranty for all our products. 4.Q: Can I use my own forwarder to transport the products for me? A: Yes, if you have your own forwarder in Guangzhou or all over China, we can ship the goods to your forwarder and let your forwarder ship the products for you. And then you will no need to pay the freight to us. Guangzhou GAGA Pro Lighting Equipment Co., Limited is a professional manufactory of LED stage light, stage lighting. We produce stage lighting, LED dance floor, LED par, moving head, effect light and other stage equipment. With financial and technical strength, research and development, production and sales of LED lighting products as the core, with extensive involvement in LED lighting, stage lighting and other fields, and in independent research and development while maintaining a good industrial-strength relationship, our products are throughout the major cities in China and are exported to Europe, America, Southeast Asia and other regions.
P.S.B PLUS-Caps are capsules that contains a phophate solubilising bacteria. Encapsulation is based on a novel patented technology developed by ICAR-Indian institute of spices research. The bacterium helps to solubilise fixed phosphorus in the soil and make it available to plants in an easily usable form. SRT and Siesto Green is a Manufacturer and Pramoter of various bio fertilizers and plant growth regulators and formulate various products for getting different results like root formation, stem formation, healthy growth of leaves, excellent flowering etc along with Bio pesticides, non-poisonous biological plant extracts, chelated and PGR based products for controlling different types of Pests and insects and making crop and trees healthy. It stays near the roots and makes the phosphorus available to the plant from soil as well as fertilizers & increases the production significantly. You can Apply Caps once Every Month, just make sure that you donot use any chemical fertilizer or pesticides 7 days before or after using product. Quantity Required Per Acre :- 1 or 2 Capsule Features :- Easy to use, easy to transport, 16 months rack life, 10 times more powerful compared to regular powder or liquid, cost effective, How To Use :- 1)Add 1 capsule to 1 ltr of boiled -cooled Water in Bottle, close the cap, shake the bottle well till capsule get totally disolved in water and leave the solution for 15 minutes. 2.a)Add this solution to required quantity of water and spray or drench it directly on the plants 2.b)ADD this solution to PROM, mix well and mix it to the soil. 2.c)ADD this solution to 200 ltr of water and drip it to plants
P.S.B PLUS-Caps are capsules that contains a phophate solubilising bacteria. Encapsulation is based on a novel patented technology developed by ICAR-Indian institute of spices research. The bacterium helps to solubilise fixed phosphorus in the soil and make it available to plants in an easily usable form. SRT and Siesto Green is a Manufacturer and Pramoter of various bio fertilizers and plant growth regulators and formulate various products for getting different results like root formation, stem formation, healthy growth of leaves, excellent flowering etc along with Bio pesticides, non-poisonous biological plant extracts, chelated and PGR based products for controlling different types of Pests and insects and making crop and trees healthy. It stays near the roots and makes the phosphorus available to the plant from soil as well as fertilizers & increases the production significantly. You can Apply Caps once Every Month, just make sure that you don�??t use any chemical fertilizer or pesticides 7 days before or after using product. Quantity Required Per Acre :- 1 or 2 Capsule Features :- Easy to use, easy to transport, 16 months rack life, 10 times more powerful compared to regular powder or liquid, cost effective, How To Use :- 1)Add 1 capsule to 1 ltr of boiled -cooled Water in Bottle, close the cap, shake the bottle well till capsule get totally disolved in water and leave the solution for 15 minutes. 2.a)Add this solution to required quantity of water and spray or drench it directly on the plants 2.b)ADD this solution to PROM, mix well and mix it to the soil. 2.c)ADD this solution to 200 ltr of water and drip it to plants
