Logiscell+ activated oakum kit is composed of dry oakum soaked into a hydrophilic polymer solution to seal manholes and sewer lines. When wet and caulked in a joint or crack, the resin will foam to form a flexible and tight joint to stop groundwater infiltration. It reacts with water and becomes a watertight rubberlike non-toxic composite. The oakum cord gives strength and density to the composite and makes the application of the resin easier, especially when gushers are present. The kit includes a 1.7-liter bottle of Logiscell+ (hydrophilic resin) and one bag containing a �± 0.6 lbs of dry oakum. 18 liter pails also available. ACTIVATED OAKUM TECHNIQUE: 1) When mixed with water the resin forms a spongy foam which could absorb up to 12 times its volume of water. A non-controlled expansion could create a low-density foam, which is less watertight and resistant. If the oakum is well-inserted and uniform within the area, a good density and expansion is obtained to fill the void and stop leaks. 2) After approximately 40 seconds, the reinforced foam resin starts to react to form a rubbery gasket which becomes hard, watertight and adheres to the surface. Note: If there is a significant flow within the joint or crack, it is preferable to soak the oakum and let it partially react before the insertion in the crack or joint. By holding it tightly within the crack or joint, the resin will not be washed away by the gushing water. This technique can also be used for underwater applications. CAUTION: Prevent any contact with eyes and skin. Always wear PPE (gloves, goggles, disposable suit and mask or respirator depending on the environment). Certain people may be affected by the vapours during the reaction of the resin. To prevent irritation of throat or eyes always ventilate the working area. If it is impossible to ventilate use a mask with appropriate cartridge. Wash hands and face thoroughly after installation.
ER-TS-2186DI Features: 1. Single axis tilt monitoring; 2. Full range accuracy 0.005�°, resolution 0.0007 3. Output frequency 5~100HZ (optional). Introduction ER-TS-2186DI is a high-precision single-axis tilt sensor with a resolution of 0.0007�°, an accuracy of 0.005�°, and a temperature drift of 0.0007�°/â??. The output interface has RS232, RS485, RS422, TTL, CAN, MODBUS bus to choose from. The product is equipped with high-precision digital sensor, which can correct the temperature drift of the sensor according to the monitoring temperature change of the built-in temperature sensor to ensure the repeatability of the product in low temperature and high temperature environments. Its corresponding frequency is 100Hz, the performance is reliable and stable, and the scalability is good, that is, it is suitable for various industrial control environments. Features Single axis tilt monitoring Full range accuracy 0.005�°, resolution 0.0007�° Output frequency 5~100HZ (optional) Wide voltage input DC 11~36V(5V can be customized) Wide temperature working -40~+85â?? Measuring range 0~�±5/�±10/�±15/�±30�° (optional) High vibration resistance >20000g Baud rate 2400~115200 (adjustable) IP67 protection Can output RS232/RS485/TTL/MODBUS (optional) Small volume (107*55*27mm) (customizable) Applications High-voltage wire tower pole monitoring Satellite solar antenna positioning Precision machine tool horizontal control Precision laser platform equipment Medical equipment Tripod head leveling Railway locomotive Based on tilt monitoring Angle control of various construction machinery Inspection of bridges and dams
Oil window: The oil viewing window located on the side of the water pump iseasy to inspect and the oil level is easy to repair. High and low pressure water seal components The high and low pressure dual water seal design of the"U" type "Buna N" material enhances the performance of thewater pump and improves its service life. The plunger support guide ringensures the coaxiality of the plunger, extending the service life of the waterseal and plunger. Pump head assembly: Selected forged brass material, high strength, no porositydefects, long service life, high pressure resistance, stable operation,reinforced 6-bolt fastening, 10mm, grade 8.8. Check valve assembly: The valve cage is made of specialmaterials that are sturdy and durable. The stainless steel 303 and 404 poppetvalves and springs, as well as the brass valve seat and cover, are sturdy anddurable, extending their service life. Pommel Precision machined hard solid ceramic plunger, sturdy anddurable. Crank Axle Accurate rounded corners and process treatment ensure durabilityand service life. Oil seal and O-ring A better crankcase oil sealing system, with stainless steelsprings for oil seals and O-ring seals to ensure sufficient tension. Bearing The positioning of large-sized bearings and snap rings ensuresthe concentricity of the crankshaft connecting rod, ensuring stable operationof the water pump. Bearing Block Precision machining ensures coaxiality and concentricity. Plunger Connecting Rod The high-quality alloy connecting rod has high load strength,durability, and stable operation. Crankcase The surface of the crankcase that has been oxidized by precisioncasting is a classic streamline design.
PRODUCT SUMMARY This Karcher Electric Cold Water HD Series Pressure Washer easily converts from a cart to a skid with the skid feet accessory (not included) for maximum cleaning versatility and durability. This model features a commercial-duty Leuco crankcase pump (backed by a 7-year pump warranty) and a corrosion-resistant aluminum frame with flat-free tires. The low-profile handle and compact footprint makes it easy to maneuver. Bypass loop provides additional pump protection. WHAT'S INCLUDED (1) Electric pressure washer (1) 50ft. high-pressure hose (1) Spray gun (1) Lance (1) Quick-connect nozzle FEATURES + BENEFITS Insulated, fatigue-free, spring-loaded trigger gun with side-grip spray wand makes for easy point-and-shoot cleaning action Four quick-couple nozzles made of hardened stainless steel and color-coded for easy selection of spray pattern: 15�°, 25�°, 40�° and detergent Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated KEY SPECS Item# 104509 Brand Karcher Manufacturer's Warranty 1 year Limited Warranty Ship Weight 180.4 lbs Pressure (PSI) 1,000 Flow (GPM) 3.0 Motor Baldor Horsepower 2.0 Volts 120 Amps 20 Pump Karcher KF Drive Style Direct Gun M407 Nozzle Type Quick-connect Hose 50 ft. high pressure Coupler Size (in.) 3/8 Cart Aluminum Power Cord (ft.) 36 Max. Inlet Water Temp (�°F) 140 Chemical Injector Yes Adjustable Pressure Yes Pump Oil Type SAE 15W-40 Pump Oil Included Yes Dimensions L x W x H (in.) 41 x 22 x 25
Product overview 1. This product is mainly made of epoxy copolymerization of several fatty alcohols. 2. The basic properties of the foaming system are not affected due to its strong anti-foaming and anti-foaming effect. 3. Good heat resistance, stable chemical properties, no corrosion, no toxic, no adverse side effects. Technical specifications �· Appearance: Transparent liquid or light yellow liquid �· Viscosity (25�ºC) : 100 ~ 800 mPa.s �· Solids content: 100% Performance characteristics The white water in the wet end of papermaking, and the medium temperature white water system is more effective. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. Easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorret methods, our company doesn't undertake the responsibilities Packing and storage This product is packed in 25kg, 50kg or 200kg plastic drums. If you have special requirements, you can negotiate and customize. This product is suitable for storage at 0~30, and do not place it near a heat source or expose it to sunlight. Do not add acid, alkali, salt and other substances to this product. Seal the container when not in use. If there is stratification after long-term storage, stir it evenly. Generally, the effect will not be affected. According to general chemical storage methods. Ensure that it is sealed after use. Under the recommended storage temperature and unopened packaging conditions, the shelf life is 12 months from the date of production.
Automatic Voltage Regulator (AVR) AVR Automatic Voltage Regulator (AVR) with on Load Tap changer The On Load Tap Changer, automatic voltage regulator (AVR) is used to compensate the voltage drop in the electrical networkâ?? so that customers at the line end receive the same average voltage value as those closer to the source. The voltage value reduction affects the operational quality of the rotating machines and increases the losses due to the high current drawn due to the voltage reduction. It also affects the quality of the illuminating system. EGYTRAFO Group produces the Automatic Voltage Regulator (AVR) with rating up to 630 A & 9 tapping positions. -The AVR is flange mounted (ON TANK) or (IN TANK) type according to the rating of the transformer and a remote tap changer control cubicle (RTCC) Our ranges are up to 630 A, up to 22 KV and more than 5 taping positions on request. Automatic Voltage Regulator (AVR) applications: you can use it as a safely starting machines such as induction motors and synchronous motors Also, boosters to give a small boost to distribution cable for compensating the voltage drop you can get the same advantage of the Variac Automatic Voltage Regulator (AVR) advantages: Increased KVA rating for a given size and mass Less amount of copper Due to the smaller size, the cost is less compared to a two â?? winding transformer The resistance and reactance are less compared to a two â?? winding transformer and hence it has superior voltage regulation The Volt-ampere rating is more compared to a two â?? winding transformer It is possible to get a smooth and continuous variation of voltage
Dry Transformers up to 3.6 MVA, 33 KV (Indoor & Outdoor) EGYTRAFO Group produces a wide range of Dry type Cast Resin transformers up to 3.6 MVA, 33 KV which are suitable for indoor and outdoor installation (inside an enclosure with certain IP) and ambient temperatures up to 45oC. Dry type transformers is a reliable alternative for oil immersed transformer with low running costs, free maintenance, environmental friendly and suitable for operation under heavy load fluctuations. * Different types: Impregnated LV, Casted HV Casted LV, Casted HV Al â?? Al winding (Aluminum) Cu â?? Cu winding (Copper) * Cooling Methods: Air Natural (AN) Air Forced (AF) : Increased Power by 35-40 % * General Characteristics & Advantages: Fire resistance : In locations where the fire risk associated with the use of mineral oil is unacceptable like offices, shopping complexes, apartment buildings, hospitals etc. Maintenance free: No liquids/oil to contaminate, break down, leak or explode and burn Insensitive to moisture High overloading capacity Long and stable lifetime Installation close to load centers (maximum safety) Easy to connect and install Immediate switch-on Easy to repair No special requirements for installation room Environmentally safe Hardly inflammable Low operational cost and service expenses High performance, reliability and high short circuit strength * Field of Applications: Transportation means as railways underground, trams, and tunnels Locations with vibrations and shocks (like ships and cranes) All products comply to IEC standardsKEMA Certified
Cortex Duo herbicide is a non glyphosate weed killer. It is both a non-selective knockdown & a residual herbicide. You can use this to kill seedling & young broadleaf & grass weeds. It is in Group 14 and contains 525g/L nonanoic acid and 15g/L oxyfluorfen. You can use Cortex Duo in the following areas: In and around Paths; Driveways; Roadsides; Sheds; Gardens; Amenity areas, nearby Nursery stock, Orchards and vineyards, Fallow soils and Forestry. You can also use Cortex Duo herbicide for the control of Moss and Algae in areas like Gardens, Paths, Rockeries, Tiled Roofs, Walls, Driveways and around buildings. Benefits of Cortex Duo Herbicide Available in a 10L pack; As it contains two actives this reduces the chances of resistance developing; Being a non glyphosate weed killer there are no issues with use in public areas; As it contains no glyphosate, it doesnâ??t bleed or move like glyphosate and so it's ideal for line marking; Once it is applied the effects can be seen within hours; It is a 3-6 month residual herbicide; this means no need to constantly reapply; Safe around trees and ornamentals as long as no spray drift; A Low chemical schedule S5 It is also effective against moss, liverworts and algae. Brand: Indigo specialty Group: Group 14 Product Form: EC Pack size: 10L Selectivity: Non Selective Weed: Seedling and young annual and perennial weeds and grasses. Also for moss, algae and liverwort control. Application Rate: 70ml/L water which is 7L/100L. Active Ingredient: 525g/L nonanoic acid and 15g/L oxyfluorfen. Activity: It is a Pre and post-emergent knockdown
Cooling Tower Spray Nozzles The nozzle of cooling tower is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower. As a professional cooling tower spray nozzle manufacturer, we offer different types of water distribution spray nozzles for cooling towers. You can choose what you need from the following products. WHAT IS A COOLING TOWER NOZZLE? Cooling tower nozzles direct the hot water in need of cooling to the tower fill. These provide the water sprays to wet the fill. Uniform water distribution at the top of the fill is essential to achieve proper wetting of the entire fill surface. Nozzles can either be fixed in place and have either round or square spray patterns, or can be part of a rotating assembly as found in some circular cross-section towers. Cooling tower nozzles disperse water across the heat exchanger. They are usually made of PVC, glass or ceramic. Some nozzles are high-temperature resistant and have a non-clogging design. Cooling tower nozzles come in both cross flow and counter flow designs. SOME BENEFITS OF COOLING TOWER NOZZLES Non-Clogging Low Pressure Design Operational Adaptability Efficient Performance Virtually Maintenance-Free Unique Solid Cone Spray Ensures Consistent Distribution Easy Installation & Very Reliable Evenly Distributes Water Comes In Both Spray And Target, With Or Without Grommets
Our organization is engaged in offering a wide range of Automatic Swing Gate. All the swing gates offered by us are developed and designed using superior grade raw material in accordance with industry laid norms and guidelines. These automation swing gates are widely used in houses, offices and gardens. Further, our entire range is stringently tested on the basis of well defined quality parameters so that only high quality material is delivered at clients location within the scheduled time limit. Features: Open and close single or both the gate by remote control. With 1 point for light to be operated with same remote. Can be integrated with most of access control system (RFID, Biometric etc) Can be paired with upto 50 remote to operate the swing gate operator Safely 12volts DC motors eliminating the dangers of electric shock hazard. Overload sensor provide instant stop upon contact with obstacle. Rechargeable back-up battery for 42 hours or 30- cycles when power failure. Remote control transmitter and receiver with code encryption technology. Soft start and stop. The Swing arms are installed above the ground, eliminating common problems of water getting into the motors like underground motors have. It provides multiple mounting choices (swing in/out) Weather resistant housing (IP 54 Protection) Optional Features: Mobile App based barrier Open/ Close- Bluetooth Technology GSM based remote mobile app/ SMS/ Missed Call barrier Open/Close Long Rangle Vehicle identification and barrier Close/ Open- No waiting in queue.
Detection Principle Raycom systems use typical single-mode fiber optic cables as powerful vibration sensors.RBtec uses different technologies for different applications, such as Distributed Acoustic Sensing (DAS) technology and Distributed Vibration Sensing (DVS) technology, as a method of monitoring fiber optic measurements. Fiber optic cables become extremely sensitive to pressure, acoustics, and motion, and are able to detect small vibrations transmitted through fences, soil, or surfaces.Raycom systems can monitor vibration signals along the length of a fiber optic cable, locate intrusion events, and classify specific features based on detection algorithms. Key features and benefits of a fiber optic fence system for a school Intrusion Detection: Fiber optic fence systems use strands of optical fibers embedded in the fence structure. These fibers can detect vibrations and disturbances caused by someone attempting to climb, cut, or breach the fence. Immediate Alerts: When an intrusion is detected, the fiber optic system can instantly send alerts to a central monitoring station or security personnel. This rapid response allows for immediate action to be taken. High Sensitivity: Fiber optic sensors are highly sensitive and can detect even minor disturbances, minimizing false alarms while ensuring accurate detection of potential threats. Zoning Capabilities: The system can be divided into zones, allowing security personnel to pinpoint the exact location of an intrusion. This makes it easier to respond effectively. Integration: Fiber optic fence systems can be integrated with other security systems, such as CCTV cameras, access control systems, and alarm systems, creating a comprehensive security network. Remote Monitoring: Security personnel can monitor the fence system remotely through a computer or mobile device, providing 24/7 surveillance and quick response capabilities. Low Maintenance: Fiber optic fences are generally low-maintenance, requiring minimal upkeep compared to traditional security measures like barbed wire or electrified fences. Tamper Resistance: Since the optical fibers are hidden within the fence structure, it's difficult for intruders to tamper with or disable the system.
Biesse Part No.: 1705A0123 1705A0123 tool holder clips Biesse tool holder (white fork) HSK F63 Biesse HSK 63F tool clips Biesse Rover tool holders Biesse CNC tool gripper HSK63F Biesse HSK 63F plastic tool fork Biesse tool collet HSK F63 1705A0123 HSK F63 Tool Holder Clips for Biesse Rover CNC This Biesse 1705A0123 spare part is the consumable of Biesse Rover CNC. HSK 63F tool fork is for the HSK63F tool holder clamping, used with carousel or side loading tool changer. HSK63F Tool Holder Forks Specifications: 1. Made in China, famous brand 2. Imported USA Dupont white plastic material, high quality, reinforced and anti-explosion. 3. The tool holder clips are resistant to the temperature changes and maintain very precise clutch tolerance. 4. Alloy steel block casting inside, reinforced structure, has high loading capacity, also with steel positioning pins. 4. Dynamic balance grade: G2.5, 30000rpm 5. Yaw precision: 0.005mm 6. Loading capacity: 8-10kgs 7. Last more than 60,000 times tool changing cycles. We have tested. 8. The same material as Italy fork used. The outlook is up to 95% same as Italy made. Lifetime can up to more than 90% of Italy made. 1705A0123 HSK63 plastic grippers are available in stock for quick delivery. Molded plastic with metal insert for rigidity and locking pin for aggregates also are available here. Beside used on Biesse Rover CNC machines, these tool changer grippers are also widely used on CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, Techno, Laguna, Thermwood, Bulleri, ITALMAC Zeus, KDT, Masterwood auto tool changer CNC router machines. They are an exact interchange tool holder gripper.
The Vanta handheld XRF analyzer is one the most advanced handheld X-ray fluorescence (XRF) devices and provides rapid, accurate element analysis and alloy identification to customers who demand laboratory-quality results in the field, it provides fast results in a diverse range of applications. Vanta handheld XRF analyzers are built to be tough. Their rugged, durable design makes them resistant to damage in challenging industrial environments for greater uptime and a lower cost of ownership. With intuitive navigation and configurable software, the Vanta series are easy to use with minimal training for high throughput and a fast return on investment. Featuring innovative and proprietary Axon technology, Vanta analyzers give you accurate results and help boost productivity no matter the environment or working conditions. The Olympus Vanta C Series XRF Analyzer is a handheld X-ray flourescence tester that fuses speed, a wide elemental range and and low limits of detection. Vanta C Series models are equipped with a silicon drift detector and a 40 kV X-ray tube with a rhodium (Rh) anode. Ideal for scrap sorting, PMI, geochemistry, mining, jewelry ID, soil analysis and an array of other applications, the Vanta C Series adheres to IP65 and MIL-STD 810G standards. Features include SmartSort, which shortens or lengthens test time based on material, and real-time grade matching notifications. Kit contents Vanta C series XRF 2 batteries and charger Docking station and accessories Required skills & qualifications Proof of radiation safety training and X-ray safety training Written approval from your radiation safety officer Proven experience with similar equipment (signed off by supervisor) Full liability insurance Additional considerations User will need to provide completed radiation risk assessment User must not be pregnant/breastfeeding while using this equipment Equipment must be used in controlled lab Only to be used by people named in hire agreement Needs secure storage when not in use Further training and support can be provided upon request
The Vanta analyzer is our most advanced handheld X-ray fluorescence (XRF) device and provides rapid, accurate element analysis and alloy identification to customers who demand laboratory-quality results in the field. Vanta handheld XRF analyzers are built to be tough. Their rugged and durable design makes them resistant to damage for greater uptime and a lower cost of ownership. The Vanta Element XRF analyzer series has the performance and portability you need for fast scrap sorting or metal ID. Both the Vanta Element and Vanta Element-S models offer fast grade identification with clear on-screen grade comparisons for easy operation when testing metals. The new Vanta Element-S handheld X-ray fluorescence (XRF) analyzer delivers fast light element detection at an affordable price, joining a family of cost-effective, entry-level Vanta Element XRF instruments. The S model is equipped with a silicon drift detector (SDD) to analyze light elements like magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S) and phosphorus (P) in alloys. Ideal for scrap recycling, basic PMI, metal manufacturing and precious metals, the Vanta Element-S effectively measures ferrous metals, aluminum, copper, stainless steel, nickel and gold karats. The analyzer offers clear on-screen grade ID and comparison for the light elements Mg, Al and Si in seconds. Its SDD detector can distinguish similar alloy grades like 303 stainless steel from 304, and aluminum 6061 or 6063 from 1100. Vanta Element-S analyzers come with the essential features the Vanta series is known for: speed, reliability, ruggedness, connectivity and smartphone-like ease of use. Weighing a slim 2.9 lb. (1.32 kg), the analyzer is up to the challenge of all-day testing for alloy and metal analysis. Powered by Olympus proven Axon Technology, the S model brings the same high-count rate and stability as the rest of the Vanta series for fast results and ROI.
Rolling Shutter Spare Parts | Bottom Plate Section Type: Bottom Plate Section Size 118 mm x 30.35 mm Thickness: 2 mm to 2.5 mm Also available HR or GI Materials Bottom Plate Section for Rolling Shutters If you're in search of reliable and durable bottom plate sections for your rolling shutters, you've come to the right place. Our top-quality rolling shutter parts are designed to provide the utmost security and functionality for your commercial or residential property. Product Features: Durability: Our bottom plate sections are manufactured using high-quality materials, ensuring longevity and resistance to wear and tear. Security: Designed with security in mind, our bottom plate sections are a vital component of your rolling shutter system, enhancing the overall protection of your premises. Precision Fit: Our parts are precision-engineered to fit seamlessly into your rolling shutter system, ensuring smooth operation and peace of mind. Easy Installation: Whether you're a professional installer or a DIY enthusiast, our bottom plate sections are easy to install, saving you time and effort. Price Information: We offer competitive pricing for our bottom plate sections, making it affordable to maintain or upgrade your rolling shutters. Please contact us for a personalized quote based on your specific requirements and quantities. Why Choose Us? As one of the top rolling shutter spare parts wholesalers in Calicut, we take pride in providing top-notch products and excellent customer service. Our experienced team is ready to assist you with all your rolling shutter needs, whether you require spare parts, maintenance, or a complete shutter system. For all your rolling shutter parts and accessory needs, trust the experts. Contact us today to discuss your requirements and receive a quote tailored to your project. We're your trusted partner for rolling shutter solutions in Calicut and beyond.
Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis with a rotation angle of 0 �°~90 �°. When the rotation angle reaches 90 �°, the valve is fully open. The butterfly valve is simple in structure, small in volume and light in weight, and only consists of a few parts. Moreover, the valve can be quickly opened and closed only by rotating 90 �°, which is simple to operate. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two sealing types: elastic seal and metal seal. For elastic sealing valves, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. The valve with metal seal is generally longer than the valve with elastic seal, but it is difficult to achieve complete sealing. The metal seal can adapt to higher working temperature, while the elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used for flow control, the main thing is to correctly select the size and type of the valve. The structure principle of butterfly valve is especially suitable for making large diameter valves. Butterfly valves are not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also used in the cooling water system of thermal power plants. There are two kinds of butterfly valves commonly used: wafer type butterfly valve and flange type butterfly valve. Wafer type butterfly valve uses stud bolts to connect the valve between two pipe flanges. Flange type butterfly valve has flanges on the valve, and bolts are used to connect the flanges on both ends of the valve to the pipe flanges.
Introducing our premium Linen Cotton fabric - a perfect blend of nature's best fibers to elevate your clothing and home textiles. This product description highlights the exceptional qualities of our linen cotton fabric, making it an ideal choice for various applications: Natural Blend: Our linen cotton fabric is crafted from a thoughtfully balanced combination of linen and cotton fibers. This blend maximizes the benefits of both materials, creating a fabric that is luxurious, breathable, and exceptionally comfortable. Breathable Comfort: Experience the bliss of staying cool and fresh, even in the hottest of climates. The inherent breathability of linen and cotton allows air circulation, making our fabric the perfect choice for warm-weather garments like shirts, dresses, and casual wear. Soft to the Touch: Revel in the gentle caress of our linen cotton fabric against your skin. The softness of cotton complements the texture of linen, resulting in a fabric that is smooth, delicate, and incredibly pleasant to wear. Enduring Durability: Our linen cotton fabric boasts the strength and resilience of both fibers, ensuring longevity and resistance to wear and tear. You can trust that your garments and home textiles made from this fabric will stand the test of time. Versatile Style: Whether you're designing chic apparel or elegant home d�©cor, our linen cotton fabric provides a timeless, sophisticated appeal. Its versatility allows you to create anything from sophisticated dresses and casual tops to refined curtains and graceful tablecloths.
Material: Our Poly-Cotton T-shirts are skillfully crafted using a premium blend of polyester and cotton fibers. The combination of these two fabrics results in a garment that offers the best of both worlds. The polyester provides durability, wrinkle resistance, and color retention, while the cotton ensures breathability, softness, and a smooth texture against the skin. Comfort: At Alphaiva, we understand that comfort is paramount. Our poly-cotton tees are thoughtfully designed to offer a cozy and lightweight feel, making them an ideal choice for all-day wear. Whether you're out for a casual stroll, hitting the gym, or simply lounging at home, these T-shirts will keep you feeling comfortable and at ease. Style: Embrace a timeless yet contemporary look with our Poly-Cotton T-shirts. Versatile and effortlessly chic, they can be paired with a variety of outfits, making them a staple in any wardrobe. From classic solid colors to trendy patterns, our extensive collection caters to diverse fashion preferences, ensuring there's something for everyone. Durability: Alphaiva takes pride in its commitment to quality craftsmanship. Our Poly-Cotton T-shirts are designed to withstand the test of time, maintaining their shape and color even after multiple washes. You can trust that these tees will remain as vibrant and stylish as the day you first wore them. Perfect for Every Occasion: Whether it's a laid-back weekend outing, a casual workday, or a social gathering with friends, our Poly-Cotton T-shirts effortlessly complement any setting. Dress them up with a blazer for a semi-formal look or dress them down with jeans or shorts for a more relaxed vibe. With Alphaiva's Poly-Cotton T-shirts, you'll always look and feel your best. Environmentally Conscious: At Alphaiva, sustainability is a core value. Our Poly-Cotton T-shirts are created with eco-friendly practices in mind, promoting responsible consumption and a greener future. Embrace comfort, style, and durability with Alphaiva's Poly-Cotton T-shirts. Elevate your wardrobe with our thoughtfully crafted garments, designed to inspire confidence and leave a lasting impression wherever you go.
Hi-Rise led street light is a new LED street light released by Hishine Group Limited. The LED street light shell is made of ultra-thin Die-Casting aluminum, which makes the LED street light have good heat dissipation performance. Under the same conditions, the light decay of the LED street light is about 20% less than other ordinary LED street lights. In addition, Hi-Rise LED street light has a unique buckle design, which can easily install the street light on both sides of the road. Hi-Rise LED Street Light Features 1.Waterproof IP65,high thermal conductivity housing 2.Beam angle TypeII,TypeIII,TypeIV,TypeV,25�° 60�° 90�° PC+glass lens 3.Support smart control: photocell, motion sensor, lora, zigbee etc. 4.High lumen SMD3030 chip, luminous efficacy 175Im/w 5.Ultra slim heat sink design makes the lamp lighter and betier in heat dissipation Advantages of LED street lamps Hi-rise LED Street Light is the most cost-effective professional LED street light launched by Hishine Group. Hi-rise was designed to provide customers with tool-free installation, lower maintenance costs, and lower operating costs. Hi-rise LED Street Light features modern streamlined geometry, exquisite design, attention to detail, and outstanding application performance, energy efficiency and system reliability. LED Street Light Beam Angle Hi-rise LED Street Light has obvious advantages in structural strength, corrosion resistance and heat dissipation due to its strong structure and smooth design. Secondly, Hi-rise LED Street Light has excellent light quality. 250 w Lumen Output can reach 43750 LM, Luminous Efficacy is as high as 175 w/LM, and there are TypeII, TypeIII, TypeIV, TypeV, 25 to 60 , 90 a variety of optional light Angle.
Peanuts are popularly used as seed oil in Bangladesh. Peanuts are also taken as snacks in many households especially in Bangladesh. In reality, peanuts are actually legumes. But since they have all the properties of nuts like almonds, cashew nuts, etc. The special variety peanut of this area is world famous in its flavor, taste and aroma. Raw Groundnut valued for its protein contents, which is of high biological value. Groundnut contains more protein then meat, two and half more than eggs and more than any other vegetable food. It also contains phosphorous, thiamin and niacin that help in building resistance against all infections, such as Hepatitis and tuberculosis. We can offer Groundnut/Peanuts Peanuts Long Type (Bold Type): Long/Bold Type 38-42, 40-50, 50-60, 60-70, 70-80, and Crushing Grade Quality Counts/Ounce Peanut Round Type (Java Type): Round Type(Java Type) 40-50, 50-60, 50-60, 60-70, 70-80, 80-90, 90-100, 140-160 Counts/Ounce Jute Bags Packing: - We shall be able to provide in 5Kg, 10 kg, 15 Kg, 25 kg and 50 Kg jute bags packing. Vacuum Packing: - For special requirements for our buyers, we can provide the cargoes in 10 kg, 12.5 kg and 25 kg vacuum packed PP bags
