All types of industrial bushes & plates, non ferrous metal casting, oilless bushes, parts made outer from sintered bronze / iron sintered self lubricating bushes | graphite filled bronze bushes & plates, non ferrous (gun metal, phosphor bronze, aluminum bronze etc.) | gun metal bushes | phosphor bronze bushes | aluminum bronze bushes | non ferrous casting | customized bushes as per client requirement, and their alloys starts from .050 gram to 1000 kgs of single pc. as per customer specification and drawings. crown engineers is having all type of production machinery including vmc, cnc, in house spectrometer, heat treatment .
DIN 1.2344 tool steel round bar, flat bar, and plate. 1.2344 Tool Steel/H13 steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications.
DIN 1.2344 tool steel round bar, flat bar, and plate. 1.2344 Tool Steel/H13 steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications.
Metallized YIG Microwave ferrite substrate Technical requirements: 1- The Ferrite Thickness should be 0.37mm. In the process of ferrite production, fine grinding method should be used. The surface of the ferrite should be polished (To reduce the roughness). Material:CY1780 2- Use a soft gold coating. Clad layer: Cu1 m 4 m Au2.5 m 5.7 m. The plating thickness should be 8~10 m(Red area ). 3- The bottom side will be attached to a Gold plated carrier by soldering. The solder paste model can be Pb63Sn37. The carrier material is Iron. Clad layer: Cu3 6 m Ni1 4 m Au1 2 m. The final carrier dimensions (after plating) are 12mm X 9mm X 0.5mm. 4- The resistive layer should be 75 Ohm/Sq. The final resistor should be 50 Ohm (+/-10% tolerance) (Green area)
Microwave ferrite for isolator NOTES: 1.MATERIAL: TTVG-1850 2.MATERIAL SHALLBE FREE OF CRACKS AND VOIDS 3.ESL-9912 SILVER OR EQUIVALENT, .0006THK.(ONE SIDE ONLY) 4.MASK BORDER .015 WTH PLATING AROUND EDGESNOT TO EXCEED 5%.
supply 0-20mm sheet metal and steel wire stamping parts,metal forming,metal fabrication,metal structure,sheet metal bending,pipe cutting and bending,tube fabrication,tie rods,welding parts,weldment,pipe and steel.equipped stamping machine,oil hydraulic press,bending machine,laser cutting machine,punching machine,turrent punch press,can produce material is carbon steel,alloy steel,aluminium alloy,stainless steel.pickled & oil,cold rolled,hot rolled,galvanized plate
PV Cable Specification: Conductor:Soft annealed stranded tin-plated copper; Insulation: Electron beam cross-linked material(XLPE); Jacket:Electron beam cross-linked material(XLPE); Applicable Standard: 2PFG 1169/08.2007; Area.(mm²):1.5/2.5/4/6/10/16/25/35; Rating voltage:DC1000V; Permissible temperature:-40~+120; Short circuit temperature:+200(at the conductor max.5sec); Expected usable life:>25 years; RoHS/Environmental Data:RoHS-conform.
Grade a Processed Frozen Chicken Paw Weight Per Piece (15g to 40g) Assorted No Feather, No Black Pad, No Blood, No Bad Smell, No Black Nail, No Bruise, Well Cleaned, Without Yellow Skin and Outer Nails. Plate Freeze, Blast at -40 Degree C and Maintained at -20 Degree C Packing Spec : Packed in 5kg Poly Bags, 4 X 5kg 20kg Per Carton, 28mt Per 40 Rhc Container.
4 Rails Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:14A(Diode 25A); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP67;Safety degree:II; Flame Class:UL94-V0;Diode Number:Each 1PC; Ambient temperature range:40 85 (IEC); Upper limiting temperature:110 (IEC); Suitable cable cross sections:2.5-6mm2 (14-10AWG); Range of cable gland(mm):O.D.:4.8-6.2; Ribbons size(mm):6(W) 0.2-0.4(T);Connection of bus ribbons:Clamp.
Glass To Glass Edge Connector Product Specifications: Insulation material:PA/CU;Rated voltage:1000V&1500VDC; Rated Impulse voltage:16KV;Test voltage:8kV(50Hz,1min); Contact resistance:�¢?�¤ 0.25 m ;Contact material:Copper,Tin plated; Degree of protection:IP68(In potting);Overvoltage category/Pollution degree:CATIII/2; Safety degree:II;Flame class:UL94-V0;Installation type:Outdoor,UV resistant(F1); Ambient temperature range:-40 85 (IEC);Suitable cable cross sections:2.5 4mm2/14~12AWG;Connecting system:Soldering; Upper limiting temperature:110 (IEC);Reference standard:TUV/CE(IEC62852:2014).
PV-NEHP01 Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:30A(With diode); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP68(in potting);Safety degree:II; Flame Class:UL94-V0;Ambient temperature range:-40 85 (IEC); Suitable cable cross sections:6mm2 (10AWG);Diode Number:Each 1PC; Upper limiting temperature:110 (IEC);Range of cable gland(mm):O.D.:6.0; Ribbons size(mm):Max.8(W) 0.2-0.5(T);Connection of bus ribbons:Soldering.
PV 2 to1 YH Type Cable Harness with inline fuse 1500VDC Product Specifications Insulation material:PPE/TPE/PA Rated voltage:1500VDC Rated Impulse voltage:12KV Test voltage:8kV(50Hz,Imin) Contact resistance: 0.25m Contact material: Copper,Tin plated Degree of protection:IP68(1m,1H) Overvoltage category/Pollution degree:CATIII/2 Regulatory approval:TUV/CE(IEC62852:2014) Safety degree:II Flame class:UL94-V0 Installation type:Outdoor,UV resistant(F1) Ambient temperature range Suitable cable cross sections:1.5~10mm2/16~8AWG Connecting system:Crimp connection
Supply agriculture machine parts,tractor parts,combine body parts,plough,footplate,garden machine parts.3 point suspension hitch tractor,john deere,mower body,shift rod,gear shift rod,brake pedal,control stick,knife,cutter,balde,ripper, transplanter, seeder, thrasher,plow machine, paddy pounder, Cultivator, lawnmower.agricultural,farm,suspension mechanism for tractor, it include stabilizing plate,draft link,lower link assembly,center link,lift link,rod,anchoring chain,U-hook,lock pin,rubber link,
4in1 Piercing connector(IPC4116120) Product Specification: Insulation material:PA+CU; Safety degree:II; Rated voltage:1500VDC/1000VAC; Flame class:UL94-V0; Suitable cable cross sections:Tap:2.5~16mm2 (OD Max.9.0) / Main:10-120mm2 (Al/CU); Installation type:Outdoor,UV resistant(F1); Contact resistance: 5 m; Ambient temperature range:-40+85 Contact material:Copper,Tin plated; Connecting system:Lock connection; Degree of protection:IP67; Nut cap locking force:12Nm; Overvoltage category/Pollution degree:CATIII/2; Upper limiting temperature:110 (IEC).
Description: Pump-over wine fermentation tank is primarily intended for maceration of grape pomace, by pumping the juice from bottom and pouring it from top to the cap. It's also used as a classic wine storage tank as demand. Features:Â 1. Sprinkler and circulation pipe enable the must to be pumped under the cap, which helps the maceration better and faster. 2. Big rectangular mandoor provides an easy dicharging of rape by manual . 3. The large rectangular mnahole makes the emptying and cleaning of the tank easy and simple. 4. Filting grid mounted onto the interior tank to filt the residuel, and filtering plate at the drainage port for further filtering.
ESP Cable Solutions Co., Limited(ESPCS) exporting more than 20 million feet of Thermocouple wire and 30 million of PTFE insulated wire(Nickel Plated Copper and other types) to North America market every year. The main reason is because our products have excellent performance and very outstanding advantages, the advantages as below for your reference. 1.The production process we use PTFE tape wrapped and fused process, which not only ensures excellent performance but it is also can proof moisture. 2.We can make 20,000ft wire in a continuous length without any splices. 3.The PTFE wires are tested to withstand temperatures up to 330. Type: 16AWG KN Wires Thermocouple Wires, 20000ft per Spool
ESP Cable Solutions Co., Limited(ESPCS) exporting more than 20 million feet of Thermocouple wire and 30 million of PTFE insulated wire(Nickel Plated Copper and other types) to North America market every year. The main reason is because our products have excellent performance and very outstanding advantages, the advantages as below for your reference. 1.The production process we use PTFE tape wrapped and fused process, which not only ensures excellent performance but it is also can proof moisture. 2.We can make 20,000ft wire in a continuous length without any splices. 3.The PTFE wires are tested to withstand temperatures up to 330 Degree Celsius. Type: 24AWG Type-K Thermocouple Wires, 20000ft per Spool
ESP Cable Solutions Co., Limited(ESPCS) exporting more than 20 million feet of Thermocouple wire and 30 million of PTFE insulated wire(Nickel Plated Copper and other types) to North America market every year. The main reason is because our products have excellent performance and very outstanding advantages, the advantages as below for your reference. 1.The production process we use PTFE tape wrapped and fused process, which not only ensures excellent performance but it is also can proof moisture. 2.We can make 20,000ft wire in a continuous length without any splices. 3.The PTFE wires are tested to withstand temperatures up to 330 Degree Celsius. Type: 28AWG Thermocouple Wires & Cables, 20000ft per Spool
1500VDC PV4.0 Cable Connector Product Specifications: Insulation material: PPE/PA; Safety degree: II; Rated voltage: 1500VDC; Flame class: UL94-V0; Rated Impulse voltage: 12KV; Installation type: Outdoor,UV resistant(F1); Test voltage: 8kV(50Hz,1min); Ambient temperature range: -40~+85; Contact resistance: Suitable cable cross sections:1.5~10mm2/16~8AWG; Contact material: Copper,Tin plated; Connecting system: Crimp connection; Degree of protection: IP68(1m,1H); Nut cap locking force: 1.5-1.8Nm; Overvoltage category/Pollution degree: CATIII/2; Upper limiting temperature: 110 (IEC); Regulatory approval: TUV/CE(IEC62852:2014).
1500VDC PV4.0 Cable Connector Product Specifications: Insulation material: PPE/PA; Safety degree: II; Rated voltage: 1500VDC; Flame class: UL94-V0; Rated Impulse voltage: 12KV; Installation type: Outdoor,UV resistant(F1); Test voltage: 8kV(50Hz,1min); Ambient temperature range: -40~+85; Contact resistance: 0.25; Suitable cable cross sections:1.5~10mm2/16~8AWG; Contact material: Copper,Tin plated; Connecting system: Crimp connection; Degree of protection: IP68(1m,1H); Nut cap locking force: 1.5-1.8Nm; Overvoltage category/Pollution degree: CATIII/2; Upper limiting temperature: 110 (IEC); Regulatory approval: TUV/CE(IEC62852:2014).
