Finish: ZINC PLATED, Galvanized, Chrome Plated, Nickel Plated, Black Material: Carbon steel, alloy steel, 4140, 42CRMO, B7, Stainless steel 304/316, brass Place of Origin: China Brand Name: Milfast Standard: DIN975 DIN976, UNI6547,BS2693,ASME B 18.2.1,DIN6914,ASME /ANSI /IFI Product name: Stud Bolts Packing: Caton+pallet or as your requirement Application: Heavy Industry, Mining, Water Treatment, Healthcare, Retail Industry, Food & Beverage, General Industry, Oil & Gas, Automotive Industry Size: Diameter 1/2-4 1/2,M2-M72 MOQ: 1000PCS OEM: Acceptable Selling Units: Single item Single package size: 25X15X20 cm Single gross weight: 25kg
Code: SWC-JKFR 701 MATERIAL: Pyrovatex treated 100% Cotton. INTERNATIONAL STANDARDS:EN 11611, EN 11612, EN 61482, NFPA70E. COLORS:Navy Blue, Royal Blue, Red, Orange, Yellow, Turmeric Yellow, Khaki. SIZE - XS,S,M,L,XL,2XL,3XL,4XL,5XL,6XL FEATURES: High collar Two flap pockets on chest Two way concealed Industrial Grade (Brass/Nylon) zip fastening. Two pockets on sides of the jacket Pen pocket on left sleeve Elasticized waist Reflective tapes on shoulders and arms Side Vents Adjustable FR Velcro cuffs opening Bartacking done in places where more strength is needed to support extra load.
The scope of application The light used for zone 1,zone 2 dangerous place,explosive air mixture:lA, IIB,IC,as the illumination of platform boundary light and vessel deck. Products characteristic 1.The shell adopt good quality cast brass alloy materiall,with spraying plastics on surface. 2.The outside tighten screw is stainless steel material. 3.The lampshade has the function of temperature resistance shake up. 4.The ilumination adopt LED,the working life can get up to 50000 hours. 5.The LED starter has stabled components,to assure that the circuit has a long lifetime,and it has the protection for the short circuit and over load, to assure that the LED light work for long term. 6.Approval by ATEX-B,certificate number TA***
The scope of application The light used for zone 1,zone 2 dangerous place,explosive air mixture:lA, IIB,IC,as the illumination of platform boundary light and vessel deck. Products characteristic 1.The shell adopt good quality cast brass alloy materiall,with spraying plastics on surface. 2.The outside tighten screw is stainless steel material. 3.The lampshade has the function of temperature resistance shake up. 4.The ilumination adopt LED,the working life can get up to 50000 hours. 5.The LED starter has stabled components,to assure that the circuit has a long lifetime,and it has the protection for the short circuit and over load, to assure that the LED light work for long term. 6.Approval by ATEX-B,certificate number TA***
The scope of application The light used for zone 1,zone 2 dangerous place,explosive air mixture:lA, IIB,IC,as the illumination of platform boundary light and vessel deck. Products characteristic 1.The shell adopt good quality cast brass alloy materiall,with spraying plastics on surface. 2.The outside tighten screw is stainless steel material. 3.The lampshade has the function of temperature resistance shake up. 4.The ilumination adopt LED,the working life can get up to 50000 hours. 5.The LED starter has stabled components,to assure that the circuit has a long lifetime,and it has the protection for the short circuit and over load, to assure that the LED light work for long term. 6.Approval by ATEX-B,certificate number TA***
Fiber laser cutting machine is an automated metal cutting system that uses a CNC controller to drive a laser beam along a tool path generated by CAD/CAM software to achieve a fine precision cutting tool for metal processing drawings. sheet metal and tubing, and can cut flat and beveled metal shapes and profiles. With the help of a robotic arm, it can perform personalized 3D cutting. Non-contact cutting does not damage the substrate and the point irradiation area has less thermal impact. Fiber laser cutting machine is able to cut carbon steel, stainless steel, spring steel, silicon steel, aluminum, galvanized sheet, pickled sheet, gold, silver, titanium, copper, brass and alloys, which makes it popular in sheet metal processing, elevator manufacturing, electrical and electronic appliances, automotive parts, machinery manufacturing, precision parts, marine aviation, customized advertisement, and metal crafts.
Laser Cutting Machine Hisman is always developing better applications of laser technology for better cutting and attaches great importance to innovation. We insist on focusing on a single category of laser cutting machines, achieving full coverage of products in the power range of 1,000W-20,000W, providing customized and specialized metal cutting solutions, and effectively creating value for our customers. Metal fabrication shops and companies that make customized metal parts can dramatically increase productivity with our fiber laser cutting machines. Our machines are capable of cutting steel, brass, aluminum, and stainless steel without having to worry about back reflection damaging the machine. By using these fiber laser cutting machines, you will reduce maintenance requirements and significantly lower operating costs.
Spring dial scale 100 kg Bimetal steel. As you know, spring dial scale is a kind of metal (spring in specific) that shrinks at low temperature and stretches at high temperature. This characteristic of metal makes the scale become less precise. To counter this effect, BenThanh Scale mounted Bimetal steel leaf in the transmission lever to keep the scale operating precisely even under harsh temperature condition. At transmission lever joints, brass bushes are fitted up in addition to the use of lubricant help to prevent rust and minimize abrasion, thus enhance life-span of scale especially when scale is used in high humid environment. Protective pipes are also used to conserve lubricant and limit water and dust from getting into the joints. Inox Plate. Scale plate is made of inox (stainless steel). Loading frame. Loading frame is made of 5mm thickness steel to enhance longevity of the scale.
Product Description The Abu Garcia Orra Inshore Baitcasting reel is designed for the inshore angler. This reel combines both value and performance in a lightweight compact package. This reel is designed for saltwater use with corrosion fighting components. Features 6 stainless steel HPCR bearings + 1 roller bearing provides increased corrosion protection X-Cr�¤ftic alloy frame for increased corrosion resistance Graphite sideplates and Large PVC knobs Carbon Matrix hybrid drag system for super smooth reliable drag performance MagTrax brake system gives consistent brake pressure throughout the cast Duragear brass gear for extended gear life Extended bent handle for increased cranking power Ti coated line guide reduces friction and improves durability
Product Description The Abu Garcia Orra SX Baitcasting Reels are built from a durable lightweight aluminum frame and spool providing reliability and performance. These baitcasting reels also feature a smooth performing Power Disk drag system which provides up to 15 pounds of drag. These reels give anglers remarkable cast control. Features: 7 stainless steel ball bearings + 1 roller bearing provides smooth operation X-Cr�¤ftic alloy frame for increased corrosion resistance Graphite sideplates Power Disk drag system gives smooth drag performance MagTrax brake system gives consistent brake pressure throughout the cast Compact bent handle and star provide a more ergonomic design Duragear Brass Gear for extended gear life
Product name: cnc precision auto parts Services: CNC Machining Services, CNC Machining Parts, Custom Machining Parts, Precision Machining Parts, Prototype Machining Components Process: Rapid prototyping, CNC machining, CNC turning, CNC milling, CNC drilling, CNC tapping, etc Material: Steel, Stainless steel, Aluminum, Copper, Brass, Titanium, Magnesium, Zinc, Plastic, Carbon fiber, etc. Finished: Bead blasting, Anodizing, Polishing, Painting, Plating, Powder coating, Black oxide, etc. As machined: Ra 3.2, break sharp edges and remove burrs. General tolerance: ISO 2768-mK If you want to know more information, please feel free to contact us; Upon receipt of your feedback, we will share you more relevant information and working videos for your reference.
Product Description The Gaggia Classic is one of our best sellers since we began Whole Latte Love in 1997. Over time, Gaggia has added improvements designed to enhance the user experience while staying true to their commitment to produce espresso equipment that is on par with the best in the industry. New to 2003 Gaggia has replaced the nickel plated carbon steel housing with brushed stainless steel. This produced a machine with an even more durable housing that will not rust or flake overtime. The portafilter handle was also upgraded to include a stainless steel dispensing beak. This improved consistency of the espresso flow when split between 2 demitasse cups or shot glasses. The main design of the portafilter remained the same at a whopping 1 pound of chrome plated brass with a commercial size, 58mm diameter.
Code: SC 1103 Material: 100% Cotton OR Cotton & Polyester Blend. SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Description: Flat coat collar Two flap chest pockets with snap buttons. Two patch pockets on back Two-way concealed heavy duty industrial grade (brass/nylon) zip fastening. Pen pocket on left sleeve Elasticized back Hanger loop on collar Two trouser pockets Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
Enriched with a vast industrial experience, we are engaged in manufacturing, supplying and service providing of Electronic Water Conditioner. Used in various industrial applications as well as household purposes. This conditioner is made as per the industry standards. We have developed our range in various specifications to meet individual requirements of the clients. Moreover, clients can also take the benefit of timely delivery of these products. Features: Fit & forget maintenance free. No salt or chemicals needed. No maintenance, easy to install. Mains pressure and flow rate unaffected. Retains healthy minerals. Little space required and safe. Low running cost, negligible. Power consumption. Effective on RPVE, UPVC, CPVC, Copper, Brass, SS304, SS316. No waste water. Available in 1 , 1.5 , 2 , 2.5 3 & 4
Metal Bead Curtain A metal bead curtain is a decorative and visually captivating element made from metallic beads that are linked together to form a curtain-like structure. This type of curtain is commonly used in interior design, architecture, event d�©cor, and artistic installations to add texture, movement, and a touch of luxury to spaces. Metal bead curtains consist of individual metallic beads, often made from materials like stainless steel, aluminum, brass, or other metal alloys. These beads can vary in size, shape, and finish to create different visual effects. The beads are linked together in a chain-like manner, allowing them to move and cascade gracefully when disturbed, creating an engaging and dynamic visual display.
Manufacturers & exporters of all kind of safety gloves safety wears and sports goods including: 1 high quality split leather working gloves. 2 heavy duty welding gloves. 3 red heat welding gloves 4 tig welding gloves. 5 driver gloves m/o goat or sheep skin leather. 6 cotton gloves 7 aprons & sleeves 8 brass rods 9 soccer balls 10 soft balls/hard ball 11 apparels & accessories 12 sports uniform 13 casual wears 14 customised caps 15 gym fitness equipments 16 sports wears etc.
Edm wear parts, edm consumables, and edm tools, edm wear parts includes diamond wire guide, power feed contact, water nozzle, ceramic rollers, cables, motors, rotational head, pcb control board for edm maintenance parts, edm consumables include edm brass wire, edm filter, molybdnume wire, edm electrodes, edm ion exchange resin, edm copper tungsten material, edm tools such as edm precision vise, edm fixture board, edm rails, edm jig holder, 3r syestem clamping tools.Export