D8r year 2012 cnf jebel Ali dubai 67,000usd
Cat 320D2 year 2017 60,000usd cnf jebel Ali this is brand new machine Low hours machine,, by container.
A scale, $144ton. MIX-scale, $72 ton. C-scale, $36 ton. FOB
The pouring system is composed of a gate cup, a straight gate, a horizontal gate, and an inner gate. It is a channel opened inside the mold to introduce liquid metal into the mold cavity. The function of the pouring system is to control the speed of metal liquid filling the mold and the time required to fill the mold; Ensure that the metal liquid enters the mold smoothly, avoiding turbulence and erosion of the mold; Prevent slag and other inclusions from entering the mold cavity; During pouring, do not involve gas and try to ensure that the casting cools down in accordance with the principle of sequential solidification. The pouring system includes: 1. Pouring cup. The metal liquid poured into the ladle, also known as the external gate 2. Straight gate. Connect the outer gate and the transverse gate to introduce molten metal from the outside of the mold into the inside of the mold 3. Horizontal gate. Connect the straight gate and distribute the metal flow from the straight gate. 4. Inner gate. Connect the transverse gate and inject molten metal into the mold cavity. The function of the pouring cup is to guide the liquid metal poured from the ladle into the straight gate. The gate cup of small castings is mostly funnel-shaped, and the diameter of the upper gate should be more than twice that of the straight gate, and it is generally made directly on the mold during molding.
Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impelle
Lead pot cover The cover plate is composed of 10mm thick steel plates 5) Furnace insulation cover (movable): outer layer 6mm, inner layer 60mm Heat insulation (the furnace insulation cover is formed by one-time stamping, Manual lifting, capable of 360 degree rotation)
gating system The pouring system is composed of a gate cup, a straight gate, a horizontal gate, and an inner gate. It is a channel opened inside the mold to introduce liquid metal into the mold cavity. The function of the pouring system is to control the speed of metal liquid filling the mold and the time required to fill the mold; Ensure that the metal liquid enters the mold smoothly, avoiding turbulence and erosion of the mold; Prevent slag and other inclusions from entering the mold cavity; During pouring, do not involve gas and try to ensure that the casting cools down in accordance with the principle of sequential solidification. The pouring system includes: 1. Pouring cup. The metal liquid poured into the ladle, also known as the external gate 2. Straight gate. Connect the outer gate and the transverse gate to introduce molten metal from the outside of the mold into the inside of the mold 3. Horizontal gate. Connect the straight gate and distribute the metal flow from the straight gate. 4. Inner gate. Connect the transverse gate and inject molten metal into the mold cavity. The function of the pouring cup is to guide the liquid metal poured from the ladle into the straight gate. The gate cup of small castings is mostly funnel-shaped, and the diameter of the upper gate should be more than twice that of the straight gate, and it is generally made directly on the mold during molding.
Slag casting machine The slag casting machine is used for casting copper slag or lead slag. Copper slag is mainly used for casting converter slag, and lead slag is mainly high lead slag discharged from the casting oxidation furnace. Workflow: After the slag flows out of the furnace, it flows into the slag mold of the slag casting machine through a chute from the casting point. The slag mold is fixed on the chain conveyor, and the slag inside the slag mold is gradually transported from the casting point to the slag ingot outlet through the air and water cooling areas by the chain conveyor on the slag casting machine, and then discharged.
Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impeller
Lead liquid mixer During the impurity removal process of crude lead refining, it is necessary to put the refining auxiliary materials into a lead pot containing liquid lead liquid, and use a mixer to stir the lead liquid to promote contact between the auxiliary materials and the lead liquid. The conventional stirring method is to install vertical blades at the bottom of the stirring shaft, and place the stirring shaft at the center of the lead pot for stirring.
This equipment is widely used in manufacturers of aluminum alloy ingots and zinc alloy ingots. It has the characteristics of automatic aluminum water distribution, adjustable casting speed, automatic ingot tapping and demolding, high production efficiency, uniform aluminum ingot weight, no large or small ends, and smooth surface. The casting process has a high degree of automation and low labor intensity. The casting mold is made of ductile iron, with a long service life
Grade900 Series Place of OriginShandong China Model NumberSteel Bar TypeRound Application construction Machined components ShapeRound Special UseValve Steels Tolerance1 1 Processing ServiceBending Welding Decoiling Punching Cutting Steel Grade301L S30815 301 304N 310S S32305 410
304/316/310/210/410 Stainless steel Pipe Type:Seamless/Welded Steel Grade:300 Series, 301L, 301, 310S, 410, 316L, 316, 410L, 301L, S30815, 301, 304N, 310S, S32305, 410, 204C3, 316Ti, 316L, 441, 316, L4, 420J1, 321, 410S, 410L, 436L, 443, LH, L1, S32304, 314, 347, 430, 309S, 304, 439, 204C2, 425M, 409L, 420J2, 436, 445, 304L, 405, 370, S32101, 904L, 444, 301LN, 305, 429, 304J1, 317L Application:indoor/outdoor gas system Welding Line Type:Seamless Outer Diameter:22mm Tolerance:�±1% Processing Service:Bending, Welding, Decoiling, Punching, Cutting, Moulding Grade:
Rotary tilting refining furnace The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace. The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal. When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent ( graphite) to the furnace material.
The material is Q245R boiler steel plate (=25mm), and the bottom of lead kettle is hemispherical body. Lead pump is used to transport from refining kettle to alloy configuration kettle. Chemical composition and mechanical property of Q245R
Walks generation limited co deals in export of cashew nuts, sisal fiber, battery scraps, used rails scraps, aluminum wire scraps, almond nuts, cloves, macadamia nuts, black pepper, white pepper,donkey skins & hides, a4 copy paper, face masks,,n95, gloves ,car accessories, car engines, hides & skins, animal skins & hides, snails, aluminum rails, copper wires & cables, copper cathodes, cobalt, ferterlizer , urea 46 % fertilizer.
1. Excavators are important and widely used equipment in construction industry. Their general purpose is to excavation but other than that they are also used for many purposes like heavy lifting, demolition, river dredging, cutting of trees etc. 2. Backhoe is another widely used equipment which is suitable for multiple purposes. This is well useful for excavating trenches below the machine level and using front bucket loading, unloading and lifting of materials can be done. 3. Dragline excavator is another heavy equipment used in construction which is generally used for larger depth excavations. For the construction of ports, for excavations under water, sediment removal in water bodies etc. can be done by dragline excavator. 4. Bulldozers are another type of soil excavating equipment which are used to remove the topsoil layer up to particular depth. These are widely used for the removal of weak soil or rock strata, lifting of soil etc. 5. Pile Driving Equipment. Another heavy equipment used in construction site is pile driving equipment in case of pile foundation construction. 6. Pile boring equipment is used to make bore holes in the construction site to install precast piles. 7. Dump trucks are used in construction sites, generally, in big construction site, off-road dump trucks are used. 8. Feller buncher is tree cutting heavy equipment used to remove large trees in the construction field. 9. Telehandlers are hoisting equipment used in construction to lift heavy materials up to required height or to provide construction platform for workers at greater heights etc. 10. Compactors or Rollers are used to compact the material or earth surface. Different types of compactors are available for different compacting purposes. 11. Paver or Asphalt paver is pavement laying equipment which is used in road construction. 12. Tower cranes are fixed cranes which are used for hoisting purposes in construction of tall structures. Heavy materials like pre-stressed concrete blocks, steel trusses, frames etc. can be easily lifted to required height using this type of equipment. 13. Wheel Tractor Scrapers are earth moving equipment used to provide flatten soil surface through scrapping. 14. Graders also called as motor graders are another type of equipment used in construction especially for the construction of roads. It is mainly used to level the soil surface. 15. Trenchers or Trenching machines are used to excavate trenches in soil. These trenches are generally used for pipeline laying, cable laying, drainage purposes etc. Both types of trenchers are available in tracked as well as wheeled vehicle forms. 16. Loaders are used in construction site to load the material onto dumpers, trucks etc. The materials may be excavated soil, demolition waste, raw materials, etc. A loader contain large sized bucket at its front with shorter moving arm.
Medic Trade is a leading manufacturer of high quality Biomedical and Industrial test instruments in business since 2000. Our products have established a reputation for quality, reliability and value. All Netech products are Made in the USA. Innovative products, along with excellent customer service and technical support demonstrate our unyielding commitment to the medical industry. Historically, Medic Trade has led the industry with advanced products always utilizing the newest technologies. contact us www.medic-trade.com
Medic Trade is a leading manufacturer of high quality Biomedical and Industrial test instruments in business since 2000. Our products have established a reputation for quality, reliability and value. All Netech products are Made in the USA. Innovative products, along with excellent customer service and technical support demonstrate our unyielding commitment to the medical industry. Historically, Medic Trade has led the industry with advanced products always utilizing the newest technologies. contact us
Medic Trade is a leading manufacturer of high quality Biomedical and Industrial test instruments in business since 2000. Our products have established a reputation for quality, reliability and value. All Netech products are Made in the USA. Innovative products, along with excellent customer service and technical support demonstrate our unyielding commitment to the medical industry. Historically, Medic Trade has led the industry with advanced products always utilizing the newest technologies. contact us
