Description Four cylinder, horizontally opposed engine, with liquid cooled cylinderheads, electronic fuel injection and dual ignition system, turbo charger, automatic altitude compensation, wet sump pressure lubrication Featurers 1.Liquid cooled cylinderheads, electronic fuel injection and dual ignition system. 2, the ratio of power weight is higher. 3.Extremely low failure rate. 4.Turbo charger, full take off power up to 3500 meters. Technical data: Maximum power 96 kw / 130 hp at 3000 rpm Displacement 2424 cm3 / 147.91 cub. In. Compression ratio 8 : 1 Ignition electronic engine management Fuel min. Octane 98 ron (unleaded) / avgas 100 ll Dry weight 86 kg, plus accessories Fuel consumption 255 g/kwh at wot, 240 g/kwh at part throttle Application: Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship.
DESCRIPTION Four cylinder, horizontally opposed engine, with liquid cooled cylinderheads, electronic fuel injection and dual ignition system, automatic altitude compensation, wet sump pressure lubrication FEATURERS 1.Liquid cooled cylinderheads, electronic fuel injection and dual ignition system. 2,The ratio of power weight is higher. 3.Extremely low failure rate. 4.Turbo charger,full take off power up to 3500 meters. TECHNICAL DATA: Maximum Power 118 kW / 160 HP at 3000 rpm Displacement 2424 cm3 / 147.91 cub. in. Compression ratio 8 : 1 Ignition Electronic engine management Fuel min. octane 98 RON (Unleaded) / AVGAS 100 LL Dry weight 86 kg, plus accessories Fuel consumption 255 g/kWh at WOT,240 g/kWh at part throttle. APPLICATION: Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship. OTHER INFORMATION: We can provide propellers, generators(for UAV), start-generators and other accessories.
PRODUCT OVERVIEW EPS Styrofoam CNC Router Machine for Foam Mould Milling carving 3 axis 4 axis for sale Gildemerster Styrofoam Moulding CNC Router machine is one type of CNC Router Machine which is designed for do engraving and carving job on styrofoam foam and other foam type to make mould or EPS sculptures .Machine has been designed with extra heavy duty structure ,gantry with higher power driver and motors to enable machine has bigger loading size as well as carving distance for Z axis .Normal CNC Router Machine normally has 200-300mm working size for Z axis .however ,when it comes to carving work on EPS or styrofoam for different mould or sculptures,it would be noticed that small distance between gantry and machine table could not handle the size .Styrofoam Moulding CNC Router machine had been developed under this circumstance and good to used for making statue ,sculptures and other molds and which requires high accurate carving and engraving job. Specifications : Product Name: Styrofoam Moulding CNC Router Model: MD-25F1 Carving size :1500X3000X500mm Machine body: Whole steel welded heavy duty Controller: DSP/NCstudio/LNC/Taiwan Syntec Spindle:7.5Kw-12Kw Spindle speed: 3000-18000rpm Drivers Servo motors Rails: Taiwan TBI Power transmission: X&Y rack and pinion ,Z ballscrew Working speed: 0-10000mm/min Collet: ER32/BT30/BT40 Command Language: G-code,M-code Voltage: 380V/50HZ Weight: 3800KG Applications: Gildemeister Styrofoam Moulding CNC Router machine is mainly used on EPS foam, wood material for the industry such as Casting woodmold ,Automotive ,Interior decoration ,Engineering plastic and other high precision non metal 3D carving work .Except for Styrofoam Moulding CNC Router ,Gildemeister CNC manufacture all type of CNC equipment including : CNC Router Machine ,CNC Laser Machine ,Plasma Cutting Machine ,CNC Lathe Machine ,CNC Drilling and milling machine etc .Our company has been working in the CNC filed for more than decades and gained lot of experience in machine building ,problem fixing and capable of offering good service after sell .If it happens that you have job which requires a CNC equipment no matter for wood or metal ,we would be happy to know the detail of your work request to offer you the best solution for the job as well as a reliable cnc machinefor your work .
Motorola One Vision XT1970-2 Quantities 10 to 1000 COLOUR Bronze and Saphire NETWORK Technology GSM / HSPA / LTE LAUNCH Announced 2019, May 15 Status Available. Released 2019, June 20 BODY Dimensions 160.1 x 71.2 x 8.7 mm (6.30 x 2.80 x 0.34 in) Weight 180 g (6.35 oz) Build Glass front (Gorilla Glass), glass back, plastic frame SIM Single SIM (Nano-SIM) or Hybrid Dual SIM (Nano-SIM, dual stand-by) Water-repellent coating DISPLAY Type IPS LCD Size 6.3 inches, 94.0 cm2 (~82.5% screen-to-body ratio) Resolution 1080 x 2520 pixels, 21:9 ratio (~432 ppi density) Protection Corning Gorilla Glass (unspecified version) PLATFORM OS Android 9.0 (Pie), upgradable to Android 10, Android One Chipset Exynos 9609 (10 nm) CPU Octa-core (4x2.2 GHz Cortex-A73 & 4x1.6 GHz Cortex-A53) GPU Mali-G72 MP3 MEMORY Card slot microSDXC (uses shared SIM slot) Internal 128GB 4GB RAM UFS 2.1 MAIN CAMERA Dual 48 MP, f/1.7, (wide), 1/2.0", 0.8µm, PDAF, OIS 5 MP, f/2.2, (depth) Features Dual-LED dual-tone flash, HDR, panorama Video 4K@30fps, 1080p@30/60fps SELFIE CAMERA Single 25 MP, f/2.0, 0.9µm Video 1080p@30fps SOUND Loudspeaker Yes 3.5mm jack Yes COMMS WLAN Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot Bluetooth 5.0, A2DP, LE, EDR GPS Yes, with A-GPS, GLONASS, GALILEO, BDS NFC Yes Radio FM radio USB USB Type-C 2.0, USB On-The-Go FEATURES Sensors Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass BATTERY Type Li-Po 3500 mAh, non-removable Charging Fast charging 15W MISC Colors Bronze gradient, Sapphire gradient Models XT1970-1, XT1970-2 SAR 0.34 W/kg (head) 1.45 W/kg (body) Price $659.00 / 251.00 TESTS Performance AnTuTu: 143124 (v7) GeekBench: 5425 (v4.4) GFXBench: 7.9fps (ES 3.1 onscreen) Display Contrast ratio: 1190:1 (nominal) Camera Photo / Video Loudspeaker Voice 73dB / Noise 71dB / Ring 85dB Battery life Endurance rating 67h
SPIDER is a inside profile modeling cutting machine, which is easy fixed on flat-bulb steel surface, steel angle, normal plate, and other cutting materials' surface. Cutting with graph mould. The body of SPIDER is not wide, plush it has magnet, it is suitable fo all kinds of U-bar, H-beam, steel angle, flat-bulb steel cutting holes. Control panel, control turning distance and speed and magnet switch. Movable joint, ensure whole cutting head will move with magnet wheel. High strength perpetual magnet application fixed cutting machine on surface. SPIDER Semi-Auto cutting machine main technical parameters Type SPIDER-200 SPIDER-400 Input voltage 220V single phase, 50/60Hz Cutting mode Flame cutting Cutting shape Straight cutting Cutting thickness 5-50mm Fixed mode High strength perpetual magnet Profile modeling Inside magnetism wheel Cutting speed (mm/min) 100-600 100-900 Effective cutting area 420�160mm (Φ200) 600�200mm (Φ300) Machine weight 8kg 10kg Cutting gas O2, C2H2, LPG Company Introduction Beijing TopTech Technology Co., Ltd. was founded in Beijing, the capital and main transportation city in China. With more than 10 years experience in welding and cutting industry, we had R&D our advanced welding and cutting equipment. Mature teams, included sales team, marketing team, production team and after-service team, supply professional service for customers. Strictly follow ISO 9001:2000 world quality management system.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application. Design Features: Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Ductile iron fully lined casing provides durability, strength, safety, and long service life. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs. Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life. Designed for rugged duties while offering excellent efficiencies.
Compound Cone Crusher Compound Cone Crusher, widely used in the industries of metallurgy, building material, road construction, chemical engineering & silicate, is suitable for crushing all kinds of ores and rocks with medium or above hardness. Compound Cone Crusher is divided into standard type and short-head type. Generally speaking, the standard type has big feeding granularity and relatively coarse discharging granularity, and the short-head type has steep crushing cone and small feeding granularity which is conducive to producing fine particle materials, for this reason,the standard type compound cone crusher is generally used for coarse and medium crushing and the short-headed type compound cone crusher is generally used for medium and fine crushing. Compound Cone Crusher Features: It has unique hydraulic clearing system,hydraulic opening adjusting function,easy for changing movable and fixed plate,decreasing management and maintenance cost. It is widely used for medium and fine crushing of granite,basalt,cobble,cobblestone,iron ore etc, which is well received by customers. Working Principle : Cone crusher when working, the motor drives the eccentric bearing via the spring coupling, the transmission shaft and a couple of cone gear wheels. The crushing cone axis is forced to swing by the eccentric bearing bushing, which makes the mantle sometimes close to the bowl liner, and sometimes far away from the bowl liner. The raw materials are pressed, impacted and finally crushed in the copper.
FOB Price: US $ 5 - 30 / Piece Min. Order Quantity: 100 Piece/Pieces Supply Ability: 30000 Piece/Pieces per Month Port: KEE LUNG Payment Terms: T/T The valve stem seals are easily and securely fixed in the engine by the valve spring. The seal and valve spring seat are combined into a single component. For valve stem seals, WEIANN / MATTO offers the entire line from single valve stem seals, designed of materials, to integrate valve stem seals. About WEI ANN We are a reputable engine overhaul gasket manufacturer in Taiwan area. We are committed in manufacturing the best quality products. Our main products include engine overhaul gasket sets, cylinder head gaskets, and manifold gaskets, for many models of vehicles. We have been researching & developing the engine gaskets for more than 30 years. Our factory owns a series of rigorous process of manufacturing in order to satisfy our customersâ?? requirements. Business Type: Manufacturer, Trading Company, Distributor / WholesalerMain Products: Engine Gaskets, Cylinder head gaskets, Overhaul Gasket kit, Head cover gaskets, Oil Pan gaskets ..,etc Location: Taiwan Year Established: 1994 Number Of Employees: 100 People Investment Amount: Above USD$10 Million Main Markets: South Asia, Southern Europe, Northern Europe, Central America, Western Europe Certifications: ISO9001, TS16949 Average Lead Time: 40 Day(s) Should you have any question, please donâ??t be hesitate to contact us. Our website: https://www.engine-gasket.com/ Address: B1F., NO.118, WAN-SHENG ST., WEN-SHAN, TAIPEI 11681, TAIWAN Tel: 886-2-8935-2999 Fax: 886-2-8935-2777
Product Description Sam Cylinder sensor for smt mounter equipment Long-term supply of the following Sam machine accessories 1. Sam series original brand new nozzle NOZZLE (CN030 CN040 CN040 CN140 CN220 CN400 CN400N CN750 CN110 CN1100, etc.) CP40 CP45 BELLOWS HOLDER suction nozzle 2. Sam SMT machine CP45 calibration nozzle rule (nozzle bow board) SM series correction with a nozzle (nozzle correction board) 3. Sam CP / SM series equipment motor drive, cylinder, Z-AXIS pole, 4. Sam CP / SM models fixed camera / MARK camera / flight camera CCD / mobile camera 5. Sam SM head solenoid valve: SY3140R-5LOZ. VA01PEP34A-1U, VA01PEP34B-1U 6. Sam original Feeder CP8MM 12MM 16MM 24MM 32MM 44MM 56MM FEEDER and accessories 7. Sam original Feeder SM8MM 12MM 16MM 24MM 32MM 44MM 56MM FEEDER and accessories 8. Sam CP, SM series of various models board (ADDA VME MARK3 control board laser board light control board HEAD IF board IO board BASE board H1-H4 axis control board card 9. Supply Sam CP40 vacuum generator, 10. Low-cost supply of Sam Mounter models of filters, filter cotton, tank chain, transmission belt, power cord, pin 11. Low-cost supply of Sam CP40 laser head, laser board and maintenance
Product Description smt sensor SAM PCB sensor for SAM machine Long-term supply of the following SAM machine accessories 1. SAM series original brand new nozzle NOZZLE (CN030 CN040 CN040 CN140 CN220 CN400 CN400N CN750 CN110 CN1100, etc.) CP40 CP45 BELLOWS HOLDER suction nozzle 2. SAM SMT machine CP45 calibration nozzle rule (nozzle bow board) SM series correction with a nozzle (nozzle correction board) 3. SAM CP / SM series equipment motor drive, cylinder, Z-AXIS pole, 4. SAM CP / SM models fixed camera / MARK camera / flight camera CCD / mobile camera 5. SAM SM head solenoid valve: SY3140R-5LOZ. VA01PEP34A-1U, VA01PEP34B-1U 6. SAM original Feeder CP8MM 12MM 16MM 24MM 32MM 44MM 56MM FEEDER and accessories 7. SAM original Feeder SM8MM 12MM 16MM 24MM 32MM 44MM 56MM FEEDER and accessories 8. SAM CP, SM series of various models board (ADDA VME MARK3 control board laser board light control board HEAD IF board IO board BASE board H1-H4 axis control board card 9. Supply SAM CP40 vacuum generator, 10. Low-cost supply of SAM Mounter models of filters, filter cotton, tank chain, transmission belt, power cord, pin 11. Low-cost supply of SAM CP40 laser head, laser board and maintenance
Rotary Kiln For Calcined Magnesium Production Line Rotary kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion. Cylinder as heated pivoting part, made of high-quality carbon steel plate, is supported on the support device by tyre, and there is machanical or hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder. Gearing gyrate according to process-required rotating speed by ring gear in the middle of cylinder. Because of the need of installation or maintenance, the bigger rotary kiln has auxiliary gears, which makes cylinder gyrate more slowly. To prevent cold air come in and dust overflow, the reliable kiln tail and head sealing equipment is installed on feed and discharge end. Product application: Rotary kiln is Thermal Equipment, heating materials, it is widely used in the fields of cement, Nonferrous Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making. Product feature: 1. Support device: Advanced shaft structure, automatic temperature measuring device and electrical heating, . 2. Catch wheel: Including two kinds mechanical wheel and hydraulic pressure 3. Gears: Single or double. Control the rotating speed by buncher, DE machine and frequency variable motor. Be reliable, energy-saving, and efficient. 4. Cylinder tyre bolster: Lower bolster has three types: Fixed, zoom and floating. The structure is simple, replacement is convenient and wont hurt cylinder. 5. Sealing equipment: There are many kinds for choice according to kiln models, including air cylinder edge sealing, spring edge sealing, graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And sealing effect is very good. 6. Kiln head hood: Including stationary type and flexible type.
Kaplan Turbine is suitable for medium & low water head and large flow power plants. With same water head, the Kaplan runner speed is higher than that of the Francis'. The Kaplan runner blade can be either fixed and rotatory. The key components include: Kaplan runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, Draft tube, Spiral case. Tubular Turbines are suitable to lower water head, is a kind of horizontal turbine with straight flow channel. There is no spiral case in Tubular turbine, and its blades can be fixed or rotatory. The key components include: Tubular runner, Distributor, Turbine guide bearing, Governor among other. Our Kaplan &Tubular Turbine has the features with Kaplan Turbine Design, Kaplan Turbine Advantages. Best quality and factory price will give you Application scope: Kaplan turbine Tubular Turbine Water Head: 3 ~ 80m 2 ~ 25m Output: 0.1 ~ 200MW 0.05 ~ 57MW Frequency: 50/60HZ 50/60HZ Runner Dia.: 1 ~ 11m 1 ~ 7m We also provide Casting Pelton Runner, Forged Pelton Runner, Casting Guide Vane, Francis Runner Band Heat Treatment, Pelton Turbine. Product Introduction 1. Advanced CFD, FEA technic is utilized in the designing process to ensure better technical solution 2. CAE casting simulation is adopted for the produciton of casting parts, this advanced and reliable process plan could help effectively improve product quality. 3. All raw material strictly conform to international standard, such as ASTM, IEC,ISO etc. key component such as runners, guide vane is Forged and entire CNC machined. Chemical Composition for ASTM A473 S41500 and ASTM A743 CA6NM% Material No. C Si Mn P S Cr Ni Mo ASTM A473 S41500 0.05 0.60 0.5-1.0 0.030 0.030 11.5-14.0 3.5-5.5 0.40-0.80 ASTM A743 CA6NM 0.06 Max1.0 Max1.0 0.040 0.030 11.5-14.0 3.5-4.5 0.40-1.0 Mechanical Property for ASTM A473 S41500 and ASTM A743 CA6NM Material No. ?0.2(Mpa) (Mpa) �5(%) ?(%) Akv (J/cm2) HB ASTM A473 S41500 620 795 15 45 50 295 ASTM A743 CA6NM 550 755 15 35 50 285 6.With the help of 3D Assembling, through motion simulation, the entire organization interaction can be seen at a glance. This helped a great deal for parts processing and pre-installation. 7.Each project will strictly follow manufacturying plan to ensure the delivery date. 8.ISO 9001 Quality Management system is carried out to ensure better management control Buy low price, high quality Hydraulic Turbine Generator, Hydro Turbine Runner, Water Turbine Hydro Power, 100kw Hydro Turbines, choose our productsGetai Hydropower is the leading factory & Company, Warmly welcome new and old customers to visit and patronize!
65w GaN PD3.0 fast charge Product selling point introduction: 1.Gallium nitride black techno logy , third-ge neration semi conductor material , Efficient,Low loss,delicate and easy to carry 2.The 3-in-1 fast charger,all ports can be charged quick helps you solve the messy plug safety risks, and fixes the large and heavy charging head that makes travel inconvenient 3.Broad compatibility,65w high power output,support full fast charge protocol,both laptops and mobile phones can be charged quickly,fully charge the 13-inch notebook in 1.5 hours 4.Support Apple fast charge,50% full in 30 minutes,support PD fast charge protocol,don t worry about low battery 5.Impact resistance PC materialHard shell not easy to damage 6.Provide UK/US/EU 3 specifications plugs, American plugs can be folded
65w GaN PD3.0 fast charge Product selling point introduction: 1.Gallium nitride black techno logy , third-ge neration semi conductor material , Efficient,Low loss,delicate and easy to carry 2.The 3-in-1 fast charger,all ports can be charged quick helps you solve the messy plug safety risks, and fixes the large and heavy charging head that makes travel inconvenient 3.Broad compatibility,65w high power output,support full fast charge protocol,both laptops and mobile phones can be charged quickly,fully charge the 13-inch notebook in 1.5 hours 4.Support Apple fast charge,50% full in 30 minutes,support PD fast charge protocol,don t worry about low battery 5.Impact resistance PC materialHard shell not easy to damage 6.Provide UK/US/EU 3 specifications plugs, American plugs can be folded
65w GaN PD3.0 fast charge Product selling point introduction: 1.Gallium nitride black techno logy , third-ge neration semi conductor material , Efficient,Low loss,delicate and easy to carry 2.The 3-in-1 fast charger,all ports can be charged quick helps you solve the messy plug safety risks, and fixes the large and heavy charging head that makes travel inconvenient 3.Broad compatibility,65w high power output,support full fast charge protocol,both laptops and mobile phones can be charged quickly,fully charge the 13-inch notebook in 1.5 hours 4.Support Apple fast charge,50% full in 30 minutes,support PD fast charge protocol,don t worry about low battery 5.Impact resistance PC materialHard shell not easy to damage 6.Provide UK/US/EU 3 specifications plugs, American plugs can be folded
The hoist motor is class F insulated, 30 minute rated (40% effective duty), thermally protected and totally enclosed. The trolley motor's standard inverter control offers two-speed multi-step or infinitely variable speed control for smooth acceleration and deceleration, minimal load swing, fast, efficient handling and accurate load placement. Characteristic Hoist Classification : FEM(2m) / ISO(M5) Safety Working Load : 125% Capacity : 1ton ~70ton Various Type : Fixed, Mono-rail, Double rail, Low Head, Main/Aux Type Speed Type : Single, wo Speed Power Supply : AC Three phases power source220/380/415/440/480V ~50/60hz 3ph Ambient Temperature : -20c~+40c Utilization Factor(%ED) : 40%ED Coating Color : Munsell No. for hoist body - Mussel No. 10B 3/5 Button Block - Mussel No. 8.1YR 7.6/15.2 Hook - Mussel No. 8.1YR 7.6/15.2 Trolley - Mussel No.10B 3/5
Manufacturing & supply of W â??Beam Metal Crash Barrier Single side Single Beam Guard rail comprising of 2.7 mm cold rolled section having minimum yield strength 2400 kg / sqcm having width of 312 mm and depth of corrugation as 83 mm with hot dip galvanized of zinc coating@ 550 g/sqm having total length 4.318 M (effective length 4M) generally as per MORTH specification. (THICKNESS 2.7 MM) The Post channel made of Hot rolled section having minimum yield strength 2400 kg / sqcm. The post will be hot dip galvanized of zinc coating@ 550g/sqcm having size of 150mm x 75 mm x 4.7 mm thick x 1800 mm long. The Spacer channel made of Hot rolled section having minimum yield strength 2400 kg /sqcm. The post will be hot dip galvanized of zinc coating@ 550g/sqcm having size of 150mm x 75mm x 4.7mm thick and 330mm long. Along With the required button Head Bolts & Hexagonal Bolts for fixing. (As Per IS 1367 & 1364)
Micro Coolant Liquid Transfer Peristaltic Pump This OEM Peristaltic Pump can work with AC220V synchronous motor 1.The TH15 Peristaltic Dosing Pumps have superb features built-in and flexible design to meet specific customer needs. 2.Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM Small Peristaltic Pump a good performance. Application: Environmental Protection Equipment,Discharge of flue gas analyzer,Delivery liquid into the fermentation tank Basic Peristaltic Pump Functions and features *A special part links the roller box with the motor shaft to ensures stable *Snaps into the tube, not slippery silk, more fixture *Crust use streamlined design, With card bit, easily snaps into the Peristaltic Liquid Pump . Easy to change and fix the tubing. Occlusion can be adjusted slightly by ratchet wheel. * Small size, compact and robust design * Trouble-free continuous tube loading in seconds * Reliable performance without any operator adjustments * Safe and closed with visible rotor movement * Spring-loaded operation for good pressure control * 2 roller pump head, low pulsation * Smooth, cog-free operation Noted:Run clockwise can get large flow,and operation counterclockwise can get biger outlet pressure. Load import tube or harder tube,please counterclockwise operation to increase the pressure tube torque.
1. Zero gravity design, armrest linkage capsule, let you experience the weightlessness of space; 2. Intelligent fixed-point massage, self-adaptive massage head from neck to foot fits human body; 3. Whole body air bag package squeeze massage, enjoy rhythmic massage; 4.The foot roller scraping massage stimulates the sole of the foot; 5 A variety of automatic massage procedures, a variety of artificial massage techniques; 6 Warm feeling hot compress, enjoy intimate heating massage; 7 The mobile chair is equipped with massage wheel anywhere; 8 The mode can be changed by remote control, and the operation is simple and convenient; 9 HiFi stereo surround sound is designed to enjoy Bluetooth link; 10 Wear resistant, comfortable and breathable leather with humanized roller design; 11 The product adopts breathing lamp design, which is more atmospheric and more beautiful Carton Size:123*75*105cm PCS/CTN: 1pcs N/W-G/W: 60kg-70kg 1x20`GP:28pcs; 1x40'GP:60pcs; 1x40'HQ: 60pcs. Technical Parameter: Rated Voltage: AC100-120V. or 220-240V; 50Hz./60Hz; Rated Power: 120W. Rated operating time: 15mins. Incline Range: 95-175 degree.
NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Description Alphasense Nitrogen Dioxide gas sensors operate using proven fuel cell technology. NO2-A1 Nitrogen Dioxide Sensor size: 20mm diameter, the industry standard size for portable gas detectors The NO2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 50 parts per billion (ppb) and an operating range to 20ppm. The sensors are suitable for use in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers. The NO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Specifications * Range: 20 ppm NO2 limit of performance warranty * Sensitivity: -250 to -650 nA/ppm in 10ppm NO2 * Response time t90: < 50 (s) from zero to 10ppm NO2 * Resolution: < 0.02 RMS noise (ppm equivalent) * Temperature range : -20 to 50 deg C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 % rh continuous * Weight: < 6 g
