The pouring system is composed of a gate cup, a straight gate, a horizontal gate, and an inner gate. It is a channel opened inside the mold to introduce liquid metal into the mold cavity. The function of the pouring system is to control the speed of metal liquid filling the mold and the time required to fill the mold; Ensure that the metal liquid enters the mold smoothly, avoiding turbulence and erosion of the mold; Prevent slag and other inclusions from entering the mold cavity; During pouring, do not involve gas and try to ensure that the casting cools down in accordance with the principle of sequential solidification. The pouring system includes: 1. Pouring cup. The metal liquid poured into the ladle, also known as the external gate 2. Straight gate. Connect the outer gate and the transverse gate to introduce molten metal from the outside of the mold into the inside of the mold 3. Horizontal gate. Connect the straight gate and distribute the metal flow from the straight gate. 4. Inner gate. Connect the transverse gate and inject molten metal into the mold cavity. The function of the pouring cup is to guide the liquid metal poured from the ladle into the straight gate. The gate cup of small castings is mostly funnel-shaped, and the diameter of the upper gate should be more than twice that of the straight gate, and it is generally made directly on the mold during molding.
Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impelle
Lead pot cover The cover plate is composed of 10mm thick steel plates 5) Furnace insulation cover (movable): outer layer 6mm, inner layer 60mm Heat insulation (the furnace insulation cover is formed by one-time stamping, Manual lifting, capable of 360 degree rotation)
gating system The pouring system is composed of a gate cup, a straight gate, a horizontal gate, and an inner gate. It is a channel opened inside the mold to introduce liquid metal into the mold cavity. The function of the pouring system is to control the speed of metal liquid filling the mold and the time required to fill the mold; Ensure that the metal liquid enters the mold smoothly, avoiding turbulence and erosion of the mold; Prevent slag and other inclusions from entering the mold cavity; During pouring, do not involve gas and try to ensure that the casting cools down in accordance with the principle of sequential solidification. The pouring system includes: 1. Pouring cup. The metal liquid poured into the ladle, also known as the external gate 2. Straight gate. Connect the outer gate and the transverse gate to introduce molten metal from the outside of the mold into the inside of the mold 3. Horizontal gate. Connect the straight gate and distribute the metal flow from the straight gate. 4. Inner gate. Connect the transverse gate and inject molten metal into the mold cavity. The function of the pouring cup is to guide the liquid metal poured from the ladle into the straight gate. The gate cup of small castings is mostly funnel-shaped, and the diameter of the upper gate should be more than twice that of the straight gate, and it is generally made directly on the mold during molding.
Slag casting machine The slag casting machine is used for casting copper slag or lead slag. Copper slag is mainly used for casting converter slag, and lead slag is mainly high lead slag discharged from the casting oxidation furnace. Workflow: After the slag flows out of the furnace, it flows into the slag mold of the slag casting machine through a chute from the casting point. The slag mold is fixed on the chain conveyor, and the slag inside the slag mold is gradually transported from the casting point to the slag ingot outlet through the air and water cooling areas by the chain conveyor on the slag casting machine, and then discharged.
Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impeller
Lead liquid mixer During the impurity removal process of crude lead refining, it is necessary to put the refining auxiliary materials into a lead pot containing liquid lead liquid, and use a mixer to stir the lead liquid to promote contact between the auxiliary materials and the lead liquid. The conventional stirring method is to install vertical blades at the bottom of the stirring shaft, and place the stirring shaft at the center of the lead pot for stirring.
This equipment is widely used in manufacturers of aluminum alloy ingots and zinc alloy ingots. It has the characteristics of automatic aluminum water distribution, adjustable casting speed, automatic ingot tapping and demolding, high production efficiency, uniform aluminum ingot weight, no large or small ends, and smooth surface. The casting process has a high degree of automation and low labor intensity. The casting mold is made of ductile iron, with a long service life
Grade900 Series Place of OriginShandong China Model NumberSteel Bar TypeRound Application construction Machined components ShapeRound Special UseValve Steels Tolerance1 1 Processing ServiceBending Welding Decoiling Punching Cutting Steel Grade301L S30815 301 304N 310S S32305 410
304/316/310/210/410 Stainless steel Pipe Type:Seamless/Welded Steel Grade:300 Series, 301L, 301, 310S, 410, 316L, 316, 410L, 301L, S30815, 301, 304N, 310S, S32305, 410, 204C3, 316Ti, 316L, 441, 316, L4, 420J1, 321, 410S, 410L, 436L, 443, LH, L1, S32304, 314, 347, 430, 309S, 304, 439, 204C2, 425M, 409L, 420J2, 436, 445, 304L, 405, 370, S32101, 904L, 444, 301LN, 305, 429, 304J1, 317L Application:indoor/outdoor gas system Welding Line Type:Seamless Outer Diameter:22mm Tolerance:�±1% Processing Service:Bending, Welding, Decoiling, Punching, Cutting, Moulding Grade:
Rotary tilting refining furnace The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace. The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal. When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent ( graphite) to the furnace material.
The material is Q245R boiler steel plate (=25mm), and the bottom of lead kettle is hemispherical body. Lead pump is used to transport from refining kettle to alloy configuration kettle. Chemical composition and mechanical property of Q245R
ICUMSA 45 SUGAR FOR SALE Origin: Brazil ð??§ð??· We have quotas for sugar IC 45/IC100/IC 150/S-30 CRYSTAL SUGAR/IC â?ª600-1200â?¬ VHP Payment: We accept SBLC/LC/DLC from top 25 banks and/or T/T.
The copper and aluminum radiator crushing production line is widely used in the dismantling industry, waste material recycling and other fields, making positive contributions to environmental protection and resource reuse. The copper and aluminum radiator crushing production line has become an ideal choice for dismantling and recycling scrap copper and aluminum radiators due to its characteristics of efficient separation, low metal loss, environmental protection and energy saving, high degree of automation and strong equipment stability.
Pleated micron membrane filter cartridge, filter cartridge housings, pp melt blown filter cartridge, wire wound filter cartridge, carbon fiber filter cartridge, titanium rod filter cartridge and filter bag.
pp jumbo or bag or film recycle scrap regrind.
Carbon anode butts carbon anode scrap..
Stationery, shoes, glass scrap, hardware, sports, furniture.
Mobile, Computer, TV Board Scrap Sell..
Textile Scrap, Waste, Rejected Issued And Used Clothes..