The Pall HNP fluid conditioning purifier removes 100% of free water and as much as 80% of dissolved water. It also removes 100% of free and entrained gases and up to 80% of dissolved gases. Particulate removal is achieved using a high beta rated (5(c)=1000) Ultipor III filter element to polish the fluid before discharge back to the system reservoir.Other replacement filter media grades are also available to suit application requirements. Replacement HNP series oil purifier is designed to filtering oil by remove water,air and dirty. Oil oxidation,Lubrication performance loss and aeration influence directly on reliability of system and service life of system component and oil. The HNP can be moved from one system to another or left as a permanent installation. The HNP purifier is simply connected to an electric supply, the inlet valve opened and reset and start buttons pressed to start the fluid purifying process. Automatic controls, integral to the unit, constantly monitor the operation and will safely shut down the system if fluid levels and pressures are outside normal limits. Model HNP006 HNP021 HNP073 HNP200 Flow rate (L/min) 10 20 70 229 Inlet pressure(bar) 10 -0.4~0.4 -0.4~3 -0.4~3 Outlet Max pressure(bar) 10 7 7 8 Normal work vacuum(bar) -0.6 0.9 Inlet size G1 1/4 G1 G2 G4 Outlet size G1 G1 G1 1/2 G3 Motor power(KW) 0.67 2.25 6.4 22.7 Oil type Hydraulic oil,lube oil,turbine oil Peak viscosity(cSt) 700 Temperature Range( ) 10~70 Net Weight(Kg) 75 180 450 (600 with heater) 1760 Size L(mm) 695 1090 1580 2679 W(mm) 455 620 680(1170 with heater) 1662 H(mm) 1041 Movable 1040 1880 (2113 With heater) 3266 Fixed 1020 1780 Dehydration Free water Remove 100% Dissolved water Remove90% Remove 80% Remove 90% Deaeration Free gas Remove 100% Dissolved gas Remove 80% No. Flow rate(L/min) 006 10 021 20 073 70 200 229 No. Voltage M 220V 1PH R 380V 1PH T 415V 3PH No. Frequency(Hz) 3 50Hz 3PH 4 60Hz 3PH 5 50Hz 1PH
Liquid nitrogen tanks can be divided into two types according to cell storage modes, gas phase and liquid phase storage modes; In the gas phase, samples are stored in volatile nitrogen; in the liquid phase, samples are directly immersed in liquid nitrogen for low-temperature preservation; However, due to different capacities, not all cells can be stored in gas-phase storage mode. Only cells with more than 10,000 cells can use gas-phase liquid nitrogen tanks. If there are more than a thousand cells and need to be preserved in the gas phase, how can this be achieved? You can choose the cryobank series liquid nitrogen tank, which is specially designed for a small amount of cells that require gas phase storage. It has the storage mode of the YDD series and the conventional capacity of the YDS series. It can be regarded as a mini version of the YDD stem cell liquid nitrogen tank or the YDS series liquid nitrogen tank. An upgraded version of the nitrogen tank. The following are the features of cryobank series liquid nitrogen tanks: 1. 4 models, namely 65 liters, 95 liters, 145 liters and 175 liters, supporting the storage of 2400, 3600, 4800 and 6000 2ml cryovials; 2. Each model is equipped with 6 square buckets for storing freezing boxes and freezing tubes; 3. There are two storage modes: gas phase and liquid phase. When storing in gas phase, the temperature at the top of the tank can reach below -190�°C; therefore, it can be called a small gas-liquid-phase liquid nitrogen tank, a small gas-phase tank, and a small low-temperature biobank; 4. Comes with a liquid level sensor that can monitor the liquid level in the tank in real time, which is safe and reliable; 5. Intelligent control display system, real-time monitoring of internal temperature and liquid nitrogen consumption; 6. Vacuum insulation structure and hot gas bypass design ensure uniform and stable internal temperature; 7. It is adapted to the self-pressurizing liquid nitrogen tank and has automatic replenishing function, which is convenient and fast, saving manpower; 8. Supports remote alarm (voice/SMS/WeChat, etc.), and has intelligent local and cloud data backup and export functions. In addition, the small gas-liquid phase liquid nitrogen tank also has the same one-click defogging as the YDD biological sample library, which helps users quickly locate cells and reduces the loss of liquid nitrogen caused by opening the lid. If you have any needs, please contact KGSQ liquid nitrogen tank:
Respirable Dust Sampler The practise of assessing contaminants in the amount of air that can be inhaled by employees at a certain location is known as espirable dust sampling. To ensure that workers' health is not in danger, a variety of dust sampling techniques are employed to measure the amount of dust particles and chemical vapours. With industrial employees who are frequently exposed to vapours, gases, and particles, respirable air sampling is fairly common. By monitoring the air, hazardous substances that are still present in the atmosphere can be found and effectively controlled. Product Description FDS (2.5 / 10) made by KDM PM TRAVELING FINE DUST SAMPLER (Can Monitor Either PM 2.5 OR PM 10 at a time) Model-based on a microprocessor (DATA LOGGER FOR ALL 5 PARAMETERS) Developed in accordance with international standards, USEPA regulations, and Indian CPCB guidelines PM EPA 2.5 Size Separator PM 2.5 SUCCESS EPA Impactor PM 10 Size Separator Using a 10 separation assembly and a sample transfer tube, the omnidirectional ambient particle inlet. Filter Cassette with a 47 mm Filter Media is placed in a Filter Holder assembly. Volume Totalizer & Flow Rate Meter (USEPA Procedure Followed) Actual operating conditions are shown as Flow in LPM on a Digital Display with a Resolution of 0.01 LPM. Throughout the sampling period, the flow rate was kept constant at 16.67 LPM with a 2% accuracy thanks to a microprocessor-based digital flow controller. Timer/Clock System Programmable Real-time control system with automatic start and stop, digital time and date display, and sampling time display. Precision 2 min/month. Temperature Sensors For Filter Temperature Range & Ambient Temperature Range: 5 to 50 C with a 0.10 C resolution. Range of the bar press sensor is 600 to 800 mm Hg. 1 mm Hg as the resolution Display 20x4 LCD display calibrated by FCRI PALLAKKED presenting parameters in real time, i.e. Flow Rate (16.67 LPM). Volumetric flow, barometric pressure, ambient temperature, and filter temperature output are all included. USB Flash Drive with RS-232C terminal for connecting to a computer (Optional) Dimensions and Weight of Calibration Factory Calibration Certificate: (17x13x19)/Approx. 25 Kg
Can you clean the TV screen with Melamine Foam Sponge Magic erasers are great cleaning tools for TV screens, but they can be quite abrasive. To ensure that you don t hurt your screen, you should use a soft cloth or a microfiber cloth when cleaning. This will remove any dirt, dust, or oils without hurting the screen. To prevent permanent damage to your television screen, you should follow the cleaning directives included with the television. Some cleaning liquids can damage the display and may even void your warranty. If you re unsure, consult your owner s manual. The Good Housekeeping Institute and Media and Tech Labs have developed a list of safe cleaning products and methods. The manuals can be downloaded in PDF format. Never apply excessive pressure when scrubber a television screen. Excess pressure may damage the protective coating on the screen and cause it to crack or break. Also, excessive pressure can lead to damage to your TV, LCD monitor, or laptop screen. It may even damage pixels on the screen. So, it is best to follow the recommended cleaning instructions. You won t ruin your expensive investment by trying this method. To clean a TV screen with a topeco-clean melamine sponge, make sure to turn the TV off before attempting this. If the screen is covered in crayons, use rubbing alcohol to the crayon marks. When the TV has completely dried, wipe it with a soft cloth to restore its shine. If you can t remove the crayon marks, you can use a microfiber cloth or soft cloth. If you are unsure of the best way to clean a television screen with a magic eraser, you should perform a test on a hidden area before using it on your screen. If you have the patience and persistence to test your cleaning product, you can be sure that your television screen will be clean. If it doesn t come out clean, try using a sanitized cloth and cleaning liquid. After the cleaning solution has dried, dry the microfiber magic sponge cloth and wipe it gently to remove any residue. Make sure to use a soft cloth to avoid scratching the screen. You should avoid using paper towels or tissues because they contain fibers that can damage the screen. A microfiber cloth is a safer alternative and will not leave any residue behind. You should also avoid using paper towels to wipe the screen, as they can cause scratches and leave behind a residue. If there are greasy smudges on the screen, you may want to use a damp cloth. Using water directly on the cloth will remove the greasy residue. But be sure to work carefully and in a circular motion. When using the magic sponge cleaning pad, you should remember to wear protective gloves while cleaning. The material is prone to rubbing on sensitive skin, so it s best to wear rubber gloves to protect your hands. Always use the eraser with utmost care. Avoid excessive pressure when cleaning your television screen. If you use too much pressure, you could damage your TV screen and even remove paint from your wall.
ZK disposable sterile surgical pack is a material widely used in hospital surgery. it is made up of large hole single, surgical single, cloth, surgical gown, hole towel, medium single, rubber gloves etc which can effectively block liquid and bacterial penetration and prevents cross infection. The specific composition can be selected and configured according to the requirements of users. Product Description: Product Specification Product name- Disposable sterile surgical packs Type- Medical materials & accessories Material- SMS, SMMS etc Physical test- Hydro-static pressure test & tensile test Application- Surgery and operation room Color- Blue/White MOQ- 3000 packs Packaging- EO sterile package, 1 pack/bag, 6 packs/carton or customized Carton Size- 50*40*30cm Storage condition- Dry and cool area, avoid direct sunlight Expiry date- 2 years Certification- CE/ISO13485 Production ability- 200,000 packs per month Delivery time- 20-35 days workdays after receipt of 100% payment Payment- T/T Product Details: Fitting Name Size(cm) Quantity Material Hand tower 40*40cm 2 Spun-lace Side drape, with adhesive 75*75cm 2 SMS Side drape, with adhesive 150*175cm 1 SMS Instrument table cover 150*200cm 1 PE+PP U-split drape 100*150cm 1 SMS Reinforced surgical gown L 2 SMS+PP Wrapping cloth 100*100cm 1 PP+PE Product Feature: You can find the advanced features of our key configurations as follows: 1. Split sheet drape :Creating a sterile surface on the skin which acts as a barrier to prevent skin flowing to the incision site. Provide double protection for surgery part. 2. Side drape: Prevents cross-infection between the operation part and patients when covering the patient. 3. Instrument table cover: Parcels the accessories in an operating instrument pack, or as a table cover on which the medical instruments arranged when taken out from the pack. 4. Reinforced gown:Worn with high protectiveness, which can prevent the penetration of liquid, such as blood, alcohol and grease. 5. Op tape: Used to fix the ducts and drapes during surgical procedures. Please check advantages of this pack as follows: 1. Soft and comfortable,eco-friendly and breathable. 2. Good strength and elongation, convenience and effective. 3. Avoid wasting and reduce the procedure including disinfection soaking,washing and drying,cumbersome links and so on. 4. Resist particle, fluid, alcohol, blood, bacteria and virus invading.
The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.
Transformer Oils are electrical insulating oils produced by distillation of virgin paraffinic and naphthenic crude oils followed by modern technologies involving high pressure hydrogenation and hydro-treatment. All the processes are monitored closely and appropriate Base Oil fractions are selected for further processing. Further processing involves removal of moisture and polar impurities to obtain good electrical properties. The technologies result in products with very low pour point, excellent oxidation stability, cooling characteristics and electrical properties. These properties make them suitable for the most demanding transformer applications. Applications: The transformer oils are used in Distribution & Power Transformers, Switchgears and Circuit Breakers. Products Offered: Transol HGX is an inhibited grade of transformer oil specifically tailored for demanding applications in EHV and UHV Transformers. Transol GE IEC60296:2012 Uninhibited is an uninhibited oil which is designed to meet Specifications as per IEC 60296:2012. Transol GA & GAX grades are offered meeting the specifications of ASTM D3487 Type I & II respectively. Characteristics: The products fully meet the international and national specifications such as IS-335 2018 TYPE I & II { U & I }, IEC 60296, ASTM D 3487, BS 148, JIS, AS, ASTM. The inhibited grades have DBPC as additive, which is part of the approved list of inhibitors as per IEC 60296. The products are strictly free from PCB, DBDS or any passivator or metal de-activator. They offer excellent oxidation stability with very low acid and sludge formation when tested according to IEC 61125 and ASTM D2440 besides having excellent dielectric strength, resistivity & dissipation factor. The low pour point and low viscosity characteristics of the product enable excellent cooling properties.
VFD Panel By KDM Global A variable frequency drive is known as a VFD. These panels are mostly used to regulate the feed pumps and electric motor speeds in various industrial facilities. Every motor has a different frequency and voltage, thus each one needs its own control panel to monitor and regulate them. Motor control and circuit protection devices are combined in an enclosure by a VFD control panel. Also, this control panel offers these gadgets defence against moisture, rust, dust, and other harmful elements. Heavy duty motors frequently have their speed controlled using VFD Panels, also known as variable frequency drives. Their primary duty is to control the motor or pump's speed.To satisfy the various demands of the industry, we are providing our product line in a variety of specifications. We have employed cutting-edge technology to manufacture Electrical VFD panels, relying on our creative approach. To assure sturdy construction, our skilled team manufactured our products using graded raw materials. They are built with great strength so they can survive demanding operating situations. As reliable VFD Control Panel producers, manufacturers, and exporters, we are supplying our goods to markets across the world. Those who are looking for top-notch goods at affordable prices should submit us product-related inquiries. Features: Outstanding performance; Superb quality; Reasonably priced; Prompt delivery; VFD Panel: What Is It? It's a good idea to have a backup plan in case something goes wrong. It transforms fundamentally fixed frequency and voltage into variable possibilities to regulate the motor's speed in accordance with the demands of the process. Use of VFD Panels Has Several Advantages: Better process control is guaranteed, and installation and maintenance costs are less expensive than you might expect. No need to purchase a separate controller is required Process temperature, pressure, or flow can be controlled
30 ton forklift is a heavy duty diesel forklift with fork positioner, which is widely used in ports, warehouses and logistics transit centers for handling containers and heavy products. Vicgordan's 30 ton forklift has been designed and manufactured using the latest ergonomic technologies and concepts. This 30 ton forklift has a low cost of ownership, excellent visibility, unmatched productivity, safety and ergonomics for operators in the harshest environments. The instrument show all information about the forklift;it will sound alert when low brake pressure or non-lease parking brake. Every details is well-designed to guarantee the comfortability and safety. It is ergonomically designed. The combined effectiveness of control, monitor, aeration and chair improve the working efficiency for the operator. All direction has excellent vision. The right mast can be chosen from our variety of series. 2-stage (with or without free lift) and 3-stages (with free lift) are available The design of easy-maintenance point, make the inspection and service more convenient and easy. Centralized control stick is with excellent inching performance, easy to realize millimeter-scale accurate control. Through advanced FEA, kinematics and dynamics Simulation analysis and calculation, with accurate data support design base, Guarantee the rationality and excellent performance for mast and chassis structure. The overall unit is high reliability and stability. The overall unit adopts the lightweight design, with excellent fuel consumption savings.
Advantages 1.Replacing human operate 2.12000PCS/H of Insertion rate 3. Easy to operate, stable, reliable 4. Flexible deployment 5. Low maintenance cost Application 1. Power adapter industry 2. Energy saving lamp industry 3. Home appliance industry 4. Medical control board industry 5.Other electronics industry Introduction: IST-M4000 pin-plug machine automatically inserts various pin in bulk or tape components into the PCB according to the set program. Assure you the steady performance, high density and more perfect. Application software bases on windows XP operating system, user friendly interface, bring you better quality and higher efficiency. Specificationï¼? Insertion rate 12000 PCS/H Insert direction 0°,90° PCB board size 350*280mm(Max) Non-performing rate Less then 500PPM PCB board thickness 0.79-2.36mm Components specification Max body height 20mm, max body diameter 10mm Components types Various pin in bulk or tape, customize Number of plug-in header 1-4, can be used for different specifications of the pin Machine Size (L Ã? W Ã?H) 1220mm*1000mm*1600mm Machine Weight(kg) 1300KG Power supply 220V AC (single phase) 50/60HZï¼?1.2.KVA Air pressure/consumption 0.4-0.6Mpa,0.2ã?¡/minute Ambient temperature 5-25â?? Machine noise 50db Coordinate correction Machine vision systems, multiple-point MARK vision correction Driving system AC Servo /AC motors Data input USB interface input (EXCEL format) Control System English version interface (WINDOWS system control platform)LCD monitor Worktable rotation Left-right or right -left PCB transfer mode Auto/ Manual
JHL85 8.5 Ton Wheel Excavator Introduction of JHL85 8.5 Ton Wheel Excavator JHL85 8.5 Ton Wheel Excavator Operating Environment · All-round expansion of the field of view, to increase the front and side windows and the rear window to ensure the vision, greatly reducing the dead zone, the operation more safe and efficient. · Increasing day window to improve upward visibility and increase ventilation. Doors and windows with tempered glass to prevent the visor to direct sunlight; ?¢ All operational control theory according to ergonomic design and layout. · Operating handle easily and easy to control. · Deluxe cab package, liquid crystal display panels, luxury seats. · Installation of air conditioning, indoor warm air to ensure rapid heating, cooling Intelligent operation and display · Large screen multi-function LCD monitor, digital display, full control of the engine operation (speed, water temperature, oil pressure, etc.), all kinds of machine operating information at any time. · Focus function switch on the control panel is arranged, through point-touch buttons and easy selection. * Using GPS satellite positioning system, remote diagnostics, fault warning, maintenance, automatic reminders. Convenient, fast repair and maintenance · Oil filter, pilot filter, fuel filter, oil-water separators can be disposed on the ground then check replace place. · Large-capacity fuel tank, to achieve a long job. * Large toolbox, storage is more conducive to spare items. · Repair and maintenance cycle longer: selection of high-quality parts, extended service life, reducing machine maintenance time.
Integral Dental Unit(DTK-898) Water tubes and suction tubes are from USA,air and water system is control by Italy valves Suspension Type design, optimal comfort when adjust the chair position Spittoon and assistant system, which are positioned by intelligent remote control, makes it much simpler for patient to spit and effective for doctor to operate equipment Intelligent LCD display screen and touch control panel with 12 position memorize Aluminum base for the backrest and strong steel base for the chair, strong enough for heavy patients Denmark "Linak" Electric Motor LED Sensor Operation Lamp STANDRAD CONFIGURATION Dentist stool DTK-010, same color with dental chair: 1 set Imported(4-hole) high-speed air turbine handpiece tie-in 2 sets Imported(4-hole) low-speed air turbine handpiece tie-in: 1 set Three-way syringe(cold and hot): 1 set each Built-in clean and disinfection system for water pipe in machine X-film viewer(DC/Low voltage) Super sensor operation lamp 1 set Water supply control system for cup filler and bowl rinse 1 set Handpieces water purified and air purified system 1 set Back position with negative angle compensation function Foot controller 1 set Dental stool 1 set SPECIFICATIONS: Power supply voltage------------AC220V,50Hz Air source presssure------------ï¼?0.55Mpa Water source pressure-----------0.2Mpa-0.4Mpa Optional: Scaler Camera and monitor NSK hand piece Air Compressor Central suction machine Intra Oral Camera
1) Product Name : auto double shafts pvc tape cutting machine Function: This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting. Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material. You can cut different sizes according to different material. 2) Main Technical Parameters: 1. Valid width:1.3M/ 1.6M 2. Max cutting diameter: 200mm 3. Min cutting:200mm 4. I.D of paper core:25-76.2mm 5. Blade diameter: 200mm/250mm 6. Air pressure: 6kg/Cm2 7. Power:10 HP 8. Voltage : 3 phase 380V/50HZ as customized 3) Advantage 1. Economical machine 2. High working speed 3. Less labor need FEATURES : 1. AC motor with frequency inverter.Make sure the steady cutting speed. 2. Big size color LCD touched panel with English language.You can set up various cutting mode and monitor the cutting job directly in it. 3. The PLC programmable controller.You can cutting various sizes in same log roll. 4. Mitsubishi servo motor and high accuracy ball screw and linear slide rail.To make sure the accurate cutting size. 5. Mitsubishi servo motor and hydraulic motor for optional. It can be anthropomorphized as three-step feeding speed of the cutter. To improve cutting efficiency and get best quality. 6. Mitsubishi servo motor control.To calculate the blade angle, according to different type materials. No need change blade. (angle range: + / -8 ° ) . That will increase the production efficiency.
Main raw materials:clay, shale Henan zhengzhou mining machinery co., ltd has started the light expanded clay aggregate (leca) equipment manufacturing since company foundation. We always trance the new technology developing on the leca equipment manufacturing and have cooperate with the college and r&d institute to improve the equipment performance and function. Our leca equipment have been widely used in chinese leca manufactures and won the good reputation from customers. We have begun the exported business since 2010 and create the good economic benefit. We adopt the energy saved technology and get the good efficiency. Our advantage 1. Energy-saving environment friendly Advanced production process and large capacity for single production line with low heat loss. The advanced bag type dust collector, which is equipped in leca equipment, keeps exhaust gas below 30mg/nm3. 2. High degree of automation Leca production line is fitted with temperature and pressure monitoring instrumentation, operating parameters of the computer display, and is capable of using advanced computer control to achieve automatic operation of the entire system. 3. Saving investment Based on the features of light expanded clay aggregate (leca), double-cylinder insert type rotary kiln controls the preheating and calcination process. The energy-saving vertical preheater is equipped in leca production line with advanced process, and reasonable design and high level technology. Production technology Light expanded clay aggregate production line, when the raw material is clay or slurry, the production flow chart shall be consist of raw material process, mixing, granulating, insert type rotary kiln burning process, cooling process, screening and bag packing. When the raw material is shale, the production flow chart shall be consist of crushing, screening, single rotary kiln burning process, cooling process, screening and bag packing. The fuel could be coal, nature gas, biomass fuel.
Rigid endless passenger elevation (man-riding) hoist designed to be used with unlimited rope lengths for lifting and lowering personnel. Capacities range from 400kg to 1000kg at either 9 or 18 m/min. The rigid ltd-p series unlimited cable (wire rope) passenger lifting hoist is the nearest alternative available in the market place to the tractel tirak xp series manriding hoists. The new rigid ltd-p series endless hoist is versatile and suitable for unlimited applications. The rope is not connected which makes it compact, lightweight and very easy to handle. The unrestricted wire rope lengths capability of the rigid ltd-p series makes it possible to utilise unlimited lifting heights and traction lengths. Features and benefits 1.The robust, precisely machined housing of die-cast aluminium, ensures a low dead-weight and outstanding rigidity. 2. Gearing and drive sheave is fabricated from hardened steel. 3. Universal attachment of the winches is capable by means of a central 16mm load pin, or two m10 screws. 4. Motor protection: protected to ip55 as standard. 5. Standard ltd-p series operating voltage: 380v, 3ph, 50hz (voltage and frequency are available upon request). 6. Control voltage: 24v for mobile application units and 42v for the stationary applications models. 7. Phase monitoring: as standard on mobile application models, not available on stationary units. 8. Hoist motor, as standard is fitted with a thermal overload protection device. 9. Certification: certified by and independent inspection institute (tuv). 10. Drive sheave and pressure rollers of special nitrided steel with a surface hardness of approximately 70 hrc, guaranteeing low wear of these components. 11. The fully-synthetic special oil ensures highest possible efficiency for quiet running characteristics, in a temperature range of -40°c to 70°c. 12. Standardised components ensures easy access to all wearing parts.
Rigid endless passenger elevation (man-riding) hoist designed to be used with unlimited rope lengths for lifting and lowering personnel. Capacities range from 400kg to 1000kg at either 9 or 18 m/min. The Rigid LTD-P Series unlimited cable (wire rope) passenger lifting hoist is the nearest alternative available in the market place to the Tractel Tirak XP Series manriding hoists. The new Rigid LTD-P Series endless hoist is versatile and suitable for unlimited applications. The rope is not connected which makes it compact, lightweight and very easy to handle. The unrestricted wire rope lengths capability of the Rigid LTD-P Series makes it possible to utilise unlimited lifting heights and traction lengths. Features and Benefits 1.The robust, precisely machined housing of die-cast aluminium, ensures a low dead-weight and outstanding rigidity. 2. Gearing and drive sheave is fabricated from hardened steel. 3. Universal attachment of the winches is capable by means of a central 16mm load pin, or two M10 screws. 4. Motor protection: Protected to IP55 as standard. 5. Standard LTD-P series operating voltage: 380V, 3ph, 50Hz (voltage and frequency are available upon request). 6. Control Voltage: 24V for mobile application units and 42V for the stationary applications models. 7. Phase monitoring: As standard on mobile application models, not available on stationary units. 8. Hoist motor, as standard is fitted with a thermal overload protection device. 9. Certification: Certified by and independent inspection institute (TUV). 10. Drive sheave and pressure rollers of special nitrided steel with a surface hardness of approximately 70 HRC, guaranteeing low wear of these components. 11. The fully-synthetic special oil ensures highest possible efficiency for quiet running characteristics, in a temperature range of -40°C to 70°C. 12. Standardised components ensures easy access to all wearing parts.
Introduction To The Best Black Tea in India India is the largest producer and consumer of black tea in the world. All four varieties of tea (green, black, oolong, and white tea) come from the same evergreen plant named Camellia Sinensis. The differences among tea varieties result from the way tea manufacturers process the leaves. What is Black Tea? The best Black tea is a fully oxidized tea, unlike green tea which is not oxidized. The processing of this tea involves the additional step of aeration, followed by the withering of leaves for several hours to oxidize the flavonoids. This darkens the color of leaves from green to dark brownish â?? and also gives a distinctive flavor. If you like the flavor of black tea, you can consume it in a variety of ways. In India, people normally add milk and sugar, as well as herbs such as ginger, mulethi, tulsi (holy basil), cinnamon, cardamom, lemongrass, etc to get the best black tea flavor. Why Do People Drink It? Tea is the second most widely consumed beverage in the world after water. And among all tea varieties, black tea is the most widely consumed. Most people drink it (usually hot) for taste, alertness, and energy. Best Black tea contains caffeine and theophylline, both of which can speed up your heart rate and make you feel more alert. There is good scientific evidence to show that drinking tea is good for health. It not only lowers blood pressure but also increases your immunity and protects the heart, helping prevent obesity and tooth decay (among other things).
Safetybags by DaklaPack Secondary leak proof packaging - 100% leak and tamper proof. Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs. The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody. The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside. Easy to close, simply removing the backing strip and applying even pressure across the strip, the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959). We would be happy to quote you for various formats and for printing, on request. UN3373 Standard â?? Key Requirements The P650 packaging instructions for liquid substances state:- The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, and not contain more than 1kg solid. The secondary packaging shall be leak proof for liquids; (DaklaPack's Safetybags) If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; (DaklaPack's Absorbing sheets + tube holders) If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. One surface of the outer packaging must measure at least 100mm x 100mm (DaklaPack's boxes and shipping solutions are fully conform if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.
Recommended for surgically treated knee joints, perfect for post treatment for strain, sprain & fracture dislocation. Knee support Hinged (Neoprene) is a versatile knee support which offers the advantage of controlled compression around the knee and the rigid side support of a splint. It allows normal flexion and free movement of the knee joint. Silicon buttress along the patella opening. - Biaxial hinge - Anti tourniquet effect - Four way compression. - Neoprene provides therapeutic warmth - Neoprene layer bonded with nylon fabric on both sides - Four way stretch ability gives a controlled and comfortable compression in various positions of the knee. - Ensures longer life. - Appealing aesthetics with color fastness. - Better body heat retention - Faster pain relief and healing. - Anatomical shape - Relieves patellar pressure. - Holds the patella in position - Can be used for Patella femoral diseases - Bi axial heavy duty aluminum hinge - Mimics the natural knee joint - Ensures full weight bearing. - Allows free flexion movement - Ergonomic design - Anti tourniquet effect, ensures no constriction to blood flow - Better grip of the product to the body. - Anatomic construction, Better functionality and Snug fit. Sizes Inches CM Small 14.8-17.2 37-43 Medium 17.2-19.6 43-49 Large 19.6-22 49-55 XL 22-24.4 55-61 XXL 24.4-26.8 61-67
Item Code 14.01.034 Specification Recommended for surgically treated knee joints, perfect for post treatment for strain, sprain & fracture dislocation. Knee support Hinged (Neoprene) is a versatile knee support which offers the advantage of controlled compression around the knee and the rigid side support of a splint. It allows normal flexion and free movement of the knee joint. Silicon buttress along the patella opening. Bi axial hinge Anti tourniquet effect Four way compression. Neoprene provides therapeutic warmth Neoprene layer bonded with nylon fabric on both sides Four way stretch ability gives a controlled and comfortable compression in various positions of the knee. Ensures longer life. Appealing aesthetics with color fastness. Better body heat retention Faster pain relief and healing. Anatomical shape Relieves patella pressure. Holds the patella in position Can be used for Patello femoral diseases Bi axial heavy duty aluminum hinge Mimics the natural knee joint Ensures full weight bearing. Allows free flexion movement Ergonomic design Anti tourniquet effect â?? ensures no constriction to blood flow Better grip of the product to the body. Anatomic constructionâ?? Better functionality and Snug fit. Sizes Sizes Inches CM Small 14.8-17.2 37-43 Medium 17.2-19.6 43-49 Large 19.6-22 49-55 XL 22-24.4 55-61 XXL 24.4-26.8 61-67