Battery-powered rail coachscrewing machine is a new product developed by our company in accordance with international requirements for environmental protection. Using lithium battery as energy source, low-voltage and high-current DC motor as power, it has the characteristics of small size and high power. It is suitable for the tightening operation of ordinary sleeper vertical bolts, turnout sleeper vertical bolts, and high-speed railway sleeper plate vertical bolts. BENEFITS *36V super endurance trolley impact Li-battery Wrench *Super endurance capability, 3000 bolts are loosened and tightened per charge (M27 Boltï¼? *Intelligent torque adjustable design, the operator can set the working torque according to the actual working conditions *Intelligent electronic control technology, the actual working torque will not change with the decrease of battery power *Intelligent digital display, working torque and real-time power digital display *The whole machine is waterproof and can work in rainy days, and can also work under minus 30 degrees *The whole machine is 41 kg, which can be quickly disassembled and assembled, which is convenient for loading and unloading without additional tools SPECIFICATION Rated power 2Kw (brushless DC motor) No-load speed 0-1200rpm Frequency 0-2300 bpm Maximum tightening torque 3000Nm Maximum unscrewing torque 3500Nm Switch type Three switches, safety start switch and forward and reverse switch Illumination Dual LED lights Adjustable torque range digital display 80-500Nm (10Nm increment adjustment) Tightening time of M24 bolts 3~5s Weight â?¤41.5Kg (including sleeve and battery pack) Operating temperature requirements minus 30�°C~45�°C Rated voltage of battery 36V Rated capacity of battery 36Ah Endurance 3000 bolts are loosened and tightened per charge (M27 Boltï¼? Battery life 1000 cycle times of charge Waterproof rating of the whole machine IP45 (safe to use even in heavy rain)
The Buffing & Polishing Machine is the perfect solution for achieving a high-quality shine, designed specifically for shoe polishing and cleaning. Equipped with a powerful dust collector, it efficiently removes and collects dust, maintaining a clean working environment. Shoes Polishing and Cleaning: The Buffing & Polishing Machine is specifically designed for polishing and Shining shoes, making it suitable for various footwear industries. Variable Speed: This machine offers Variable Speed with Drive options; allowing flexibility to adjust the polishing intensity based on the shoe material and desired finish. High-Powered Motor: The machine features a powerful 2 HP motor, providing efficient and reliable performance for effective polishing and cleaning. Dust Collector: Equipped with a 1.5 HP dust collector, it efficiently removes and collects dust, maintaining a clean working environment. Adjustable Motor Speed: The motor speed can be adjusted from 1400 to 2800 rpm, enabling precise control over the polishing process. Durable Construction: Built with quality materials, this polishing machine is durable and designed to withstand the demands of daily use in footwear industries. Model No. BS-704 Motor 2 HP Voltage 440 V Total Electricity Load 2.5 KW/ 3 Phase Drive Delta 2 HP Motor Speed Upto 3000 rpm Dust Collector Motor 1 HP Machine Size 975 x 850 x 1275 mm Dust Collector Motor Speed 2800 rpm
A versatile and efficient solution designed for transferring stickers, Labels, Components and hot fix stones onto fabric. This machine is widely used in the footwear, garment, and bag industries, offering precise and high-quality results. Pressure Adjustment : It offers adjustable pressure through a convenient pressure adjustment screw, allowing you to customize the pressure according to your specific needs. Digital Display Temperature Controller: The machine is equipped with an digital display temperature controller, ensuring precise temperature control during the transfer process. Automatic Electronic Timing with Alert Tone: Our fusing machine offers fully automatic electronic timing, enabling precise control over the transfer duration. The built-in alert tone notifies users when the process is complete, enhancing efficiency and productivity. High-Temperature Cloth Design: The machine incorporates an export-designed, high-temperature cloth for added safety and protection. Antioxidant Cast Aluminum Table and Elastic Silicone Foam Pad: The fusing machine is equipped with an antioxidant cast aluminum table that maintains temperature stability even at high temperatures. The elastic silicone foam pad ensures that the table remains distortion-free at temperatures up to 300â??, resulting in more uniform stamping and impeccable transfer quality. Model No. BS-38 Voltage AC100-220V Weight 21 KG Power Supply AC220V Time Range 0-300s Power Consumption 1.5 KW
This is a powerful 8 KW solution designed for precise and efficient welding of PVC and PU based products. With advanced features and robust construction, this machine ensures reliable performance for high-frequency welding and embossing applications. Anti-Spark Electric System: Equipped with an anti-spark electric system, this machine ensures safe operation and minimizes the risk of electrical hazards, providing peace of mind during usage. Safety Device: The inclusion of a safety device enhances operator safety by providing additional protection during operation, prioritizing the well-being of the user. Special Mechanical Structure: Featuring a special mechanical structure, this machine ensures uniform pressure for PVC welding, resulting in consistent and high-quality welding outcomes. Easy Tuning and Special Protection Circuit: The machine allows for easy tuning, enabling quick adjustments and precise control during the welding process. The special protection circuit safeguards the equipment from electrical fluctuations, enhancing its durability and longevity. Hydraulic Pressure Device: The hydraulic pressure device provides precise control over pressure, making it suitable for welding even challenging alignment products, increasing the versatility of the machine. Model No. BS-602 Power 8 KW Voltage 220V or 380V Input Power 8.5 KVA Frequency 27.12 or 40.68MHZ Maximum Electrode Spacing 160-220mm Working Table 350 x 700mm or 400 x 700mm Temperature Control Range 50-300C Adjustable Welding Time 0-10s Adjustable Table Size 1070 x 1210mm Oil Hydraulic 68no Oil Capacity 30 Ltr. Dimension 1070 x 1680 x 1560 Machine Weight 320 KG
Product Description Bundled for your convenience, the BWT Bestmax Premium Filter Package has everything you need to keep your espresso tasting great and to protect your machine from scale buildup. BWT's Bestmax Premium filter cartridge is an all-in-one water filtration solution. Outstandingly suited for the filtration of water for hot beverages like coffee, espresso, the Bestmax Premium is a modular multi-stage filter that uses patented BWT Mg2+ technology. This unique feature mineralises the filtered water with magnesium, a known flavor enhancer that may be lost using other filtration methods. The Bestmax Premium uses the five layer filtration process detailed below: Particle Pre-Filter - Separation of coarse particles such as sand and rust. Activated Carbon Pre-Filter - Elimination of oxidants, protection of the ion exchanger against aging. High-performance Ion Exchanger - Removal of hardening substances, adjustment of mineral balance. Activated Carbon Nonwoven - Elimination of organic substances, chlorine, foreign odor and foreign taste. Particle Fine Filter - Separation of fine particles and suspended matter. The filter head can be adjusted to one of several blend settings based on the hardness of your water. The blend settings adjust the amount of water run through the ion exchange in ratios of 0/100, 10/90, 25/75, and 40/60. When switching out filter cartridges, the filter head will cut the flow of water to prevent leaks.
This is a powerful 8 KW solution designed for precise and efficient welding of PVC and PU based products. With advanced features and robust construction, this machine ensures reliable performance for high-frequency welding and embossing applications. Anti-Spark Electric System: Equipped with an anti-spark electric system, this machine ensures safe operation and minimizes the risk of electrical hazards, providing peace of mind during usage. Safety Device: The inclusion of a safety device enhances operator safety by providing additional protection during operation, prioritizing the well-being of the user. Special Mechanical Structure: Featuring a special mechanical structure, this machine ensures uniform pressure for PVC welding, resulting in consistent and high-quality welding outcomes. Easy Tuning and Special Protection Circuit: The machine allows for easy tuning, enabling quick adjustments and precise control during the welding process. The special protection circuit safeguards the equipment from electrical fluctuations, enhancing its durability and longevity. Hydraulic Pressure Device: The hydraulic pressure device provides precise control over pressure, making it suitable for welding even challenging alignment products, increasing the versatility of the machine. Model No. BS-602 Power 8 KW Voltage 220V or 380V Input Power 8.5 KVA Frequency 27.12 or 40.68MHZ Maximum Electrode Spacing 160-220mm Working Table 350 x 700mm or 400 x 700mm Temperature Control Range 50-300�°C Adjustable Welding Time 0-10s Adjustable Table Size 1070 x 1210mm Oil Hydraulic 68no Oil Capacity 30 Ltr. Dimension 1070 x 1680 x 1560 Machine Weight 320 KG
Multiple Protections: Dry run protection Phase loss protection Overload/no load protection Short circuit protection Over-voltage protection Pump stalled/antiseizing protection Undervoltage protection Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections:  Dry run protection Phase loss protection Overload/no load protection Short circuit protection Over-voltage protection Pump stalled/antiseizing protection Undervoltage protection Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections:  Dry run protection  Phase loss protection Overload/no load protection  Short circuit protection Over-voltage protection  Pump stalled/antiseizing protection Undervoltage protection  Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections Dry run protection Phase loss protection âOverload/no load protection â? Short circuit protection â? Over-voltage protection â? Pump stalled/antiseizing protection â? Undervoltage protection â? Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Introduction The ARLTS series filter cartridge is made of hydrophobic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. Its main features include strong hydrophobic, high retention rate, excellent chemical resistance and thermal stability. It maintains effective filtration effect for corrosive solvents and strong oxidizing liquids. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophobic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Terminal filtration for organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Terminal filtration for clarification of liquor, beverages, wines, fruit wines, removal of microorganisms and fine particles, etc. Gas Industry: Gas filtration, sterile storage tank respirator, air fermentation tanks, etc.
Introduction The ARLTQ series filter cartridge is made of hydrophilic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. It is suitable for the chemical and pharmaceutical industry with strict requirements. Its main features include stable hydrophilic, high retention rate, excellent chemical resistance and thermal stability. It does not require pre-wetting when filtering solvents with high water content. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophilic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical Industry: Sterile active pharmaceutical ingredients, sterilization filtration of pharmaceutical liquids, etc. Chemical Industry: Filtration of hydrophilic organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Filtration of alcohol, beverage, etc.
Introduction The ARLE series micropore filter cartridge is made of PES micropore membrane as the filtration medium. The uniquely shaped and evenly distributed micropores cover more than 85% of the membrane area, ensuring high filtration efficiency and stability. This product exhibits excellent hydrophilic, is free from surfactants, and features efficient antibacterial properties, low adsorption, high mechanical strength, as well as resistance to high temperatures and pressures. It can withstand multiple cycles of steam sterilization. The double-layer filter membrane formula can better improve the filtration effect. All products have passed the integrity test of the instrument. Specification Filter material: PES micropore filter membrane (single / double Layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 1 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for terminal filtration in pharmaceutical, biological products, microelectronics, semiconductor, chemical and other industries.
Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol
Introduction The filtration medium of ARWP series micropore membrane filter cartridge is made of PP superfine fiber membrane. It is formed by folding the combination of multi-layer filter membranes and thermally welding into 6-inch large diameter structure, providing large filtration area for stable deep filtration effect. This product is available in both external and internal pressure types, featuring high efficiency retention and high liquid flux, widely used in security filtration and pre-filtration across various industries. Specification Filter material: PP micropore filter membrane Diameter: 6" (152mm) Pore size: 1 ~ 80 micron Length: 20", 40", 60" Interface type: Multiple interface selections Gasket/O-rings: Silicone, EPDM Application General industry: Filtration of workshop water for various production processes, etc. Electronics industry: Pre-filtration for reverse osmosis systems, pre-filtration for deionized water, etc. Power plants: Filtration of makeup water, condensate water, cooling water, wastewater treatment, etc.
Introduction The ARTX series filter cartridge uses high-quality polyacrylonitrile as the raw material, which is high-temperature carbonized into powdered fibers in a high-purity inert gas environment. Through special formulation and surface design, it enhances the ability to adsorb suspended solids and precipitated particles in liquids, achieving deep filtration effect. This product performs excellently in chlorine removal, purification and decolorization, adsorption of organic compounds and metal ion removal. Specification Filter material: Powdered activated carbon fiber Length: 5" ~ 40" Pore size: 5 ~ 100 micron (multi-micropore combination) Diameter: 65 mm Interface type: DOE Gasket/O-rings: TPE Application Chemical industry: Air purification, organic solvent decolorization Drinking water: Chlorine removal, odor removal, water purification Electronics industry: Water treatment purification, PCB electroplating, semiconductor FRAME electroplating solution, copper-nickel electroplating solution filtration, etc. Food industry: Filtration for beverages, clarification of wines, etc.
Introduction The common materials of ARLD series filter bags include PE, PP, NMO, and PTFE. This series of products utilizes sewing or hot-melt technology, and the surface is heat-treated at high temperature to effectively prevent fiber shedding. The uniform filter layer has highly efficient filtration of solid and colloidal particles. The high-strength filament fibers enable high flow rate and strong dirt-holding capacity, ensuring stable structure. The filter bags are made of different materials with different chemical corrosion resistance and heat resistance properties, widely applied in primary liquid filtration in various industries. Specification Filter material: PE, PP, NMO, PTFE Pore size: 0.5 ~ 300 micron Filter bag size: Various specifications can be customized Collar ring material: PP, stainless steel Application Pharmaceutical industry: Filtration of various liquid medicines, traditional Chinese medicine preparations, antibiotics, injection bottle washing water Food industry: Filtration of food, beverages, alcohol, drinking water Chemical industry: Filtration of chemical solvents, paints, coatings, inks, adhesives, printing and dyeing pigments, metal cutting, etc.
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Meank provides rubber coated neodymium pot magnets for sale at good wholesale prices. The rubber-coated pot magnets that act as magnetic bases for mounting & holding are called rubber-coated mounting magnets and rubber-coated holding magnets. The rubber pot magnet(also called rubber-coated round base magnets) are the best strong magnet assemblies, which provide solutions of waterproof and rust-proof magnetic clamping to longer the service life. This rubber-coated neodymium pot magnet can be also made with an internal(female) threaded stud, external(male) threaded stem, and threaded screw socket on one non-magnetic side. Because of the soft rubber coated waterproof magnets, scratches are avoided on the surface of contacted objects. You can use the rubberized magnetic system as a magnetic base on cars and fridges for mounting or holding objects. Normal Types Of Rubber Coated Mounting Magnets rubber-coated mounting magnets can be made with internally threaded stud which suits to rubber coated magnetic hooks and rings rubber-coated mounting magnets can be made with an external threaded stud which suit bolts and screw flat rubber-coated mounting magnets can be made with threaded hole suit for flat surface installation. rubber-coated mounting magnets with handles that used as magnetic tools for various operations.
Rare earth samarium cobalt magnets, shorted as SmCo rectangular magnet, are a type of powerful permanent magnet made from the basic elements samarium and cobalt and other metal rare earth materials by mixing, melting, grinding, pressing and sintering. They come in various sizes and shapes, like disc,bar, ring, arc,block, etc.,. Similar to neodymium strong magnets, they belong to the rare earth magnet category, and tcan be classified as SmCo5 and Sm2Co17 according the composition ratios of samarium and cobalt. In comparison to neodymium rare earth magnets, although samarium cobalt magnets may not have as strong magnetic force, they possess two distinct advantages. Firstly, they operate effectively within a higher temperature range, and secondly, they exhibit greater resistance to corrosion. Due to these characteristics, large smco block magnets are commonly employed in applications that demand high operating temperatures, such as generators, pump couplings, sensors, electric motors, marine applications, as well as in the automotive, racing, aerospace, military, and food and manufacturing industries. SmCo rare earth magnets not only perform well at high temperatures but also maintain their magnetic properties even in temperatures below absolute zero (-273 degrees Celsius), making them popular for use in low-temperature applications.
