Science also plays an important role in the design of staff chairs. Designers will use various data and models to test the comfort and safety of the chair. For example, the structure of the chair is optimized by simulating the sitting postures of people of different weights and heights; the pressure distribution map is used to analyze the supporting effect of the seat cushion; the sliding and stability of the chair on different ground materials are even considered. These millimeter-accurate calculations and experiments ensure that the staff chair can perform well under various conditions. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
Specifications of REBOUND 120 HD plasma generator CNC plasma cutting machine: 1. 120 HD plasma generator This CNC plasma cutting machine matches 120/200/300/400HD plasma generator. (1) 100% (40â??) rated duty cycle, suitable for work in heavy industry; (2) Adopt gas pressure sensor, the cutting torch can be properly protected when the gas pressure is too low; (3) Adopt liquid flow sensor, the cutting torch can be properly protected when the liquid flow is too low, and the liquid flow is displayed on the display meter; (4) The gas pre-flow time, gas post-flow time, current up-slope time can be separately set according to the torch cable length; (5) The plasma gas pressure can be adjusted on the panel, the pressure is displayed on the meter, friendly operation; (6) There is digital communication connector, can be connected with different automation equipment; (7) With torch monitoring function, warning to change the consumables, to longer the torch working life; (8) Intelligent fan is used to reduce the dust; (9) With automatic protection of over-heating and lack-voltage. 2. Plasma control system (1) This system is applicable for kinds of flame/plasma cutting machine CNC system, widely used in desktop CNC cutting machine of metal processing, advertisement, stone material industry, etc. (2) The system is designed with high reliability, with plasma interference, lightning protection and surge capacity. (3) Practical flame/plasma cutting process, plasma processing, automatic corner speed control, and control the block. (4) We can use wireless remote control or wired control box to realize remote operation. Back, passage and breakpoints in recovery, to choose the function such as perforation position, greatly convenient user manipulation. (5) It Includes 24 kinds of graphics component library (customizable), contains the common basic processing parts. (6) It works with STARCAM nesting software well, and at the same time compatible IBE (Germany), FASTCAM in major nesting software. (7) Interface conversion, in both English and Chinese language. Also can be customized to other countries. 3. Plasma torch.� REBOUND fine cutting torch Strong perforation ability, good cutting perpendicularity, smooth cut surface. For cutting processes with different currents and metal materials, consumables with good cutting quality are matched.
Coffee Chips is a biomass fuel that comes from filtering coffee grounds and tree bark. Chips are a type of solid fuel made from biomass waste with a smaller size compared to the size of briquettes. The process used is pressing with high temperature and pressure, so it is effective. Product quality: Humidity: 16.4 % (ar) Ash content: 3.8 % (adb) Volatiles: 75.9 (adb) Fixed Carbon: 15.5 % (adb) Sulfur : 0.15 % (adb) Gross Calorific Value : 5,155 Kcal/kg (adb) , 4,527 Kcal/kg (ar) Dimension : 30 MM x 40 MM x 1 MM.
is a fuel derived from coffee filtration grounds and bark. Biopellets are a type of solid fuel based on biomass waste with a size smaller than the size of briquettes. The process used is a press with high temperature and pressure, so that it is effective Product quality: Humidity: 16.4 % (ar) Ash content: 3.8 % (adb) Volatiles: 75.9 (adb) Fixed Carbon: 15.5 % (adb) Sulfur: 0.15 % ( adb) Gross Calorific Value: 5,155 Kcal/kg (adb), 4,527 Kcal/kg (ar). Product dimensions: Diameter: 6-8 MM, Length 10-15 MM
The compression springs are an open coiled type, used where a load or force is required when compressed, or to store energy in the compressed position. A compression spring offers resistance to compressive forces. The rings are wound around, and both ends can be open or closed or flattened or flatten due to the pressure. The shape of the waist and even the various tails can be deformed by design. It is one of the most widely used of all kinds of springs. Typical applications for compression springs include: Aerospace Valve Spray Off-road equipment Automotive Switches Fluid/air control
Graphite Electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, Widely used in LF, EAF for steel making industry, Non-ferrous industry, silicon and phosphorus industry.so it is the best conductive material for electric arc furnace and smelting furnace.
- Production: Wood chips are pressed under high pressure and high temperature with the participation of adhesives - Types of chipboard are distinguished by color indicators. For example: Normally blue - moisture-proof chipboard, red - fireproof chipboard. - To enhance the fire resistance of boards: plaster and cement are sometimes used as adhesives. Common thickness: 9, 11, 12,15, 16, 17, 18, 25mm Common size: Regular size 4*8 / Large size 6*8 Apply: table tops/office partitions/ceilings/flooring for temporary works/making packaging boxes, TV covers, speaker boxes, etc.
- A material produced from many layers of natural wood sliced about 1mm thin. Arranged perpendicularly in the direction of the wood grain and then pressed under high temperature and high pressure with the participation of adhesives. - Every layers of a plywood are always ood number (3,5,7,..) - Plywood has the ability to hold screws and adhere well; Good moisture resistance in ventilated environments. Common thickness of Plywood boards: 3, 4, 5, ,6, 8, 12, 15, 18, 20, 25mm Common size: Regular size 4*8 Apply: floors, walls / apply in interior and exterior / high humidity areas such as kitchens, bathrooms
DTech Products offers PTFE / PFA / PVDF / FEP lined double window sight glass/sight flow indicator. All products are fully lined with either PTFE, FEP, PFA depending on application. MS / SS 304 / SS 316 is also available. Both the glasses are bolted with the body. Fluids can be viewed from either top or bottom side. Our sight glass has Pressure resistance, Sturdy built, corrosion resistance, Durable. We do manufacturing, exporting and Supplying PFA / PVDF / FEP Lined Double Window Type Sight Glass in various grade of Teflon lining to suit temperature application in Flanged End Connection.
The thick sponge filling provides excellent support to those who sit in the chair. This kind of filling can absorb the weight of the body well, reduce the pressure on the body from sitting, and you will not feel uncomfortable even if you sit for a long time. The wide seat cushion ensures your body's comfort when sitting, allowing you to fully relax whether you are reading, working or resting. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
The thick sponge filling provides excellent support to those who sit in the chair. This kind of filling can absorb the weight of the body well, reduce the pressure on the body from sitting, and you will not feel uncomfortable even if you sit for a long time. The wide seat cushion ensures your body's comfort when sitting, allowing you to fully relax whether you are reading, working or resting. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
Purpose: warping yarn on a crosna Model: KDW-T36 Product number: W-6027 Year of manufacture: November 1985 Width of the shafts: 1600mm Working width: 1500mm Crosna diameter: 670mm Number of bobbins on the gatter: 2 x 304 = 608 Count of threads: 608 Distances between the spindles of the gatter: horizontal size 250mm, vertical size 230mm Power consumption: 10kW, main motor â?? DC 7.5kW Gauges of the warping machine: length: 3.50m, width: 2.70m. Gauges of the gatte, when opened: length 11.50m, width 5.20m, height 2.3m. It is powered by electricity and air with a pressure of 5 Bar. The machine has documentation - incomplete. No spare parts.
Purpose: warping yarn on a crosna Model: KDW-T5 Product number: W-5005 Year of manufacture: August 1975 Width of the shafts: 1600mm Working width: 1500mm Crosna diameter: 670mm Number of bobbins on the gatter: 2 x 304 = 608 Count of threads: 608 Distances between the spindles of the gatter: horizontal size 250mm, vertical size 230mm Power consumption: 10kW, main motor â?? DC 7.5kW Gauges of the warping machine: length: 3.50m, width: 2.70m. Gauges of the gatte, when opened: length 11.50m, width 5.20m, height 2.3m It is powered by electricity and air with a pressure of 5 Bar. The machine has documentation - incomplete. No spare parts.
In making briquettes, 2.5% starch adhesive is used which is cold pressed at a pressure of 3.125 tonnes. The research results showed that compared to briquettes made from 100% sawdust charcoal, the addition of coconut shell charcoal was able to increase the density, compressive strength and calorific value. Overall the density value of charcoal briquettes ranged from 0.45-0.59 g/cm3, compressive strength 4.67-6.72 kg/cm2, water content 3.51-4.75%, volatile matter content 22.18-25.77. ash content 3.56-4.23%, bound carbon content 70.28-73.82% and calorific value ranging from 6,198.99-6,522.84 cal/g
Product name inconel mesh inconel wire screen  inconel screen  inconel fabric Material: inconel 600 625 718 and others Mesh count:1-200 mesh Wire diameter:0.05-5 mm and others Hole:20-0.077mm Weave type:plain/twill weave Roll width:0.9 1 1.2 1.5 1.8 2 meters Roll Length:30 60 meters or customized Application: Aerospace� � Chemical Processing Electronic Components Food Processing Gas Turbine Components Heat Exchangers Pressure Valves Pulp & Paper
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Liquid sodium silicate products are slightly sticky, but they have only moderate tack compared to many organic pressure sensitive adhesives. As the water evaporates, liquid silicates become progressively tackier and more viscous. Generally, only a small portion of the water (several percent by weight) needs to evaporate before the adhesive exhibits good handling strength. Therefore, sodium silicate adhesives are often employed in applications requiring high machine speeds and fast setting characteristics. The effects of water evaporation on the viscosities of several liquid sodium silicate products are shown in the table below.
Product Description The Abu Garcia Ambassadeur S Casting Combos are made with performance and reliability all in one package. These combos are made with a compact bent handle and star to provide a more ergonomic design. Features: 2 stainless steel ball bearings for smooth operation Smooth and consistent multi disc drag system 4 pin centrifugal brake gives consistent brake pressure throughout the cast Synchronized level wind system improves line lay and castability 24 ton graphite for a lightweight balanced design Texas rigged hook keeper for all bait applications Light weight cork grips
Product Description The Abu Garcia Ambassadeur STX Round Baitcasting reels are made with quality and are dependable. These reels also provide excellent casting control along with ergonomic feel and durability. The Ambassadeur STX series reels delivers true on the water performance. Features: 4 stainless steel ball bearings + 1 roller bearing provides smooth operation Multi disc drag system gives smooth drag performance Compact bent handle and star provide a more ergonomic design 6 pin centrifugal brake gives consistent brake pressure throughout the cast Synchronized level wind system improves line lay and castability
