Special features 1. 12 year anti-rust guarantee. 2.1.84 metres wall height. 3. Rust-free screws. 4. Free anchor kit included in the carton. 5. Free gardening gloves included in the carton. 6. Easy to follow assembly manual. 7. Rust, rot and rodent proof. 8. All panels have hemmed edges for safety 9. All panels have preformed hole easy for installation 10. Corrugated wall and roof panels: strong deep ribbed corrugated wall and roof panels ensure maximum security and strength. Product description 1. Material: 0.26mm or 0.35mm thick corrugated color steel panel, two-sides coated, maintenance free and long lasting ridge reinforced walls. 2. Dual ventilated front gables 3. Colors of garden shed: green, light grey, cream or wood color 4. Uncomplicated home assembly in approx. Within 4 hours 5. The foundation and floors are not included in our quotation. If customers need foundations, we will charge some fees for it. 6. 15 years rustless, perforation warranty easy for install. 7. The garden shed is used for store tool, car, etc. 8. Double slide door Size of garden shed Model# Outer size(mm) Door Height(cm) G.W. Fcl quantity Nz-a 3720(l)*31200(w)*2050(h) 12 x10ft 184 193kg 42sets/20fcl 96sets/40hc Nz-b 3120(l)*3120(w)*2050(h) 10 x 10 ft 184 178kg 42sets/20fcl 96sets/40hc Nz-c 3120(l)*2400(w)*2050(h) 10 x 8 ft 184 150kg 48sets/20fcl 128sets/40'hc Nz-d 2500(l)*2400(w)*2050(h) 8 x 8 ft 184 133kg 54sets/20fcl 144sets/40hc Nz-e 2500(l)*1890(w)*2000(h) 8 x 6 ft 184 118kg 60sets/20fcl 144sets/40'hc Nz-f 2500(l)*1280(w)*1940(h) 8 x 4 ft 184 99kg 60sets/20fcl 160sets/40'hc Nz-g 1890(l)*1280(w)*1940(h) 6x 4 ft 170 59kg 80sets/20fcl 192sets/40'hc
BACK PAINTED GLASS has another name --Lacquer Glass. It is used for Wardrobe, Table, Wall, Kitchen, Partition,Reception, Sliding Room and so on. It is produced on the same line with mirror.Neo Painted Glass is usually with double paint unless the customer has special requirement. The adhesive force between the glass and the paint is very strong. The basic glass can be Low Iron Glass/Ultra Clear Glass, and Clear Glass or the one the customer appoints to. Back Painted Glass is available on different colors due to the various colors of Paint, such as White, Super White, Black, Red etc. It can be vinyl back to become Safety Glass. It is widely used as Partition Glass, Table Glass, Wall Glass, Splashback, Kitchen Glass, Furniture Glass, Sliding Door etc. Back Painted Glass can also be laminated to be Laminated Painted Glass AS/NZS 2208:1996 certificate is available for Back Painted Glass/Lacquered Glass with Grade A vinyl Back to Australia and New Zealand Market Size: Max. 2440 x3660 mm Thickness: 3-8mm Certificates: AS/NZS 2208: 1996, CE, ISO 9002 Glass: Float Glass, Annealed Glass,Low Iron Glass Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc Glass Process: Float Glass, Glass with Polished Edges/Holes/ Cutout , Irregular Shape Paint: Italian Fenzi, Qualified China brand Paint Color: White, Ultra White, Black, Red, Grey etc. Package: Plywood End Cap, Plywood Crate, Metal End Cap, Carton Package, Pallet Etc. Plywood End Cap Plywood is one of the materials free of fumigation. It is safe to use the package with the design " End Cap" to deliver the glass. Besides,it is also easier and quicker for operators on the floor to unpack the glass on the trolley. Naked Package Naked Package take less trouble to the customers to handle the package material. A frame is made of metal.It is easy to be disassembled by tool and stocked on the corner or some place else. Metal End Cap Metal End Cap is another design for package.Metal material is welded together, then it is not easy for the end cap to be distorted during the transportation and damage the glass especially there is storm on the ocean. Carton Package The specification of the glass on some part are standard in some countries, such as on the Door, Window etc.Mass production in advance and wholesale in the shopping mall become workable on them.
INSULATING GLASS UNIT (IGU,DGU) is popular in Curtain Wall, Door & Windows, especially the one with Low E glass or other energy efficiency glass because of its energy saving,Environmental protection and Sound Acoustic performances. More and more governments in the world stipulate that the developer or builder is mandatory to use IGU,especially energy -efficient IGU as window glass in residential buildings for environmental-protection. IGU/DGU is made of two sheets of glass or more or combined glass, such as laminated glass with spacer. Neo IGU can be combined by Annealed Glass,Tempered Glass,Laminated Glass. Float Glass, Low E, or other Performance Glass are also the choices.Air or inert gas, such as argon is alternative to increase the glass performance. Besides the property of energy-efficient, acoustic sound is its another characteristics, especially it is with inert glass, or laminated glass with acoustic PVB. With certificates of AS/NZS 2208: 1996 and CE, the glass sell well in Australia and New Zealand Market, Europe, USA, Canada and South of America Size: Max. 2440 x3660 mm Certificates: AS/NZS 2208: 1996, CE, ISO 9002 Glass: Float Glass, Annealed Glass, Patterned Glass, Low E Glass, Low Iron Glass Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc Glass Process: Float Glass,Tempered Glass with or W/O Heat Soaked, Polished Edges, Ceramic Frit Glass, Irregular Shape Package: Plywood End Cap, Plywood Crate, Metal End Cap, Carton Package, Pallet Etc. Plywood End Cap Plywood is one of the materials free of fumigation. It is safe to use the package with the design " End Cap" to deliver the glass. Besides,it is also easier and quicker for operators on the floor to unpack the glass on the trolley. Naked Package Naked Package take less trouble to the customers to handle the package material. A frame is made of metal.It is easy to be disassembled by tool and stocked on the corner or some place else. Metal End Cap Metal End Cap is another design for package.Metal material is welded together, then it is not easy for the end cap to be distorted during the transportation and damage the glass especially there is storm on the ocean. Carton Package The specification of the glass on some part are standard in some countries, such as on the Door, Window etc.Mass production in advance and wholesale in the shopping mall become workable on them.
Silver mirror is indispensable in our life, especially for ladys life. Besides of the use in cosmetics, Silver Mirror can also be used in Mirror Wall, Shower Room, Wardrobe etc. Neo Mirror can become safety glass after vinyl back with CAT I or CAT II. Besides single silver mirror sheet, we can also do laminated silver mirror with two sheets of Neo silver mirror or one sheet of Neo silver mirror. Mirror is made by Chemical Reaction, then the quality of the raw glass must be Mirroring Grade, otherwise the Reflection would be distorted or some other defective happens, such as spot, paint or silvering coat peel off. Either Copper Silver Mirror or Copper Free Silver Mirror is available. Besides, we can also provide Tint Mirror for decoration and Aluminum Mirror for motorbike and cosmetic box. Mirror can be assembled on Wall, furniture, Sliding door, Washing Room, Dancing Room etc. AS/NZS 2208:1996 certificate is available for Silver Mirror with Grade A vinyl Back to Australia and New Zealand Market Size: Max. 2440 x3660 mm Thickness: 3-8mm Certificates: AS/NZS 2208: 1996, CE, ISO 9002 Glass: Float Glass, Annealed Glass, Patterned Glass, Low Iron Glass Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc Glass Process: Float Glass, Glass with Polished Edges/Holes/ Cutout , Irregular Shape Package: Plywood End Cap, Plywood Crate, Metal End Cap, Carton Package, Pallet Etc. Plywood End Cap Plywood is one of the materials free of fumigation. It is safe to use the package with the design " End Cap" to deliver the glass. Besides,it is also easier and quicker for operators on the floor to unpack the glass on the trolley. Naked Package Naked Package take less trouble to the customers to handle the package material. A frame is made of metal.It is easy to be disassembled by tool and stocked on the corner or some place else. Metal End Cap Metal End Cap is another design for package.Metal material is welded together, then it is not easy for the end cap to be distorted during the transportation and damage the glass especially there is storm on the ocean. Carton Package The specification of the glass on some part are standard in some countries, such as on the Door, Window etc.Mass production in advance and wholesale in the shopping mall become workable on them.
china vibrate knife cutting machine The vibrating knife is currently a relatively widely used processing equipment in the cutting process of flexible materials. It uses the upper and lower high frequency vibration of the blade to cut, gradually improving or replacing the traditional flexible cutting process equipment. Advantages Simple operation, high efficiency, Environmentally friendly and odorless 1. The cutting process has no peculiar smell. The vibrating knife cutting machine uses a very sharp blade to cut, and does not produce a pungent smell. 2. The cutting edge is flat and smooth, and the cutting surface is very neat to facilitate the later processing of the product. 3. The cutting speed is very fast. Due to the blade cutting, the vibrating knife cutting machine can cut flexible materials very fast. 4. The operation is simple, and the automatic cutting method eliminates the need for manual assistance to cut, which virtually saves some unnecessary human resources. 5. Taiwan square rail guide, smooth operation, high precision, long life. 6. The precision of� the grinding rack can reach level 5, the pitch error of the phase lead is 0.003mm, and the cumulative error is 0.035mm (1000mm length). Rack specifications: modulus 1-12, with straight and helical teeth, helical helix angle 19 degrees 31 minutes 42 seconds, pressure angle 20 degrees, 500mm/1000mm rack side has mounting holes and positioning pin holes. 7. RUIDA control system is a knife cutting controller independently developed by Ruida Technology with the function of tool direction following control. It integrates the processing of tools such as vibrating cutters, round cutters, milling cutters, and pressing wheels. It also integrates feeding and circular punching. , V-shaped special punching, brush processing, red light positioning and a series of functions. 8. Vibrating knife cutting machine vacuum adsorption work surface: partition adsorption selection: according to the size of the material, the size of the pattern selects the partition dense Applicable Industry Paper-plastic packaging, leather, PU, PVC, Oxford cloth, corrugated paper, KT board, seats, rubber, gaskets, furniture, textile, metal, electronics and other flexible materials. If you want to know the latest news about the Fiber Laser Engraving Machine, 30w Fiber Laser Engraver manufacturers, please come to our website and get a quote for free.
High Frequency Door Assembly Machine 1. Introduction: High frequency door assembly machine is multi-functional machine. Can be used to assemble the solid wood door (with or without glass), window, cabinet door etc. With three direction pressure design, it can also make edge glued panels, door pocket sealing and batten sealing projects. Machine applied high frequency generator. High freuqneyc is selective heating method, which only heats glue. The whole frame or panel will not be heated. In this way, production time and energy can be highly saved.1-2 mins can finish one cycle. Wish skillful operator, one machine can finish more than 100 pieces solid wood doors per day (8 working hours). HF door assembly machine has slat working table design, which is humanistic for workers loading and upload doors. 3D hydraulic pressure can give uniform pressure on the door. Customer can adjust the pressure according to different thickness doors. Once produce small doors, hydraulic valve can be switched off accordingly. 2. Features: 1). High frequency internal heating, only heat the glue line, efficiently and energy saving. 2). 1-2 mins can finish one solid wood door. 3). Machine can protect the door surface from scratching. 4). Can assemble the frame via 3D pressure. 5). Inclined working table is more humanized and convenient for material loading. 6). International famous brand components and safety protection assure machine good and safe performance. 3.Parameter: High frequency Door Assembly machine ModelHFDA-8x3-CHHFDA-8x4-CH Working table2460x960mm2460x1220mm Working thicknessBelow 60mmBelow 60mm Control typePLC control automatically Power supply3 phase 380V, 50Hz or customized Output power20KW20KW Frequency6.78MHz6.78MHzTop Pressure25T25T Side pressure4T4T Door lifting pressure6T6T Commutate modeThree phase full wave silicon commutate Cooling modeForced Air CooledForced Air Cooled ProtectionPhotoelectric protection for operator, over current protection, air pressure protection, over temperature protection, door switch Delivery time40 working days35 working days ComponentsControl components are Omron, Schneider, Moeller etc Total weight4500kg5000kgs Overal size (L*W*H mm)Main press: 3700*1650*2200 Hydraulic station: 1000*950*1200 Control cabinet: 600*600*1000Main press: 3700*1650*2300 Hydraulic station: 1000*950*1200 Control cabinet: 600*600*1000 Function1). Solid wood frame 2). Batten sealing. 3). Door pocket sealing. 4). Solid wood door assembling. 5). Finger joint board joining.
What is it ? Fireplace ceramic glass is best for higher temperature applications, which is also called crystallite glass. It can withstand constant temperatures up to either 1256 degrees F (PyroCeram 1/8" or 3mm thick) or 1470 degrees F (NeoCeram, 3/16" or 5mm thick). It is actually not glass, but a polycrystalline, clear ceramic material. Because of its ability to withstand constant high temperature, it is best used for applications where glass must be within a proximity of 6 inches or less to fire or for applications where the temperature exceeds what tempered glass can withstand. Advantages:  It is resisting to heat and cold, even to extreme temperature changes. This extraordinary property enables a variety of applications: cooking on glass ceramic appliances day after day, and protecting your fire places or stoves, still enjoying flames view. It is low thermal expansion, lower than borosilicate glasses or standard. It can enhance the beauty and functionality of any fireplace design, and increase safety and efficiency with the installation of a quality Stoll fireplace glass. It can prevent heat loss and increase the heat output for the firepl ace. It has variety of color for which it is manufactured by integrating product method, there is no natural stone texture (break), set product method is a kind of can make rich tonal. Application: Vision panels for room heaters (fireplace), glass heaters, glass heating tabletops, and heat preservation board/panels; Cover panels for heating radiators, drying stand, towel heaters; Cover panels for reflectors and high performance floodlights; Cover panels in IR drying appliances; Cover panels for beamers; UV blocking shields; Cover panels for kebab grill radiators, electric heating fish bowl; Specification 1.Size:  330*410,540*620, 2000*1100 and deep processing according to requirement 2. Available thickness: 3, mm, 4mm, 5mm 3. Net sized glass of strengthening can be supplied as per the customerâ??s requirement; 4. Glass of small cut size is available according the requirement from customers. 5. Density---approx. 2.6 g /cm3 6. Modulus of Elasticity--- approx. 93 x 103 Mpa 7. Bending Strength--- approx. 35 MPa The bending strength testing is to be accomplished according to DIN EN 1288 part 5 (R45). 8. Thermal Characteristics Coefficient of Mean Linear Expansion---α (20-700 degree C)   (0 +/- 0.5) x 10-6 /K 9. Resistance to Temperature Differences (RTD) Resistance of the panel to temperature differences between heated zone and cold panel edge (room temperature). No cracking due to thermal stress at Tes, max1
Tinning is the process of thinly coating sheets of wrought iron or steel with tin, and the resulting product is known as tinplate. The majority of applications for Tinplate(ETP) are used by the container industry in the manufacturing of cans, ends and closures for the food and beverage industry. Tin mill products are produced with certain standardized product characteristics, including terminology, composition, mechanical properties, surface finish, coating weights and others, Focusing on high grade tinplate, according to our experience, RIC will give correct source to different request, in order to satisfy quality request. Characteristics RIC’s Tinplate products meet request of international standard, covering most of the specifications: Product Standard GB/T2520-2000 EN10202-2001 JISG3303-2002 ASTMA657M-2003 Dimension Thickness(mm) 0.14~0.60mm (Tolerance:+/-0.003mm) Width(mm) 600~1000mm (Tolerance:+3/-0mm) Length(mm) 600~1200mm (Tolerance:+3/-0mm) Tin Coating Equal coating 1.0/1.0, 2.0/2.0, 2.8/2.8, 5.6/5.6 (g/m²) Different coating 1.0/2.8, 2.8/4.0, 2.8/5.6, 2.0/5.6 (g/m²) Temper Single-reduced BA(Batch Annealing) & CA (Continuous Annealing) T1, T2, T3, T4, T5 Double-reduced DR7, DR8, DR9 Surface Roughness Bright Stone Silver Matte =0.35 µm Ra 0.25-0.60µm Ra =0.90µm Ra Various Packing Coil Sheet Coil ID(mm)420 or 508 mm Sheet shape Straight or Scroll sheet Coil Weight 4 ~12Mt Sheet weight0.8 ~ 1.8 Mt Packing: anti-rust paper +waterproof film+ steel cover+angle iron+plastic belt+galvanized iron+steel belt+fumigation wooden pallet Packing: sleeve + anti-rust paper + waterproof film+galvanized iron cover + steel edge cover+ steel belt+fumigation wooden pallet Application Tinplate products, principally used for food packaging material, now serve many functional purposes. Today, tinplate product can be widely used in different aspects as follows: 1. Cans and Closures 2. Construction Products 3. Automotive Applications 4. Various Applications Our tinplate material, could produce into below products, based different request from customers: Cans and Closures Aerosol Cans Bread Boxes Containers Juice Cans ? Caps and Ends Pails Construction Products Cable Sheathing Ceiling Rail Ducts ? Utility Sheds Automotive Applications Battery Tops GasketsOil Filters Tubing Various Applications Baking Pans Bulletin Boards Cookie Sheets curtain Rods Filing CabinetsFlashlight Cases Furnace Filters Picture Frames Signs Toys
Description & Specifications of quoted machine-standard single vibrating head: X working size 1600mm, if with double heads such as creasing wheel or other tools, working size will be 1500mm-1550mm, if with camera and spindle, machine working width will be about 1300-1400mm Y working size 2500mm Z working size 10mm max Cutting head cnc oscillating knife cutting head Display way English LED touch screen Machine table Aluminum bellow Suction Table with 9 suction zone Data transfer way Intel Vacuum pump 9KW air type vacuum pump Driving system Taiwan delta servo driver and motor Control system RD control system Guiding system Taiwan TBI square rail Tool sensor With, red dot Transmission Y rack pinion, XZ synchronous steel belt Cutting speed 30m/min Traveling speed 50m/min Weight About 600kgs Size 2250*3300*1650mm Power 380V 50HZ Software vcutworks, machine has this software, support dxf, plt format file Features: High speed: Only need 80 seconds to finish one set of car foot mat., only need 6 minutes to finish one set of car cushion mattress High efficiency: don't need any die mold, or die mold cutting machine, this machine can press mark, cutting and molding on soft material such as leather, carton etc. Save much labor and cost. Low cost: one machine can do design, cutting instead of manual design and cutting, save labor, and material wastage cost. Wide application: This machine can cut leather, PU, fiber, EVA, XPE, sponge cladding, composite cladding, Sponge+drape+composite leather, PVC foot mat, paper, carton, plastic board etc. Soft material. Good performance: adopt Taiwan TBI ball screw or Wuxi High precision rack pinion, low noise, accurate transmission. Long lifespan and high precision. Cnc oscillating knife cutting machine Application: Sofa, seat, car seat cover, automobile floor mat, automotive carpet, luggage, handbags industries, applied to the shoe industry, clothing industry, composite materials, luggage industry, automobile industry, advertising printing industry, electronics industry, decoration industry, furniture industry and so on
HF Mini Hot Press for Cabinet Door Assembly 1. Introduction: High frequency mini hot press is short of HF mini hot press. It is multi-functional machine. Can be used to assemble the solid wood door (with or without glass), window, cabinet door etc. With three direction pressure design, it can also make edge glued panels, door pocket sealing and batten sealing projects. Machine applied high frequency generator. High freuqneyc is selective heating method, which only heats glue. The whole frame or panel will not be heated. In this way, production time and energy can be highly saved.1-2 mins can finish one cycle. Wish skillful operator, one machine can finish more than 100 pieces solid wood doors per day (8 working hours). HF door assembly machine has slat working table design, which is humanistic for workers loading and upload doors. 3D hydraulic pressure can give uniform pressure on the door. Customer can adjust the pressure according to different thickness doors. Once produce small doors, hydraulic valve can be switched off accordingly. 2. Features: 1). High frequency internal heating, only heat the glue line, efficiently and energy saving. 2). 1-2 mins can finish one solid wood door. 3). Machine can protect the door surface from scratching. 4). Can assemble the frame via 3D pressure. 5). Inclined working table is more humanized and convenient for material loading. 6). International famous brand components and safety protection assure machine good and safe performance. 3.Parameter: High frequency Mini Hot Press ModelHFMP-1206-CHHFMP-1608-CH Working table1200x600mm1600x800mm Working thicknessBelow 40mmBelow 40mm Control typePLC control automatically Power supply3 phase 380V, 50Hz or customized Output power15KW15KW Frequency6.78MHz6.78MHz Top Pressure5T15T Side pressure2.5T6T Door lifting pressure2.5T4T Commutate modeThree phase full wave silicon commutate Cooling modeForced Air CooledForced Air Cooled ProtectionPhotoelectric protection for operator, over current protection, air pressure protection, over temperature protection, door switch Delivery time40 working days35 working days ComponentsControl components are Omron, Schneider, Moeller etc Total weight2500kg3500kgs Overal size (L*W*H mm)Main press: 2000*1450*2200 Hydraulic station: 1000*950*1200 HF generator: 1100x 900x 1900mmMain press: 2400*1650*2300 Hydraulic station: 1000*950*1200 HF generator: 1100x 900x 1900mm Function1). Solid wood frame 2). Batten sealing. 3). Door pocket sealing. 4). Solid wood door assembling. 5). Finger joint board joining.
Practical Steel Wooden Floor Sample Display Showroom Deck Tile Stand for Marble Mosaic Stone Cabinet Boards Ceramic Display 1. Item Number for Modern Custom Countertop Granite Marble Quartz Stone Sample Display for Showroom: TP-292, 2. Display Max Payload: 50kg, 3. Display Plate Thickness: 2mm, 4. Samples Display Quantity: 12PCS, 5. Brand or Logo: can be customized as you request, 6. General Trade Mark or LOGO Treatment: silk printing, stickers and Lazer mark, 7. Overall Dimension: 498x790x1828mm (WxDxH). 8. Generally do not have stock, all models have to produce after payment received, 9. MOQ: 200PCS, 10. Manufacturer Location: Foshan, Guangdong, China. 11. Customized paper carton are accept, 12. Customized design for any kind of steel display stand are accept, 13. Drawings for customized models are needed and shall confirmed before producing, 14. Sample Leading Time: 3 to 7 days after payment received, 15. Bulk Order Leading Time: 30000PCS/25 day after deposit received, 16. General Models' Trade Terms: 30% payment send to us as deposit before producing, balance shall clean before shipping. 15. Customized Models' Trade Terms: 45% payment send to us as deposit before producing, balance shall clean before shipping. 16. If shipping marks are needed, exact descriptions of it are needed, 17. If Adverting billboards are needed, please share us your layouts 18. Warranty: 6 month, About Us: Yizai Metal Works Co., Ltd are dedicated to the quality of our metal craftsmanship, quality and ability to offer comprehensive custom solutions. This has lead us to create exceptional universal carts, racks shelving,furniture and custom products. We specialize in volume custom fabrication that focuses on the customer requirements. Contact us to discuss your specific needs. If it is a material handling, storage or transport product we can provide it and meet your requirements.Yizai Metal Works has operated for over 16+ years. Our product range has covered commercial display standard, warehouse storage rack, household organization, logistics & distribution shelves, retail chain stores, manufacturing facilities. Check out our product line. We offer factory direct shipping and very competitive pricing on volume production orders. Since we do not produce small order quantities, our pricing remains highly attractive and our personal attention to your requirements assures quality and success throughout the process. We are confident you will find us to be the right company to source your steel products. Any product on our website can be modified to fit your specific needs. We also know material handling and can work with you to create the custom fabrication design required.Contact us for more details.
Plywood sheets, veneer plywood, laminated plywood sheets, and stunning wooden flooring solutions.Manufacture
PVC strech celling film, is a kind of backlit vinyl film. DERFLEX professionally manufacture PVC vinyl film, digital printing media. DERFLEX is professional manufacturer and supplier of� PVC ceiling film. We focus on manufacturing and exploring� backlit vinyl. Soft film ceiling - founded in Switzerland in nineteenth Century and introduced into China in 95, has been introduced into china. This is a kind of interior decoration material which is widely used in recent years. The soft film needs to be measured in the field and produced in the factory. The stability of the soft film size is from -15 degrees Celsius to 45 degrees celsius. Transparent film smallpox can be matched with various lighting systems (such as neon lamp, fluorescent lamp, LED lamp) to create a dreamy, shadowless lighting effect. Main charicteristics of� PVC strech ceiling film: 1, fire prevention function:� soft film smallpox� has met the fire standards of many countries. British BSSTANDARD476, PART 7, CLASS, IY, the United States ASTM, European M1, and national standard CODE NO:2000 1132. The standard of fire protection in China is B1. Simply speaking, ordinary building materials (such as wood, gypsum boards, to metal ceilings), when heated or burned, will spread fire and heat to other locations. However, soft film smallpox after burning, will melt through itself, and in a few seconds to shrink, until leaving the fire, and then stop automatically, and does not emit harmful gases or harm the human body or property under drip solution. Application: *The administration, office buildings, commercial office building. * industrial areas and hospitals, epidemic prevention stations, clinics. * private homes, villas, apartments, bathroom, kitchen. * school, kindergarten, a large lecture hall, computer room, Internet cafes, etc.. * sports venues, swimming pool, gym, billiards room, Volleyball Hall, basketball hall. * The church, hotel lobby, auditorium, restaurant, bar, cafe, music hall. * brand stores: brand clothing stores, 4S stores, jewelry stores, etc.. * public places: shopping malls, theme parks, airports, subway, exchange, museum, art museum, library, art exhibition, beauty salon etc.. * sales offices model rooms, clubs, leisure club etc.. 2, energy-saving features: first, the� printable� vinyl� is in accordance with the movie screen and manufacturing, such as at the surface can be found to have numerous concave lines, and this is the light refraction will strengthen, so we encourage users to install wall lamp or lamp would enhance the effect, this method can reduce the number of light sources. Moreover, the essence of the soft film ceiling is made of PVC material, which can greatly improve the insulation function, and can greatly reduce the indoor temperature loss, especially the place where the air conditioner is often needed. The principle is the same as divers wearing scuba suits to delay the loss of body temperature in seawater. 3, germproof function: because the� backlit vinyl� in the factory has a hybrid called a BIO - PRUF antimicrobial treatment. This trademark has been registered in the United states. And 30 years of experience. The specially treated material resists and prevents microorganisms, such as common molds, from growing on the surface of an object so as to provide an additional protection for ordinary users, especially children, bedrooms, and bathrooms. It is designated by the Hongkong medical association. 4, waterproof function: Water Leakage occurs in the traditional ceiling of the accident, often causing users very embarrassed, but failed to immediately stop Water Leakage, so that the indoor property destroyed; even affect the lower housing is made of soft film smallpox� PVC material film, installation structure with closed design, so when it comes to Water Leakage case, can temporarily supporting the sewage, so that the owners make timely treatment.5, Color:� soft film ceiling, there are many colors, 8 types to choose from, such as dumb light, glossy, suede, metal surface, hole and light transmission surface. All kinds of fabrics have their own features. Among them, the diameter of the hole surface has 1mm, 2mm, 3mm, 4mm, 10mm and other types for designers to choose. 6, creativity: because the� backlit film� is a soft material, is based on the shape of keel to determine its shape. Therefore, the shape is more casual and varied. Let designers be more creative. 7,� easy installation: it can be installed directly on walls, wooden sides, steel structures, plaster walls and wooden walls. Suitable for all kinds of building structures. Moreover, the� PVC flexible film� keel can be uniformly fixed only by screws at a certain distance, and the installation is very convenient. Throughout the installation process, there will be no volatile solvents, no dust, not in the space of other furnishings have an impact, does not affect the normal production, work and life order.8� anti-aging: special keel is divided into PVC and aluminum alloy two kinds of material, the main structure of the soft film is PVC, soft film buckle edge is also made by PVC with several special additives. All of these components can last up to ten years. In the correct installation, the use of the process will not produce cracks, will not decolorization or small pieces fall. 9, safety and environmental protection:� backlit vinyl strech film� in environmental protection has outstanding advantages, it is in full compliance with European and domestic testing standards. All the soft films are made of environmentally friendly materials, without cadmium, ethanol and other harmful substances. Recyclable, in the manufacture, transportation, installation, use, recycling process, will not have any impact on the environment, in full compliance with today\'s environmental issues. 10, acoustics effect: the relevant departments of the relevant testing, proved that this material can effectively improve the room tone effect. Several of these materials are effectively soundproof. It is an ideal soundproof decorative material.
Plywood, laminates, veneer, modular accessories, door , wooden flooring.
Our company can offer RUF briquettes as follows: Technical specifications of wood briquettes: Calorific value 18,7 MJ/kg Ash content 0,4% Moisture 7,5% Density 0,96kg/dm3 1 RUF briquette size - 65/95/150mm Standard packaging 10 kg bags (12 briquettes), 150/190/390mm Price - FAS Odessa, Ukraine 165 EUR per ton FCA, Kiev 145 EUR per ton
Filmface shuttering plywood, particle board, flush doors, pine wood runners .
Mdf board, melamine plywood, container flooring plywood, container floor board, bamboo container floorboard, and etc..
Origin: latvia Quality: abc grade Kd: 10% Thickness: 24mm +1mm Width: 100mm and up Length: 2, 0m and up + 100mm free trim
Structure 44mm Heat treated spruce wood 60mm Stainless steel strips Floor boards 19-20mm heat treated spruce wood 8mm Toughened glass Floor area 3m2 approx Height 150cm Length 200cm Width 160cm Slide included 420cm Wholesale price 1250
Data Center Solutions, Data Center Accessories, Server Room Flooring.
