Introduction The common materials of ARLD series filter bags include PE, PP, NMO, and PTFE. This series of products utilizes sewing or hot-melt technology, and the surface is heat-treated at high temperature to effectively prevent fiber shedding. The uniform filter layer has highly efficient filtration of solid and colloidal particles. The high-strength filament fibers enable high flow rate and strong dirt-holding capacity, ensuring stable structure. The filter bags are made of different materials with different chemical corrosion resistance and heat resistance properties, widely applied in primary liquid filtration in various industries. Specification Filter material: PE, PP, NMO, PTFE Pore size: 0.5 ~ 300 micron Filter bag size: Various specifications can be customized Collar ring material: PP, stainless steel Application Pharmaceutical industry: Filtration of various liquid medicines, traditional Chinese medicine preparations, antibiotics, injection bottle washing water Food industry: Filtration of food, beverages, alcohol, drinking water Chemical industry: Filtration of chemical solvents, paints, coatings, inks, adhesives, printing and dyeing pigments, metal cutting, etc.
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Meank provides rubber coated neodymium pot magnets for sale at good wholesale prices. The rubber-coated pot magnets that act as magnetic bases for mounting & holding are called rubber-coated mounting magnets and rubber-coated holding magnets. The rubber pot magnet(also called rubber-coated round base magnets) are the best strong magnet assemblies, which provide solutions of waterproof and rust-proof magnetic clamping to longer the service life. This rubber-coated neodymium pot magnet can be also made with an internal(female) threaded stud, external(male) threaded stem, and threaded screw socket on one non-magnetic side. Because of the soft rubber coated waterproof magnets, scratches are avoided on the surface of contacted objects. You can use the rubberized magnetic system as a magnetic base on cars and fridges for mounting or holding objects. Normal Types Of Rubber Coated Mounting Magnets rubber-coated mounting magnets can be made with internally threaded stud which suits to rubber coated magnetic hooks and rings rubber-coated mounting magnets can be made with an external threaded stud which suit bolts and screw flat rubber-coated mounting magnets can be made with threaded hole suit for flat surface installation. rubber-coated mounting magnets with handles that used as magnetic tools for various operations.
Rare earth samarium cobalt magnets, shorted as SmCo rectangular magnet, are a type of powerful permanent magnet made from the basic elements samarium and cobalt and other metal rare earth materials by mixing, melting, grinding, pressing and sintering. They come in various sizes and shapes, like disc,bar, ring, arc,block, etc.,. Similar to neodymium strong magnets, they belong to the rare earth magnet category, and tcan be classified as SmCo5 and Sm2Co17 according the composition ratios of samarium and cobalt. In comparison to neodymium rare earth magnets, although samarium cobalt magnets may not have as strong magnetic force, they possess two distinct advantages. Firstly, they operate effectively within a higher temperature range, and secondly, they exhibit greater resistance to corrosion. Due to these characteristics, large smco block magnets are commonly employed in applications that demand high operating temperatures, such as generators, pump couplings, sensors, electric motors, marine applications, as well as in the automotive, racing, aerospace, military, and food and manufacturing industries. SmCo rare earth magnets not only perform well at high temperatures but also maintain their magnetic properties even in temperatures below absolute zero (-273 degrees Celsius), making them popular for use in low-temperature applications.
REFRIGERATION SYSTEM THE CONTINUOUS WATER COOLING TECHNOLOGY MAKES THE HEAD OF THE TREATMENT MACHINE NOT GENERATE HIGH TEMPERATURE, AND GREATLY IMPROVES THE STABILITY OF THE OUTPUT POWER OF THE MAGNETIC WAVE RING, PERFECT BALANCED CONTINUOUS ENERGYOUTPUT RATE OF 7.0 TESLA, IN THE MARKET, THE BODY SLIMMING EQUIPMENTCAN BE CALLED A GOOD EFFECT. Function: 1. Good result -30 minutes treatment= 20000 workouts,increase 16% muscle and reduce 21% fat after about 2-4courses 2.Non-invasive, no side effects and painless 3. 7 Tesla High intensity-cover big skeletal muscles,and remodel its inner structure. 4. Patented cooling system-support long time operation 5. 2 magnetic applicators-break down fat deposits and increase muscular tone and strength 6.Targeting 5 body parts-abdomen, arms, hips, hamstring, thighs 7.Progressive step training-improve the feeling and effect of actual exercise 8. 5 training modes: HllT, Hypertrophy, Strength, Combo 1 HllT+ Hypertrophy , Combo 2Hypertrophy + strength
Permanent Magnet Compared with soft magnets, powerful permanent magnets (also called hard magnets) should have maximum Coercivity (HcB), high Remanence (Br), high magnetic energy product (BH) Max and wide hysteresis loop to ensure maximum magnetic energy storage and magnetic stability. Permanent magnets can be divided into ferrite, rare earth strong permanent magnets (samarium cobalt and NdEeB) and AlNiCo magnets. Sintered neodymium magnet is popular as the strongest permanent magnets in the world. Neodymium rare earth permanent magnets are widely used as the type of ordinary magnets(including disc, rings, blocks, arcs) and magnet assemblies(such as cup magnets, hook magnet...). Different Types of Permanent Magnet for Sale Neodymium Magnets Neodymium( NdFeB) magnet is the most sold and used rare earth industrial permanent magnet in the market, its magnetic energy product range from 33MGOe of N35 neodymium magnets to 53MGOe of N52 neodymium magnets. The maximum operating temperature of NdFeB magnets ranges from 80 â?? for the N series to 230 â?? for the AH series. Electroplating is a unique feature of permanent neodymium magnets, The processing performance of neodymium-iron-boron material is stronger than other types of magnets.
Our genuine gemstones and jewellery pieces are meticulously crafted into stunning designs. From dazzling diamonds and vibrant colored gemstones to intricate gold and silver jewellery, each piece reflects unparalleled beauty and sophistication. In addition to genuine gems and jewellery, we also offer a captivating range of Imitation Jewelry. Crafted with precision, our imitation jewelry replicates the charm of real gemstones and precious metals. These pieces are perfect for fashion-forward individuals who desire trendy and affordable accessories. Our commitment to quality ensures that both our genuine gems and jewellery, as well as imitation pieces, meet high standards. Whether you're looking for a statement necklace, elegant earrings, or a sparkling ring, our collection caters to diverse tastes and occasions. Explore our Gems and Jewellery collection to discover a world of elegance, where tradition meets contemporary design. Whether you're indulging in genuine luxury or embracing fashionable imitation pieces, our products are a testament to style, sophistication, and enduring beauty
The HMLH678 feed pellet maker is one of the indispensable pieces of equipment in the feed mill plant. It can be used alone or in the feed pellet production line. The feed pellet maker machine can make various animal feeds: Poultry feed, such as chicken feed, duck feed, goose feed, and bird feed; livestock feed, such as horse feed, pig feed Feed, and rabbit feed; ruminant feed, such as cattle feed, sheep feed, camel feed, etc. Herm machinery big capacity good price HMLH678 feed pellet maker is high precision gear drive ring die feed pellet machine, this machine has stainless steel conditioner, with frequency speed control, use â??SKFâ?? high-quality bearing, ensure high-efficiency, stable and low noise drive, can work alone with its electric cabinet. It can be used in all kinds of large and middle farms to make feed pellets to feed animals, for raw materials, it can be grain, such as wheat, corn, maize, etc., and some grass, and straw also can be applied to this machine, has a very broad application.
Guangzhou Hetay Equipment Co., Ltd. produces electric grinder, which is an electric tool for sanding with grinding wheel or grinding disc. The real charm of die electric grinding is that it can cooperate with multi-purpose abrasive tools to cut, trim, shape, grind and polish metal and non-metal materials. Its main abrasives are: whatsapp +8615915700551,skype:+8613535526245 (1) Cutting category: resin high-speed cutting sand sheet, cutting sand sheet with cloth net, emery cutting sheet. (2) Grinding: various special-shaped ceramic grinding heads, sand rings, sand drums, and page wheels with handles. (3) Polishing category: wool felt wheel, felt sheet, cloth wheel, wire brush, copper wire brush (polishing paste for various purposes). 2. Sanding machine It is mainly used for grinding narrow, complex and difficult-to-enter grinding parts, and is widely used in grinding die-casting products of bicycles, aluminum alloys and zinc alloys. Advantages: large cutting capacity, fast speed, convenient operation, small and difficult to grind the surface, which can be solved perfectly, and the operation is easy to be suitable for grinding at small angles and dead corners.
Item Name Sintered Metal Porous Disc Filter Material inconel 600 601 625 and other metals Filtering rate 0.2um 0.3um 0.5um 1um 3um 5um 10um 15um 20um 30um 50um 80um 100um Shape Round disc, Ring shape, and other special shape. Diameter Max diameter for round shape up to 500mm Thickness Min 1mm to Max 20mm Particle removal efficiencyï¼?Up to 99.99% Density rangeMetal edged process. Special size can be made as per the drawing or request. Application Stainless Steel Sintered Powder Metal Porous Disc Filter is widely used in Many excellent filtration solutions for specialized solving the problems in petrochemical, chemical engineering, coal chemical industry, silicon, lithium battery, metallurgy, pharmacy, food and nuclear power industry, etc. Titanium porous sintered disc&sheets are now popular used as gas diffusion layer in PEM Electrolyzer stacks.
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types. Highlight 3R signal regeneration Re-transmission Re-shaping Re-timing Multi-rate supports 1Gbps ~ 10Gbps Supports Loopback Test Supports ALS Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10Gbps CPRI: 2/3/4/5/6/7 1G/10G Ethernet SDH STM-4/16/64 The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
Crankcase Precision cast oxidation treated surface ofthe crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U" type "Nbr/Com/Buna N" material enhances the performance of the water pump and improves its service life. The plunger support guide ring ensures the coaxiality of the plunger, extending the service life of the water seal and plunger. Pump head assembly Selected stainless steel material, new andefficient structural design, high strength, no pores, long service life, andsafe operation. Reinforced 8-bolt fastening, 18mm, grade 12.9. Pommel Precision machined hard solid ceramicplungers, as well as thickened SST limit bolts, provide longer service life,better durability and applicability. Bearing Large tapered ball bearings ensure theconcentricity of the crankshaft connecting rod and ensure stable operation ofthe water pump. Crank axle Precision forging process and hardeningtreatment ensure the strength, service life, and durability of the crankshaft. Plunger connecting rod Super strong alloy material, splitstructure, higher load strength, longer service life, ensuring safe and stableoperation. Adual cylinder engine with strong horsepower and key start. Standard fitting Pipe coiler
Material: ZG35CrMo, ZG35, etc. Applicable equipment: rotary kiln, ball mill, mill Main materials: ZG45, ZG42CrMO Large girth gear is the main parts of rotary kiln, ball mill and dryer, needing to run for a long time. Its internal quality and installation quality directly affect the balance of the rotary kiln drive system, the stability of the rotary kiln operation, the service life of the kiln lining and the rotary kiln operation rate. Therefore, in the actual production of large girth gear product quality requirements are relatively high. Large girth gear is the core products of Tenfaye. The annual production can reach 500 sets, with a repurchase rate of 99%. Tenfaye has established long-term partnerships with CITIC Heavy Industries, Metso and MCC, etc .and has exported girth gear to the USA ,Finland, Korea, and Germany etc. Tenfaye has 17+ years steel casting experience for girth gear , we are large gear ring manufacture, and can provide the competitive price. To calculate the price based on the drawings of girth gear for ball mill or other machine.
Surface Sizing Agent is a synthetic copolymer of high molecular emulsifier and styrene ester monomer. It mixes well with starch and provides the starch coating with excellent cross-linking strength and hydrophobic property. It's featured by low consumption, free odor, low foaming, long foam inhibition period and excellent film forming, and it can significantly improve the water resistance capability and ring pressure strength of corrugated paper and cardboard paper. It is a sufficient substitute for internal sizing agent and has no maturation period. It is applicable to various types of surface sizing machines. Advantage: Low consumption, low sizing than internal (pulp) sizing and AKD type of surface sizing. The paper can be fully cured after reeling down. Strong water-resistant performance. Features: The cationic surface sizing agent needs some aluminum sulfate to perform well. The product series adapt to all high and low speed paper machines. Good Moisture Resistance, effectively prevent the reduction of RCT. Anionic the surface strength for culture for cultural paper.
Description: Light and Compact welded ISUP fits different needs. The small packing size takes off the heaviness of conventional ISUP. Rigid-Inflatable-Compact! Smaller and more portable! Compact iSUPs are measured not by their inflated size but by the entire length and weight of the gear when deflated and put into its transportation bag. Before folding, compact iSUPs typically fold in half down the midline, enabling them to fit into a backpack-style bag roughly half the size of a conventional iSUP bag. To help lighten the weight of the board, compact iSUPs are also manufactured from more premium, lightweight materials. Accessories are also modified to fit better in these smaller bags. Materials: Board: Drop stitch material Sidewall: PVC tarpaulin material EVA Info: Length Overall: 10'/305cm Width Overall: 33"/84cm Height: 6"/15cm Weight: 23.1lbs/10.5kg Max. No. Passengers: 1 Max. Load: 286lbs/130kg No. of Chambers: 1 Welding Tape: yes Fins: 2 D-rings: 7 Recommended Pressure(PSI): 15 Packmass(CM): 63*33*30 Equipment: Backpack, SUP Paddle, Leash, Fin, High-pressure hand pump, Repair kit, Owners manual, Box
PRODUCT DESCRIPTION: Restores lost Refrigerant & Oil additives packaged to A/C system, Patented formulation with advanced chemicals developed for NASA USA; Eliminates moisture and neutralize acid from the system; Reduce cabin humidity and drier air improve comfort in car; Advanced seal rejuvenating ingredient to cure the hardened o-rings and prevent leaking. Providing better flow & improving cooling performance; Special polarized & modified power molecules clean and protect the system free from oil sludge, moisture and acid formation to extend service life of the whole A/C system. PRODUCT BENEFITS: Revitalizes A/C cooling capacity, colder fast. Stops leaks and conditions seals. Extends A/C life. No Tools Required, charging easy and fast. DIRECTIONS FOR USE: 1.Use For DIFM. Find A/C low-side port and remove cap. It is usually on a larger diameter metal tube that runs between the evaporator (dashboard side of engine) and compressor (on engine). 2.Start engine, turn A/C on MAX Cool with vents on high. 3.Shake the can well. 4.Hold can upside down and push Direct Charge connector onto low-side port for 30 seconds or until the can is empty. 5.Replace cap on low-side port.
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Reel Type Trolling Reel Model INT12VI Line Capacity (lb-yds.) 1510/10 1030/12 880/15 Fishing Type Saltwater Fishing Line Retrieve/Crank (in.) 53" Max Drag (lbs.) 15 MPN 1370774 Fish Species All Saltwater Weight (oz.) 31 oz Brand Penn Ball Bearings 5 Color Gold Braid Capacity (yd/lb) 985/40 840/50 700/65 Anti-Reverse Feature Multi-Stop Reel Size 12 Hand Retrieve Right Gear Ratio 6.75:1 Drag Style Lever Drag Number of Pieces 1 Features Aluminum Spool, Anti-Reverse, Near-shore, Off-shore, Single Speed, Stainless steel main and pinion gears, Line Capacity Rings Country/Region of Manufacture United States Material Aluminum, Stainless Steel Product Line Penn International VI Department Unisex Pre-Spooled No UPC 031324166981
Product Name : 717 Bindex Ecology Lever Arch File Specification : -1350gsm paperboard -Slide in plate mechanism -Mechanism capacity 75mm -Mica + label -Non blue cyber -Compressor bar -Metal L shoe -Finger ring Packing : -50pcs/ctn -Available in Black and Blue Price : Slide in Plate --> 21,000 x 0.80 USD = 16,800.00 USD Packaging : -Seal king plastic/pcs For your information: 1. Our price is FOB price, Jakarta, Indonesia, Port Tanjung Priok Jakarta. 2. Payment term is 30% deposit and 70% balance before shipment via TT. 3. Delivery time is ±30 business days since received deposit for 1x20 container order. 4. The price quoted is for Bambi standard products. 5. No MOQ for Bambi standard products. 6. OEM welcome with MOQ and the prices are different from standard products (please contact us for further information). 7. Product prices are subject to change at any time. 8. This price is not included other cost (freight cost, insurance, and other costs if needed).
Specification : -1150gsm paperboard -Slide in plate mechanism -Mechanism capacity 75mm -Mica + label -Non blue cyber -Compressor bar -Metal L shoe -Finger ring Packing : -50pcs/ctn -Available in Black and Blue Packaging : -Seal king plastic/pcs Price : Slide in Plate --> 21,000 X 0.78 USD = 16,380.00 USD For your information: 1. Our price is FOB price, Jakarta, Indonesia, Port Tanjung Priok Jakarta. 2. Payment term is 30% deposit and 70% balance before shipment via TT. 3. Delivery time is ±30 business days since received deposit for 1x20 container order. 4. The price quoted is for Bambi standard products. 5. No MOQ for Bambi standard products. 6. OEM welcome with MOQ and the prices are different from standard products (please contact us for further information). 7. Product prices are subject to change at any time. 8. This price is not included other cost (freight cost, insurance, and other costs if needed).
Type: 1010 Bambi PVC Lever Arch File Product specifications: - made from 1350 gsm paperboard - laminated with 0.13mm PVC material - available in several colors - equipped with mica pocket + label, compressor bar, finger ring, rado slots, & double layers at bottom - OEM welcome on label - available in fixed mechanism & slide in plate mechanism Packing: 50pcs/ctn -> for slide in plate mechanism 1.15 USD -> slide in plate mechanism Total amount in 1 x 20" FCL - slide in plate mechanism -> 21,000 pcs x 1.15 USD = 24,150.00 USD For your information: 1. Our price is FOB price, Jakarta, Indonesia, Port Tanjung Priok Jakarta. 2. Payment term is 30% deposit and 70% balance before shipment via TT. 3. Delivery time is ±30 days since received deposit for 1x20 container order. 4. The price quoted is for Bambi standard products. 5. No MOQ for Bambi standard products. 6. OEM welcome with MOQ and the prices are different from standard products (please contact us for further information). 7. Product prices are subject to change at any time. 8. This price is not included other cost (freight cost, insurance, and other costs if needed).
