Place of origin: guangdong, china (mainland) Brand name: egood Model number: type 65, 80, 100 Open style: folding Position: interior Surface finishing: finished Type: movable partition Door material: aluminum alloy Track: anodized aluminum 6063-t6 Carrier materials: imported pom Main frame: anodized aluminum 6063-t6 Carrier over load: 225kg Panel thickness: 65, 80, 100mm Sound insulation: max 45db Height: max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: melamine, fabric, leather, hpl, wall paper ect. 1)thickness panel:65mm, 80mm, 100mm, height from 2meter to 17meter 2)top supported without floor track or guide 3) clear anodized extruded aluminum tracks and frames, customized powder coated color are available 4) rock wool infill, with top and bottom retractable mechanism in the middle and mdf, plywood or plaster base board on both side 5) sound insulation coefficien :stc 32db to 53 db, astm standard of acoustic tested in hongkong. 6) available in wide range of finishes. 7) fast delivery and rich experiences in oversea project installation guide & supervision. -
Place of origin: guangdong, china (mainland) Brand name: egood Model number: type 65, 80, 100 Open style: folding Position: interior Surface finishing: finished Type: movable partition Door material: aluminum alloy Track: anodized aluminum 6063-t6 Carrier materials: imported pom Main frame: anodized aluminum 6063-t6 Carrier over load: 225kg Panel thickness: 65, 80, 100mm Sound insulation: max 45db Height: max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: melamine, fabric, leather, hpl, wall paper ect. 1)thickness panel:65mm, 80mm, 100mm, height from 2meter to 17meter 2)top supported without floor track or guide 3) clear anodized extruded aluminum tracks and frames, customized powder coated color are available 4) rock wool infill, with top and bottom retractable mechanism in the middle and mdf, plywood or plaster base board on both side 5) sound insulation coefficien :stc 32db to 53 db, astm standard of acoustic tested in hongkong. 6) available in wide range of finishes. 7) fast delivery and rich experiences in oversea project installation guide & supervision. -
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection. Features: Supreme adhesion integrates with the substrate forever with special patent formula Suitable for various substrates enables to lower resource waste massively and save the cost and time Unique operation craft of wet treatment,free from primer,no need of heat melt Size Available Width-3.28ftï¼?1m Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m) Thickness- N(1.2mm,1.5mm,2mm) G (2mm,3mm,4mm) Packaging,storage and shipping Product is packed into rolls with plastic woven bag Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2 TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
Features: 1> Office high partition wall is modernized decoration style.it can separate the space speedly and conveniently.and it has sound insulation and heat insulation and fireproof function; 2> the office high partition wall is made from high density s/s frame, special made rubber, excellent sound insulation cotton and finish board etc.the finish board is flat and hard; 3> the office high partition wall can be stored in may different ways; 4> it doesn't need track on the floor, we only hang the track on the ceilings and it can be at the same plane with the ceiling decoration.it won't affect the whole decoration style; 5> around the board, there is sound insulation rubber, it can help to insulate the sound entering; Finishes: there are wide of range face finishes are available :melamine faced MDF or plywood, fabric, carpet, fabric, artificial, leather,wood veneer, high pressure laminate,acoustic panel,white board ect., panels can also be supplied unfinished for field decoration,standard frame color is clear anodized aluminum,custom powder coating colors are available. BUNGE movable partition wall is made of high quality anodized aluminum frame with environmentally composite materials.the panels move on a ceiling track with no requirement of floor guides or rails.,the panel has a standard thickness of 65 mm ,85 mm and 100 mm,and a width up to 1230 mm.Maximum height can reach 17 meters tall. Common Applications: 1.studios, recording rooms, listening rooms, rehearsal rooms and more professionally interspace timbre projects. 2.theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location. 3.meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects. 4.air-port, railways, bus-stops, workshops and more noise reduction projects. About us: Guangzhou Bunge Building Decoration Engineering Co.,Ltd is a professional company in manufacturing Movable Partitions.It also artistically designs and carefully does research and development,.The company has adopted the advance partition technology of USA,Germany and Denmark.We have professional staff with more than 10 years of experience in design,production and installation.
MDF is wood fibre based panels. The unique feature of MDF is that it has a homogeneous construction without layers. MDF an acronym for Medium Density Fibre Boards. All TESA Fibre boards are being manufactured with Hard wood so automatically the density of our product become better than other products available in market. Our Boards are having best routing characteristics due to special German Technology used to press the boards in a way so that compression pressure can reach to its core also thus making densified core which is required for high quality routing. We also produce in E0, E1 & E2 Grade. THE KEY APPLICATION AREAS OF MDF: 1. Shoe Heel & lasts 2. Laminate Flooring Substrate 3. Embossed Panels for Wall Cladding 4. Kitchen Shutters 5. Can be use in door manufacturing 6. Decorative Display Panels 7. Railway Cushion Base 8. Automotive Internal panels THE KEY APPLICATION AREAS OF MDF : 1. Decorative Wall cladding in routed wave form or Jalies 2. Wooden Handcraft items/Toys & Puzzles 3. Educational Tools/Aids & casing for scientific instruments/Model making for civil construction 4. Exhibition Stalls & Display/POP 5. Automotive Interior cladding & paneling 6. Photolamination substrate 7. Routing & carving of Trophies/Gift items 8. Routed Shutters for Kitchens & Wardrobes with membrane or polished surface. MDF PRODUCT RANGE SPECIFICATION: Product Variants : Interior Grade MDF Panel Size : 2440mm (8ft) x 1220mm (4ft) Thicknesses : 1.9mm, 2.3mm, 2.5mm, 3mm, 3.6mm, 4mm, 4.75mm, 5.5mm, 7.5mm, 8mm, 9mm, 11mm, 12mm, 15mm,17mm, 18mm &25mm Panel Size : 1830mm (6ft) x 1220mm (4ft) Thicknesses : 2.3mm, 4.75mm & 5.5mm Product Variants : Exterior Grade MDF Panel Size : 2440mm (8ft) x 1220mm (4ft) Thicknesses : 3.6mm, 4.0mm, 5.5mm, 8mm, 11mm, 12mm, 17mm, 18mm & 25mm
Tempered Glass is also called Toughened Glass in some places. Its Intensity is about 5 times as the common Float Glass. Glass Sheet would become thousands of small glass pieces without sharp tips once it is broken. That can less the possibility to hurt people. So tempered glass is also one of the Safety Glass. It spends about 45 mins for the furnace to warm up and re-start to temper glass.We have strict quality control on the glass flatness and the glass curve /bent is within limits. Besides,our glass can also do heat soaked test if required to less the possibility of its self-bombing. The processes of Silk Screen Print and Ceramic frit are also available. Two or more sheets of Tempered Glass can be laminated to be Laminated Glass or be combined to be IGU. If the glass is used to produce Laminated Glass, its flatness must be within control to avoid bubbles between two or more sheets of glass laminated. Tempered Glass can be processed with Hole, Cutouts, Polished Edges or in Irregular Shape. Besides, it can also be Heat Soaked to less the possibility of Self-Bomb. And it is popular used as Door & Window Glass, Pool Fence Glass,Balustrade Glass, Balcony Glass,Bathroom Glass, Shower Door Panel, Floor Glass, Sliding Door glass,Furniture Glass,Table Glass etc. Tempered Glass with Polished Edges sells very well in the market Size: Max. 2440 x3660 mm Thickness: 3mm-19mm Certificates: AS/NZS 2208: 1996, CE, ISO 9002 Glass: Float Glass, Annealed Glass, Patterned Glass, Low E Glass, Low Iron Glass Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc Glass Process: Hole, Cutout, Heat Soaked, Polished Edges, Ceramic Frit Glass, Irregular Shape Package: Plywood End Cap, Plywood Crate, Metal End Cap,Carton Package, Pallet Etc. Plywood End Cap Plywood is one of the materials free of fumigation. It is safe to use the package with the design " End Cap" to deliver the glass. Besides,it is also easier and quicker for operators on the floor to unpack the glass on the trolley. Naked Package Naked Package take less trouble to the customers to handle the package material. A frame is made of metal.It is easy to be disassembled by tool and stocked on the corner or some place else. Metal End Cap Metal End Cap is another design for package.Metal material is welded together, then it is not easy for the end cap to be distorted during the transportation and damage the glass especially there is storm on the ocean. Carton Package The specification of the glass on some part are standard in some countries, such as on the Door, Window etc.Mass production in advance and wholesale in the shopping mall become workable on them.
15 cm double-axis angle machine, two one-centimeter thick active splint, you can clip within 14 cm of the edge, metal sideband, stainless steel sideband, flat aluminum can be used, 1.0 or less thickness sideband can be used, fixed the use of the table on the top of the effect is particularly good, folding machine at the top with buttons, fastening plywood and heel rotation distance, with a long time will not be deformed, is the metal luminous words necessary tools, 15 cm double angle machine has 6 kg weight, use solid! processing angle 30-150 degrees! Stainless steel word production process: Stainless steel words are all stainless steel, this metal is mainly installed in the interior, and more high-end, but the requirements for the relatively high technology, especially the welding of this one. Here i would like to talk about the production of stainless steel word steps: Step 1: panel production, usually flat, there are three-dimensional, three-dimensional, spherical and so irregular panels, spherical and other highlights is to use the plate slowly knock, the other pattern is engraving machine engraved of. Step two: the edge of the very simple, with a slotting machine first slot, and then facing the panel to slot, or hand-held slot machine to slot, where welding where the slot, it is convenient, but for stainless steel edge of the knife when the wear and tear is relatively fast, nor too flexible, there are certain limitations, narrow places may not be able to slot. Step three: that is, welding this one is to see the welding master used a welding tool, and some with a soldering iron, and some use of argon arc welding, the funds allowed to use laser welding, are very good choice. Step four: the floor is installed on it. -
A round mouth pliers: gripper length 10cm, cylindrical diameter 1cm, you can process a variety of high edge, for the previous 5-inch small handle, now switch to 7-inch handle, more in line with hand type, very easy to use, can also assist welding! Pliers handle length 11cm, two handles the widest position of 5.5cm, if in doubt please contact customer service and then shoot! Stainless steel word production process: Stainless steel words are all stainless steel, this metal is mainly installed in the interior, and more high-end, but the requirements for the relatively high technology, especially the welding of this one. Here i would like to talk about the production of stainless steel word steps: Step 1: panel production, usually flat, there are three-dimensional, three-dimensional, spherical and so irregular panels, spherical and other highlights is to use the plate slowly knock, the other pattern is engraving machine engraved of. Step two: the edge of the very simple, with a slotting machine first slot, and then facing the panel to slot, or hand-held slot machine to slot, where welding where the slot, it is convenient, but for stainless steel edge of the knife when the wear and tear is relatively fast, nor too flexible, there are certain limitations, narrow places may not be able to slot. Step three: that is, welding this one is to see the welding master used a welding tool, and some with a soldering iron, and some use of argon arc welding, the funds allowed to use laser welding, are very good choice. Step four: the floor is installed on it. -
Metal word mini bending machine: three 1cm diameter cylinder, two bending handle, the use of more convenient, plus light type, while welding edge bending, folding time can not fold too thick sideband is generally 0.6 side of the side the effect is better! Stainless steel word production process: Stainless steel words are all stainless steel, this metal is mainly installed in the interior, and more high-end, but the requirements for the relatively high technology, especially the welding of this one. Here i would like to talk about the production of stainless steel word steps: Step 1: panel production, usually flat, there are three-dimensional, three-dimensional, spherical and so irregular panels, spherical and other highlights is to use the plate slowly knock, the other pattern is engraving machine engraved of. Step two: the edge of the very simple, with a slotting machine first slot, and then facing the panel to slot, or hand-held slot machine to slot, where welding where the slot, it is convenient, but for stainless steel edge of the knife when the wear and tear is relatively fast, nor too flexible, there are certain limitations, narrow places may not be able to slot. Step three: that is, welding this one is to see the welding master used a welding tool, and some with a soldering iron, and some use of argon arc welding, the funds allowed to use laser welding, are very good choice. Step four: the floor is installed on it. -
A generation of flat nose pliers: jaws long 10CM, square column diameter 1cm, you can process a variety of high edge, for the previous 5-inch small handle, now switch to 7-inch handle, more in line with hand type, very easy to use, can also assist welding! Pliers handle length 11CM, two handles the widest position of 5.5cm, if in doubt please contact customer service and then shoot! Stainless steel word production process: Stainless steel words are all stainless steel, this metal is mainly installed in the interior, and more high-end, but the requirements for the relatively high technology, especially the welding of this one. Here I would like to talk about the production of stainless steel word steps: Step 1: panel production, usually flat, there are three-dimensional, three-dimensional, spherical and so irregular panels, spherical and other highlights is to use the plate slowly knock, the other pattern is engraving machine engraved of. Step two: the edge of the very simple, with a slotting machine first slot, and then facing the panel to slot, or hand-held slot machine to slot, where welding where the slot, it is convenient, but for Stainless steel edge of the knife when the wear and tear is relatively fast, nor too flexible, there are certain limitations, narrow places may not be able to slot. Step three: that is, welding this one is to see the welding master used a welding tool, and some with a soldering iron, and some use of argon arc welding, the funds allowed to use laser welding, are very good choice. Step four: the floor is installed on it. Pliers handle length 11CM, two handles the widest position of 5.5cm, if in doubt please contact customer service and then shoot. -
Tempered glass--as/nzs 2208: 1996, ce, iso 9002 Tempered glass is also called toughened glass in some places. Its intensity is about 5 times as the common float glass. Glass sheet would become thousands of small glass pieces without sharp tips once it is broken. That can less the possibility to hurt people. So tempered glass is also one of the safety glass. It spends about 45 mins for the furnace to warm up and re-start to temper glass.We have strict quality control on the glass flatness and the glass curve /bent is within limits. Besides, our glass can also do heat soaked test if required to less the possibility of its self-bombing. The processes of silk screen print and ceramic frit are also available. Two or more sheets of tempered glass can be laminated to be laminated glass or be combined to be igu. If the glass is used to produce laminated glass, its flatness must be within control to avoid bubbles between two or more sheets of glass laminated. Tempered glass can be processed with hole, cutouts, polished edges or in irr egular shape. Besides, it can also be heat soaked to less the possibility of self-bomb. And it is popular used as door & window glass, pool fence glass, balustrade glass, balcony glass, bathroom glass, shower door panel, floor glass, sliding door glass, furniture glass, table glass etc. Tempered glass with polished edges sells very well in the market Size: max. 2440 x3660 mm Thickness: 3mm-19mm Certificates: as/nzs 2208: 1996, ce, iso 9002 Glass: float glass, annealed glass, patterned glass, low e glass, low iron glass Glass color: clear, low iron, grey, f-green, bronze, blue etc Glass process: hole, cutout, heat soaked, polished edges, ceramic frit glass, irregular shape Package: plywood end cap, plywood crate, metal end cap, carton package, pallet etc. -
Main features: 1.The main structure is welded by national standard steel, high stability and no deformation. 2.The operating system is accurately controlled by PLC to achieve the high precision sawing size and automatic stacking, reduce the labor's intensity. 3.The main electric units adopt famous brand Omron, Schneider, safety and reliable. 4.The machine adopts high precision wear-resistance guide rails and infrared positioning, diagonal error of plywood can be less than 0.5mm. 5.The machine adopts pre-load device, just need two workers, one work shift can produce 3000-4000Pcs 16mm plywood. 6.It has the automatic saw waste remover device. Product Application: This product is suitable for plywood board, cutting edge technology is manual cutting to a great leap forward of automatic cutting,compared with ordinary hand saws, the machine has five features: precision, high efficiency, energy saving, provincial industry and environmental protection. The machine adopts PLC intelligent design, saw blade speed can be adjusted automatically according to cutting condition,no need to stop any saw blades,at the same time realize the automation of stacking and leftover material removal, safe and convenient operation, smooth running, low noise. Its high quality automatic saw cut, board face is smooth, no dozen edge, coastal zone size standards. Highlight the native: intelligent cutting, smooth running safe, accurate and efficient. Service 1. We supply whole production line according to customer's demand, fully/semi-automatic avaliable. 2. One year guarantee of machines, and lifetime after-sales service and information consult. 3. Our technical people have much experience in installation, debugging, run testing all kinds of machine in different countries. 4. Our company attends most of the international exhibitions every year, and will visit the local customers to collect customer's feedback and suggestions on our machines, then we can upgrade our machines continuously.
Product Name: 18mm black film faced plywood, furniture grade plywood, competitive price of shuttering plywood Face / Back: Phenolic film Grade: AA grade / BB grade Core: Poplar core / Combi core / Hardwood core / Pine core / Birch core Glue: MR glue, WBP glue , Phenolic glue Thickness: 4-28mm (normal thickness : 12mm , 15mm, 18mm, 21mm) Specification: 1220mmX2440mm , 1250mmX2500mm , 915mmX1830mm , 610mmX2440mm , 610mmX2500mm Moisture Content: 8-14% Density: 530-780kg/m3 Description: The clients can avail from us high grade Film Faced Plywood. The Film Faced Plywood we offer is appreciated widely for its excellent properties and is suitable for use in varied construction applications. The Film Faced Plywood that we offer is coated with high quality film that ensures its hardness and damage resistance. The clients can avail the Film Faced Plywood at marketâ??s leading price from us. 1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed 2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing 3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould) 4. Solves the problems of leaking and rough surface during constructing process 5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat 6. Realizing a higher economic profits. construction plywood Rocplex film faced plywood, construction plywood, waterproof plywood Usages: Can be widely used for House building, Road Construction, Big Concrete Projects, bridge beams,etc Edge Sealing Panel edges are sealed against moisture absorption with acrylic paint. Tolerance �?±0.5mm or available for order Quality Control External plywood quality control are conducted in accordance to CE certificate and ISO9001:2000 Packing Package with 3mm plywood, jointed with the galvanized steel belt, and can be assembled or disassembled on site. It is seaworthy package. Rocplex film faced plywood, construction plywood, waterproof plywood
Product Name: Rocplex film faced plywood, construction plywood, waterproof plywood Face / Back: Phenolic film Grade: AA grade / BB grade Core: Poplar core / Combi core / Hardwood core / Pine core / Birch core Glue: MR glue, WBP glue , Phenolic glue Thickness: 4-28mm (normal thickness : 12mm , 15mm, 18mm, 21mm) Specification: 1220mmX2440mm , 1250mmX2500mm , 915mmX1830mm , 610mmX2440mm , 610mmX2500mm Moisture Content: 8-14% Density: 530-780kg/m3 Description: The clients can avail from us high grade Film Faced Plywood. The Film Faced Plywood we offer is appreciated widely for its excellent properties and is suitable for use in varied construction applications. The Film Faced Plywood that we offer is coated with high quality film that ensures its hardness and damage resistance. The clients can avail the Film Faced Plywood at marketâ??s leading price from us. 1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed 2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing 3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould) 4. Solves the problems of leaking and rough surface during constructing process 5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat 6. Realizing a higher economic profits. construction plywood Rocplex film faced plywood, construction plywood, waterproof plywood Usages: Can be widely used for House building, Road Construction, Big Concrete Projects, bridge beams,etc Edge Sealing Panel edges are sealed against moisture absorption with acrylic paint. Tolerance �?±0.5mm or available for order Quality Control External plywood quality control are conducted in accordance to CE certificate and ISO9001:2000 Packing Package with 3mm plywood, jointed with the galvanized steel belt, and can be assembled or disassembled on site. It is seaworthy package. Rocplex film faced plywood, construction plywood, waterproof plywood
Product Name: Brown film faced plywood, construction plywood, waterproof plywood Face / Back: Phenolic film Grade: AA grade / BB grade Core: Poplar core / Combi core / Hardwood core / Pine core / Birch core Glue: MR glue, WBP glue , Phenolic glue Thickness: 4-28mm (normal thickness : 12mm , 15mm, 18mm, 21mm) Specification: 1220mmX2440mm , 1250mmX2500mm , 915mmX1830mm , 610mmX2440mm , 610mmX2500mm Moisture Content: 8-14% Density: 530-780kg/m3 Description: The clients can avail from us high grade Film Faced Plywood. The Film Faced Plywood we offer is appreciated widely for its excellent properties and is suitable for use in varied construction applications. The Film Faced Plywood that we offer is coated with high quality film that ensures its hardness and damage resistance. The clients can avail the Film Faced Plywood at marketâ??s leading price from us. 1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed 2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing 3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould) 4. Solves the problems of leaking and rough surface during constructing process 5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat 6. Realizing a higher economic profits. construction plywood Rocplex film faced plywood, construction plywood, waterproof plywood Usages: Can be widely used for House building, Road Construction, Big Concrete Projects, bridge beams,etc Edge Sealing Panel edges are sealed against moisture absorption with acrylic paint. Tolerance �?±0.5mm or available for order Quality Control External plywood quality control are conducted in accordance to CE certificate and ISO9001:2000 Packing Package with 3mm plywood, jointed with the galvanized steel belt, and can be assembled or disassembled on site. It is seaworthy package. Rocplex film faced plywood, construction plywood, waterproof plywood
Rocplex film faced plywood Athena Product Name: Rocplex film faced plywood, construction plywood, waterproof plywood Face / Back: Phenolic film Grade: AA grade / BB grade Core: Poplar core / Combi core / Hardwood core / Pine core / Birch core Glue: MR glue, WBP glue , Phenolic glue Thickness: 4-28mm (normal thickness : 12mm , 15mm, 18mm, 21mm) Specification: 1220mmX2440mm , 1250mmX2500mm , 915mmX1830mm , 610mmX2440mm , 610mmX2500mm Moisture Content: 8-14% Density: 530-780kg/m3 Description: The clients can avail from us high grade Film Faced Plywood. The Film Faced Plywood we offer is appreciated widely for its excellent properties and is suitable for use in varied construction applications. The Film Faced Plywood that we offer is coated with high quality film that ensures its hardness and damage resistance. The clients can avail the Film Faced Plywood at marketâ??s leading price from us. 1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed 2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing 3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould) 4. Solves the problems of leaking and rough surface during constructing process 5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat 6. Realizing a higher economic profits. construction plywood Rocplex film faced plywood, construction plywood, waterproof plywood Usages: Can be widely used for House building, Road Construction, Big Concrete Projects, bridge beams,etc Edge Sealing Panel edges are sealed against moisture absorption with acrylic paint. Tolerance ±0.5mm or available for order Quality Control External plywood quality control are conducted in accordance to CE certificate and ISO9001:2000 Packing Package with 3mm plywood, jointed with the galvanized steel belt, and can be assembled or disassembled on site. It is seaworthy package. Rocplex film faced plywood, construction plywood, waterproof plywood
Description A 43-inch interactive touch screen advertising display is a versatile and engaging solution for advertising and information dissemination. It features a user-friendly touchscreen interface that allows customers or passengers to interact with your content. This display unit comes equipped with an Android digital signage player, making it easy to manage and update your advertising content remotely. For indoor use, this floor-type Android digital signage player is designed to stand securely on the floor, making it ideal for malls, retail stores, lobbies, and other indoor spaces. It offers a sleek and modern design that blends seamlessly with its surroundings. YCZX 43 inch interactive touch screen advertising is a new one-touch solution for many scenes such as shopping mall, cinema and exhibition halls. you can choose Windows and or Android system to manage multiple advertising player in the network terminal.In addition, the advertising machine has split screen playback, switching multiple languages, timing switches and other functions.Convenient for bulk replacement of advertising content and timed playback. Guangzhou YCZX is a professional smart board and advertising player manufacturer with 10 years OEM manufacturing experience, 4 producing lines, 1400 ã?¡ office& showroom, 2300ã?¡ factory, 3000ã?¡warehouse, that is how we provide high-quality smart board interactive display products to our customers. We also have our professional quality interactive monitor display control and after sale team, we will try our best to satisfy your demand. YCZX offers high quality products with best solution.
Case Binding Machines ,Case Making Machines, Manufactures case binding machines, automatic feeders, automatic lamination machine, Case Maker Automatic Machine, Semi-automatic case maker, Edge Squaring Machine, Joint Forming Machine, Nipping Machine, Corner Cutting Machine, Case Corner Rounding Machine, Single Clamp Perfect Binding Machine, book binding machines. Mark Manufacturers, Heavy duty case binding machine, most reliable machine Manufacturers Bangalore Karnataka, India http://www.indobound.com Case Binding Machine, Case Binding, Case Binder, Case Making Machine, Case Making, Case Making Machine, Case Binding Machine Manufacturer, Book Binding Machine, Binding Machine, Bookbinding Machines, , automatic lamination machine, Case Maker Automatic Machine, Semi-automatic case maker, Edge Squaring Machine, Joint Forming Machine, Nipping Machine, Corner Cutting Machine, Case Corner Rounding Machine, Single Clamp Perfect Binding Machine, Mark Bookbinding, Mark Case Binding, Hard Bound Book, Hard Bound Books, Hard Case Binding, Case Maker, Case maker, Case, Binding, Machines, Case Binding Machines, case binding machine for diary, case binding machine for file, case binding machine for clip board, case binding machine for hard bound book, case binding machine for hard bound notebook, case binding machine for hard cover, case binding machine manufacturer in India, case binding machine manufacturer from Bangalore Karnataka, India Case Binding Machines manufacturers in Bangalore Case Binding Machine Supplier in bangalore Case Making Machine, Book Binding Machine, corner cutting machine, edge squaring machine, joint forming machine, nipping machine, Book Rounding Machine, Case Maker, Automatic Case Maker, Semi-Automatic case maker, Round Corner Cutting Machine, Special Machines for your Requirement, SPM Machine manufacturers, creasing machines, pinning machine, clamp perfect binding machine Manufacturers Bangalore Karnataka
Pneumatic slotting machine: Pneumatic slotting machine about 20 kg weight, with a pneumatic drive slotted, pneumatic material, the use of very safe, very convenient Equipped with speed angle grinder, double compass slider, manual double folder feeder, slot is very convenient, with the word row hole hole software, the use of more convenient Slotting machine with speed control angle grinder can be used with a variety of blade processing all kinds of sidebelt, tungsten steel blade can open metal sideband, stainless steel sideband will not be black, tungsten steel blade must be transferred to 1000 rpm / Minute (speed adjustable angle grinder 2 files), alloy blade can be used to open aluminum and aluminum coil, the use of angle grinding machine is best not to adjust too fast, easy to fly out of the aluminum side of the waste, Protect the blade! Slotting machine is the depth of the screw bar (fine-tuning), fine-tuning, then it is not easy to damage the blade, you can also better operate the slot machine, better adjust the slot depth! Resin luminous characters are now relatively high prices in the industry, and more high-end a luminous characters, many big brands are using resin words, the following words about the production of resin word: Step one: Now the popular resin word is the first floor and the first edge of the first welding, the floor is carved with a plasma, and then the edge of the welding on it. Step 2: is to be in the top of the word pad a layer of transparent acrylic, transparent acrylic carved out of the floor is slightly smaller, so that you can just set into the set before the acrylic get a few small pieces of acrylic good Position, set a location, stick on the edge, and then to the pad of acrylic, so you can keep parallel, but also easy to do the word, acrylic pad up after the must ensure that the seal, or else the resin will flow to the following. Step three: is the resin panel, and now the domestic resin is 3: 1 saturated resin, paste is more imported, uniform light agent is mostly concentrated, so that the proportion of resin is better control. Resin ratio is like this, with a plastic pot into the resin A (3: 1 resin, large bottles of 6 kg), and then add a light agent (see the mix after the light to see the effect of light, the amount of added, probably With the resin 3% -5%, different amount of uniform agent plus the amount is not the same), and then add the color paste, the proportion of the same color and the proportion of the same agent 3% -5%, and finally add the curing agent (The ratio of the curing agent to the resin is 1: 3). Note: resin mixing time must be uniform, 8 kg loaded each step need to stir for more than 15 minutes, the greater the weight, the longer the mixing time, there are resin when the room must be kept in a clean room, or resin There will be black spots, unsightly, when the night will be particularly evident. -
Desktop electric slotting machine: desktop electric slot machine machine weighing about 20 kg, with a speed angle grinder, double compass slider, manual double folder feeder, slot is very convenient, with the word row hole hole software, use It is more convenient Slotting machine with speed control angle grinder can be used with a variety of blade processing all kinds of sidebelt, tungsten steel blade can open metal sideband, stainless steel sideband will not be black, tungsten steel blade must be transferred to 1000 rpm / Minute (speed adjustable angle grinder 2 files), alloy blade can be used to open aluminum and aluminum coil, the use of angle grinding machine is best not to adjust too fast, easy to fly out of the aluminum side of the waste, Protect the blade! Slotting machine is the depth of the screw bar (fine-tuning), fine-tuning, then it is not easy to damage the blade, you can also better operate the slot machine, better adjust the slot depth! Resin luminous characters are now relatively high prices in the industry, and more high-end a luminous characters, many big brands are using resin words, the following words about the production of resin word: Step one: Now the popular resin word is the first floor and the first edge of the first welding, the floor is carved with a plasma, and then the edge of the welding on it. Step 2: is to be in the top of the word pad a layer of transparent acrylic, transparent acrylic carved out of the floor is slightly smaller, so that you can just set into the set before the acrylic get a few small pieces of acrylic good Position, set a location, stick on the edge, and then to the pad of acrylic, so you can keep parallel, but also easy to do the word, acrylic pad up after the must ensure that the seal, or else the resin will flow to the following. Step three: is the resin panel, and now the domestic resin is 3: 1 saturated resin, paste is more imported, uniform light agent is mostly concentrated, so that the proportion of resin is better control. Resin ratio is like this, with a plastic pot into the resin A (3: 1 resin, large bottles of 6 kg), and then add a light agent (see the mix after the light to see the effect of light, the amount of added, probably With the resin 3% -5%, different amount of uniform agent plus the amount is not the same), and then add the color paste, the proportion of the same color and the proportion of the same agent 3% -5%, and finally add the curing agent (The ratio of the curing agent to the resin is 1: 3). Note: resin mixing time must be uniform, 8 kg loaded each step need to stir for more than 15 minutes, the greater the weight, the longer the mixing time, there are resin when the room must be kept in a clean room, or resin There will be black spots, unsightly, when the night will be particularly evident. -
