Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the co ndition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable. Conditions For The Usage 1. Terminal poles/towers; 2. Corner poles/towers; 3. Dead-end poles/towers; Intensity According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied. Select Chart Model Grip(KN) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight(KG) Color ONZ-60-* * 60 1900 1500 2.9 Yellow ONZ-70-* * 70 2000 1600 3.5 Yellow ONZ-80-* # 80 2200 1700 4.2 Yellow ONZ-90-* # 90 2400 1800 4.3 Yellow ONZ-100-* # 100 2500 1900 4.5 Yellow ONZ-120-* # 120 2600 2000 5.0 Yellow Note: representing the outer diameter of the optical cable (mm).
Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable. Conditions For The Usage 1. Terminal poles/towers; 2. Corner poles/towers; 3. Dead-end poles/towers; Intensity According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied. Select Chart Model Grip(KN) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight(KG) Color ONZ-60-* * 60 1900 1500 2.9 Yellow ONZ-70-* * 70 2000 1600 3.5 Yellow ONZ-80-* # 80 2200 1700 4.2 Yellow ONZ-90-* # 90 2400 1800 4.3 Yellow ONZ-100-* # 100 2500 1900 4.5 Yellow ONZ-120-* # 120 2600 2000 5.0 Yellow Note: representing the outer diameter of the optical cable (mm).
Vibrating conveyor is a king of vibrator to vibrate the trough, so that the tank material in a certain direction of sliding or throwing a continuous conveyor machinery. The vibrating conveyor uses the motor as the high quality vibration source, causes the material to be tossed at the same time forward movement, achieves the transportation goal; The structure form divides into the open type, the seal type; The transmission form may the trough transmission or the tube type transportation, the electrical machinery position Can be up, down or side mounted side. Classification of vibrating conveyor 1.Flexible connecting rod type. Elastic connecting rod vibration conveyor consists of eccentric shaft, connecting rod, connecting rod end spring and trough and so on. Eccentric shaft rotation to make the end of reciprocating rod movement, causing the tank for directional vibration. So that the material within the tank continue to move forward. Vibration conveyor generally uses low frequency, large amplitude or medium frequency and medium amplitude. 2.Electromagnetic type Electromagnetic vibrating conveyor by the core, coil, armature and chute and other components. Rectified current through the coil, the cyclical changes in the electromagnetic attraction, stirred tank vibrate. Generally use high frequency, small amplitude. 3.Inertial type Inertia type by the eccentric block, spindle, chute and other components, eccentric block rotation generated by the centrifugal inertia of the vibration caused by the trough. Medium frequency and amplitude are generally used. Uses: Widely used in metallurgy, coal, building materials, chemicals, food and other industries in the powder and granular material transport. Features: This model has the advantages of simple structure, convenient installation and maintenance, low energy consumption, no dust scattering and low noise. http://en.vibratingconveyor.sinocsm.com
SPU: PSV300 Trade name: Fault code quick clearing, I / M status detection, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector) technical parameter Master control chip: crystal element Operating voltage: 12V Operating current: 64 mA Operating temperature: -30~70â?? Product size: 123 * 65 * 22mm Packaging size: 245 * 160 * 33mm Product weight: 135g With packaging: 243g Quantity quantity: 50 pcs product description 1. Read the car fault code 2. Clear the fault code 3.I/M 4. Rack number 5. Support for 1 language: English 6. Communication mode, OBD interface 7.CE / FCC / ROHS / UKCA certification Support agreement 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) Automotive diagnostic tool WiFi Elm327 OBD car scanner fault repair decoder ECU card reader car diagnostic scanner OBD car scanner, diesel vehicle diagnostic tool Auto Repair OBD 2 scanner Vehicle fault analyzer diesel vehicle OBD scanning tool ECU reader OBD Key Programmer OBD Car scanner OBD, adapter OBD II Diagnostic system OBD reader Motorcycle diagnostic scanner
ZB1402-25 Name Eye End Cap Material Black nylon MOQ 1 PC Size 22/25mm Packing opp bag+ carton Brand Richwits Speficication of Eye End Cap Bimini top fittings cover cap eye end made of black nylon,It's durable and strong materals for tough saltwater environment. Nylon eye end is very lightweight,solid,strong,Great accessories for kayak,canoe,marine boat,fishing dinghy,raft and so on. Bimini fittings top cover cap eye end fits for 7/8'' /1" OD round tube,fits most standard bimini tops. Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon. Most of them can be supplied from stock. Low MOQ is acceptable. Contact us now for more details!
Model No.:ZB1402-22 7/8 inch Name Eye End Cap Material Black nylon MOQ 1 PC Size 22/25mm Packing opp bag+ carton Speficication of Eye End Cap Bimini top fittings cover cap eye end made of black nylon,It's durable and strong materals for tough saltwater environment. Nylon eye end is very lightweight,solid,strong,Great accessories for kayak,canoe,marine boat,fishing dinghy,raft and so on. Bimini fittings top cover cap eye end fits for 7/8 1 OD round tube,fits most standard bimini tops. is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon. Most of them can be supplied from stock. Low MOQ is acceptable.
Pressure sensors, which is installed at one end of the fuel track, is used to measure the fuel pressure in the common rail pipeline. It is part of the vehicle fuel system and is used to monitor the fuel pressure on the fuel track. The Fuel Pressure Sensor 0281006112 sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281006112 4.Function: Control emissions in combustion environments 5.Application: BOSCH CUMMINS DAF FIAT IVECO FORD KOMATSU VW 6.Ciondition: 100% NEW 7.Weight(g): 50.7g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The Fuel pressure sensors is installed at one end of the fuel rail to measure the fuel pressure in the common rail pipeline. It is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail. The sensor sends this signal to the ECU, which then uses it to make adjustments to the vehicles fuel and timing. Quality Commitment :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281006086 4.Function: Control emissions in combustion environments 5.Condition: 100% NEW 6.Weight(g): 50.7g 7.Delivery time: 7-15 days 8.Packing: Neutral packing Customize according to customer needs
The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. It is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail. The sensor sends this signal to the ECU, which then uses it to make adjustments to the vehicles fuel and timing. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281002921 4.Function: Control emissions in combustion environments 5.Ciondition: 100% NEW 6.Weight(g): 50.7g 7.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The Fuel Pressure Sensor is installed at one end of the fuel rail to measure the fuel pressure in the common rail pipeline. It is part of the vehicle's fuel system and is designed to monitor fuel pressure on fuel tracks. The High Pressure Common Rail 0281002907 sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281002907 4.Function: Control emissions in combustion environments 5.Condition: 100% NEW 6.Weight(g): 50.7g 7.Deliverytime: 7-15 days 8.Packing: Neutral packing Customize according to customer needs
Fuel Pressure sensors, which is installed at one end of the fuel track, is used to measure the fuel pressure in the common rail pipeline. It is part of the vehicle fuel system and is used to monitor the fuel pressure on the fuel track. The Fuel Pressure Sensor 0281002908 sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281002908 4.Function: Control emissions in combustion environments 5.Condition: 100% NEW 6.Weight(g): 50.7g 7.Delivery time: 7-15 days 8.Packing: Neutral packing Customize according to customer needs
The Fuel Pressure Sensor is installed at one end of the fuel rail to measure the fuel pressure in the common rail pipeline. Fuel Pressure sensor system and designed to monitor the fuel pressure that is present at the fuel rail. The fuel pressure 0281002903 sensor sends this signal to the ECU, which then uses it to make adjustments to the vehicles fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281002903 4.Function: Control emissions in combustion environments . 5.Condition: 100% NEW 6.Weight(g): 50.7g 7.Delivery time: 7-15 days 8.Packing: Neutral packing Customize according to customer needs
Which is installed at one end of the fuel track,the Fuel Pressure Sensor,is used to measure the fuel pressure in the common rail pipeline. It is part of the vehicle fuel system and is used to monitor the fuel pressure on the fuel track. The Fuel Pressure sensor 0281002842 sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281002842 4.Function: Control emissions in combustion environments 5.Application: BMW CHRYSLER DODGE JEEP BOSCH Mercedes-BENZ SMART 6.Ciondition: 100% NEW 7.Weight(g): 50.6g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The Fuel Pressure Sensor is installed at one end of the fuel rail to measure the fuel pressure in the common rail pipeline. The sensor sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 0281002260 4.Function: Control emissions in combustion environments 5.Application: BOSCH ALFA ROMEO CITROEN FIAT IVECO LANCIA PEUGEOT RENAULT 6.Ciondition: 100% NEW 7.Weight(g): 35.5g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
Pressure sensors, which is installed at one end of the fuel track, is used to measure the fuel pressure in the common rail pipeline. It is part of the vehicle fuel system . The Fuel Pressure Sensor 2831362 sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 2831362 4.Function: Control emissions in combustion environments 5.Application: CUMMINS 6.Ciondition: 100% NEW 7.Weight(g): 50.7g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The Fuel Pressure Sensor is part of the vehicle's fuel system. Which is installed at one end of the fuel track,the Fuel Pressure sensor,is used to measure the fuel pressure in the common rail pipeline.The Fuel pressure regulator 43PP7-2 sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 43PP7-2 4.Function: Control emissions in combustion environments 5.Application: NISSAN 6.Ciondition: 100% NEW 7.Weight(g): 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
VEHICLE SPECIFICATION DESCRIPTION Truck Model ZZ3257S3647W Truck Brand SINOTRUK HOWO Driving Position Rght /Left hand Driving Fuel tanker capacity 300 The Total Mass 35,000kg Cargo box 5600x2300x1500 mm Box thickness Boot 8mm side 6mm Dead Weight 12300kg Hydraulic Jack Front / Mid Lift Max speed 102 Color Optional Chassis & Add Components Frame Details High-Strength U-profile ladder frame with section of 300 90 8mm and reinforced sudfram, all cold riveted cross members. Dimension(Lx W xH) mm 8685x2496x3850 Overhang(front/rear) (mm) 1500/725 Wheel base (mm) 3625+1350 Engine Model WD615.47 Power 371hp/273kw.2000r/min Emission EURO II Displacement(L) 9.896 Type water-cooled four strokes 6 cylinders in line turbocharged, directly injection Kind of Fuel Diesel Fuel Consumption(L/100km) 25L/100km Clutch & Gear Box System Clutch SINOTRUK 430mm diaphragm spring clutch Gear Box HW19710 Axles Front Axle Model HF9 axle. Capacity: 9000kg Rear Axle HC16 axle. Capacity:2X 16000kg Ratio of rear axle 4.8 Electrical System Battery 2X12V/165Ah Alternator 28V-1500kw Starter 7.5Kw/24V Brake System Service brake Dual circuit compressed air brake Parking brake spring energy, compressed air operating on rear wheels Auxiliary brake Engine exhaust brake Steering system Model ZF8118 Type hydraulic steering with power assistance Wheels & Tyres Type 1200R20 Material Steel tires Quantity 10+1 spare Kin pin 50mm or 90mm Cabin Type HW76 Standard cabin single sleeper with air conditioner, all-steel forward control,55 hydraulically tiltable to the front,2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver s seat and rigid adjustable co-driver s seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers
Raw material is mainly from some famous refinery steel mills, such as BAO STEEL, Tianjin, and Chengdu etc, which are the best and largest raw material manufacturers in China. we have been through ISO9001:2000 international quality system certification. Warranty period for our honed tubes and chrome bars is 2 years. For some special or important customers, the period is 5 years. 2. We own 35 sets honing machines producing tube ID from 38.1mm to 1000mm, at max length of 18m. 3. We own 18 sets of equipment for piston rod in completely production, producing OD from 12mm to 500mm, at max length of 16m. Plate according to customers different requirements such as Chrome, Nickel, and Ceramic. Thickness is from 10m to 100m. 4. High Precision: Honed tube (Roughness of tube is 0.2m and straightness is less than 0.15/1000), piston rod (Plating thickness is 10-100 micron. Surface roughness is 0.2m and straightness is also less than 0.15/1000) 5. Product details are completely according to International Standard, chrome rod and honed tube must be cut flatly, and no chrome marks on the surface of rod. (Most of domestic mills dont do this in order to reduce cost) 6. Delivery time is very fast. The average delivery time is 5-30 days after confirming the orders. Production output for honed tubes is about 300tons per month and 200tons for chrome bars per month. 7. Package: our packages are safer than others supplier in China. Packing for rod normally we choose is cardboard that film attached inside, which does not only prevent rods from scratch but also from oil rusting. Tubes are made with caps at both end and painted oil on inside and outside surface. For full container, extra package like parcel at outside will be used. 8. Each product will do full test (include chemical, mechanical, tolerance, roughness, chrome plate thickness, hardness, salt spray, etc). All the test report will be kept 5 years. We will make the Mill test certificate to customer if they need.
EANï¼?6975913480994 Commodity code: PS000211. Trade name: PS000211.FOR Honda Acura RDX (2019-2021) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product Size: 33 * 15 * 5cm Commodity weight: 0.45kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5.USB fast charging output interface, which supports QC3.0 fast charging protocol. 6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal. Step Price (FOB): 1. Sample unit price is USD110.40 2.200set, USD66.24 3.400set, USD59.62 4.600set, USD53.66 5.800set, USD48.29 Remarks: Free shipping charge for samples. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼? Commodity code: PS000149. Trade name: PS000149. FOR Honda Accord 10 generation / Intel School (2018-2022) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 10W / 5W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Size of goods: 26.5 * 17 * 4cm Commodity weight: 0.25kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5.USB fast charging output interface, which supports QC3.0 fast charging protocol. 6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
