Rock wool products are made from natural mineral wool such as basalt and dolomite. The natural rock are melted into melts in cupola at a very high temperature about 1500â??.The highest application temperature is 700â??. it has characters : sound insualtion ,fireproof ,waterproof and so on. It always used in the construction sound insulation wall,roof , industrial furnace,oven,heat -treating equipment,storage tank and so on.It has characters such as: Superior Fire Resistance Rock wool board is non-combustible, not burn,not smoke and can arrived Class A fire rating and it also has heat preservation. Its highest working temperature is 750â??. Good Water reprellence: Rock wool products greatly reduced by adding special silicone emulsion water repellent agent, thus ensuring the quality requirement for external wall insulation system. Hydrophobic rate is 99%. Environment Friendly Free from asbestos, CFCS, HFC, HCFCS and other harmful substances to the environment; our rock wool adopt the resin binder. Do not release any toxic gas at high temperature. Construction Application Rock wool was used for building materials , and steel structure insulation soundproof and fireproof used for wall and roof of house Heat preservation for steel structure building For indoor partition wall , Train compartment . Rock wool used for industrial furnace, oven, heat-treating equipment, storage tank, storage groove. power house, flue, petrifaction and oil refining equipment and all kinds of keeping-warm and heat insulation pipelines.
Rock wool products are made from natural mineral wool such as basalt and dolomite. The natural rock are melted into melts in cupola at a very high temperature about 1500The highest application temperature is 700 it has characters : sound insualtion ,fireproof ,waterproof and so on. It always used in the construction sound insulation wall,roof , industrial furnace,oven,heat -treating equipment,storage tank and so on.It has characters such as: Superior Fire Resistance Rock wool board is non-combustible, not burn,not smoke and can arrived Class A fire rating and it also has heat preservation. Its highest working temperature is 750 Good Water reprellence: Rock wool products greatly reduced by adding special silicone emulsion water repellent agent, thus ensuring the quality requirement for external wall insulation system. Hydrophobic rate is 99%. Environment Friendly Free from asbestos, CFCS, HFC, HCFCS and other harmful substances to the environment; our rock wool adopt the resin binder. Do not release any toxic gas at high temperature. Construction Application Rock wool was used for building materials , and steel structure insulation soundproof and fireproof used for wall and roof of house Heat preservation for steel structure building For indoor partition wall , Train compartment . Rock wool used for industrial furnace, oven, heat-treating equipment, storage tank, storage groove. power house, flue, petrifaction and oil refining equipment and all kinds of keeping-warm and heat insulation pipelines.
Nickel metals, products is a distribution center Located in houston, texas. It was Primarily founded for the sole purpose of providing alloys to the oil and Gas, metals, chemical, and pharmaceutical industries at a very competitive Price. The company accomplishes this goal by purchasing directly from the Mill and passing down the savings to the customer. .We do business all over the world with registered documents of Operation, we belong in the usa stock market, we are the fastest and Reliable, purity: 99.9% min grade: grade nickel metals int crystal, copper mine Product type: Crystal image, natural copper mine stone Regional feature: Huston texas Place of origin:africa(senegal, south africa, cameroon) Brand name: Nickel metals :copper mine Item Description 1.Material 100% natural rock crystal 2.Color Mixed color 3.Size 12cm/10cm 4.Weight 210g depending on customers order 5.Moq 1 Metric tone 6.Deliver time 1)sample order:3days after receipt of payment 2)bulk order:7-15days after receipt of payment 7.Payment 1)l/c;t/t;paypal;west union; moneygram etc 2)sample order:100% payment before shipment 3)bulk order:50% deposit balance before shipment 8.Packaging 1) bubble paper inside and hard corrugated box or wooden case outside 2) according to customers' requirement
Application This oil purification plant is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This product, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oilâ??s nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oilâ??s nature. Features 1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification â?¤15min (GB/F 7305). 2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water. 3 With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the Ã?3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638). 4 With the trapezoidal, spiral, automatic back flushing system. 5 With the advanced dielectric condensation devices. 6 On-line oil purification can be carried out with turbine or water turbine automatically without any person. Advantages This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Having a large foreign trade network, ATABOR CO. INC has earned a respected position with years of experience. As a one-stop shop, our firm takes on the task to promote domestic products to related markets in the world. ATABOR CO. INC. that has successfully completed technically-different projects in Europe, Asia, North and East Africa, and America, carries on its path with its young and dynamic staff and influential solution partners. Our firm, which has gained itself a place in primarily the rising markets of energy, construction, manufacture, industry and counselling services, provides products to the four corners of the world within logistic possibilities. In the field of energy, our firm has a key role in configuring solar and wind energy plants, renewable energy systems and transformer centers in Europe, Middle East, Africa and CIS countries. Besides, ATABOR establishes conventional energy plants where natural gas, naphtha, diesel and petroleum are used. Within this framework, our mission is to leave future generation a more habitable world by protecting the environment. ATABOR CO. INC. that values human beings saves lives by providing vital products such as ambulances and fire-extinguishing systems to countries in need. Our firm that aims at providing all merchandise and services needed possesses a wide range of products. In line with this goal, ATABOR CO. INC. is in cooperation with unlimited number of firms. As ATABOR family that increases the reorganizability of Turkey in the global market, we are proud to be the window from where the world sees our country. The list of products affiliated with ATABOR can be found below. Product list: ï?¼ Granite and natural stone marble ï?¼ Boilers ï?¼ Industrial kitchen equipment ï?¼ Fire equipment and fire fighting vehicles ï?¼ Ambulances ï?¼ Transformers ï?¼ Industrial workwear ï?¼ Generators ï?¼ Tea (import and export) and related factory tea machinery
Hydraulic Gate Valve Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. Product Description Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. API 6A Hydraulic Gate Valves are used primarily in the oil and gas industry for controlling the flow of fluids, such as crude oil and natural gas, in high-pressure and high-temperature environments. They are actuated using hydraulic systems, making them suitable for remote or automated operations. Features 1. The integral forging of the valve body, along with the use of carbide alloy on the sealing surface and seats, enhances wear resistance, and corrosion resistance, and extends the service life of the valve. 2. The metal-to-metal sealing between the gate and seat, seat and body, bonnet seal, and stem backseat provides a secure, long-lasting seal. 3. The balancing lower stem of the valve allows it to stay in position even in the absence of hydraulic power, and the double-acting actuator requires hydraulic power to both open and close. Should a failure of hydraulic power occur, this valve will remain in position. 4. Balancing stem that allows the gate to stay in position unless hydraulic power is supplied to the actuator to positively open or close valve 5. Two spring-loaded, pressure-energized, nonelastomeric lip seals provide low-pressure sealing and protect against particle intrusion, while the stem seal design is capable of handling a wide range of pressures, temperatures, and fluids. 6. Stem seal design that covers a wide range of pressures, temperatures, and fluids encountered in wellhead and manifolds service metal-to-metal bonnet seal. 7. A manual locking screw maintains the gate in the closed position without any operating pressure, and socket head cap screws are used to tie down the actuator head flanges, reducing exposure to corrosive environments.
Titanium electrode plate for water treatment is a platinum group noble metal oxide with high electrocatalytic performance, strong oxidation resistance and good electrical conductivity coated on a pure titanium substrate, which is an insoluble anode. Product parameters Product name: Titanium electrode plate for water treatment Brand: TOPTITECH Product base material: Gr1 pure titanium Product coating: Ru/Ir/Pt (ruthenium iridium platinum) Product process: nano coating - high temperature sintering Specifications: customized according to customer requirements Product performance: 1. It has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; The plates is sintered at high temperature, so the surface particles are not easy to fall off; in the air the temperature in use can reach 300�°C; 2. It is suitable for filtering various corrosive media, such as: weak hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium; 3. It has excellent mechanical properties, can be machined for cutting, welding, etc., has high compressive strength, and the internal pressure breaking strength is as high as 0.3MPa; 4. The regeneration method is simple and can be reused after regeneration. Applications 1.Production of sodium hypochlorite via electrolysis in the chlorate and chlor-alkali industries In the production of chlor-alkali, pure saturated salt water is used as electrolytic solution, titanium electrode is used as anode, and asbestos wool attached to iron mesh is used as cathode. The anode chamber produces chlorine gas, and the cathode chamber produces hydrogen gas and sodium hydroxide. After purification, it is widely used in various industries. in industrial production. 2. Electrolyzed functional water Water that has been artificially treated to achieve a variety of beneficial purposes is referred to as functional water. With its high practicability, good sterilization effect, and lack of secondary pollution, electrolyzed water is a well-liked sterilization treatment technique. Titanium electrodes, which are frequently used in electrolyzed water machines, are used to electrolyze drinking water or trace salt water in order to generate functional water. 3. Cathodic protection In the ocean, ship hull, bridge and other steel use environments, due to the corrosion of impurities in the steel and micro-batteries, coupled with the complex natural environment, although corrosion-resistant alloy steel is selected and the thickness of the material is increased to coat excellent corrosion-resistant paint, these The corrosion of structures is still very serious, which poses a great threat to safe production, and cathodic protection is a convenient and important measure to effectively protect permanent steel structures in the ocean.
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
High Efficiency Sunflower Seeds Roasting Machine, Nuts Roaster Equipment Microwave industrial tunnel baking and puffing equipment, roasting equipment, microwave baking equipment,continuous microwave roasting machine,industrial microwave roasting baking machine , drying and sterilization machinery, widely used in the peanuts ,sunflower seeds,sesame seeds, wheat, melon seeds, peanuts, corn, soybeans, walnuts, areca-nuts,almonds, chestnuts, pistachios, cashews etc roasting.Compared with the traditional production methods, microwave baking foods are crispy and delicious, puffed full of particles, natural color, beautiful appearance, and has insecticidal sterilization. 1 While microwave equipment baking, along with the bactericidal effect. Microwave sterilization reflect in the dual role of thermal effects and non-thermal effects , compared to the conventional temperature sterilization ,can obtain a satisfactory sterilization in lower temperatures and a very short time.The sterilization temperature is around 80ºC in general,the processing time is 3~5 minutes,and can maintain its nutrients. 2 Easy to operate. Microwave power and the conveyor speed can be sleepless adjustment, there is no thermal inertia, can open and stop at an time, easy to control,improve the production environment.Microwave equipment, no waste heat radiation, no dust, no noise, no pollution, easy to implement the testing standards of food hygiene.  3 The roasting effect is obvious. The purpose of rapid microwave heating effect, make the material internal water molecules vaporize rapidly,then reach the purpose of puffing. 4 Low-temperature sterilization, less loss of nutrients.Retain vitamin C,conventional heating treatment for fruits and vegetables is 46% ~ 50%, but the microwave can reach 60%~90%.Retain vitamin A,conventional heating treatment is 58%,but the microwave can reach 84%,and does not affect the original flavor, is a good method for deep processing of fruits&vegetables and get green foods. Power supply 380V 50HZ three-phase five-wire Microwave Output Frequency 2450±50MHz Microwave input apparent power 28KVA Microwave output power 20KW Microwave power adjustment range 0-20KW(adjustable) Ambient temperature -5-40C Relative humidity 80%,Surrounding environment:no corrosive gas, conductive dust and explosive gas Overall dimension(L*W*H)  9400*850*2050 mm Transmission speed 0-10m/min(adjustable) Height of the inlet and outlet 60 mm Microwave leak accord with a country GB10436-89 standards(
The Quick Details of Pe100 Water Pipe : Place of Origin: Luoyang ,China Material: HDPE Brand name: GUORUNXINCAI Material: HDPE Diameter Nominal: 20-800mm Wall Thickness: 2.3-57.2mm Pressure: 0.6-1.6Mpa Standard: GB/T 13663-2000 Pe100 Water Pipes' diameter,length and other types of indexes can be based on clients' requirement. IRRIGATION PIPE of High Density Polyethylene High-density polyethylene pipe(HDPE pipe) is made from high density polyethylene as the main raw material, adding a small amount of antioxidants, Anti-UV absorbers and pigments. Pe100 Water Pipes' main characteristics: 1. Long-life-span Pe100 Water Pipes can be used for more than 50 years under normal condition 2. Good sanitary performance Pe100 Water Pipes' material is non-toxic, does not scale. It is not easy to form dirt, and avoids secondary pollution of drinking water 3. Good corrosion resistance Pe100 Water Pipes can resist variety of chemical mediator except few oxidants 4. Pe100 Water Pipes are with Good crack growth resistance 5.Pe100 Water Pipes are with Little coefficient of friction and low flow resistance 6.Pe100 Water Pipes are with Excellent wear resistance Its wear resistance is 4 times higher than steel pipe under normal conditions 7. Good solderability Pe100 Water Pipes' interface strength is higher than the pipe body 8. Pe100 Water Pipes are with Fine flexibility and anti-scratch ability 9. Low cost Pe100 Water Pipes can reduce the cost of project substantially The Applications of Pe100 Water Pipes: Guorun Pe100 Water Pipes can be widely applied to below fields: 1. City and town water supply 2. To transport natural gas & coal gas 3. Food & chemical industry 4. To transport ore & mud 5. To replace cement pipe, cast iron pipe & steel pipe 6. Landscaping pipeline Pe100 Water Pipes outer diameter is from 20 mm to 800 mm, and its wall thickness is 2.3 mm to 57.2 mm mainly.
The melting point range of SASOLWAX S682 is between 62 and 66, with a needle penetration of 44 (1/10mm) and a kinematic viscosity of 10 (mm²/ s) . This model is very similar to China's microcrystalline wax 70#, with a drop melting point of 70.2, a penetration rate of 21.4 (1/10mm), and a kinematic viscosity of approximately 7 (mm²/s). Because microcrystalline wax in China belongs to hard wax, the penetration may be slightly lower. If you are looking for a similar product to this SASOLWAX S682 micro wax, you can contact us. For example, you can use 70 # microwax in jar candles to improve candle performance. Microcrystalline wax is a waxy substance that is solid at room temperature and has a high melting point. It is made up of long-chain hydrocarbons and is derived from crude oil or natural gas. Microwax is often used in various industrial and cosmetic applications, such as in the production of candles, cosmetics, and polishes. Microwax is different from other types of wax because of its unique properties, such as its high melting point, low viscosity, and good hardness. These properties make it useful in applications where a wax with a high melting point and good hardness is required. In addition to its industrial and cosmetic uses, microcrystalline wax is also used in the food industry as a coating for fruits and vegetables to extend their shelf life. It is also used in the pharmaceutical industry as a binder and coating agent for tablets and capsules. What are the common types of microcrystalline wax produced by Germany's Sasol? Sasolwax 682, Sasolwax 3971, Sasolwax 2528, Sasolwax 1365. Which is better, Sasol or Chinese microcrystalline wax? The main focus is on the application scenarios of the product, there is no best, only the most appropriate. Because the properties of microcrystalline waxes are similar.
Titanium pipes for exhaust and downpipe applications are highly sought after due to their excellent properties, including high strength, lightweight design, corrosion resistance, and heat endurance. Specifications: Material: Gr1 Purity: >99.6% Outer Diameter (OD): 8mm Wall Thickness: 1.2mm Leg Length: 400mm (Customizable) Bend Angle: 90�° Surface Finish: Polished Features Superior Strength and Durability: Titanium pipes exhibit a remarkable strength-to-weight ratio, making them incredibly strong and durable. This property allows them to withstand high-pressure conditions, extreme temperatures, and mechanical stresses associated with exhaust systems, ensuring long-lasting performance. Lightweight Design: Titanium is renowned for its exceptional lightweight nature, which contributes to reduced overall weight in vehicles and aircraft. The lighter weight of titanium pipes for exhaust and downpipe applications not only improves fuel efficiency but also enhances the handling and performance of vehicles. Corrosion Resistance: Titanium is highly resistant to corrosion, making it an ideal choice for exhaust and downpipe systems exposed to harsh environments, such as corrosive gases, high temperatures, and moisture. This corrosion resistance ensures the longevity and reliability of the pipes, even in challenging conditions. Improved Engine Performance: Titanium pipes offer excellent exhaust gas flow characteristics, reducing backpressure and improving engine performance. The enhanced flow efficiency contributes to increased horsepower, torque, and overall engine responsiveness, providing a thrilling driving experience. Aesthetic Appeal: In addition to their exceptional performance, titanium pipes often feature a polished or brushed surface finish, adding an aesthetic appeal to the exhaust and downpipe systems. The sleek and sophisticated appearance of titanium pipes enhances the overall visual appeal of vehicles and aircraft. Applications: Automotive Industry Downpipes Motorsports Performance Upgrades Aerospace Industry Jet Engines Energy Sector Power Generation Marine Industry Marine Exhaust Systems
Carbon seamless steel pipe is made by perforating ingot or solid tube billet and then hot rolling, cold rolling or cold drawing. Carbon seamless steel pipe occupies an important position in Chinese steel pipe industry. Carbon seamless steel pipes transport water, oil, gas or other chemical fluids. The performance of� seamless steel pipe� is very good, and it has a wide range of applications, and has good corrosion resistance, practicability is indeed guaranteed, and the service life is also very long. Moreover, many construction parties need to purchase steel pipes in large quantities. Material: GR.B,ST52, ST35, ST42, ST45,X42, X46, X52, X56, X60, X65, X70,SS304. Standard: API5L , ASTM A106 Gr.B, ASTM A53 Gr.B,ANSI A210-1996, ANSI B36.10M-2004 , ASTM A1020-2002,ASTM A179-1990 ,BS 3059-2,DIN 17175 ,DIN 1630 ,DIN 2448. Certificates: ISO 9001:2008, SGS,. Dimensional specification: ANSI/ASME B36.19M, ANSI/ASME B36.10M. Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless. . Length Range: 20 FT (6 meter), 40FT (12 meter)or customized. End Protection: plastic Caps or iron Caps. Surface Coatings: Natural, Black painting, 3PP, 3PE and FBE, Cladding and Lined etc. Shapes: Round, Rectangle. Schedule Thickness Range: SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS. Packaging: Loose package; Packaged in bundles(2Ton Max); bundled pipes with two slings at the both end for easy loading and discharging.
Steel pipes are long and hollow tubes that are used for� many different applications in a variety of places. Such as conveying fluids and powdery solids, exchanging heat, making machine parts and containers and so on. It is also an economical type of steel and� its versatility makes pipes the most often used product that is produced by the steel industry. Steel pipe production technology development began with the rise of the bicycle manufacturing, development of oil in the early years of the 19th century, two world war ships, boilers, aircraft manufacturing, after the second world war thermal power boiler manufacturing, chemical industry and the development of oil and gas drilling and transportation, effectively driving the steel pipe industry in the development of varieties, yield and quality. Steel pipe can be divided into two categories according to the production method: seamless steel pipe and seam steel pipe, seam steel pipe is divided into straight seam steel pipe and spiral seam welded pipe. Product name: steel pipe, structure steel pipe; Standard: ASTM, ASME and API; Grades: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2. ASTM A106 Gr. B/C. ASTM A53 Gr. B; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Welded pipes is steel plate or steel belt, and the surface is a pipe with welding ribs after cutting, bending, welding and other processes. The main advantages of welded pipes are their lower inherent cost, narrower tolerances for wall thickness, concentricity (OD/ID) and internal surfaces that can be checked prior to manufacture. Welded steel pipe is divided into furnace welding pipe, electric welding (resistance welding) pipe and automatic arc welding pipe because of its different welding forms into straight seam welding pipe and spiral welding pipe two kinds, because of its end shape is divided into round welding pipe and special-shaped (square, flat, etc.) welding pipe. Seamed pipes offer tighter tolerances but thinner wall thickness rather than seamless pipes. Welding pipe can be used for water pipeline, gas pipeline, heating pipeline, electrical pipe and so on. Product name: steel line, welded steel pipe, API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Product Features: Durable & Leak Proof: With the leak proof stainless steel lid, the bottle is stable even if it is upside down, no leaking. Safe to put it in the bag, backpack or gym bag. Wide mouth design, easy for you to grip, ice-fill and clean. High Quality Borosilicate Glass + Crystals: To keep you safe and sipping strong, our water bottle is made with the highest grade materials like shatter-resistant borosilicate glass and all stainless steel caps. Plus,natural crystal is rich in minerals. Design: A unique cystal water bottle that can revitalizes your water by acting as a water structure device, changeable crystal make it easy to clean, the large crystals speak to the premium quality of the crystal infusion. Gift Ready With Beautiful Packaging: Each bottle comes gift ready in stunning packaging. Each glass, Bamboo lids and neoprene sleeve are tested to the highest standards. They are all BPA approved making it the ultimate gift for yourself and your loved ones. Treat the wellness enthusiast in your life to all the positive healing effects of crystal infusion. Capacity: 550ml (19 oz) or customized. Customizing Options: Surface Finish: brushed stainless steel, spray painting, powder coating, UV coating, water transfer print, gas transfer print, etc. Crystal Type About 24 different crystal stones for you to choose. Logo: we can customize your own brand logo. silkscreen print, laser engraved, embossed logo, heat transfer print, 4D print, sublimation transfer, etc. Packaging box: egg crate, white box, custom color box, cylinder box, display box, etc.
TDS - 7885 ( OCP 21661110100) - channel, active, resulting in a diffuse flame thermal oxidative decomposition of natural gas with high dispersion and low refractive structuring. FIZIKO AND CHEMICAL Carbon Black K-354 Name Unit. rev. Figures for GOST - 7885 1. The specific geometric surface m/g 90-100 2. The specific adsorption surface m/g no more 140 3. The pH of the aqueous suspension- 3,7-4,5 4. Mass share of losses at 105°C,%, no more % 1.5 5. Ash,%, no more % 0.05 6. Mass share of residue,%, no more, after sifting through a sieve mesh: %0045 K % 0.0805 K % no more 0,0010014 K % no more 0,004 TRANSPORT INFORMATION APPLICATION Carbon black 354-K is applied as reinforcing filler in rubber compounds as a pigment, and to varnishes, enamels and printing inks. The ability of carbon black significantly increase the mechanical properties of rubber is responsible for its use in the manufacture of pneumatic and solid tires, various rubber-technical products, shoes, shells of electric cables, household and medical supplies. Carbon black is widely used in the electrical industry, in some alloys and special papers, and various varnishes and inks, including printing, plastics and other products. In the manufacture of printing inks, enamels, varnishes mainly used carbon black K-354 as having the deepest black. Also used in the manufacture of chemicals, medicine, dye, movies, photos and other industries. Carbon black K-354 is available in granular form, is supplied to the valve, plastic and paper bags. Packing: 4-ply stem fields covered paper or plastic, pipropylene 22-24 kg bags.
Chicken manure dryer is suitable to be used in large, medium and small-sized chicken house and the areas where the breeding industry is developed. This kind of rotary dryer is designed for high moisture material, such as more than 65% moisture. The same as Chicken manure, cow manure or pig manure. This dryer is different from other normal dryer, there is a inner mixing shaft to mix plup to better drying. And this type dryer is not very long, it is shorter than normal dryer. This can save your area, and the Drying efficiency is very high. The plup will be in dryer 30-50 mins more or less. You can adjust the speed. As normal, the drying working time is 24hours , our smallest model the output capacity is 0.5 t/h, the largest one is 20 t/h. And the outlet moisture is less than 15%. The manure dryer include shell, lifting blade, mixing shaft, frequency conversion motor, reducer, gear ring, roller ring and overall support. So it is the whole plant to drying manure. It is suitable for high moisture material. You can use coal, natural gas, oil, biomass pellet to be fuel for this manure dryer. You should build a burning room to adjust hot air temperature. Normal temperature is 450-550C. A. Dewaterer. The raw manure moisture is more than 70%, before drying, you need this dewaterer to reduce the water content to be . This can save the fuel consumption, and Improve the efficiency of drying. B. Transfer system: belt conveyor or screw conveyor. We suggest use screw conveyor for this manure, it can mix manure before feeding. C. Dust catcher system: As normal you can use cyclone catcher, and we also suggest to use wet-filter to Reduce odor. D. Burning system,hot air room. The fire can not be in dryer directly, so you should build a hot air room with refractory bricks, then use fan blower to waft hot air to dryer. Related product:Chicken Manure Dryer
1.Product information of sus304 stainless steel tube/pipe Production: Steel pipe / steel tube Standard: API 5L, ASME, ASTM B36, JIS, DIN, GB8162, GB8163, GB5310, etc. Out Diameter: DN10~DN1200, 1/8"~100", 6mm~2400mm Wall Thickness: SCH5~SCH160, STD, XS, XXS, 1mm~120mm Material: ASTM A106 GRB/ A53 GRB/ API 5L X42, X52, X60, X65, X70GRB/ API 5 CT/ Q345/ ST42/ST37/ ST52. Q195/Q215/Q235/A179etc. Length: 12m, 11.8m, 6m, 5.8m, or as customers required Surface treatment: Black painting, black varnish, transparent oil, hot galvanized, 3PE, epoxy coating, BE, PE. Etc. Technique: Seamless & welded Usage 1. Low and middle pressure fluid transportation pipeline 2. Casing Tube 3. Boiler Pipe 4. Petroleunm and natural gas industry 5. Chemistry industry 6. Electric industry Package 1. Bundle packing. 2. Bevelled end or plain end or warnished as per buyer's required. 3. Marking: As per customer's requests. 4. Painting varnish coating on the pipe. 5. Plastic caps at ends. Supply range: 1. Seamless steel pipe 2. ERW steel pipe 3. Steel casing 4. Tubing 5. Hot-rolled steel pipe 6. Spiral steel pipe 7. Hot-sus304 stainless steel tube/pipe
Application: It is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This series, which can rapidly and effectively remove the water, gas and impurities aiming at turbine oilâ??s nature of high water content, easily emulsified and high impurity content, make the oil reach new oil standard. Features: 1.Breaking emulsification thoroughly by means of polymeric material. 2.Dewatering high-effectively with once and for two steps dehydrator method, TY series can thoroughly remove the liquid water, free water and 80% of dissolved water. 3.With zhongnengâ??s distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by polymeric material, this machine can make the Ã?3 surpass or equal to 200 and make the cleanness not surpass grade 6 (NAS1638). 4.With the trapezoidal, spiral, automatic back flushing system. 5.With the advanced dielectric condensation devices. 6.On-line oil purification can be carried out with turbine or water turbine automatically without any person. Advantages: This machine breaks emulsification thoroughly, and the oil is very difficult to be emulsified again after treatment. Its dehydration volume is large and it can drain off the water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
