Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Place of Origin Hubei, China Type rail profile grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Product name rail profile grinding machine Profile wheel span: 1000mm Engine 2 stroke petrol engine M165 Grinding stone speed: â?¥3900r/min Grinding stone feeding stroke: 42mm Fuel tank volume: 4.5L Feed adjustment accuracy: 0.125mm Power: 6.0kW Grinding stone inclination: 0~90�° Grinding stone specification: 150*55*70mm NGM-6.0 Internal Combustion Rail Profile Grinding Machine This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
This Internal Combustion Rail Drilling Machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below �?13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Weight 23kg Dimensions (L x W x H) (mm) 668�?340�?425ï¼?mmï¼? Place of Origin China Engine Petrol engine :Honda GX50 1.47kW single cylinder,4stroke, forced air colling Displacement 47.9ml Speed 7000rmp Fuel tank capacity 0.63L Max drilling diameter 36mm Drill time â?¤30s Spindle speed at full load 292r/min Drill rod size weldon 19
Specifications Rated Output 419 kW 57 mhp Rated Speed 3000 rpm Displacement 219 L 134 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 88 mm x 90 mm 346 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Natural Alternator 12V 125A Dry weight without gear 220 kg 485 lbs Dimensions 870 mm x 589 mm x 627 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM35P marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A C35 panel Extension harness 3m 5m 10m Second station TFX Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Specifications Rated Output 588 kW 80 mhp Rated Speed 3200 rpm Displacement 2 L 122 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm 331 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Turbocharged Intercooled Alternator 12V 125A Dry weight without gear 229 kg 505 lbs Dimensions 909 mm x 613 mm x 675 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM4A2 marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A Seawater pump rear mounted B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A Seawater pump front mounted C35 panel Extension harness 3m 5m 10m Second station Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Opposite dipstick Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Specifications Rated Output 80.9 kW / 110 mhp Rated Speed 3200 rpm Displacement 1.995 L / 121.7 cu. in No. of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm / 3.31 in x 3.54 in Combustion system Direct Injection, Bosch Distributor Type VE Pump Aspiration Turbocharged & Intercooled Alternator 12V - 125A Dry weight without gear 217 kg / 478 lbs Dimensions 933 mm x 661 mm x 659 mm Controls Mechanical Certifications RCD 1 EPA Tier 2 BSO II EMC SOLAS NOTE: 1 kW = 1.3596 mhp = 1.34102 bhp Fuel condition: density at 15 C = 0.842 g/cm Technical data is according to (ISO 8665) / (ISO 3046) Fuel temperature 40 C at the inlet of the fuel injection pump (ISO 8665) Length includes KM4A2 marine gear (Dimensions may vary with other gears/elbow) Standard Engine Package Exhaust mixing elbow [L-type] Alternator 12V 125A B20 panel Flexible mounts Expansion tank for fresh water cooling system Electric stop solenoid Optional Accessories High-riser mixing elbow [instead of L-elbow] Secondary alternator 12V â 130A or 24V 75A including smart regulator C30 panel Extension wire harness [4m, 6m, 10m] Dual harness [for 2nd station] TFX Sidemount control head SOLAS including Certificate [factory fit only] Hot water kit with cocks Extension saildrive leg [75 mm] Propeller cone nut kit SD60 Air heater [glow] Trolling valve [only for KMH4A] On-board spare parts kit
Product Description Product Info for Kowa TSN-883 88mm PROMINAR PFC Spotting Scope (Angled Viewing, Requires Eyepiece) The Kowa straight-viewing TSN-884 88mm PROMINAR PFC Spotting Scope is a world-class caliber optic that redefines standards of color brilliance, sharpness, and brightness consistency. Kowa reinvented themselves again with the TSN-884, fastidiously examining each technological and ergonomic detail to produce the very best all-weather straight-viewing prismatic spotting scope. Kowa TSN-884 88mm PROMINAR PFC Spotting Scope (Straight Viewing, Requires Eyepiece) Specs Design Viewing Angle Straight Performance Objective Lens Diameter 88 mm Minimum Focus Distance 16.4' / 5.0 m Features Fogproof Yes Water Resistance Waterproof General Filter Thread 95 mm Tripod Mounting Thread 1/4"-20 Female, 3/8"-16 Female Dimensions L: 13.5" / L: 34.3 cm Weight 3.4 lb / 1.5 kg Packaging Info Package Weight 5.85 lb Box Dimensions (LxWxH) 16.7 x 6.75 x 6.7" Kowa C882 Fitted Scope Case Specs General Material Nylon Type of Closure Touch fastener Exterior Dimensions Not Specified by Manufacturer Interior Dimensions 15.1 x 7.87 x 2.56 (38.35 x 20 x 6.5 cm) (LxWxD) Accommodates Kowa TSN-882 and TSN-884 straight spotting scope Carrying/Transport Options Hand strap Weight Not Specified by Manufacturer Packaging Info Package Weight 0.565 lb Box Dimensions (LxWxH) 18.65 x 6.85 x 5.75" Kowa TE-11WZ II Wide-Angle Zoom Eyepiece Specs General Magnification With TSN-99 Scopes: 30 to 70x With TSN-880/770 Scopes: 25 to 60x With TP556 Scopes: 28 to 66x Angle of View With TSN-99 Scopes: 2 to 2.3�° (Actual) With TSN-880 Scopes: 3.5 to 1.5�° (Actual) With TSN-770 Scopes: 3.1 to 1.3�° (Actual) With TP556 Scopes: 3.2 to 1.3�° (Actual) Field of View With TSN-99 Scopes: 105.4 to 60.2' @ 1000 yd / 35 to 20 m @ 1000 m With TSN-880/770 Scopes: 126 to 69' @ 1000 yd / 42 to 23 m @ 1000 m With TP556 Scopes: 114 to 63' @ 1000 yd / 38 to 21 m @ 1000 m Exit Pupil Diameter With TSN-99 Scopes: 3.3 to 1.4 mm With TSN-880 Scopes: 3.5 to 1.5 mm With TSN-770 Scopes: 3.1 to 1.3 mm With TP556 Scopes: 3.2 to 1.3 mm Eye Relief 17.0 mm Dimensions �¸: 2.2 x L: 3.4 to 4.4" / �¸: 5.5 x L: 8.7 to 11.1 cm Weight 13 oz / 370 g Packaging Info Package Weight 1.08 lb Box Dimensions (LxWxH) 6.1 x 3.9 x 3.3" Klean Kanteen TKWide 16 Oz Insulated Bottle With Cafe Cap (Juicy Pear) Specs General Material 18/8 Food Grade Stainless Steel Dishwasher Safe Yes Capacity 16 fl oz / 473 ml Dimensions 8.7 x 3.0" / 22 x 7.6 cm Opening Diameter: 2.6" / 6.6 cm Weight 13.9 oz / 395 g with Cap Packaging Info Package Weight 0.875 lb Box Dimensions (LxWxH) 8.6 x 2.95 x 2.95"
# Product material:carbon steel,stainless steel,aluminum,Glass Fiber Reinforced Plastic #Product surface:Polished,Aluminum Oxidation Spray coated Hot dipped galvanized Galvanize Plain Steel,zinc aluminum magnesium # Product size:1-5/8"x 1" , 1-5/8"x 13/16", 1-5/8"x 1-5/8", 1-5/8"x 2-7/16", 1-5/8"x 3-1/4"(41 x 25 mm, 41 x 21 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm) # Product thickness: 18 GA 17 GA 16 GA 15 GA 14 GA 13 GA 12 GA (1.0 mm,1.2 mm,1.5 mm 1.8 mm 2.0 mm ,2.5 mm) , Others also welcome # Product Length:6' 10' 20' ,1.8 m 2.4 m 2.9 m,3.0 m,5.8 m,6.0 m ,Cut to Length upon request. # Application:Cable management support,Pipe and conduit supports,HVAC Duct Support,Pillar racking system,ceiling grid support bracket,Machine support protection,Solar panel bracket. We can offer # Full line of solid strut channel, slotted strut channel,welded strut channel, hole and patterns are available # Full line of fittings, clamps and strut supports # Wide variety of strut materials and finishes Hot questions Q1: Are you manufacture? A: No,we have partner in Wuxi Langfang city. Q2: How can I request product samples? A: The samples are free but courier charge will be collected. Please send us samples list and courier account number. Q3: How can I request a product catalog? A: The hard copies of catalogs are free but courier charge will be collected.The PDF catalog we can send to you by email or chap App. Q4: What is your payment terms? A: 30% T/T deposit,balance against B/L copy; Irrevocable L/C 100% at sight and irrevocable. Q5: How about the delivery time? A: Accord to your order list and quantity,mostly delivery in 30 days. Q6. Why choose us? 1. We are Songyin Leading supply of Strut Channel and Fittings. 2. Inspected by the Inspection Institution by standard of DIN-ISO-2768 3. 100% QC inspection before Shipment.
Lifetime 20ft x 8ft (6 x 2.4m) Rough Cut Dual Entry Outdoor Storage Shed - Model 60351 Features - Made from High-Density Polyethylene (HDPE) - The Rough Cut texture has the natural look and feel of wood without the maintenance of painting or staining - Customisable shelving - UV and weather resistant - Floor included - Level base required Lifetimeâ??s 20-foot wide sheds are not only built for superior strength and durability, but they also have an attractive appearance and design to accent the beauty of your garden. The convenient, centralised location of the doors allow for easy access to your storage without having to climb over things to reach items stored in the back. The innovative design and durable construction create the perfect solution to your storage needs. Features: Made from High-Density Polyethylene (HDPE) The Rough Cut texture has the natural look and feel of wood without the maintenance of painting or staining Heavy-duty steel trusses provide additional roof strength UV protected to prevent weather damage High-pitched roof allows for quick drainage of rain and snow 18 wall hooks and 1 rectangular shelf (W 228 x D 22 cm) and 2 corner shelves (24cm radius) included for custom organisation Lockable steel-reinforced doors (lock not included) Low maintenance design Skylights allow natural light to illuminate interior Two screened vents allow airflow Assembly time: 3 people, 10-12 hours Dimensions Footprint: W 606 x D 237 cm External: H 241 x W 606 x D 243 cm Internal: H 190 x W 595 x D 217 cm Internal Capacity: 30.98 m�³ (867.2 ft�³) N.B. Please note a level foundation is required (concrete, slabs, or a timber frame). Please check full contents, footprint and measurements before installation. If you are enlisting the help of a third party to install this product, please ensure that all contents have been received in full and undamaged prior to arranging and paying for installation to take place. Accessories are not included. Premium Installation Service: Choose our Premium Installation Service at checkout with your chosen structure and enjoy the comfort of knowing that installation is taken care of by skilled and trained installers. The installation office will contact you to guide you smoothly through the process and ensure you are happy with your purchase.
Experience the rich and robust flavours of Motjuan's premium Ugandan Robusta green unroasted coffee beans, screening 18, 15, and 12, offering exceptional quality and meticulously sourced from local cooperatives and producers in the lush highlands of Uganda. As manufacturers, processors, and wholesalers, we ensure top-quality beans are processed in state-of-the-art facilities in the United Arab Emirates. With a production capacity of up to 200 metric tons per month, we cater to global demands, offering end-to-end solutions including sourcing, export/import, and processing. We deliver in ExWork, FOB, and CIF terms, with a minimum order of one container (19.2 metric tons, 320 bags x 60kg unroasted green beans). Quality assured by SGS inspection. We also offer 250g samples of green bean coffee, with additional samples available upon invoicing.