BR Camlock coupling (cam and groove quick coupling) specifications Standard of our BR cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our BR camlock coupling: • Sand casting Specification of our BR camlock couplings: • Sizes available: from 1/2" to 6" • Types available: A, B, C, D, DC, DP, E, F Body material of our BR kamlock fitting • Brass Cam levers of our BR camlock fitting: • We use stainless steel cam levers or brass cam levers. Pins, Rings and Safety clips of our BR kamlock: • We use steel plated Pins, Rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en laton: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en laton: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc.
AL Camlock coupling (cam and groove quick coupling) specifications Standard of our AL cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our AL camlock coupling: • Gravity casting Specification of our AL camlock couplings: • Sizes available: from 1/2" to 8" • Types available: A, B, C, D, DC, DP, E, F Body material of our AL kamlock fitting • Aluminium A356 or A104 Cam levers of our AL camlock fitting: • We use stainless steel cam levers or brass cam levers. Pins, Rings and Safety clips of our AL kamlock: • We use steel plated pins, steel plated rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en aluminio: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en aluminio: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
SS Camlock coupling (cam and groove quick coupling) specifications: Standard of our SS cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our SS camlock coupling: • Investment casting Specification of our SS camlock couplings: • Sizes available: from 1/2" to 6" • Types available: A, B, C, D, DC, DP, E, F Body material of our SS kamlock fitting • CF8M casting (SS316) • CF8 casting (SS304) • Other material are available on request Cam levers of our SS camlock fitting: • We use stainless steel cam levers. Pins, Rings and Safety clips of our SS kamlock: • We use stainless steel Pins, Rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en acero inoxidable: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en acero inoxidable: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT). We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
AL Camlock coupling (cam and groove quick coupling) specifications Standard of our AL cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our AL camlock coupling: • Gravity casting Specification of our AL camlock couplings: • Sizes available: from 1/2" to 8" • Types available: A, B, C, D, DC, DP, E, F Body material of our AL kamlock fitting • Aluminium A356 or A104 Cam levers of our AL camlock fitting: • We use stainless steel cam levers or brass cam levers. Pins, Rings and Safety clips of our AL kamlock: • We use steel plated pins, steel plated rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en aluminio: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en aluminio: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
we specialize in: chain couplings, Jaw couplings, flexible couplings, HRC couplings, NM couplings, MH couplings, Pin coupling, Spacer Coupling, Flange Coupling, Sleeve Coupling, nylon sleeve coupling. We also can supply products according to drawings or samples. Please feel free to contact us with any enquiries.
Single Arch Rubber Expansion Joint Features: -Working pressure ratings up to 150 psi,Temperature ratings to 250°F -Vacuum ratings to 15 in.Hg -Allows for greater motion capabilities than general expansion joint -Excellent for absorbing thermal expansion,eliminating vibration&sound -Gaskets and packing not required -Absorbs water puisation and protects against start-up surge force Rubber Expansion Joint EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar.
Ductile Iron GGG50,GJS500-7,GGG40 Size: DN40-DN2000 Pressure: PN10,PN16,PN25,PN40,230psi Pressure Test: 15Bar, 24Bar, 37.5Bar, 350psi EPDM, NBR Rubber Seals to EN681 & ASTM D2000. Painting: RAL5017 FBE coated, Min., Coating Thickness 200m. Connected Pipe: DI Pipe, PVC/UPVC Pipe, Steel Pipe and Part AC Pipe.
Ductile Iron GGG50,GJS500-7,GGG40 Size: DN40-DN2000 Pressure: PN10,PN16,PN25,PN40,230psi Pressure Test: 15Bar, 24Bar, 37.5Bar, 350psi EPDM, NBR Rubber Seals to EN681 & ASTM D2000. Painting: RAL5017 FBE coated, Min., Coating Thickness 200m. Connected Pipe: DI Pipe, PVC/UPVC Pipe, Steel Pipe and Part AC Pipe.
Cardan shaft, universal joints, cardon coupling.
The universal coupling is a kind of shaft coupling that permits large angle displacement between the shafts, specially used for connecting shafts in that condition. The compact design of radial external dimension ensures convenient maintenance, large transmitting torque, high efficiency, long service life and low noise during working. Driving of intersecting shafts can be delivered. The large designed shaft angle can be altered during its running and the maximum shaft angle can reach 35 degrees. When a single universal coupling is used, the speed of driven shaft will fluctuate periodically. And this is mainly used for the transmission connecting of the intersecting shafts. Due to such features as large deviation angle and transmitting torque, the universal couplings are widely applied in Metallurgical machinery, steel rolling machinery, mining machinery, textile machinery, paper machinery, cement machinery, hoisting and conveying machinery, petroleum machinery, electrical machinery, chemical machinery, shipbuilding,etc. various conditions of universal machinery and heavy machinery.
Torque limiter Kr-sc-4.0 ball indent torque limiter In case of overload, the ratchet parts balls leave their indentations, and a relative motion between the driving and driven side is produced. In this way damages due to overload are avoided. The shaft ring makes an axial motion to the shifting way "s" and activates the limit switch or proximity initiator, the signal can be used for control functions or for disconnection of the drive. For the restartáit would reach after the overload eliminated the ball which was rotating in the keeping rotating vest automatically in the next indentation then the driving and driven side was returning normal rotation with an angle returned mutual. According to customers' requirement
Specificationsciclz type drum shape gear coupling m shaped tooth type coupling drum shaped tooth surface make within, and outside tooth of contact conditions are improve, avoid has in corner displacement conditions xia straight tooth tooth end edges side extrusion, stress concentrated of disadvantages, while improve has tooth surface friction, and wear situation, reduced has noise, maintenance cycle long. 4, outside the drum shape teeth-formula shaft coupling gear teeth is trumpet shaped, inner and outer gear assembly and disassembly is easy. 5, drum shape teeth-formula shaft coupling transmission efficiency as high as 99.7%. Scripture-based features, now widely at home and abroad to drum gear replace gear type coupling. For request
Ntroduction Flexible pin coupling is the made of certain non-metallic material elastic pin, placed two coupling halves flange holes through pins to achieve two half coupling connection. Specifications hl flexible couplings 4. Low noise 5. Transmission efficiency loss, long useful working life. For request
Specifications 1. Model: ngcl1-ngcl14 2. Nominal torque: 355-100000 6. Rich experience working with big companies in this field 7. Iso9001 certified Features: 1. Widely used in various mechanical and hydraulic fields 2. Low-cost maintainance 3. Compensation for axial, radial and angular misalignment 4. Convenient axial plugging assembly 5. Installed horizontally and vertically without using any soeciao tools. 6. Excellent mechanical properties 7. No brittlement at low temperature 8. Good slippery and frictional properties 9. Exellent electrical insulation For request
Roller chain coupling introduction: The chain coupling is composed a duplex roller chain and two sprockets. The function of connection and datachment ations. Applications include power transmission to industrial equipment such as pumps, gear boxes, compressors, blowers, mixers, and conveyors. Specifications 1. Protective cover and o-rings included 2. Model: gl1-gl15 3. High flexibility 4. Iso9001 5. Double rolling chains are gb standard chain 6. The cover size is designed by your requirement 7. The converse transmissiom is overload compact is prohibit construct is simple, it is convenient to knocked-down Our coupling details: 1. Material: stainless steel, c45 steel, aluminum, rubber and plastic etc. 2. Oem and odm are available 3. High efficient in transmission 4. Finishing: blacken, phosphate-coat, and oxidation. 5. High quality with better price 6. Different models suitable for your different demands 7. Stock for different bore size on both sides available. 8. Application in wide range of environment. 9. Quick and easy mounting and disassembly. 10. Resistant to oil and electrical insulation. 11. Identical clockwise and anticlockwise rotational characteristics. 12. Small dimension, low weight, high transmitted torque. 13. It has good performance on compensating the misalignment For request
Diaphragm-type flexible coupling uses flexible metallic components to deliver torque from the driver to the follower as well as to compensate the relative displacement between 2 axes in 3 directions. It boasts advantages like big 3. Long life service. 4. Operating at high temperatures(less than 300oc) in adverse environmental conditions, such as corrosive environments. 5. Accommodate axial and angular misalignments, absorb and isolate vibration. 6. Simple construction, operating with high reliability. 7. No. Noise, zero backlash. Constant speed and no lubrication. 8. Less additional load on connecting equipment. Specification: 1) torque range: 9.8n. M - 173830n. M 2) allowable speed n= 2000-20000 r/min 3) finish bore available from 5~290mm 4) available double disc coupling, the spacer can accord with customer-side. 4) forged #45 steel raw material for the hub, and stainless steel material for disc. 5) the disc coupling is a drive unit which uses the flexible disc to transfer the torque 6) the coupling has heat-resisting, corrosion-resisting, lubrication-free, long service life 7) it can be almost used in all power transmission. Easy to use, power-saving, environmental protection For request
Model: gsl-z200 to gls-z760 Nominal torque: 31500-1600000n. M (31.5- 1600 kn. M) Bore length: 710-1920mm Outer dimeter: 200-760mm All of our couplings are wildly used in metallurgy industry, iron & steel industry, petroleum industry, chemical industry and paper making, such as metal machinery, rolling mills, mill machines, cranes, non ferrous metal, oil machinery, and plastic machines. If you have any requirement, please make a definite declaration. We will make a specific product solution designed for you based on the data and drawings you have provided or on the written agreement between us and relevant technical documents and data. For request
5. Installed horizontally and vertically without using any soeciao tools. 6. Excellent mechanical properties 7. No brittlement at low temperature 8. Good slippery and frictional properties 9. Exellent electrical insulation 10. Resistance to chemical corrosion 11. Torque range from 2.94um to 1087.8um For request
Specifications 1. Model: Wgp1-wgp14 4. Best After-sale Service 5. Always Responsible And Reliable 6. Rich Experience Working With Big Companies In This Field 7. Iso9001-2008 Certified Features: 1. Widely Used In Various Mechanical And Hydraulic Fields 2. Low-cost Maintainance 3. Compensation For Axial, Radial And Angular Misalignment 4. Convenient Axial Plugging Assembly 5. Installed Horizontally And Vertically Without Using Any Soeciao Tools. 6. Excellent Mechanical Properties 7. No Brittlement At Low Temperature 8. Good Slippery And Frictional Properties 9. Exellent Electrical Insulation For Request
Spider coupling/jaw coupling/couling with elastic spider ue. 2. Getting the drive vibration buffer, and absorbing the impact generated by motor's uneven operation 3. Effectively correcting the installation deviation of axial and radial and angular 4. Coupling assembled by pressing a polyurethane sleeve into hubs on both sides 5. Oil resistance and electrical insulation 6. Identical clockwise and anticlockwise rotational characteristics 7. Three different rigidity sleeves available. Jaw coupling application: Servo systems, main spindle transmission, lift platform machine transmission, gearbox motor etc. Features of jaw coupling: Compact, zero backlash, three different spiders are available, absorbing shock, compensating the deviation in radial, angle and axle; simple structure, easy checking and maintenance, oil resistance and electrical insulation Foxslide oem service: 1. With keyway or without keyway 2. The material: aluminum or stainless steel and so on, just follow your requirements 3. Coupling are available according to your drawing and technical requirement. 4. Exclusive and unique solution can be provided to our customer by experienced engineers and sales staff. For request