We take pleasure to introduce ourselves as one of the renowned supplier, wholesaler, importer, exporter, trader of Pure Nickel Plates. The offered nickel plate is precisely designed in compliance with the international standards of quality and durability. This nickel plate is properly tested on various parameters in order to supply a faultless range. We are giving this nickel plate in varied specifications & customized options in order to fulfill the demand of customers. Features: Longer service life Best in use Easy installation
Inconel 625,Incoloy 825,Monel 400,Monel K500. Grade:UNS N06625,UNS N08825,UNS N04400,UNS N05500. Standard:GB/T 2882. Delivery status: soft state (M), hard state (Y). Surface state: black skin state, car light state, grinding state, pickling state. Specification: outer diameter 3.18-114.3mm, wall thickness 0.5-7.11mm, length 18000mm.
Standards ASTM B160 F1554 ASME SB160 SF1554 Dimensions DIN 931 933 934 7991 976 125 ASME B1821 B183 Fasteners size Bolt Screw Size M3 M56 36 to 2 Custom Sizes Nuts Size M3 M56 36 to 2 Custom Sizes Washers Size M3 M56 36 to 2 Custom Sizes Machine Screws Size M16 M12 Self Tapping Screw Size No2 No 14 Length 3 mm to 200 mm Threads UNF BSW BSF METRIC UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing SelfColour Passivated Bright Zinc Plated BZP Hot Dip Galvanised HDG Sherardized some special one like DACROMET Geometry and Mechanically Applied coating Dacroment nickel plated anodizing plated zincnickel Zinc blue black yellow white black oxide
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2 (15 NB) to 48 (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Specifications ASTM B366 / ASME SB366 Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Size Seamless Butt Weld Fittings: 1/2â?³ â?? 10â?³, Welded Butt Weld Fittings: 1/2â?³ â?? 48â?³ Type Seamless / Welded / Fabricated Schedule Sch 5 TO Sch XXS. Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Purity: 99.76% Diameter: 0.025 mm Quantity: 120 Kg Locations: Germany & Switzerland INCO Terms: EXWorks /FOB or negotiated between Buyer and Seller Minimum quantity: 10 KG Origin: European countries Material certifications: Institut fur settene Erden und Metalle e.V. (ISE) 2020; Independent Global Assaying Services (IGAS) 2018
ASTM Tubes, SS Tubes, 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760), High Nickel Alloy Tubes, supplier. TYPE : SEAMLESS / ERW / EFW / WELDED / CDW RANGE : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness. FORM : ROUND, SQUARE, RECTANGULAR, COIL, \'U\' SHAP, PAN CAKE. LENGTH : SINGLE RANDOM, DOUBLE RANDOM & REQUIRED LENGTH ENDS : PLAIN END, BEVELLED END, TREADED OTHER : â?¢ HYDRAULIC TUBE â?¢ CAPILLARY TUBE â?¢ HORN TUBE â?¢ BOILER TUBE â?¢ IBR TUBE â?¢ PRECISION TUBE Stainless Steel Tube : Standard� : ASTM / ASME A/SA 269 / 213 / 249 Grade� : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Duplex & Super Duplex Steel Tube : Standard� : ASTM / ASME A/SA 240 / 790 / 815 / 928 Grade� : 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760) Aluminium Tubes : Standard� : ASTM B 241 Grade� : 2024, 6061, 6063, 6082 & 7075 Titanium Tubes : Standard� : ASTM B 338/ASME SB 338 /ASTM B 337/ASME SB 337 /ASTM B 861/ASTM B 862 Grade� : Gr1,Gr2,Gr3,Gr7,G9,Gr11, Gr12,Gr16,Gr17 Carbon Steel tubes : ASTM / SA 179 / A 210 GR.A / BS 3059 GR.360 & 440 Alloy Steel Tube : Standard� : ASTM / ASME A/SA 213 Grade� : T1, T5, T9, T11, T12, T22, T91 Copper Alloy Tube : â?¢ Copper Tube : Electrolytic / Dioxide â?¢ Copper Nickel Tube / Cupro Nickel Tube :ASTM / ASME SB 111 UNS NO. C 70600 ( CU -NI- 90/10) / C 71500 ( � � � CU -NI- 70/30) / C 71640 ( CU-NI-66/30/2/2) â?¢Admiralty Brass Tube : ASTM / ASME SB 111 UNS NO. C 44300 ( ALLOY 443) â?¢Aluminium Brass Tube : ASTM / ASME SB 111 UNS NO. C 68700 ( ALLOY 687) TEST CERTIFICATE : Mill Test Certificate as per EN 10204 / 3.1 Types Of Tubes â?¢ SS 310 / 310S SEAMLESS Tubes â?¢ Duplex Steel UNS S31803 Tubes â?¢ Stainless Steel 304 / 304L Tubes â?¢ Duplex Steel SEAMLESS Tubes â?¢ Stainless Steel 316 / 316L ERW Tubes â?¢ Duplex Steel UNS S32205 Tubes â?¢ Stailess Steel 321 / 321H Tubes â?¢ Super Duplex UNS S32750 Tubes â?¢ Monel 400 EFW Tubes â?¢ Hastelloy C276 ERW Tubes â?¢ SS Tubes â?¢ Steel Tubes â?¢ Inconel 625 WELDED Tubes â?¢ Alloy 20 EFW Tubes â?¢ Cu-Ni 70/30 (C71500) Tubes â?¢ Cu-Ni 90/10 (C70600) Tubes â?¢ ASTM A105 Tubes â?¢ ASTM A350 LF2 / LF3 Tubes â?¢ Inconel 600 SEAMLESS Tubes â?¢ Hastelloy B2 Tubes â?¢ SS 317 / 317L Tubes â?¢ Super Duplex WELDED Tubes â?¢ SS 347 ERW Tubes â?¢ Super Duplex UNS S32950 Tubes â?¢ Monel K500 Tubes â?¢ Hastelloy C22 SEAMLESS Tubes â?¢ Stainless Steel 446 Tubes â?¢ ANSI Tubes â?¢ Inconel 718 EFW Tubes â?¢ 904L Tubes â?¢ Incoloy 800 Tubes â?¢ Titanium Gr 2 Tubes â?
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
Cupro Nickel Tubes 95/5, 90/10 & 70/30 Automobile Industries : he Move toCopper-Nickel Tubing Copper had been provedsince the early days to have many good attributes. It was easy to bend and hadvery high corrosion resistance, but there was concern about its lowcorrosion-fatigue strength. When copper-nickel was introduced, it displayedcorrosion resistance similar to copper, higher general strength and betterfatigue strength. Good formability allows ease of flaring and bending, andalthough the metal cost is greater than that of steel alternatives,copper-nickel is very attractive in view of its extra life, trouble-freeinstallation and safety/reliability characteristics. Properties ofCopper-Nickel Brake Tubing The copper-nickelalloy used for brake tubing typically contains 10% nickel, with iron andmanganese additions of 1.4% and 0.8% respectively. The product conforms to ASTMB466 (American Society for Testing and Materials), which specifies dimensions,tensile strength and yield strength. Formability and internal cleanlinessconform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturersand Traders). Also, the alloy meets the requirements for pressure containment,fabrication and corrosion resistance for ISO 4038 (International StandardsOrganization) and SAE J1047. The mechanicalproperties of alloy C70600 in comparison with steel and copper are shown inspecification. Alloy C70600 isnormally supplied as redrawn tubing in the annealed condition. The combinationof strength and good ductility give excellent formability. As copper-nickel issofter than steel, it was first feared that fretting might be a problem.Experience has shown this is not the case. Copper-nickel braketubing provides superior reliability and assures both manufacturers and vehicleowners improved durability for effective long-life functioning of the brakesystem.
Cupro Nickel Tubes 95/5, 90/10 & 70/30 Marine Application : These Cupro Nickel tubes & pipes for Marine application are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.
Finishing - Polished Length - 400-500mm Grade - 201 Product Supply Type - Manufacturer, Exporters, Suppliers, Importer, Trader Products Detail Shape - Round Material - Nickel Length - 400-500mm Application - Gas Supplying, Heating Fabricators Finishing - Polished Color - Grey Grade - 201
Length - 300-400mm Application - Heating Fabricators Grade - DIN, GB, JIS Condition - New Finishing - Polished Dimensions - 90-100mm
Material - Nickel Shape - Round Length - 400-500mm Application - Gas Supplying, Heating Fabricators Grade - 201 Color - Grey Finishing - Polished
Nickel Alloy Tubes, Application : Heating Fabricators Grade - DIN, GB, JIS Dimensions - 90-100mm Length - 300-40 0mm Product Supply Type - Manufacturer, Exporters, Suppliers, Products Detail Condition - New Dimensions - 90-100mm Finishing - Polished Application - Heating Fabricators Grade - DIN, GB, JIS Length - 300-400mm
We deals in the following products of India, China, Taiwan and Korea Origin:- 1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.) 2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.) 3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.) 4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.) 5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless) 6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7) Heavy Duty Props & Light Duty Props. 8) Nuts, Bolts, Nails & Fasteners 9) System Scaffolding, Base Plate & Adjustable Base. 10) Steel Tie Rod, Waller Plates and Wing Nuts. 11) Drop Forged and Pressed Sheet Metal Couplers of all types. 12) Steel Billets, Steel Angle & Steel Channels. Price: After receiving complete details
We deals in the following products of India, China, Taiwan and Korea Origin:- 1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.) 2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.) 3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.) 4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.) 5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless) 6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7) Heavy Duty Props & Light Duty Props. 8) Nuts, Bolts, Nails & Fasteners 9) System Scaffolding, Base Plate & Adjustable Base. 10) Steel Tie Rod, Waller Plates and Wing Nuts. 11) Drop Forged and Pressed Sheet Metal Couplers of all types. 12) Steel Billets, Steel Angle & Steel Channels. Price: After receiving complete details
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.