Htm Twin Screw Continuous Kneading Extruder Suppliers and Manufacturers

We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on. Salient Features of co-rotating twin screw extruder SAT65: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-400rpm 4) The output capacity: 150~250kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Air cooling die face cutting system with cyclone and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.

Sjsz conical twin-screw extruder Screw barrel:38crrm nitriding Hard tooth surface gear wheel box Vacuum venting device Forecd feeding system Electric macine; simenz Temperature controller: omron Frequency adjustment: helipu Power: 37kw Heater: cast aluminum stainless steel Size:4235*1520*2450 weight:4000kg

Jintech twin screw extruder

Specification: Screw diameter: d15- d 300 L/d ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case

Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize according to customers' requirements. The compression ratio of screws can be designed according to different products and ingredients. Base materials: 1)38crmoala(jis sacm645) 2)42crmo(aisi 4140) 3)4cr5mosi v1 (jis skd-61) 4)9cr18mov 5)hpt Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ¡ý 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case

Lab twin-screw extruder can value the processing materials by test the small amount, especially for hand sample evaluation for mass production, new formula research and development and pre-screening for pre-mixing materials. It can completely show the materials like color, surface, light, ingredient, properties and so on.Gongle small extruder can equip the PLC control and touch screen and completely record the data and its change. And it is the best choice for various institutes labs in universities and research institutes. Normal two size for lab twin screw extruder Type NoSeriesD(mm)L/DMax. R/MinPower (Kw)T(N/m)T/A³Capacity(kg/h) KC-20A2132-486004304.82-10   KC-30  A3032-485007.5854.810-30 B60011854.810-40 C500151106.215-55 D60018.5140830-75   Main features for laboratory extruder: 1. Very low energy-consumption  2. PLC touch screen operation and visualization 3, Record the data and visualization of data change 4. Can process standard-sized granules 5. Back pull screw with self-cleaning. Characteristic for Gongle Co-rotating Parallel Twin Screw Extruder: 1, Cordwood type screws 2, Sectional type barrels 3, Heating and cooling separately each section 4, Screen change with one-body casting 5, Base support is one plate bending without steel sheet sectional

China hot sale pvc twin screw extruder SHJ SERIES CO-ROTATING TWIN SCREW EXTRUDER TECHNICAL PARAMETER MODEL SHJ-20 SHJ-30 SHJ-36 SHJ-43 SHJ-50 SHJ-63S SHJ-72 SHJ-72M SHJ-92 SHJ-92M SHJ-133 SCREW DIAMETER 21.7 30.5 35.6 43 50.5 62.4 71.7 71.7 92.4 92.4 132.2 SCREW DEPTH 3.85 4.6 6 7.5 9 11 12.6 12.6 15.5 15.5 23.6 L/D 32~40 34~49 35~50 35~55 32~56 32~56 32~56 44~56 32~56 32~56 32~56 ROTATING SPEED 600 600 600 600 600 600 600 600 600 600 400 MOTOT POWER 3 (4) 11~18.5 15~30 15~30 45~90 45~90 110~250 160~250 250~540 315~540 600~800 CAPACITY 2~12 30~60 40~80 40~80 80~200 150~450 300~800 600~800 600~1500 800~1500 1500~2500 EQUIPMENT IS MAINLY COMPOSED: 1) double-screw extruder 2)double-plunger hydraulic network 3)hydraulic bypass valve 4)under water pelletizing system(underwater pelletizing machine, centrifugal machine, water pipe, electrical control system). The advantages of underwater pelletizing machine system: 1)Outstanding quality of particle 2)High efficiency 3)Strong reliability 4)Safe operation 5)The special formula plastic granulation 6)High output 7)Small noise Our services 1. Purchase Service LAIZHOU CHIYUAN has a special and efficient working team. If you are new in the printing and packing area, some samples of your products could be sent to us, and we can give you some professional suggestion. 2. Shipping Service LAIZHOU CHIYUAN has an independent department for shipping. Our Colleagues are familiar with T/T and L/C and all documents could be made efficiently and carefully. We can provide the economic shipping way for you. 3. Installation & Clients Training Services LAIZHOU CHIYUAN can appoint engineers to provide installation and technical support to your company. 4. After Sale Service LAIZHOU CHIYUAN machines have at least one year warranty, also we could provide some spare parts for free.

ITEM SPECIFICATION MODEL WDE-5018 CAPACITY 250-350KG/H SCREW TYPE TWIN SCREW SCREW L/D 18:1 SCREW SPEED 0-700 R/MIN SCREW DIAMETER 50 MM MAIN MOTOR POWER 30 KW HEATING TYPE ELECTRICAL PIPES HEATING ZONE THREE COOLING TYPE WATER HEATING PIPES POWER 6.4 KW DRIVE MOTOR BRAND SIEMENS BRAND ELECTRICAL COMPONENTSBRAND Schneider FREQUENCY INVERTERBRAND Schneider ELECTRICAL POWER SPECIFICATION 380V 50 HZ, 3P.

As the segment structure design, the equipment can be configured with different l/d, barrel designs, screen changer, pelletizing system, and/or electric control, to best meet unique requirements of different process. Cause our better understanding of the different material, the screw con? guration is designed based on rich experience and software technology to accomplish the material conveying, plasticizing compounding, shear and dispersion and pressurization. Screw elements, accurately designed with cnc technology, are fully intermeshed, providing self-cleaning and easy interchangeability. Upgrading accuracy and quality of the standard and high torque gear box. The special new type barrel structure and screw elements been manufactured with our powerful design experience. Typical application Filler modification -caco3 -talc powder -barium sulfate -ceramic powder -wood/plant fiber -other inorganic fillers Reinforce modification -short glass fiber -long glass fiber -carbon fiber -other whiskers Masterbatch -carbon black masterbatch -color masterbatch -flame retardant masterbatch -degradable masterbatch -other function materbatch Compounding modification -thermoplastic/elastomer -polymer alloy Seaworthy packing

Hte series high torque twin screw compounding extruder set The structure and basic principle is similar with te series. Hte series comprehensive increase the application and ability of products with original german high torque gear box, lubricating system and torque limiter, Screw elements and key part of extruder, accurately manufactured with cnc technology which guaranteed the process accuracy effectively. Reasonable space and personnel usage with hte series Typical application Reinforce modification -short glass fiber -long glass fiber -carbon fiber -other whiskers Compounding modification -thermoplastic/elastomer -polymer alloy Seaworthy packing

Specifications: Plastic granulating line 1.Buiding block principle for a large variety of applications.Processing tasks can be optimally accomplished with only a few barrel and screw variations. 2.New design gearbox with high torque and high speed up to 600rpm. Receive the high output. 3.Iso9001 certificates kaiyou 4.Maching centers assures productsí» high quality. 5.Kaiyou manufactures and assembles a wide variety of auxillary devices. 6.Advanced plc control system. 7.A variey fo palletizing paterns can be choosed according to requirements. 8.High quality and competitive price Suitable for: 1.Polymer blending & filling modification 2.Engineering polymer & glass fiber reinforcement 3.Masterbatch, fuctional parent granule, special material, powder coating material and cable material reactive extrusion, degassing & devolatilization Model: hky-35 Screw diameter: 35.6mm Groove depth: 6mm L/d: 32~56 Main motor power: 18.5kw Screw speed: 600rmp Capability: 5-80kg/h Model: hky-50 Screw diameter: 50.5mm Groove depth: 9mm L/d: 32~56 Main motor power: 55kw Screw speed: 600rmp Capability: 100-300kg/h Model: hky-65 Screw diameter: 62.4mm Groove depth: 11mm L/d: 32~56 Main motor power: 90kw Screw speed: 600rmp 0

Features of the machine Because of the modular design of scroll and barrel, the model of thread, structure of barrel, draw ratio, feeding and exhaust data, conversion of network, the model of granulation, the electric equipment control mode can all be optimized and adjusted in the light of material system and the technological requirements. It is multifunctional as well as built for a special purpose. The machine is efficient with low specific energy consumption. The functional characteristics of TE series Bitruder include homoge neity, plastifying dying, fallibility, enhancement recovery and granulation. The host machine has modular design and the structure of screw and brrel are designed with precision by computer. It has perfect self purification and interchangeability. With planar triaxial reinforcement design and large safety capacity, new transmission torque dispensing equipment processes gear through high groove gear grinding. All the critical bearing is imported. The lubrication system is under interlock protection. The safe and reliable equipmene can stand wear and tear. Spiral shell's pole component of host computer connects with core axle and adopts the advanced involute spline to join the form. Change spiral shell pole association at will, in order to meeting different high polymer new material new technological requirements. The machine possesses various feeding structure and system. In accordance with different states of materials, the client may choose among single-scroll, twin-scrool, hollow spring engagement, nonengagement, forced side feeding and other modes. Fine vacuum exhaust and take off and wave device is effectively at to volatilize the composition supplies, Moisture and gas through releasing person who congeal the methods of vacuum discharge and shed, raise goods quality. In accordance with different technological rechirements, water cooing, oil cooling and qir cooling may be utilized. Various granulating systems, Air-cooling stick-drawing and particlecutting, air-cooling stick-drawing and particlecutting, aircooling rubbed thermal particlecutting, water-ring rubbed thermal particlecutting, off-centered spray thermal particlecutting and under rubbed thermal particlecutting. model Screw diameter (mm) Screw Rotary Speed (rpm) Motor Power(kw) L/D capacity (kg/h). TE-35 35.6 600 11-15 32-56 30-75 TE-50 51.4 500/600.

Over 29 years experience in screw and barrel , more info pls find kaylee(at)tizatech.com Specification: Diameter: Ã?15-Ã?500 L/D ratio:15-55 Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr Bimetallic Alloy Materials: 1)Fe-based alloy 2)Ni-based alloy 3)Co-based alloy 4)Tungsten carbide Processing Technology: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Technical Parameter: Nitrided layer depth:0.50-0.80mm Nitrided hardness: 900-1100HV Nitrided brittleness: Less than 2 level Surface roughness: Ra 0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness: â?¥950HV Chrome-plating layer depth: 0.025~0.10mm Bimetallic layer depth: 2 mm Bimetallic hardness: HRC50-65 Material to be extruded: PP, PE, PVC, ABS, AS, PS etc. We can manufacture all types of screws and barrels according to clientsâ?? requirement

Specification: Screw Diameter: D15- D 300 L/D ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base Materials: (1)38CrMoAlA(JIS SACM645) (2)42CrMo(AISI 4140) (3)4Cr5MoSi V1 (JIS SKD-61) (4)9Cr18MOV (5)HPT Bimetallic alloy materials: 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy 3)Co-based alloy 4)NiCo-based alloy 5)Tungsten carbide/Wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000HV Nitrided brittleness: less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950HV Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing Oil Coated& Film Wrapped in Wooden Case

Screw diameter: 35mm-200mm Length: less than 10000mm Barrel diameter: 35mm-200mm Material: 38crmoala; skd61; skd11; 40cr; 42crmo; high quality alloy steel Technology for tin coated screw barrel/: nitriding treatment, alloy coating spraying, heat-treatment, quenching Appliance for tin coated screw barrel/: pa, evoh, eaa, pc etc

Twin screw extruder food extruder from jinan reno company of china, we are special on snacks extruder machinery manufacturer and supplying . Our twin screw snacks extruder is slg70-ii extruder, output 150-200kg/hour, with the oil cooling system automaticly, the barrel cooling system too, twin screw feeder system, the screw length is about 1510mm.Diameters 70mm .

Planet roller extruder is composed of central shaft, planet shaft, rolling stuff barrel, case, heating and cooling parts, rozzel, and so on. The structure uses model system, and has good flexibility. Contacting area is five times previous extruders of single or two shafts and section shape is highly dispersed and uniform, so high quality products are obtained. JT series of planet screw extruder mainly are used for manufacturing thermal sesitivity materials hard and soft PVC and also for ABS, TPO, TPU, and the mixture of filler polyalkene and bond. Characterizes good plasticization, self-clean, high productility, long useful life and so on.

1.65/132 conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale Dimension:15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203

1.Cincinnati conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale 15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203