We produce pure and organic lavender water. The lavender water is produced via steam-distillation of fresh lavender blossoms, picked in our lavender fields located in the rose valley. We do not use any preservatives, additives, or synthetic ingredients. Our natural lavender water has a therapeutic effect due to its natural origin. Used in cosmetics: The natural lavender water is excellent skin toner, prevents skin dryness and gives fresh look of the face. Nourishes the hair and makes it soft and shiny.
Lavender oil is an essential oil obtained by distillation from the flower spikes of certain species of lavender. Our lavender essential oil is produced from flowers growing in higher elevations of Bulgaria. The oil has a fresh, soft and sweet aroma. Lavender is indigenous to mountainous regions of the Mediterranean countries and the black sea, gowning best in the poor, well-drained soils. Lavender oil, which has long been used in the production of perfume, can also be used in aromatherapy. It has a calming and regenerating effect over the human body. Lavender oil can be used as an antiseptic and pain reliever to be applied to minor burns and insect bites and stings.
The mentha water is steam distilled from fresh blossoms Bulgarian mentha piperita of during the months of may and June of each year. It is a completely natural product for skin and hair application. Transparent liquid, colorless; specific aroma; essential oil content 0.03, ethyl alcohol content 3.44, relative density 20 C 0.9827, PH 5.25, microbiological purity - corresponds to standard. Benefits: Has an antiseptic and anti-inflammatory effect on the skin. Soothes the skin after sunburns or razor cuts. Gently cleanses and tightens the pores of the oily skin. Moisturizes the skin and improves its general condition.
Natural pine water is obtained by the steam distillation of the needles, twigs and cones of pine tree. Here are some of the medicinal uses of the pine plant and pine water: Skin care: the most widely known use of pine essential water is in treating skin problems. Dermatologists often prescribe the water in treating the following conditions: psoriasis, itching, eczema, scabies, sores, and fleas; Cosmetics: pine essential water has a distinctive essence and gives a sweet aroma to the cosmetics it is used in. Pine plant water is widely used as massage water and in perfumes and other scents.
ROSE PEARLS is a GMO-free, natural product made of high-quality organic Rose Damascena oil from Bulgaria. Rose Damascena, also known to the world as the Oil giving Rose from Kazanlak, is the queen of flowers and the Rose valley in Bulgaria has become her kingdom. Our rose plantations are located in to the village of Skobelevo - in the heart of Bulgaria, an ecologically clean area at the foot of the Balkan Mountains. In order to extract the essential ingredients of roses, our company Alba Grups uses water-steam technology, a technology with tradition in distillation. We use no chemicals in our process. Hundreds of rose petals are needed to extract just one drop of rose oil. For a kilogram of rose oil we need about 4 tons of rose petals, nearly 1,660,000 freshly picked roses. Rose flowers are handpicked very early in the morning and are processed as fast as possible to keep the high quality of the oil. This makes it one of the most expensive essential oils in the world. Its quality, how it is used, and the way it benefits the body have been known to the world for centuries. Rose Pearls capsules are a food supplement and benefit the digestive and urinary system. They help strengthen and bring the bodies systems into harmony, including the respiratory, reproductive and immune systems. Only three pearls a day will make you feel healthy, alive and energetic.
Ethanol alcohol distillation column 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.  Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol . It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements. The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements. The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Frankincense Oil, Frankincense Hydrosol, Frankincense Powder (after Distillation Process).Frankincense ( boswellia sacra) frankincense products such as frankincense oil, frankincense hydrosol, frankincense powder (after distillation process) all our products are natural pure 100%
Food emulsifiers , sodium stearoyl lactate (ssl) , diacetyl tartaric acid esters of mono and diglycerides(datem), polyglycerol esters of fatty acids (pge), glyceryl monostearate(40gms), distilled monoglyceride(dmg), liquid distilled monoglyceride, glyceryl monolaurate(gml90), acetem(e472a), citrem(e472c), lactem(e472b), pgpr, bread improver, cake gel, cake gel emulsifiers(powder).
Sucrose fatty acid ester is a white to yellowish brown powder, lump or colorless to brown viscous resinous or oily substance, odorless or slight smell of oil. Soluble in ethanol, acetone, monoester soluble in hot water, but the diester and triesters are insoluble in water. Specifications Product nameSucrose fatty acid esters GradeFood grade CAS37318-31-3 Molecular weight608.76 Acid value(KOH)=6.0mg/g Free sugars=10.0% Moisture=4.0% Ash=4.0% Heavy metals=20mg/kg Lead(Pb)=2.0mg/kg Arsenic=1.0mg/kg Total nitrogen content=0.02% Loss on drying=4% Burned residue=1.5% Application of  Sucrose fatty acid ester Emulsifying agent, defoaming agent. Can be used for meat, sausage, emulsifying essence, fruit and fresh eggs, ice cream, candy, bread, natural pigment, congee, beverages, seasoning, ready-to-eat dishes, refined edible ester, fresh cream and similar products, pastries, baked goods, processed oil, wet flour products, etc. Packaging Sucrose fatty acid ester package: 25kg per bag woven bag or kraft paper bag or according to your requirement. Our Team Hangzhou GengYang chemical materials Co., Ltd is a professional supplier in chemical products development, production, sales for the integration of high-tech enterprises from 2010. The company's products are widely used in plastics, food, cosmetics and medicine and other fields. Our company insist on the market is the most important, we always have a good cooperation with all of our customers...We following the policy of "enterprising truth-seeking rigorous unity" forever, and constantly blaze new trails, the technology as the core, the goods quality as our life, all customers as our god, Let's offer you with the highest quality products, and like the member of our family's sales service.
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 8.3. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (4) It can make hot and spicy food more pliable and softer and prolong the preservation time. (5) It can produce smoother surface, lower broken ratio, higher soaking and boiling resistance for noodle, dried noodle and instant noodle, and make them chewier. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60 with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 % Technical Index Acid value(Calculated by KOH) / (mg/g) 60- 80 Ester value (Calculated by KOH) / (mg/g) 120- 190 Total lactic acid (W/%) 23.0-40.0 Sodium content(W/ %) 3.5- 5.0 Pb(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:25 KG/CTN(5KG *5) or packaged with moisture proof paper bag, 25kg/bag. Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Light Yellow Liquid, E code is E472A,Degree of Acetylation: 90% According to the degree of acetylation ,melting point and existence are different ,its dissolvable in oil 1. ACETEM can form a kind of films which can be used as a stable coating material for foodstuffs such as sausages or confectionery to avoid moisture loss and fat oxidation. 2. When the degree of acetylation more than 90%, the form of ACETEM is liquid under standard conditions and they can offer good lubrification properties. Therefore,ACETEM can be used as lubricants in food processing industry. 3. ACETEM is able to stabilize the alpha-fat crystal form of fats. Therefore, they can be used in whipped toppings to enhance the aeration and foam stabilization. And they can be used in shortening products to control the crystallization of fat. Packaging: 200KG / 25 KG DRUM Storage and transfertation: Seal to store in the low temperature, dry, cool and well-ventilated place, in order to prevent the moisture absorption and caking. Strictly forbid to store and transport with materials that is explosive, combustible or deleterious.
Characters: White powder or flake solid which is easily soluble in oils and hot grease, insoluble in cold water and can be dispersed in hot water. Applications: It has emulsifying, stabilization, dropping viscocity, control grease crystallization,resist starch aging, increase the gas-holding function. (1) Used in watery cream, and its stable, homogeneous, fine and smooth. (2) Used in meat products, avoid the water and oil separation. (3) Used in various grease, improve the compatibility of water and oil, avoid the water and oil separation. (4) Increase the dough toughness and gas-holding function, improve the construction, increase the bakery volume Usage and dose (1) Put this product into warm water at about 60 to get paste shaped substance, then use it as the suitable scale. (2) Used into watery cream, the max. dose is 5g/Kg, for others foods, can be used as the request. Technical Index: Acid Value(Calculated by KOH / (mg/g) Free Gycerol1.0 1-ester content 80 Ignition residue 0.1 Total lactic acid 20-38 Unsaponifiables 2.0 Moisture 0.5 Pb /(mg/kg 0.5 Packaging Aluminized bag vacuum packing with nitrogen inside, 20kg/carton(5kg/bag*4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 5.1. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. It can react with amylose to delay and prevent the food aging. It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (2) It can make hot and spicy food more pliable and softer and prolong the preservation time. (3) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60 with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 %( Calculated by Flour, Refer to GB2760-2011) Technical Index Acid value (Calculated by KOH) / (mg/g) 50- 86 Ester value(Calculated by KOH) / (mg/g) 125- 164 Total lactic acid (W/%) 32.0- 38.0 Calcium content (W/%) 4.2- 5.2 Pb / (mg/kg 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5KG *4) or packaged with moisture proof paper bag, 25kg/bag Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Characters: Yellow viscous liquid, insoluble in cold water and ethanol, soluble in hot grease, non-ionic water-oil emulsifier (W / O). Applications: No bad odor, has good thermal stability. Used in chocolate, add a small amount, can significantly improve the mobility of chocolate products, and save the amount of cocoa butter. Expedit the process of filling and mold forming for chocolate products, optimize the process and make the small bubbles to discharge easily, and then avoid occuring empty holes and pore in the chocolate products. Used with lecithin , has a good synergistic effect, thinning the thickness of chocolate coating to make it easy to process. In humid conditions, can reduce the viscosity. And form chocolate sugar coat quickly. And accelerate its conglutination. And increase adhesion, reducing the small pores. Opeartion method and dosage The suggestion of maximum in cocoa products, chocolate and its products, candy, chocolate coated products, ice cream coating: 5.0g/kg, oily-water fat emulsified products: 10g/Kg. Technical Index Poly glycerol(Dimer, trimer and tetramer glycerol)(w/%) 75 Poly glycerol(More than Heptamer)(w/%) 10 Pb / (mg/kg) 2 Packaging Plastic bucket or Iron bucket inner coating plastics, net weight is 25 kg, 180 kg. Storage and transportation: Sealed and stored in the cool, dry and well-ventilated place, avoid to put inversion, Forbid to store and transport with materials that is explosive, combustible or deleterious. The shelf life is 12 months.