Viscose Yarn Suppliers and Manufacturers

VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature. In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.

Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.

VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating. VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 â?¦C to 25 â?¦C. Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance. This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India. As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.

VG40 bitumen is used in areas in which high pressure comes from heavy traffic loads, such as intersections, near tolls booths, and truck parking lots. Due to the high viscosity of this bitumen, it is more appropriate for improving resistance to shoving and other problems associated with higher temperatures and heavy traffic loads. Itâ??s long time that industries use vg-40 instead of the penetration grade bitumen 40/50.

Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

Product Description : BLCO contain 17 product iterms Price of product ( USD price or FOB price) : FOB USD 13/4, CIF USD10/4, per barrel. Product origin : Nigeria Key Specifications/Special Features : NNPC STANDARD NNPC TECHNICAL SPECIFICATIONS: SPECIFIC GRAVITY: 0.8398 API AT 60 DEG. F: Min 34.00 5% (ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2% (ASTM D-4006) POUR POINT DEGREES F: BELOW 40 (ASTM D-97) SULFUR WEIGHT %: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: 3.0 (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG. C: 2.2 (ASTM D-523) DISTILLATION INITIAL BOILING POINT (IBP): 35 DEG. C (ASTM D-86) DISTILL TO 75 DEG. C VOL.%: 7.0 DISTILL TO 175 DEG. C VOL.%: 35.5 DISTILL TO 250 DEG. C VOL.%: 51.5 DISTILL TO 300 DEG. C VOL%: 60.5 COLOUR Dark Brown Minimum Order Size and Packgaing details : 2 Million, 4 Million and 10 Million Barrel, Minimum 2 Million barrel Vessel per month.

Starch 85 % Min. Moisture 13 % Max. Ash 0.20 % Max. Pulp 0.20 cc./50g. Max. pH 4.5 - 7 Viscosity 600 BU Min. Sulfur Dioxide(SO2) 100 ppm. Max Whiteness 90 % Min. Fineness 100 mesh 90 % Min.

USED ENGINE OIL SPECIFICATIONS Test Units Methods Result Density @ 15 �°C ASTM-D4052 0.88 Colour Max ASTM-D1500 6 Flash Point PMCC Min �°C ASTM-D93 70-80 Pour Point - Max �°C ASTM-D97 -7 Viscosity @ 50 �°C Cst ASTM-D445 60 Sulfur Content - Max WT% ASTM-D4294 below 0.5% Water WT % ASTM-D482 3% Appearance - Visual Black Sediment Below 0.5%

USED COOKING OIL SPECIFICATION Free fatty acids 3 Max MIUMoisture and Impurities 01 max Saponification value 181851955195 Iodine value 120 Titre C melting point 1375 C Specific Gravity 25C 0915 Density kgm3 920 Flashpoint by PM Degree C 220 Calorific Value kjkg 36 000 Kinematic Viscosity 40 degC mm2s Carbon Residue mass 04 Sulphur Content mgkg 16 Contamination mgkg 24 Acid Value mg KOHg 70 Oxidation Stability 110 degCh 50 min Phosphorus Content mgkg 15 Ash Content mass 001

This product is colorless or light yellow transparent oily liquid. Odorless, strong stability, not volatile, with good plasticizing Flame retardant, oil resistance, electrical insulation, easy to process. Insoluble in water, soluble in benzene, alcohol, ether, vegetable oil, mineral oil and other organic solvents. This product is an important oF vinyl resin and nitrocellulose plasticizer, used in the paint Film can increase the Flexibility, it has excellent intermiscibility, synthetic rubber, PVC, polyester, polyoleFin and soFt polyurethane Foam plastics Flame retardants, electronic potting glue can also be used For polyurethane. This product can give high polymer good abrasion resistance, weatherability, mildew resistance, radiation resistance and electric properties. This product adopts the new craFt improvement but becomes, belongs to the environmental protection product, in the production process basically does not have three wastes to produce, and the product low poison. Tricresyl phosphate (TCP) Alias:tricresyl phosphate triphosphate(3-methylbenzene) ester plasticizer TCP Molecular Formula C21H21O4P CAS number 1330-78-5 Son 368 Quality standar Appearance CLear liquid Chroma (pt-co) no 80 Acid value mgKOH/g 0.1 Relative density g/cm after (20C) 1.170-1.180 Flash point C 230 Free phenol % 0.1 Moisture % 0.1 Viscosity, mPa S (25 C ) 50-70 Phosphorus content % 8.4 Heat reduction % 0.1

MILK POWDER FAT FILLED 28% FAT Fat filled milk powders for beverages, yogurts Fat filled milk powders manufacturing technique Fat filled milk powder is obtained by blending high quality skimmed milk powder with vegetable fat. Powder is atomised (spray drying) in order to easily reconstitute the product. Fat filled milk powder is a total or partial whole milk substitute. This substitute has the same physical, chemical and organically properties as a dairy product. It helps reducing formulation costs for a product without any impact on its quality. In fat filled milk powders, proteins come indeed from non-fat milk solids, whereas fat is of vegetable origin. Items Standards Appearance White to cream colored powder Particle Size Min 95% pass 80 mesh Purity(dry basis) 99.5% Min Viscosity (1% solution, dry basis, 25â??) 1500- 2000 mPa.s Degree of substitution 0.6- 0.9 pH (1% solution) 6.0- 8.5 Loss on drying 10% Max Lead 3 mg/kg Max Arsenic 2 mg/kg Max Mercury 1 mg/kg Max Cadmium 1 mg/kg Max Total heavy metals (as Pb) 10 mg/kg Max Yeasts and moulds 100 cfu/g Max Total plate count 1000 cfu/g E.coli Netative in 5 g Salmonella spp. Netative in 10g Conclusion: The Goods Conform to the standards Of FCCV/E466 Packaging: 25 KG/BAG Shelf life: 24 months Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.