The Heavy-Duty Pneumatic Pad Printing Machine is a versatile and efficient solution for logo printing on a wide variety of materials. With its pneumatic technology, it delivers consistent and precise printing pressure and speed, ensuring sharp and accurate prints. Pneumatic Printing: Utilizes pneumatic technology to provide consistent and controlled printing pressure and speed, ensuring accurate and sharp prints on shoe soles and slippers. High Productivity: Efficiently handles high-volume printing demands, allowing you to meet tight deadlines and increase production output. Printing Capabilities: Supports single-color printing with a maximum cup diameter of 90mm, specifically designed for logo printing on shoe soles and slippers, providing versatility and customization options for your products. Compact and User-Friendly: Features a compact design saving space in your production area. Equipped with an electrical and pneumatic control system, making it easy to operate and adjust settings for precise and consistent printing results. Model Name B-900LK Maximum Cup Diameter 90 mm (Single Color) Maximum Print Speed per Hour 1800-2000 Print Area Diameter 85 mm Control System Electrical & Pneumatic Electric Consumption 240W Control Voltage 12 VDC Drive Electronic-Mechanical
Material: ZG35CrMo, ZG35, etc. Applicable equipment: rotary kiln, ball mill, mill Main materials: ZG45, ZG42CrMO Large girth gear is the main parts of rotary kiln, ball mill and dryer, needing to run for a long time. Its internal quality and installation quality directly affect the balance of the rotary kiln drive system, the stability of the rotary kiln operation, the service life of the kiln lining and the rotary kiln operation rate. Therefore, in the actual production of large girth gear product quality requirements are relatively high. Large girth gear is the core products of Tenfaye. The annual production can reach 500 sets, with a repurchase rate of 99%. Tenfaye has established long-term partnerships with CITIC Heavy Industries, Metso and MCC, etc .and has exported girth gear to the USA ,Finland, Korea, and Germany etc. Tenfaye has 17+ years steel casting experience for girth gear , we are large gear ring manufacture, and can provide the competitive price. To calculate the price based on the drawings of girth gear for ball mill or other machine.
FEATURES: Fazua Evation System, High Power density brushless DC motor Full SRAM Force Groupset with Hydraulic Disc Brakes High capacity removable battery in the downtube Fulcrum Racing 5 Disc wheelset T700 carbon fibre frame construction SPECIFICATION FRAME Pinarello Nytro T700 carbon fibre, asymmetric, internal cable routing, flatback tube profiles, aerodynamic frontal seat clamp, maximum tyre clearance 700x28C FORK Pinarello Nytro STEM Most X/A stem HANDLEBAR Most X/A handlebar FRONT BRAKE SRAM Force Hydraulic Disc REAR BRAKE SRAM Force Hydraulic Disc BRAKE LEVERS SRAM Force FRONT DERAILLEUR SRAM Force REAR DERAILLEUR SRAM Force 11-speed SHIFT LEVERS SRAM Force 2 x 11-speed CASSETTE SRAM Force 11-speed CRANKSET FSA compact 50/34 FRONT WHEEL Fulcrum Racing 5 Disc REAR WHEEL Fulcrum Racing 5 Disc FRONT TYRE Vittoria Zaffiro Pro REAR TYRE Vittoria Zaffiro Pro SADDLE Most SEATPOST Pinarello Nytro DRIVE SYSTEM Fazua Evation System, assisted up to 25km/hr, with four settings BATTERY Downtube mounted for better bike handling, 252Wh
Doocar automobile chassis repair system features: 1. Perfect combination of auto frame racks and repair benches. It is extra large size and heavy duty. 2. A phenomenal and multifunctional bench handling every type of automobile damage productively and accurately. 3. Compatible with measuring system and EVO Universal Anchoring & Holding system. 4. The straightening frame bench system provides bodyshop technicians a time-saving solution to easily and quickly diagnose, fixture and straightening, pulling and other repairs. 5. The bench height 380-1200mm, width 1180-2380mm, length 5000-5990mm keep technicians access the car chassis and make repair easily. 6. Removable ramps for easy vehicle access and acts as support and chocks. The drive-on ramps and ramp sections permit a vehicle to be driven onto the bench frame for quick anchoring of chassis clamp. 7. Two pulling towers with multi angle pulling allows the technician to access the collision vehicle from anywhere. 8. Fixed or pit mountings makes the bench system easy to fit into any workshop. 9. Meets most OEM equipment requirements further increasing your workshop's offering and profits. 10. The system meets the auto body frame repair of executive cars, SUV, pickups and utility trucks, MPV and commercial vehicles, heavy-duty all-terrain vehicles.
1. Introduction Chain Bucket Iron The Chain Bucket Iron Powder Dredger is a sophisticated, state-of-the-art device designed specifically for the demanding task of digging and screening sand and gravel, with a special emphasis on iron ore extraction. This advanced equipment boasts an integrated system featuring a chain bucket and a precision screening mechanism, enabling it to effectively harvest sand and gravel from various water bodies such as rivers and lakes. The device's standout feature is its ability to meticulously separate iron ore from other materials through its cutting-edge screening system. Operating on a principle that leverages the rotational prowess of the chain bucket, the dredger skillfully excavates from the water's bed, performing an initial screening to distinguish iron ore from impurities. Crafted with a focus on optimal efficiency, robust durability, and impressive adaptability, the Chain Bucket Iron Powder Dredger is engineered to thrive in diverse environmental and geological terrains. The screening system at its core employs specialized technical processes, harnessing the magnetic disparities of iron ore to maximize extraction efficacy. These processes encompass a range of advanced techniques like the strong and weak magnetic iron ore dressing process flows, ensuring proficient separation of iron ore. Techniques such as roasting magnetic separation, flotation, and high-intensity magnetic separation are deftly utilized, catering to a spectrum of iron ore grades, from low-grade to high-grade. As a result, the Chain Bucket Iron Powder Dredger stands as a paragon of efficiency and professionalism in iron ore extraction, adeptly equipped to meet the multifaceted needs of the modern steel industry through its meticulously developed mineral processing flow and technological innovations. 2. Features Advanced Control System: Operated by a state-of-the-art PLC control system, this dredger allows for seamless and highly efficient one-man operation, setting the standard for technological advancement. Efficient Cutter/Wheel Drive: Outfitted with a cutting-edge, high-performance cutter/wheel drive system, ensuring optimal operation and superior efficiency. Reliable Hydraulic System: Utilizes a robust and dependable hydraulic system, providing smooth and uninterrupted operation under various conditions. Fresh Water Cooling: Incorporates a sophisticated fresh water cooling system to enhance engine efficiency and performance.
The composite wood cladding of road and bridge pavement is a new type of pavement surface material, which is composed of two-component pavement and wear-resistant and antiskid aggregate. The pavement wood plastic composite cladding is mainly used in the construction and reconstruction of bridges to improve the wear resistance, anti-slip, anti-crack, waterproof and durability of the pavement. In addition, WPC panels can also reduce the thickness and load of the pavement, and adjust the color of the pavement. Characteristics of Wood future wood cladding Strong skid resistance, wear-resistance and drainage of wood plastic composite panel can shorten the braking distance by 40%, reduce road noise and driving water mist in rainy days and improve driving safety and comfort. Wood composite wall cladding panels are thin in thickness and light in weight. The minimum thickness of the cladding can be 5mm which will not affect the clear height of the tunnel, does not increase the bridge load and pavement thickness and makes the design more flexible. The construction speed with composite wood panels is fast, the road closure time is short. And the pavement structure is not changed (suitable for old pavement renewing). Most of composite wood wall panels features excellent durability, long service life, high-temperature stability, low-temperature crack resistance. Wood plastic composite panels are waterproof and corrosion-resistant, which can effectively prevent various corrosive medium from infiltrating with rainwater, and especially suitable for bridge deck. Wood plastic panels are environment friendly, no volatile solvent, no heating construction, energy-saving and emission reduction. The maintenance cycle of composite wall cladding can be extended from 3 - 5 years for ordinary asphalt pavement to more than 15 years, whether the WPC cladding cost of initial investment or long-term maintenance is lower than common asphalt pavement, long-term economic benefits are more obvious. Wall cladding products are rich in color, different aggregates can be used to obtain roads rich in color and texture. As a professional wpc composite decking manufacturer, sundi wpc provide wpc composite products, outdoor planter kits, imitation wood cladding, wood plastic composite panel and etc. If you want to know more about what is composite cladding ? Contact us.
Basic Info. Model NO. XK-LD120 Warranty 1 Year Color Multi Color Customized Customized Condition New After-sales Service Lifetime Technical Support Mining Object Sand, Mud, Slurry, Silt, Slush, Sludge, Salt, Iron Pump Warm Technology Patent No.of Color Zl 2013 3 0428530.2 Engine Weichai/Cumins/Jichai Water Flow 120m3/H Transport Package Container or in Bulk Specification CE, ISO9001, ZC, CCS, BV Trademark HENGPENG SHIPYARD Origin Shandong, China HS Code 890510002. Features Advanced Control System: Our China Heavy-Duty 120m3/T Chain Bucket Iron Dredger is equipped with a cutting-edge PLC control system, elevating operational efficiency to new heights. Experience seamless one-man operation, setting the benchmark for modern technological prowess in slurry handling. Efficient Cutter/Wheel Drive: Harness the power of our state-of-the-art, high-performance cutter/wheel drive system. Engineered for excellence, it ensures the dredger achieves optimal operation and superior efficiency across challenging environments. Reliable Hydraulic System: This dredger boasts a strong and reliable hydraulic system, designed to ensure smooth, consistent operations under a wide range of conditions, ensuring your projects proceed without a hitch. Fresh Water Cooling: Our sophisticated fresh water cooling system boosts engine efficiency and enhances overall dredger performance, ensuring powerful and reliable operation when it's needed most. Pre-Delivery Testing: Every dredger is meticulously assembled and undergoes rigorous quality testing prior to delivery. This guarantees top-notch performance and reliability, providing peace of mind and superior functionality. Quick Assembly: Designed for swift and straightforward assembly both afloat and onshore, this dredger minimizes downtime and optimizes productivity, making it an ideal choice for time-sensitive projects. Standard Design: Our dredger adheres to standard design principles, ensuring it meets the Coastal Waters Certificate requirements and complies with all relevant maritime regulations, safeguarding your investment. Spare Parts Availability: Enjoy peace of mind with readily available standard spare parts that are stocked for easy access. This facilitates efficient maintenance, keeping operations running smoothly and with minimal interruption. Optional Equipment: A diverse range of optional equipment is available to tailor your dredger to specific operational needs, enhancing its versatility and performance across various projects. . Specification Main Parameter Information: Capacity:120m�³/h Dredging Depth:3-5m Discharge Distance:180m Main Engine:100KW Operation System:Electric control Selection Materials:Iron IronSelection Rate:95%
Experience the ultimate in cooling efficiency with WELLSUNFAN AC Cooling Fans. Engineered for superior performance, the AC cooling fans deliver powerful airflow while maintaining whisper-quiet operation. Perfect for both home and industrial applications, WELLSUNFAN AC Cooling Fans are designed to keep the environment cool and comfortable, even under the most demanding conditions. With energy-saving technology and durable construction, our AC cooling fans offer long-lasting reliability you can count on. Choose WELLSUNFAN for innovative cooling solutions that blend performance, efficiency, and peace of mind. Stay cool, stay efficient with WELLSUNFAN. The input AC voltages include: 100V, 110V, 115V, 120V, 220V, 230V, 240V, 380V. Types of AC Cooling Fan China for Sale AC08025 Cooling Fan AC08038 Cooling Fan AC09225 Cooling Fan AC09238 Cooling Fan AC12025 Cooling Fan AC12038 Cooling Fan AC13538 Cooling Fan AC15050 Cooling Fan AC17251 Cooling Fan AC20060 Cooling Fan AC Cooling Fan Working Principle AC Cooling Fans work based on the principle of electromagnetic induction by inputting alternating current to generate a rotating magnetic field that drives the motor to rotate, which in turn drives the fan blades to rotate, generating airflow to help dissipate heat from the equipment. This type of motor usually adopts the axial flow design with large air volume and air pressure, which can effectively discharge hot air out of the equipment and reduce the operating temperature of the equipment. Advantages of AC Cooling Fans Simple structure: AC cooling fans have a simple structure, so they are relatively cheaper and easy to maintain. Wide range of applications: AC cooling fans can usually provide higher power and can be used in occasions that require greater cooling capacity. The AC cooling fans can also work under a variety of power supply conditions, so they are widely used in homes and industrial environments. AC Cooling Fans have a long service life and stable performance, and are relatively quiet and will do not produce too much noise interference, making them suitable for use in environments that require quietness. As an ac cooler fan factory, we can provide kinds of related products for sale, and the ac cooling fan price is affordable. If you want to buy ac fan, please contact us.
Narrow Aisle Reach Forklift CQDH15C (double scissors) Detailed Specifications Model CQDH15C (double scissors) Drive type battery battery Load capacity/Rated load Q(kg) 1000 1000 Load centre distance c(mm) 500 500 Load distance, centre of drive axle fork x(mm) 159 135 Tyre size, front mm 28082+16060 28082+16060 Tyre size, rear mm 12582(4) 125�?82(4) Wheels, number front rear(x=driven wheels) 1+2 1+2 Tilt of mast/fork carriage forward/backward) Grad 2/5 2/5 Height, mast lowered h1(mm) 2375 2125 2625 2675 2345 2185 2505 Free lift h2(mm) ~ ~ ~ 2000 1700 1575 1825 Max. lift height h3(mm) 3500 3000 4000 4500 5000 5500 6000 Height, mast extended h4(mm) 4535 4035 5035 7035 6035 5535 6535 Height of overhead guard h6(mm) 2246 2246 Overall width b1/b2(mm) 1308 /1040 1370/1040 1308/1040 Overall length l1(mm) 2585 2609 Length to face of forks l2(mm) 1515 1539 Fork Dimension s/e/l(mm) 35/100/1070 35/100/1070 Reach distance l4(mm) 1200 1200 Fork height, lowered h8(mm) 130 130 Distance of â??Xâ??(see below diagram) mm 350 350 Overall length (excluding the fork) mm 1868 1868 Ground clearance, centre of wheelbase m2(mm) 65 65 Aisle width for pallets 1000�?1200 crossways Ast(mm) 2951 2971 Aisle width for pallets 800�?1200 lengthways Ast(mm) 3034 3056 Turning radius Wa(mm) 1718 1718 Travel speed, laden/unladen Km/h 6.5/7 6.5/7 Lift speed, laden/unladen m/s 0.135/0.16 0.135/0.16 Lowering speed, laden/unladen m/s 0.15/0.12 0.15/0.12 Battery voltage, nominal capacity K5 V/Ah 24/420(560) 24/420(560) Battery weight kg 450 450 Battery dimension l/w/h mm 770x336X610 770x336X610 Service weight (with battery) kg 2530 2480 2590 3030 2830 2730 2930 Now the price of pallet stacker forklift is reasonable, if you have needs, please contact us.
Precision CNC milling parts Completed by CNC milling and forming grinding Accuracy of our custom cnc machining milling parts can be achieved within �±0.002mm. Main products: all kinds of precision parts, connectors, fixture, standard parts, mold design, development and manufacturing. Business projects: precision molding grinding, precision EDM, CNC wire cutting, precision milling machining. Independently research and develop and design automation production machine, to solve the human bottleneck problem and production obstacles for clients. Customized customer demand, research and develop automated production in accordance with the customer production planning. Automated assembly production, share client capacity, OEM production to finish customer delivery. We cooperated with the businesses from different countries and regions Japan ABLE, Belgian Accuritas, Taiwan Cheng Wei Precision Industry Co., Ltd., Cheng Ming Electronic Science and Technology Co., Ltd. (Dongguan) Our company wants to establish long-term cooperative relationship with the following types of foreign enterprises: Electronics, automotive, electrical machine, electrical equipment, instrumentation, home appliances, communications and other industries. The column and base support the remaining parts of a milling machine, and the spindle is lubricated by an oil reservoir and pump in the column. The base supports the column and includes a coolant reservoir and a pump for coolant delivery during machining operations. Knee The gearing mechanism is housed inside a knee. Dovetail ways connect the knee to the column. A vertical positioning screw, often known as an elevating screw, supports and adjusts it. The elevating screw moves the knee up and down by raising or lowering the lever using a hand or power feed. Saddle and Swivel Table The table is supported by the saddle, which is on the knee. In horizontal milling m/c, the saddle slides on a horizontal dovetail on the knee, and the dovetail is parallel to the spindleâ??s axis. The saddle swiveled (revolved) horizontally in both directions, and the swivel table was attached to it. Spindle A milling machineâ??s cutting tools are held and driven by the spindle. It is supported by the column and is positioned on bearings. An electric motor drives the spindle using gear trains located on the column. The spindle face, close to the table, is machined with an internal taper. The front face has two keys that give a positive drive for the cutter holder or arbor.
RB 1530-H water jet plasma CNC cutting machine is high performance heavy duty metal plasma cutting machine, especially suitable for cutting stainless steel and carbon steel with clean cutting edge quality. It adopts servo motor and driving device, and is equipped with water mist jet cutting torch which uses a professional braided tube to wrap the torch cable to prevent the high frequency in the torch cable from interfering with external equipment. Specifications of RB 1530-H water jet plasma CNC cutting machine: 1. FANGLING controller. This cutting machine numerical control system is suitable for all kinds of flame/plasma. high-pressure water jet. laser cutting machines. and is widely used in metal processing. advertising. stone and other industries. The system has a highly reliable design and has the ability to resist plasma interference. lightning strikes. Practical flame/plasma cutting process. during plasma processing. the corner speed control and height controller control are automatically completed; remote operation can be achieved with a wireless remote control. 2. High performance plasma cutting machine power supply. Torch cooling system built inside, which is with high-lift pump and high power radiator to reduce the consumption of torch consumables. Excellent HF arc striking control technology and separate structure of HF controller & power source, which highly reduces HF interference. Gas control separate from the power source: shorter gas circuit, more stable gas pressure with good cutting quality. 3.Plasma torch. REBOUND fine cutting torch Strong perforation ability, good cutting perpendicularity, smooth cut surface. For cutting processes with different currents and metal materials, consumables with good cutting quality are matched. 4. Servo driving system. 5. Automatic Arc Voltage Height Regulator The automatic height adjustment system of the torch controlled by closed-loop PWM is used to keep the height of the plasma CNC cutting machine torch to the steel plate constant during the plasma cutting process. Control the height of the cutting torch during the cutting process by detecting changes in the arc voltage. Ensure cutting quality and work efficiency.
This light gantry CNC plasma cutting machine doesn't have working table, so it can withstand heavy cutting of iron sheet. When we ship this machine, we can dismantle the whole machine, the packing size is only 4 cbm. So this can save a lot of transportation costs. It can be equipped with any plasma power supply, such as China Huayuan, American Hypertherm and so on. Applicable Materials: Sheet and tube of carbon steel, stainless steel, aluminum, copper and other non-ferrous metal . Features of light gantry CNC plasma cutting machine: 1. Two cutting modes optional: plasma plate cutting and tube cutting. 2. Gantry structure, perfect bearing capability. The machinesâ?? body is strong, rigid, high precision, reliable and durable. 3. Adopt well known plasma power USA Hypertherm supply and cutting torch. 4. Cutting edge is small and smooth ,without any drop outs, thickness for metal cutting is up to 30mm. 5. With Arc voltage Auto Height-adjusting Device, arcing success rate over 99% and can protect cutting torch from damage, increase cutting quality. 6. Adopts Imported high-precision Hiwin Linear guide rails, smooth movement, to ensure that the machine tools high-precision. 7. Drive gear and rack ,customized from professional manufacturer, is surface processed by cemented quenching, which can prolong machineâ??s using life. 8. Step and Servo drive system is available, which with features of function detecting ,high running precision, wide speed range and short speed up time. Parameters of light gantry CNC plasma cutting machine: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Working Size 1500mm*3000mm Max Cutting Speed 20000mm/min Cutting Thickness(Plasma)(mm) 1-30mm Power 45A/65A/85A/105A/125A/200A Precision �±0.01mm File output mode USB interface Command Code G code/*.MMG/*.PLT/*.eng Packing type Standard plywood case Table Saw tooth table(Optional Blade table) Weight 1500KG
Xiongcai E3 Motor Speed Controller Integrates High-performance and Safety To Promote Handling Experience of RC Car When you drive your RC cars, what comes to mind must be power, speed or something else rather than protective measures. Maybe the RC car manufacturers might think about this, but we care about it. We have been engaging in motor speed controller since 2011, what we focused on is driving motor more efficiently, more reliably and more safely. When we engineered E3-a powerful motor speed controller, we kept this thought in mind. E3 motor speed controller was engineered according to a clientâ??s concept. This client is one of the largest RC hobby products suppliers, running RC cars, boats, planes etc. they wanted to designed a powerful BLDC brushless motor speed controller for 1:6th scale vehicle. The client said according to their experience, many enthusiasts would have a problem that the high power would damage motor or motor speed controller. We needed to balance high performance and safe. This was exactly what we were good at. Engineered from the ground up, a potent integration of hardware and unique software that will redefine handling experience of RC cars. With power system 400A continuous current, 800A peak, 6-12S Li-po batteries, the ESC will put your RC car in its extreme. A built-in DCDC conversion circuit provides potent loading capacity for BEC with options 6.0V, 7.4V, 8.4V and output 10A continuous current, 25A peak. You can choose proper power according to your servo performance. The Al forged case integrates a 40mm fin and heatsink allows airflow throughout the package, promoting thermal performance to a new level. Fan will be turned on or off by motor speed controller according to internal temperature of system. We have designed perfect protection measures while endowing E3 motor speed controller with high performance, including under voltage, throttle loss, abnormal braking, over temperature, abnormal Hall sensing, short circuit and more, especially the active freewheeling and wave-by wave current limiting. The unique application of active freewheeling identification technology provides microsecond track and response time, minimizing MOS heating. Wave-by wave current limiting will protect motor and transmission mechanism, prolonging service life of power system. Xiongcai E3 motor speed controller is an efficient system designed for enthusiasts RC cars, putting them in extreme and running at their best.
enviClone Photovoltaic PV Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine The PV modules Dynamic Mechanical Load (DML) Test Machine simulates the dynamic load with the pneumatic cylinders and suction cups. Each pneumatic cylinder drives one suction cup, and each cylinder rod is equipped with one tension pressure sensor. Each pneumatic cylinder is a separate control module. Periodic load stress test is performed on the Photovoltaic (PV) Modulesâ?? surface, and PV Modules can be installed according to different requirements. The system also has the ability to monitor the curvature of the PV Moduleâ??s center points in real time. SPECIFICATION Model No.: EVCL-DML-2200, EVCL-DML-2600 Max Dimensions of Tested PV Module Panel 2200 mm x 1200 mm, 2600mm x 1300mm, etc. Quantity for each test 1 Piece of PV Module Pressure Method Pneumatic Cylinders Quantity of Pneumatic Cylinders: 50 pcs, 98pcs, etc (varies as per your Max dimensions of solar panel) Quantity of Pressure Sensors: Each pcs for each pneumatic cylinder The Max Pressure can be tested: 12,000 Pa The Max Pulling Force can be tested: 7,500 Pa Accuracy Deviation: â?¤3% Deformation Sensor: 1 (or customized as per requirement) Controlling Method: Siemens PLC + HM1 Drive Method: Air Compressed Load Amplitude Test Range (Static) Pressure:� +500~12,000 Pa (Continuous, adjustable) Suction:� -500 ~ -7,200 Pa (Continuous, adjustable)� Note: The test time and pressures can be adjusted during the test every time. Load Amplitude Test Range (Dynamic) Pressure:� -2,500 Pa ~ +2,500 Pa Suction:� -500 Pa ~ -7,200 Pa Frequency:� 3~7 times / min Accuracy Deviation:� â?¤� �±50 Pa. Test Standards IEC TS 62782 Photovoltaic (PV) modules â?? Cyclic (dynamic) mechanical load testing IEC 61215 Ed.3 Static: Forward Direction 2400 Pa�·1 IEC 61730 MST 34 Equivalent: IEC TS 60904-12, IEC TS 61836, ISO/IEC 17025, etc. Wuxi EnviClone Test Equipment Company specializes in environmental simulation test chambers for various industries such as automotives, photovoltaic (PV) modules, solar power, new energy batteries, rubber manufacturing, electronics, military, etc.
Coating Thickness Gauge TX Coating Thickness Gauge products have been available for 30 years and are currently available in ED300 and ED400 models, which comply with ISO 2360. The digital coating thickness gauge is used to measure the thickness of the insulating coating on non-ferrous metals. The Eddy current coating thickness gauge is suitable for quick non-destructive coating thickness inspection for production, sale and engineering. The digital coating thickness gauge is used for production inspection, acceptation inspection and quality supervision. Types of Coating Thickness Gauge Coating Thickness Gauge ED400 Coating Thickness Gauge ED300 What Is Coating Thickness Gauge First This Eddy current coating thickness gauge adopts the principle of eddy current. When the probe is in contact with the sample, the eddy current will be generated, and the electromagnetic field of the eddy current will change the probe parameters, and the thickness of the coating can be obtained by measuring the change of the probe parameters. Second The coating thickness gauge is mainly used to measure the anodic oxide coating on aluminum alloy profiles, aluminum composite panel, and other non-ferrous metals. This portable hardness tester can also be used to measure the thickness of paper and plastic foil. Third Since the beginning of production in 1993, with the growth of China's aluminum processing industry, digital coating thickness gauge is constantly improving. It has three generations. ED400 is the latest generation product. Its quality and test accuracy conform the ISO 2360. As a hardness tester company, we will do our best to meet all the needs of customers.
The hard, fibrous, chemically inert, nontoxic, and biodegradable material known as walnut shell is utilized as a Loss Circulation Material in drilling applications. It is produced by grinding specialized walnut to specific sizes and can be utilized in fluid systems of various densities. In some cases, Walnut Shell (F/M/C) is utilized as a nut lubricant to enhance lubricity and decrease torque and drag.. Maintain consistent viscosity and suspension in your drilling mud using our viscosifiers. These additives are carefully formulated to provide stability, lubrication, and enhanced drilling performance. The use of WALNUT Shell as a material for controlling lost circulation in drilling fluids is a common practice in the oil and gas industry. It is highly effective in mitigating the loss of drilling fluids during the drilling process, which can result in significant cost savings. This material can be used alone in re-circulated fluids, or in combination with other materials such as fibrous and flake materials in pill form, to provide an even greater level of effectiveness in preventing lost circulation. In addition to its loss circulation control properties, WALNUT Shell is also utilized as a lubricant in drilling operations to increase lubricity and reduce torque and drag. This is achieved by applying the shell material to the threads of drill pipe and other tools used in drilling operations. The lubricating properties of WALNUT Shell help to reduce friction and heat buildup during drilling, thereby increasing the efficiency and safety of drilling operations. Overall, WALNUT Shell is a versatile material that has a wide range of applications in the drilling industry. Its unique combination of properties, including its hardness, fibrous nature, chemical inertness, non-toxicity, and biodegradability, make it an attractive choice for use in drilling operations.
Introduction To Sany Excavator Bucket Teeth And Adapters Sany excavator bucket teeth and adapters are crucial components designed to enhance the performance and efficiency of excavators. These parts play a vital role in ensuring effective digging, trenching, and material handling. The bucket teeth, attached to the bucket edge, penetrate the ground and break up materials, while the adapters serve as connectors that hold the teeth securely in place. TYPES OF SANY EXCAVATOR BUCKET TEETH General Purpose Teeth: General-purpose teeth are designed for a wide range of digging and loading applications. They are ideal for handling soft to medium-hard materials and are widely used in construction projects. Rock Teeth: Rock teeth are specifically engineered for tough, abrasive conditions. These teeth have a pointed design that allows for efficient penetration into hard rock and compacted soil, making them perfect for mining and quarrying activities. Heavy-Duty Teeth: Heavy-duty teeth are built to withstand extreme conditions and heavy loads. They are reinforced to offer enhanced durability and longevity, suitable for demanding applications such as demolition and heavy construction. TYPES OF SANY EXCAVATOR BUCKET ADAPTERS Weld-On Adapters Weld-on adapters are permanently attached to the bucket lip through welding. They offer a secure and durable fit, ensuring that the bucket teeth remain in place during intense operations. Bolt-On Adapters Bolt-on adapters are attached to the bucket lip using bolts. This type of adapter allows for easy replacement and maintenance, making it a popular choice for many operators. Pin-On Adapters Pin-on adapters use pins to secure the teeth to the bucket. They provide a reliable connection and are relatively easy to install and replace, suitable for various excavating tasks.
TCI BIT The TCI drill bit has the characteristics of wide adaptability to the stratum and high mechanical drilling speed. As a TCI/MI tricone drill bit manufacturer, SML's products conform to the API standard and the drill bit type conforms to the international IADC (International Association of Drilling Contractors) specifications, the carbide inserts used in TCI drill bits are tungsten carbide (WC) and cobalt (Co) series carbide, which are mainly used in oilfield, gas field, mine, water well, geological exploration, geothermal development, hydrological exploration, engineering piling, etc. The TCI drill bit has the function of impacting, crushing, and shearing to break the rocks of the formation when rotating, so the TCI drill bit can be adapted to various formations of soft, medium, and hard. Different Types Of OEM/ODM TCI Drill Bit For Sale TCI Tricone Bit Double action of impact and shear for rock breaking, both impact of teeth and shear caused by sliding, high rock breaking efficiency. Features Of OEM/ODM TCI Drill Bits For Sale The TCI Drill Bits for sale adopts high-strength and high-toughness carbide teeth, and the optimized design of the number of tooth rows, the number of teeth, the exposed tooth height and the unique alloy tooth shape give full play to the high wear resistance and excellent cutting ability of the insert drill. The shape of the TCI Drill Bits teeth is designed according to the formation conditions. In general,the sharp and long teeth are suitable for soft formations, and the short and blunt teeth are suitable for hard formations.
Product Description Melamine is a chemical compound with a number of uses, including manufacturing laminates, glues, dinnerware, and more. This hard plastic can also be made in a wide range of colors and styles, making it an extremely versatile product that can be used in a variety of settings. It is created by combining melamine resin with strengthening materials, which means it can stand up to the rigors of everyday use.Melamine is a chemical compound with a number of uses, including manufacturing laminates, glues, dinnerware, and more. This hard plastic can also be made in a wide range of colors and styles, making it an extremely versatile product that can be used in a variety of settings. It is created by combining melamine resin with strengthening materials, which means it can stand up to the rigors of everyday use. Application for melamine 99.8% crystal powder 1)Melamine is combined with formaldehyde and other agents to produce melamine resins and used as adhesives in plywood industry. 2)Melamine foam is used as insulation, soundproofing material and in polymeric cleaning products, such as Magic Eraser. 3)Melamine is one of the major components in Pigment Yellow 150, a colorant in inks and plastics. 4)used as superplasticizer for making high-resistance concrete. 5)The use of melamine as fertilizer for crops had been envisaged during the 1950s and 1960s because of its high nitrogen content. 6)Melamine and its salts are used as fire-retardant additives in paints, plastics, and decor paper, impregnation paper. Product name: melamine Grade: premium grade items National standard Test result Appearance White powder Content MIN 99.5% 99.8% Moisture MAX 0.1 0.03 Ash content % MAX 0.03 0.02 PH value 7.5-9.5 8.32 Solubility in formaldehyde : Dissolved in 10 minutes Kaolin turbidity degree MAX 20 15 Color (Pt-Co) degree MAX 20 15
Vertical machining center hard rail Product characteristics Taiqun Vertical Machining Center T-8 has high precision and high rigidity cutting performance: 1. The structure of the whole machine is fixed column type and cross sliding table structure. The fuselage adopts a large stable base, the base is wide, and the structure is strong to ensure the heavy load capacity during processing. 2, X, Y, Z axis with high rigidity rectangular hard rail, good shock absorption, good recutting performance. 3, the main shaft adopts high speed and high precision spindle unit, the front end of the main shaft adopts labyrinth design, and has air curtain protection function to prevent cutting fluid from entering the main shaft bearing; 4. The machine adopts front chip design and is placed inside the machine to save space. The machine tool cutting fluid capacity is large, can quickly remove the cutting heat. 5, equipped with high-performance CNC system, to ensure the stability of machine tool control, and has superior CNC processing functions and auxiliary functions. Application field application area Suitable for small and medium-sized box class, plate class, plate class, valve class, shell class, mold and other complex parts of a variety of small and medium-sized batch processing, widely used in precision parts, precision mold, hardware, auto parts, medical equipment industry. Work piece Machining workpiece