Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:http://www.xinchengcanmaking.com, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:http://www.xinchengcanmaking.com, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
HD 2500 specifications: Ring diameter: 2500 mm Roller size: 600*300mm Center speed: 70r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300mm Total weight: 75ton Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD 1720 specifications: Ring diameter: 1720 mm Roller size: 510*300mm Center speed: 92.5r/min Max feeding size: 30mm Final product size: 80-400mesh Capacity: 5-32t/h Dimension: 12500*12250*10400mm Total weight: 48ton The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
5R4128 specifications: Ring diameter: 1270 mm Roller size: 410*280mm Center speed: 105-115r/min Max feeding size: 25mm Final product size: 80-400mesh Capacity: 2-15t/h Dimension: 10100*9300*8300mm Total weight: 28.5ton The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD1280 specifications: Ring diameter: 1280 mm Roller size: 370*240mm Center speed: 125-150r/min Max feeding size: 20mm Final product size: 80-500mesh Capacity: 1.5-10t/h Dimension: 8500*7500*8200mm Total weight: 19t The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
6205ï¼?d25-D52-B15 Specialized in the development, production and sales of ball bearings and roller bearings. We specialize in wheel bearings, agricultural machinery bearings, mining machinery engineering machinery bearings and so on. At the same time, we are also responsible for machining deep groove ball bearings, which are the most commonly used bearings, with a variety of designs, deformations and sizes, as well as a variety of insert bearing mounting units. Our company is located in Linqing Bearing Industrial Park, Shandong. We have complete manufacturing and testing equipment, fast installation, beautiful appearance, flexible operation, stable performance, low operating costs and other advantages have been recognized by more and more customers. Heat treated bearing parts According to advanced heat treatment processing equipment, we can provide commercial integrated products for automotive quenching and forging quenching. Can also be customized according to customer requirements. Relying on mature material application technology, advanced heat treatment technology, perfect material heat treatment detection and analysis technology, and reliable process control technology. Our company can produce the bearing requirements of bearing, martensite, bainite, carburizing and special heat treatment within 1 meter. The inner ring quality meets the technical requirements.
PURE HIMALAYAN SALT: 100% Authentic Himalayan Rock Salt lamp Night Light Natural Shaped imported from Pakistan, hand mined in the Himalayan mountains. Each salt lamp is a piece of a natural rock formation and is unique in pattern, color, shape and weight.Salt rock provides you Natural pink light for bedroom, loaded with powerful minerals and free from toxins, our Himalayan salt lamp is safe to use in the nursery and with kids. HEALTH BENEFITS: Natural Salt rock Lights Emits negative ions when heated by the bulb, Which improves breathing, negate electro-smog, reduces allergy and asthma symptoms, improve health ability,increase the flow of oxygen to the brain,sleep better & wake refreshed. Creates a welcoming ambience to relieve your stress. Natural Pink Salt lamps Provides you romantic Pink room Lights and warm atmosphere and make you feel peaceful.It does have a profound effect on your health. MULTIFUNCTIONAL: The Himalayan crystal rock lamp with its beautiful amber night lights brings divine harmony to bedroom decorations, Home decor, home Hallway, night lights for adults, stylish decoration lamps for bedrooms & best night lights for bedroom, Lamps for living room, kitchen lighting, night light for kids, office,coffee shop, book store, bar, or yoga space and so on.
Shashvi Remedies honey is extremely tasty, aromatic, and beneficial to health. This is a must honey for your dining table. It is used extensively to enhance immunity to fight diseases. Women use for face glow, enhanced beauty treatments and for reducing weight Pure 100% raw natural bee honey of highest quality. 100% pure raw honey- unpasteurized, unprocessed, and unheated. No added artificial flavor, added sugars, additives or colors. Crystallization does not affect honey quality and you can consume in that state as well Raw honey contains all naturally occurring vitamins A, B-complex, C, D, E, and K, a whole lot of minerals, amino acids and hundreds of live enzymes to give you in-numerous health benefits which no other super-food can provide The antioxidant, anti-inflammatory and antibacterial properties of farm naturelle raw honey help you to build huge immunity, fight cold and cough, digestion issues and seasonal allergies. Raw honey also helps heal cuts, wounds and small burns. Raw honey helps in managing your weight by enhancing your body metabolism Indigenous honey is 100% pure and natural honey.
WM-008 DIY charm beads bracelets Description : Newest arrival charms bracelets and bangles,colors beads 1.Totally handcraft work 2.Exquisite smelting process 3.Colorful beads 4.Unique meaning of fashion,nature and beauty 5.OEM is OK. 6. crystal bracelets Delivery Date: 1. Stock order: within 48 hours after we received the 2. OEM/ODM order: 7-30 days, according to order quantity payment 3w dott mandecorp dott come sales at mandecorp dott come sunny at mandecorp dott come wechatt uomissionglass skypee uomission uomissionglass Payment Terms: 1. Accept payment via T/T, L/C, Credit Card, Paypal, Western Union, Escrow; 2. Stock order: pay all before delivery the goods. 3. OEM/ODM order: 50% payment in advance before we arrange for production and pay balance before deliver goods.
WM-009 New Arrival Fashion Jewelry Newest arrival charms bracelets and bangles,colors beads 1.Totally handcraft work 2.Exquisite smelting process 3.Colorful beads 4.Unique meaning of fashion,nature and beauty 5.OEM is OK. 6. crystal bracelets Delivery Date:   1. Stock order: within 48 hours after we received the  2. OEM/ODM order: 7-30 days, according to order quantity payment 3w dott mandecorp dott come sales at mandecorp dott come sunny at mandecorp dott come Payment Terms: 1. Accept payment via T/T, L/C, Credit Card, Paypal, Western Union, Escrow;   2. Stock order: pay all before delivery the goods. 3. OEM/ODM order: 50% payment in advance before we arrange for production and pay balance before deliver goods.
WM-016 silver glass charm bracelets and bangles Newest arrival charms bracelets and bangles,colors beads 1.Totally handcraft work 2.Exquisite smelting process 3.Colorful beads 4.Unique meaning of fashion,nature and beauty 5.OEM is OK. 6. crystal bracelets Delivery Date: 1. Stock order: within 48 hours after we received the 2. OEM/ODM order: 7-30 days, according to order quantity payment 3.w dott mandecorp dott come sales at mandecorp dott come sunny at mandecorp dott come Payment Terms: 1. Accept payment via T/T, L/C, Credit Card, Paypal, Western Union, Escrow; 2. Stock order: pay all before delivery the goods. 3. OEM/ODM order: 50% payment in advance before we arrange for production and pay balance before deliver goods.
Lighting, we've done our homework and offer you a wide variety of chandeliers and styles. This will certainly simplify your task of finding the right chandelier to express and beautify your current living space. For many of our valued clients, this is an exciting process that often sparks creativity as they review the various ceiling lighting options available to them. It is not uncommon for people to stumble upon a type and style of chandelier that leaves them awestruck and immediately generates artistic ideas and approaches that they had not previously considered. The greatest value to our clients is our own background experience in modern chandelier lighting and the countless results we have seen thanks to the creative diversity of our many clients. We can also help you determine which chandeliers will work best in a given space, especially keeping in mind the dimensions of the area in which they will be installed. Once you know the basic parameters of the chandelier that will best meet your needs, you can really start shopping. Choose the size of modern luxury chandeliers according to the size of the room Perhaps you have a large living room, a medium-sized dining space, a rectangular kitchen and a small breakfast nook, all of which will look beautiful when illuminated by the right modern luxury chandeliers. Obviously, these different sizes and shapes of spaces need to be illuminated by different modern chandeliers. Care and maintenance of modern luxury chandeliers Your high-quality modern luxury chandeliers are like a work of art and should be treated as such. With regular care and maintenance, your chandelier will maintain its fresh look for years to come. By following these simple tips, you will always have a brilliant chandelier that radiates beauty and shines like a one-of-a-kind piece of jewelry: Turn off the lights - before you start, make sure the lights have been off long enough that the bulbs and chandelier are not hot No chemicals - even if you come across a special chandelier cleaning solution, don't use it; some formulas can end up clouding your crystals or making your frames lose their shine White glove treatment - always use a clean pair of white cotton gloves when working with chandeliers so that no fingerprints are left behind Warm water only - If there are stains or stubborn dust patches, remove these individual crystals and wipe with a cotton cloth soaked in warm water, then dry immediately Yes, it really is that simple. Now that you know how modern luxury chandeliers can enhance the value and look of your home, and the huge variety of chandelier types and styles available, it's clear that no matter how you look at it, adding chandeliers to your current living arrangement is a winning proposition for it. Contact us today and we can help you turn your current home into a lighted haven.
ZB7204-6 Description: - High Polished and high strength marine boat yacht Stainless Steel Boat/Yacht Wire Rope D Ring Thimble - Easy to install, durable and corrosion resistant - Multiple applications, such as marine boat, trucks, van, caravan, trailers - Universal fit, suitable for both internal and exterior use - High mirror polished face for sleek appearance and to match today's modern watercraft Specification: - Material: 316 stainless steel - Length: Approx 54.5-65mm - Width: Approx 60-65mm - Inner Diameter of Round Thimble: 34-35mm - Width of Round Thimble:18.5mm - Diameter of D ring: 6-7.6mm - Color: Silver Wudi Zhibo Metals Co., LTD is located in the Wudi town Shandong Province which is beautiful and rich shore of Bohai Sea. Our company possesses the advantaged position on the verge of Qingdao and Tianjin ports. And we have convenient transportation extend in all directions in China, especially to Beijing city. Wudi Zhibo Metals Co., LTD is meanly engaged in the metal products. Our business is a system includes the designing, production, machining and selling. Our products are camlock coupling, rigging hardware, marine hardware, auto accessories ,as well as the machine parts .According to the standards of API ANSI BS DIN JIS, the products are made to pretty , rational construction, superior performance. The material of our products is kinds of stainless steel ,such as 304\316\316L ;aluminum; brass; pp; nylon and carbon steel. The products are used in many area covering the marine transport, petrochemical industry, Pharmaceutical papermaking, food industry ,electricity industry and so on. Our products are exported to America England, France, Canada, Australia, Holland, Japan and Korea, and the domestic market is vast too,which gain many trust and favorable receptions home and abroad. From the established to now, Wudi Zhibo Metals Co., LTD obedience to the idea of "Quality First, Creditable Management " and objective of the "Win-Win", all the staffs are devote to the technological innovation, building enterprise brand ,to meet the needs of the clients. Welcome the friends worldwide to visit our company and make business negotiations.
YT-C type hydraulic storage tank lifting equipment is a set of large hydraulic lifting equipment specially developed by our company for national crude oil reserve project in 1994.As long as the number of hydraulic cylinder and pump station system is increased or decreased, this type of equipment can be applied to the inverted construction of large storage tanks with different volumes ranging from thousands of cubic meters to hundreds of thousands of cubic meters. The control part adopts Siemens PLC modular design concept, simple operation, reliable quality.The hydraulic cylinder can be used for single or multiple lifting height adjustment, and can also be used for centralized control of multiple groups.Through more than ten years of practice summary, we continue to optimize the equipment, improve the production process, so that the product quality and performance greatly improved, the majority of users praise. The overall structure of the equipment 1, The equipment is evenly placed inside the jacked tank. The overall force and lateral force of the equipment are calculated strictly and successfully applied. 2, The structure is rigorous and compact, the output force is adjustable, the jacking speed meets the jacking requirements, and the synchronization accuracy is high. Working principle of the equipment The transfer of force: output force of hydraulic cylinder steel wire rope rising ring (welded with lifting lug) rib plate for transferring force tank wall jacking Jacking control process: 1, Pump station control box (rotating selection button) Centralized control operation box (Figure 1-3) hydraulic jacking pump station (solenoid of valve group) PLC devices centralized control operation box hydraulic jacking pump station integral or partial lifting or lowering of hydraulic cylinder. 2, Pump station control box (rotating selection button) control handle hydraulic cylinder (single or multiple) fine adjustment up and down. Hydraulic Lifting Equipment for Tank Construction
Rotary Kiln is one of the most important equipment among all the mining machineries. It is composed of cylinder, gears, supporting device, sealing for kiln tail, sealing for kiln head and other parts. Rotary Kiln is one of the most important equipment among all the mining machineries. It is composed of cylinder, gears, supporting device, sealing for kiln tail, sealing for kiln head and other parts. Kiln cylinder is a heated revolving part which is welding by high quality carbon steel plate. Cylinder is supported on the supporting device by tyres. And there is machanical or hydraulic pressure catch-wheel on one or several gears in order to control the turning of cylinder. By the gear rings in the middle of cylinder, gears drive the Cylinder to rotating with the speed under technical design requirement. Because of the need of installation or maintenance, the big size rotary kiln has auxiliary gears, which make cylinder rotates at low speed. In order to prevent cold air comes into cylinder and the leaking of gas and dust, the reliable kiln tail and head sealing equipment are installed on the feeding and discharging end. Application: Rotary Kiln is thermal equipment which takes heating treatment to lump, bulk and slurry materials. It can be widely used in different industries such as cement & construction, non-ferrous metals, ferrous metals, refractory materials, industrial chemicals, paper making and etc. Features & Advantages: Supporting Device adopts advanced main shaft structure, automatic temperature measuring device and electrical heating device. Catch-wheel mechanical wheel or hydraulic thrust wheel. Hydraulic thrust wheel is equipped with advanced hydraulic controlling system. Gears single driving or twin driving. Rotating speed is under control of adjustable-speed motor, DC motor, or frequency adjustable-speed motor. Reliable operation, energy-saving and high efficiency. Liners for tyres of cylinder fixed type, adjustable type, or floating type Simple structure, convenient replacement and maintenance without any damage to cylinder Sealing Device variety types are available in accordance to different design of rotary kiln; Such as air cylinder edge sealing, spring edge sealing, graphite block sealing and etc.
