Soft drinks, carbonated drinks, aloe vera juice, coconut water, energy drinks..
Semi coke is made from high grade Jurassic coal as a new type of carbon material. Semi coke produced in China, and main production city in Shaanxi China. Semi coke can instead of metallurgical coke to be used in producing ferroalloys products. Semi-coke is light black, characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus. It is wildly applied to chemical industry, metallurgic industry, and gas- making industry to produce Ferroalloys, ferrosilicon, Ferronickel ,Ferrochrome, FeMn & SiMn, as well as Calcium carbide and, fertilizer, etc. F.C.: 84% min Ash: 8% max Volatile matter: 8% max Sulfur: 0.35% max Moisture: 18% max Semi coke is made from high grade Jurassic coal and as a new type of carbon material. It can be instead of some metallurgical coke when produce ferroalloys products. Using semi coke during steel making, blended the semi coke with met coke, which reduced their cost 20% to 30% than using met coke only. Advantage of semi coke than Met Coke in production of Ferro-alloy smelting as deoxidizer (1). Semi Coke could improve the quality of the ferro alloy significantly (especially low aluminum alloy Al2O3â?¤0.1%). (2). Semi Coke could reduce unit electricity consumption significantly (nearly save more than 1000 KWHR, that means 8-10%) (3). Semi coke could lower the cost of raw material. Although the price of semi coke and coke is similar, but its far cheaper than charcoal and pet-coke (4). Its very simple to replace coke, pet-coke and charcoal with semi coke. Its no need to upgrade your equipment and the operation is easy and process is simple.
C70600 pipe/tube using UNS C70600 copper-nickel alloy is primarily used in seawater service as forged and machined valve and pump components, fittings, and hardware. The alloy UNS b111 c70600 pipe is also used in applications where high corrosion resistance is required, and where chloride stress corrosion cracking prevention measures prevent the use of stainless steel. Just like UNS C71500, copper alloy UNS C70600 tube are seamless c70600 copper nickel Alloy Tubes of standard specifications for Water Desalting Plants. UNS ALLOY C70600 PIPE HIGHLIGHTS The properties of copper-nickel tube alloy C70600 are usually supplied as redrawn tubes in the annealed condition. The combination of strength and good ductility provides excellent formability for ASTM B111 tubes. If you are looking for a reliable ss pipe dealer, don't hesitate to contact us!
ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE HIGHLIGHTS SB111 C44300 material has the following benefits: Durability â?? The structure and chemical composition of an SB111 C44300 make it durable. This kind of ASTM B111 tube can last up to 10 years, depending on where you are using them and the frequency of use. WHAT IS THE DIFFERENCE BETWEEN SB111 C44300 TUBE AND THE SB111 C70600 PIPE? The main difference between the SB111 C44300 tube and astm b111 c70600 lies in the material composition and their specific applications. Here are the key distinctions: SB111 C44300 AND C70600 MATERIAL COMPOSITION: SB111 C44300 Tube: C44300 is a copper alloy pipe known as Admiralty Brass, which primarily consists of copper (Cu) with small amounts of zinc (Zn) and trace elements. It is a non-ferrous alloy with good corrosion resistance and excellent thermal conductivity. SB111 C70600 Pipe: C70600 is a copper-nickel alloy known as 90/10 Copper-Nickel, which contains approximately 90% copper (Cu) and 10% nickel (Ni). It also includes small amounts of other elements such as iron (Fe) and manganese (Mn). This alloy offers high resistance to corrosion, particularly in marine environments, and has good mechanical properties. C44300 and C70600 tubes Applications: SB111 C44300 Tube: C44300 tubes are commonly used in heat exchangers, condensers, and other applications where efficient heat transfer and resistance to corrosion are required, such as heat exchanger pipes. They are suitable for use in both freshwater and seawater environments. SB111 C70600 Pipe: C70600 pipes, due to their excellent corrosion resistance, are widely used in marine applications such as seawater cooling systems, shipbuilding, and offshore installations. They are specifically designed to withstand the harsh conditions of saltwater environments. C44300 and C70600 Mechanical Properties: SB111 C44300 Tube: Admiralty Brass (C44300) has good formability, making it easy to bend and shape during installation. It possesses moderate strength and can handle moderate pressures and temperatures. SB111 C70600 Pipe: 90/10 Copper-Nickel (C70600) has higher strength compared to Admiralty Brass. It exhibits good mechanical properties, including high tensile and yield strength, making it suitable for applications requiring higher pressure and temperature ratings. It is important to consider the specific requirements of the application, including the operating conditions, fluid characteristics, and corrosion resistance needed, when selecting between the SB111 C44300 tube and the SB111 C70600 pipe. Consulting the appropriate specifications and guidelines for the intended use is crucial to ensure the optimal choice of material.
ASTM B338/ ASME SB 338 Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium products. We generally divide ASTM B338/ ASME SB338 Titanium tubes into two types, one is called the seamless titanium tube, and the other is called the welded titanium tube. ASTM 338 TITANIUM ALLOY STEEL TUBE PROVIDED BY YUHONG ASTM B338/ ASME SB338 TItanium Alloy Steel Tube YUHONG GROUP provides the best ASTM B338/ ASME SB338 Titanium Alloy Steel Tube including straight tube, U tube for heat exchanger, boiler, and superheater. GR.1 TItanium Alloy Steel Tube GR.2 TItanium Alloy Steel Tube ASTM B338/ ASME SB338 TITANIUM ALLOY STEEL TUBE FEATURES ASTM B338 / ASME SB338 Titanium Tube Grade 7 UNS R52400 Alloy Steel Seamless Tube Titanium grade 7 is a corrosion-resistant alpha titanium alloy with similar mechanical properties to the commercially pure grades. There are 28 grades of titanium and titanium alloys for tubing purposes, among which Titanium Grade 2, Grade 7, and Grade 12 are most often seen in tubing applications. ASME SB-338 is the standard specification for seamless and welded titanium and titanium alloy tubes or tubing which are intended for surface condensers, evaporators, and heat exchangers. ASME SB-338 has a small palladium addition to improving corrosion resistance, particularly in mineral acids and strong brines. ASTM B338/ASME SB338 TUBING APPLICATIONS Chlorination systems Flue gas scrubbers Outlet ducting and stack liners for power plants, pulp and paper bleach plants, sulfur dioxide scrubbers, and weld overlay of less corrosion resistant metals Acid production and pickling systems Pharmaceutical industries use alloy fittings and tubing to avoid contamination caused by corrosion related failures Cellophane manufacturing Chlorination systems Pesticide production Incineration scrubber systems Chemical process industry in equipment like flue gas scrubbers, chlorination systems, sulfur dioxide scrubbers, pulp and paper bleach plants, pickling systems, and nuclear fuel reprocessing Waste water processing Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings Flue gas desulfurization systems Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping Sour gas wells Pulp and paper production Waste treatment Pharmaceutical and food processing equipment Alkaline Media Inorganic Salt Solutions Organic Chemicals Organic Acids Oxygen Hydrogen Sulfur Dioxide Hydrogen Sulfide Liquid Metals Chlorine Chemicals Hydrochloric Acid Phosphoric Acid Sea Water Sulfuric Acid Nitric Acid Anodizing and Oxidation Treatments If you are looking for a reliable ss pipe factory, don't hesitate to contact us!
ASTM B163 is the Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tubes. This covers outside diameter and average wall, or outside diameter and minimum wall tube. The tube shall be furnished in the alloys and conditions defined by this specification. The ASTM B163/ASME SB163 material shall conform to the composition limits of nickel, copper, molybdenum, iron, manganese, carbon, silicon, chromium, aluminum, titanium, phosphorus, cerium, and zirconium, yttrium, boron, cobalt, columbium, tungsten, and nitrogen specified. Tensile strength, yield strength, elongation, and Rockwell hardness of the material shall conform to the required Mechanical Properties set by this specification. Test methods such as chemical analysis, tension, rounding procedure, Rockwell hardness, grain size, and hardness conversion shall be performed for qualified ASTM B163/ASME SB163 alloy tubes. ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE PROVIDED BY YUHONG ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube The most popular materials under ASTM B163 Standard are: UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825). Incoloy 800/N08800 Nickel Alloy Pipe/Tube Incoloy 800H/N08810 Nickel Alloy Pipe/Tube Incoloy 800HT/N08811 Nickel Alloy Pipe/Tube Incoloy 825/N08825 Nickel Alloy Pipe/Tube Inconel 600/ N06600 Nickel Alloy Pipe/Tube Inconel 601/ N06601 Nickel Alloy Pipe/Tube Monel 400/N04400 Nickel Alloy Pipe/Tube Nickel 200/N02200 Nickel Seamless Pipe/Tube ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE FEATURES Nickel alloys tube under ASTM B163 can meet the High Strength and corrosion resistance in a range of media including sea water, hydrofluoric acid, sulphuric acid, and alkalies. ASTM A163 Coiled Tubing is highly resistant to corrosion in different environments. This tubing enables the speed of the operation to be fast at the same time, it is very safe and easy to run. ASTM B 163 Tubing is used in applications for drilling, logging, fracturing, perforating, and production operations. These tubings have a lower environmental impact. If you are looking for a reliable ss pipe company, don't hesitate to contact us!
Name: Zinc Oxide CAS No.:1314-13-2 MF: ZnO EINECS No.:215-222-5 Appearance: white powder Shelf Life:2 Years Zinc oxide (ZnO), commonly known as zinc white, is an oxide of zinc. Insoluble in water, soluble in acids and strong bases. Zinc oxide is a common chemical additive, widely used in plastics, silicate products, synthetic rubber, lubricating oil, paint coatings, ointment, adhesives, food, batteries, flame retardant and other products in the production. Zinc oxide has large band gap and exciton binding energy, high transparency, excellent luminescence performance at room temperature, and has been used in liquid crystal display, thin film transistor, light emitting diode and other products in the field of semiconductor. In addition, microgranular zinc oxide as a kind of nanomaterial also began to play a role in related fields.
Zinc oxide, an inorganic compound with the chemical formula ZnO, is an oxide of zinc, insoluble in water, ethanol, soluble in acid, ammonium chloride, is a commonly used chemical additive, widely used in the production of plastics, silicate products, synthetic rubber, lubricating oils, paints and coatings, ointments, adhesives, foodstuffs, batteries, flame retardants and other products.
Product Description Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.  Popular Products Our paraffin wax are kunlun brand from Petrochina (Fushun Petrochemical Company and Daqing Petrochemical Company).Mainly Products are fully refined paraffin wax, semi refined paraffin wax and crude paraffin wax with the melting point of 54/56/58/60/62/64.      (1)Fully Refined Paraffin Wax 58/60             (2)Semi Refined Paraffin Wax 58/60             (3)Fully Refined Paraffin Wax 56/58       (4)Fully Refined Paraffin Wax 60/62          (5)Fully Refined Paraffin Wax 64/66                (6)Crude Paraffin Wax 58/60   Product Parameters  Item Value Test method Grade #52 #54 #56 #58 #60 #62 #64 #66 Melting point, °C 52 54 56 58 60 62 64 66 GB/T 2539 54 56 58 60 62 64 66 68 Oil content, %(mass) 0.5 GB/T 3554 Color, Saybolt scale +27 +25 GB/T 3555 Max light stability 4 5 SH/T 0404 Penetration, (25°C),1/10mm 19 17 GB/T 4985 Kinematic viscosity, (100°C),m/s Report GB/T 265 Odor number 1 SH/T 0414 Water soluble acid/base Not detected SH/T 0407 Mechanical impurity & moisture Not detected Visual inspec
Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.
Control cables, inner & outer for 2,3 & 4 wheelers meter chain for meter cables, high carbon steel wire, spring wires, annealed wire, gi wires ( galvanising & electroplating) heat treatment, copper .Transportation, shipping, manufacturers
Molecular Principal Chain: Carbon Chain PolymerColor: YellowRaw Material: 100% HardwoodMaterial: wood Sawdust , Bamboo/White PineProduct Pellets FuelPacking: 15kg/Bag
Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm
Model No. GPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.05/0.2-0.4% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Model No. CPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.5/3% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Semi coke Model No. SC-01 SC-02 Fixed carbon(Min) 84% 84% Ash(Max) 8.0% 8% Volaltie matter(Max) 8.0% 8.0% Sulfur(Max) 0.35% 0.35% Moisture(Max) 18% 3% Size 8-18mm,18-35mm,30-60mm,0-1mm,1-3mm
Metallurgical coke Model No. MC-01 Fixed carbon(Min) 85% Ash(Max) 13.50% Volaltie matter(Max) 1.5% Sulfur(Max) 0.8% Moisture(Max) 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke Model No. FC-01 FC-02 FC-03 Fixed carbon(Min) 90% 88% 86% Ash(Max) 8% 10% 12% Volaltie matter(Max) 1.5% 1.5% 1.5% Sulfur(Max) 0.6% 0.6% 0.6% Moisture(Max) 7% 8% 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke is widely used in iron making because of its special physical and chemical characteristics. It's the main cupola molten iron fuel, foundry coke plays an important role in melting furnace charge and overheat the molten iron, support stock column, maintain good air permeability. Therefore, foundry coke with large size,low reactivity, low porosity, sufficient impact resistance and crushing strength, low ash and sulfur content, it is popular in the international markets.
Wheat bran, rice bran, yellow corn, white corn, frankincense (luban), organic oils, organic coconut oil, organic sesame oil, frankincense soap, wheat straw, corn silage, sodium carbonate(soda ash), potassium chloride (kcl), drilling salt, water treatment salt.