Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Hopper hopper, Silo, Feeder Bin, Product Introduction: Silo Hopper is an equipment used in industrial production to store materials, usually cylindrical or square in shape, made of materials such as metal, fiberglass, plastic, etc. The interior of a silo is generally divided into multiple cells to store materials of different types and specifications. The material bin can be transported to the bin through equipment such as conveyor belts, belt conveyors, and screw conveyors. It can also be unloaded from the vehicle and dumped into the bin through tools such as cranes. Function: 1. Storage of materials: The silo hopper is the main place for storing materials in industrial production, which can store raw materials, intermediate products, and finished products in the warehouse to ensure continuous production. 2. Adjust the flow rate of materials: The materials in the silo hopper can be controlled in the production line by opening and closing the gate, adjusting the material discharge speed, and other methods to meet the needs of production and process. 3. Material protection: The silo hopper can protect materials from external pollution or weathering by covering, sealing, and other methods, ensuring stable material quality. 4. Explosion prevention: For flammable, explosive, toxic and other materials, explosion-proof devices or compressed air can be used to clean pipelines in the silo hopper to prevent accidents. Classification : 1. Classified by purpose: it can be divided into raw material warehouse, transfer warehouse, finished product warehouse, etc. 2. Classified by structure: it can be divided into flat bottom silos, conical bottom silos, funnel bottom silos, etc. 3. Classified by material: it can be divided into metal silos hopper, fiberglass silos hopper, plastic silos hopper, etc. 4. According to the discharge method, it can be divided into multi-layer door opening type, side door opening type, discharge type, etc.
Tractor spare parts, tractor seats, top links, stabilizer chain, levelling box, forklift rims, tubeless rims, heavy vehicle rims, special rims, forklift seat with armrest, forklift seat, railer pin group, tractor top link pin, plow disc group, elbow, tambur, exhaust manifold, clutch bearing, casing, disc plow, lower link pin, rear axle plate, plate, manson, gear shaft, drive unit, belt pulley, pinion, holder, main shaft, hydraulic leveling box, drawbar, rear axle, hydraulic top link, hydraulic levelling box, stabilizer chain kit, water pump, housing, knuckle, exhaust manifolt, front axle left, front axle right.Produce
Where we can cater the vast variety of yarn e.g. Synthetic/man-made, 100% Cotton and Cotton/Polyester blended, Lycra core spun yarns etc. with different shades and best dyes and chemicals to be used as VAT, REACTIVE, DISPERSE & Sulfur. For your information NISHAT yarn range specially 100% Cotton yarn, Fancy Yarn (Slub, Multicount, Slub Lycra), Organic & Fair-trade Cotton yarn, P/C and Lycra Core Spun Yarn in Sea worthy Export Carton & Pallets Packing. Detail is as under, PAKISTANI COTTON YARN (100% COTTON) : Ring Spun yarn from Ne. 6/1 to Ne. 45/1 Carded and Combed (Single and Plied) Compact yarn Ne. 24/1 to 45/1 Combed (single and Plied) Slub Yarn (in Carded and Combed) Uneven Yarn Multicount yarn (in Carded and Combed) Core Spun (from Ne. 7/1 to 40/1 with Different Denier of Lycra 140D, 70D, 40D, and 20D Carded and Combed /Single and Plied) Hammel Twist Core Spun yarn Lycra Core Spun Slub (Carded and Combed / Single and Plied) Lycra Core Spun Multicount (Carded and Combed / Single and Plied) Dual core spun yarn (DUAL FAX), Lycra with T-400 or Polyester filament DYED COTTON YARNS / DYED BAMBOO YARNS: Ring Spun yarn from Ne. 6/1 to Ne. 45/1 Carded and Combed (Single and Plied) Compact yarn Ne. 24/1 to 45/1 Combed (single and Plied) IMPORTED COTTON YARN (100% COTTON) (Australian, US Accala, CIS, GIZA, PIMA etc): Ring Spun yarn from Ne. 20/1to Ne. 120/1 Compact yarn Ne. 20/1 to 140/1 Combed Compact Single and Plied Yarn Core Spun (from Ne. 7/1 to 80/1 with Different Denier of Lycra 140D, 70D, 40D, and 20D Carded and Combed /Single and Plied) Hammel Twist Core Spun Yarn Slub, Multicount, Lycra Slub and Multicount yarn (in Carded and Combed) ORGANIC COTTON & FAIRTRADE COTTON YARN(CERTIFIED) Ring Spun 100% Organic Cotton (Ne. 7/1 to 40/1 Carded and Combed) Compact 100% Organic Cotton (Ne. 16/1 to 50/1 Combed) Organic Blending with different Ration (from Ne. 7/1 to 80/1 Carded and Combed) 100% Organic Core Spun Yarn (from 7/1 to 40/1 with different denier of Lycra) 100% Organic Slub Yarn (from Ne. 6/1 to 36/1 Carded and Combed) 100% Organic Multicount yarn (From Ne. 6/1 to 30/1 Carded and Combed) Dual core spun yarn (DUAL FAX), Lycra with T-400 or Polyester filament POLYESTER/COTTON
Cummins Diesel Engine, Diesel Generator set YC6MK420-D31 60HZ/1500RPM,380/220V,400/230V,415/240V can be adjustable, Open Type, weatherproof type or soundproof type, trailer type and so on. Also have 60HZ/1800RPM,voltage is 220/127V,380/220V,440/254V can be option ATS can be option Controller brand: UK Deepsea, Czech ComAp, Denmark DEIF, Smartgen China Generator Standard Compose: Dongfeng Cummins Engine, model YC6MK420-D31. Meet the environmental temperature 40 water tank radiator, Driving belt cooling fans, with fan safety shield 24 V charging generators Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree Shock absorber Dry air filter, Fuel filter, Oil filter Power output circuit breaker Standard control panel 12 V battery and battery connection cables Battery Charger Exhaust pipe, Bellows, Flange, Muffler set 8 hours base tank
DETAILS Self Contained Radial Tracked Stockpiler with the following features: Up to 600+ Tonnes Per Hour (Depending on Material Density). 23.5m (77) Long Conveyor. 10m (32 9) Stockpile Height. 1487 m3 Conical Stockpile Capacity (2380 Tonnes @ 1.6T/ m3) 9222m3 (12,062yd3) Max Radial Stockpile Capacity (14,755 Tonnes @ 1.6T/ m3) 20.95m (68 8) Stockpile Slew Radius. 1050mm (42) Wide Hydraulically Folding Product Conveyor Belt. Deutz TD 2011 L 04 I Tier 3 or CAT C2.2 CRDI (U.S. EPA Tier4 F, EU Stage IIIB) Engine Hydraulic oil cooler fitted as standard. Variable Operation Heights. Hydraulically Operated Front and Rear Telescopic Legs. 400mm Wide Crawler Tracks. Fast on Site setup Time 15 Minutes. CAPACITY OPERATING RATE 600+ TPH* CAPACITY STOCKPILE HEIGHT 10,000MM (33) CAPACITY STOCKPILE CAPACITY 9222 M3 CAPACITY CONVEYOR WIDTH 1050MM (42) CAPACITY CONVEYOR LENGTH 23,500MM (77)
Product Description Roots vacuum pump is a dry positive displacement pump. They operate on the Roots principle, which is similar to that of rotary vane pumps. These pumps are the ideal solution when fast pumping speeds are required. In the case of contactless, oil-free compression Roots booster pumps, two symmetrical cams rotate in the working chamber. During this process, the rotating blades do not come into contact with each other or the housing. Roots vacuum pumps are often used in pumping stations in combination with oil-lubricated rotary vane pumps to achieve very high volume flows and deep final vacuums. Benyuan's three-lobes roots vacuum pump is an internationally advanced roots blower produced by importing and digesting patents and proprietary technology from the American Hibar company and utilizing the company's advanced manufacturing processes. Features 1. Air cooling. Pressure rises to -50 kpa 2. Small size, lightweight, dual-purpose for both vertical and horizontal use, convenient to replace European and American models 3. High-speed, energy-saving 4. Belt self-tensioning technology, easy to use and maintain 5.Impedance-integrated composite muffler with good noise reduction effect
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at -240 °C (-400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings
A&S Construction Machinery Co., Ltd. supplies all types of drive shafts. All the brands of drive shafts we can provide: CAT drive shafts, KOMATSU drive shafts, JOHN DEERE drive shafts, SANY drive shafts, XCMG drive shafts, VOLVO drive shafts, HITACHI drive shafts, SUMITOMO drive shafts, LIEBHERR drive shafts, DOOSAN drive shafts, CASE drive shafts, BOBCAT drive shafts, KUBOTA drive shafts, YANMAR drive shafts, HYUNDAI drive shafts, DAEWOO drive shafts, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of controllers. All the brands of controllers we can provide: CAT controllers, KOMATSU controllers, JOHN DEERE controllers, SANY controllers, XCMG controllers, VOLVO controllers, HITACHI controllers, SUMITOMO controllers, LIEBHERR controllers, DOOSAN controllers, CASE controllers, BOBCAT controllers, KUBOTA controllers, YANMAR controllers, HYUNDAI controllers, DAEWOO controllers, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of gears. All the brands of gears we can provide: CAT gears, KOMATSU gears, JOHN DEERE gears, SANY gears, XCMG gears, VOLVO gears, HITACHI gears, SUMITOMO gears, LIEBHERR gears, DOOSAN gears, CASE gears, BOBCAT gears, KUBOTA gears, YANMAR gears, HYUNDAI gears, DAEWOO gears, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
Engine Number/Position of Cylinders: Single Cylinder Engine Capacity: 155cc Bore x Stroke: 58.0 mm x 58.7 mm Compression Ratio: 11.6 : 1 Maximum Power: 11.3 kW / 8000 rpm Maximum Torque: 13.9Nm / 6500rpm Starter System: Electric Starter Lubrication System: Wet Engine Oil Capacity: Total â?? 1.00 L ; Regular 0.90 L Fuel System: FI (Fuel Injection) Clutch Type: Dry, Centrifugal Automatic Transmission Type: V-belt Automatic Engine Type: Liquid cooled 4-stroke, SOHC FRAME Front Brake: Disc Rear Tire: 140/70-14M/C 62P Rear Brake: Drum Frame Type: Underbone Front Suspension: Telescopic Rear Suspension: Unit Swing Front Tire: 110/80-14M/C 53P DIMENSION Length x Width x Height: 1980mm x 700mm x 1150mm Wheelbase: 1350mm Ground Clearance: 143mm Seat Height: 790mm Curb Weight: 125 kg (ABS Version), 122 kg (Standard Version) Fuel Tank Capacity: 5.5 liters ELECTRICITY Ignition System: TCI Battery: YTZ7V (ABS Version), NTZ6V (Standard Version) Spark Plug Type: NGK/CPR8EA-9
A&S Construction Machinery Co., Ltd. supplies all types of Compressors. All the brands of Compressors we can provide: CAT Compressors, KOMATSU Compressors, JOHN DEERE Compressors, SANY Compressors, XCMG Compressors, VOLVO Compressors, HITACHI Compressors, SUMITOMO Compressors, LIEBHERR Compressors, DOOSAN Compressors, CASE Compressors, BOBCAT Compressors, KUBOTA Compressors, YANMAR Compressors, HYUNDAI Compressors, DAEWOO Compressors, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
Description OF-710 is a polymeric alkyl phenol disulfide, contains unique sulfur donors in the molecular structure, can vulcanize rubber in heated state, typically used as nitrosamine-free environment-friendly sulfur donating body in the rubber compound formulations, can give excellent mechanical properties, heat aging resistance, excellent dynamic fatigue properties and good operational safety performance.� Application OF-710 contains unique sulfur donors, can vulcanize rubber in heated state, giving non-blooming, high tensile strength, excellent heat resistance and dynamic fatigue properties, used as sulfur donor type vulcanizing agent for NR/SR. For the co-vulcanization of different polar rubber, such as NR, CIIR, IIR and EPDM, it provides excellent performance. Can be used in tires, gaskets, belts, automotive hose, damping products. Because containing alkylphenol groups, it has also excellent tackifying and antioxidant effects. Not producing nitrosamines toxic gas during vulcanization, it is an environmentally friendly additive. Referenced dosage 0.5-5 phr. Package and Storage In paper/plastic combined sack with inner film bag, 25 kg net each. Store indoor, drying and ventilating, shelf-life 18 months.
Description OF-7 is a polymeric alkyl phenol disulfide, contains unique sulfur donors in the molecular structure, can vulcanize rubber in heated state, � typically used as nitrosamine-free environment-friendly sulfur donating body in the rubber compound formulations, can give excellent mechanical properties, heat aging resistance, excellent dynamic fatigue properties and good operational safety performance. Application OF-7� contains unique sulfur donors, can� vulcanize rubber in heated state, giving non-blooming, high tensile strength, excellent heat resistance and dynamic fatigue properties, used� as� sulfur donor type vulcanizing agent� for NR/SR. For the co-vulcanization� of different polar rubber, such as NR, CIIR, IIR and EPDM, it provides excellent performance. Can be used in tires, gaskets, belts, automotive hose, damping products.� Because containing� alkylphenol� groups,� it has� also excellent tackifying and antioxidant effects. Not producing� nitrosamines toxic gas� during vulcanization, it is an environmentally friendly additive. Reference dosage 0.5-5 phr. Package and Storage In paper/plastic combined sack with inner film bag, 25 kg net each. Store indoor, drying and ventilating, shelf-life 18 months.
A&S Construction Machinery Co., Ltd. supplies all types of solenoid coils. All the brands of solenoid coils we can provide: CAT solenoid coils, KOMATSU solenoid coils, JOHN DEERE solenoid coils, SANY solenoid coils, XCMG solenoid coils, VOLVO solenoid coils, HITACHI solenoid coils, SUMITOMO solenoid coils, LIEBHERR solenoid coils, DOOSAN solenoid coils, CASE solenoid coils, BOBCAT solenoid coils, KUBOTA solenoid coils, YANMAR solenoid coils, HYUNDAI solenoid coils, DAEWOO solenoid coils, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
The company produces corrugated steel vertical silo series products, equipped with the most advanced computer-aided process design system and silo structure design technology, by the domestic grain machinery industry senior engineer professional design, using high quality hot galvanized sheet manufacturing, product life up to 30-50 years. The product design fully conforms to the national standard of the People's Republic of China gb50322-2001 "grain steel silo design code", and its performance has reached the domestic advanced level.The company can produce flat bottom and tapered bottom steel vertical silos with diameters of 2 meters to 30 meters and single storage capacity of 3 tons to 15,000 tons.At the same time the production of bucket elevator, scraper conveyor, belt conveyor and other grain storage industry supporting equipment.Products are widely used in grain, oil, feed, starch, sugar, alcohol, glucose, food, seeds, brewing, cement, mining, coal chemical, salt chemical and other industries, become the storage particles, powder materials ideal equipment.
A&S Construction Machinery Co., Ltd. supplies all types of drive shafts. All the brands of drive shafts we can provide: CAT drive shafts, KOMATSU drive shafts, JOHN DEERE drive shafts, SANY drive shafts, XCMG drive shafts, VOLVO drive shafts, HITACHI drive shafts, SUMITOMO drive shafts, LIEBHERR drive shafts, DOOSAN drive shafts, CASE drive shafts, BOBCAT drive shafts, KUBOTA drive shafts, YANMAR drive shafts, HYUNDAI drive shafts, DAEWOO drive shafts, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.