Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries. This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation. Specification Model YD-22III Type Hydraulic Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2580*2150*1950mm Engine 4-Stroke Gasoline engine Power 9.5kw RPM 3600r / m Hydraulic system pressure 5~6MPa Vibrating frequency 66.7Hz Exciting force 22KN Max . insert force 16KN Clamping force 6.5KN*2 Production efficiency 260 sleepers/ hour Weight 1385kg
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Reel Type Trolling Reel Model INT12VI Line Capacity (lb-yds.) 1510/10 1030/12 880/15 Fishing Type Saltwater Fishing Line Retrieve/Crank (in.) 53" Max Drag (lbs.) 15 MPN 1370774 Fish Species All Saltwater Weight (oz.) 31 oz Brand Penn Ball Bearings 5 Color Gold Braid Capacity (yd/lb) 985/40 840/50 700/65 Anti-Reverse Feature Multi-Stop Reel Size 12 Hand Retrieve Right Gear Ratio 6.75:1 Drag Style Lever Drag Number of Pieces 1 Features Aluminum Spool, Anti-Reverse, Near-shore, Off-shore, Single Speed, Stainless steel main and pinion gears, Line Capacity Rings Country/Region of Manufacture United States Material Aluminum, Stainless Steel Product Line Penn International VI Department Unisex Pre-Spooled No UPC 031324166981
* The iPhone 15 pro max is brand new. * 100% original and made by Apple. * It comes with a one year Apple warranty. * It comes with its complete accessories inside the box. * It is 100% factory unlocked and it works with any sim cards. * The iPhone comes with a 14 days return money back guarantee. Package Content. 1 Apple iPhone 15 pro max 1TB (with iOS 17). USBâ??C Charge Cable (1 m). Documentation.( User Manual , One year Apple warranty). We have other brands and models of mobile phones, video games and consoles/ digital cameras/ iPad and tablets/ and other kinds of electronics available for sales and units. Local and worldwide deliveries are available to buyers , instalment payment is accepted.
Product Description YD-22 Hydraulic Rail Tamping Machine The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Model RA 40H Input Voltage (V) AC 415 �± 15% Frequency (HZ) 50 / 60 Rated Input Current (A) 23.4 Power (KVA) 16.8 No-load Voltage (V) 75 Output Current Range (A) 40 - 370 Rated Output Voltage (V) 32 Duty Cycle (%) 60 No-load Loss (W) 80 Efficiency (%) 85 Power Factor 0.93 Insulation Grade F Housing Protection Grade IP 23 Net Weight (Kg) 18 Inverter Technology IGBT FEATURES New Design, smart appearance Compact size, lightweight & power saving Strong current output, superior arc performance quality weld with precise control Minimal spatter
Product Description YD-22 Hydraulic Rail Tamping Machine The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Model NO. YLB-700 Material Hydraulic Double-Head Bolt Wrench Weight (Kg) 90kg Jaw Capacity 1in Max Torque Capacity 30lb-in Usage Hydraulic Double-Head Bolt Wrench Transport Package PE Foam+Paper Carton Slope Measuring Instrument Specification 900 x 500 x 1025 mm Trademark Linkage Origin China HS Code 9017800000 Production Capacity 50000PCS/Year Product Description Product Description YLB-700 hydraulic double head rail bolt wrench is applicable to the loosening and fastening operation of sleeper bolts and nuts on railway lines. Using the imported Hon-da gasoline engine as the driving force and using the hydraulic system for driving and precise control, it is a very suitable construction maintenance machine for the new and old railway line, especially the high-speed railway line.
Product Description Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-20 Type Versine Measuring Device Material Aluminum Dimensions (L x W x H) (mm) 100*20*50mm Measure range 20M Weight 157G
Product Description Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-50 Type Versine Measuring Device Material Plastic Dimensions (L x W x H) (mm) 133*66*26mm Measuring Range 50m Weight 210kg
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Model: ZSH-50 Type: Versine Measuring Device Material: Plastic Dimensions (L x W x H): 133*66*26mm Measuring Range: 50m Weight: 210kg
Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model: ZSH-20 Type: Versine Measuring Device Material: Aluminum Dimensions (L x W x H): 100*20*50mm Measure range: 20M Weight: 157G
THE MOST LONG-THROW TACTICAL FLASHLIGHT FROM ARMYTEK NOW WITH MAGNETIC CHARGER Predator Pro is a tactical model with narrow beam of impressive throw for specialized tasks and hunting. The new generation flashlight has retained the best characteristics of the previous version, while receiving a high-tech update. Clear central spot with minimal side spill allows to illuminate objects at a distance up to 501 meters. Ideal for use at a distance of 100-300 meters. The flashlight is supplied with a fast magnetic charger and a 18650 Li-Ion 3500 mAh battery. It can be used right out of the box and charged from any USB power source: a wall or car adapter, as well as a Powerbank. Silicone grip, noiseless tail tactical button, compatibility with any weapon mounts, original remote switches and color filters: well thought-out design guarantees the most efficient tactical application.
LEGENDARY MULTI FLASHLIGHT IS NOW EVEN BRIGHTER, MORE RELIABLE AND CONVENIENT Wizard C2 Pro the first multi flashlight in the new Armytek lineup. Perfect solution for those who are looking for a multifunctional flashlight for continuous professional and everyday use. The model is characterized by incredible brightness and maximum beam distance in the multi flashlight lineup. Charges from any USB power source using magnetic USB cable. Powerful magnet in the tailcap allows fixing the flashlight to any metal surface. The set includes comfortable headmount, clip for attaching to clothes or a backpack, and durable nylon holster. Wizard C2 Pro is compatible with bicycle mount ABM-01 and AHM series helmet mounts for industrial works and mountaineering.
China Mill Cuicuit Discharge Duty Slutty Pump AJ-650MCR AOJIN mill circuit pumps, the Model 650MM, easily manages large size particles in highly abrasive slurries and is specifically designed for the most severe slurry applications such as ball and mill cyclone feed plus water-flush crushing in mineral processing plants. Material is of high chrome iron metal with thick elastomer liners or metal wet end parts, with a long wear life in highly abrasive and corrosive slurries. Impressive features include: new wear resistant material technology. large size and high efficiency impeller. Large and open internal passages designed to reduce internal velocities, to maximize wear life and lower operating costs. Quick wet end exchange minimizes downtime Faster delivery Door to door and on-site service We have global branches for faster delivery. Max Head: 55 m Flow rate: 15,000 m3/hr
STEERING WORM SHAFT Model No.231,233,335,360,531,2000,2310, 2600, 3000, 3600R,3600V, 3900,4000S, 4100,4600SU OEM Part No. D2NN3A710B / C5NN3A710C / 81803231 / 81834394 / 87295836 / A-D2NN3A710B / S.65156 (Length:660MM) We are specialized in Tractor Steering Shafts, Steering Worm, Tractor Steering Gear Box Assembly, Tractor Steering Wheels, Tractor Gears,Tractor PTO Hub,Tractor PTO Drive Pinions, Tractor Counter Shaft, etc.for use in, Agriculture & other Aftermarket Application. Our Products are marketed across to world over USA,U.K., Europe, Latin America, Australia, Middle East, Far East, African & Asian Continent and our Customers base includes OEMâ??S large rebuilders in Organized Sector and Distribution Houses. Deals: Massey, Ford, Fordson, Fiat, Kubota, Deutz, Yanmar, New Holland, John Deere, Case IH, IMT, UTB, Ursus, Sawraj, Perkins, Escort, JCB, Mahindra, Steyr.
Description: Silicon-barium-calcium alloy is a kind of iron alloy material in the steelmaking industry. lts main components aresilicon, barium and calcium. Function: 1. Silicon-barium-calcium alloy is a good new type of deoxidizer in steelmaking, and has good desulfurizationand phosphorus capabilities. Moreover, it plays a very important role in smelting steel types with low sulfur andphosphorus content. 2. Barium effectively reduces the vapor pressureof calcium in the steelmaking temperature range and increasesthe solubility of calcium in molten steel. Barium can effectively protect calcium and reduce calcium oxidation inmolten steel to achieve the purpose of processing molten steel calcium. Place of Origin Henan, China Brand Name GUOHAN Model Number SiBaCa Shape Lump Material Silicon/Barium/Calcium/aluminum Chemical Composition Si/Ba/Ca/Al Packaging Details 1Metric Ton/Big Bag or As customers' Requirement
Condition: brand new - manufactured date: Sep, 2016 (Negotiable) LH Series 118-177kW (116-240HP) Tough, reliable, compact and with outstanding power-to-weight benefits, these four-cylinder direct injection Yanmars in the LH Series include sterndrive models. The turbocharger has a wastegate boost compensator to improve acceleration still further. LH Series 4LHAM-HTP (160HP/118kW) Turbocharged, direct injection four-cylinder diesel power with outstanding power to weight ratio. Supplied as bob-tail unit so that you can choose your transmission type. Standard Package Include: Sensor for various panels Exhaust/water mixing elbow [L-type Cooling water hoses Alternator 12V - 80A Choice Of Transmissions: KMH50A or ZF63A
