Product Details: Available Core Cross-Section Range: 0.1 - 2.5 mm2 Conduit Diameter: 6mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~35mm, End 0~50mm Twisting Way: Both sides or one side Twisting Length: 1 ~ 99mm Max. Middle Stripping Section: 3 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 4000~10000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 220W
Feature: Available Core Cross-Section Range: 0.1 - 6.0mm2 Max. Conduit Diameter: 10.0mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~30mm, End 0~15mm Max. Middle Stripping Section: 13 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220W
Product Details: Available Core Cross-Section Range: 0.1 2.5mm2 Conduit Diameter: �¦10mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~50mm, End 0~35mm Max. Middle Stripping Section: 11 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220W
The compression springs are an open coiled type, used where a load or force is required when compressed, or to store energy in the compressed position. A compression spring offers resistance to compressive forces. The rings are wound around, and both ends can be open or closed or flattened or flatten due to the pressure. The shape of the waist and even the various tails can be deformed by design. It is one of the most widely used of all kinds of springs. Typical applications for compression springs include: Aerospace Valve Spray Off-road equipment Automotive Switches Fluid/air control
Product Details: Available Core Cross-Section Range:30 - 150mm2 Conduit Diameter: 10mm-35mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~300mm, End 0~250mm Cutting Tolerance: ±(0.001 L) (L=Cutting Length) Speed: 400~700pcs/hour Display Way: English LCD dispaly Drive Mode: 32 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 2000W Machine weight: 200kg Size: 1120x600x950mm
Product Details: Available Core Cross-Section Range: 0.1 - 10mm2 Conduit Diameter: �¦13mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~50mm, End 0~50mm Max. Middle Stripping Section: 11 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 500W
DTech Products offers PTFE / PFA / PVDF / FEP lined double window sight glass/sight flow indicator. All products are fully lined with either PTFE, FEP, PFA depending on application. MS / SS 304 / SS 316 is also available. Both the glasses are bolted with the body. Fluids can be viewed from either top or bottom side. Our sight glass has Pressure resistance, Sturdy built, corrosion resistance, Durable. We do manufacturing, exporting and Supplying PFA / PVDF / FEP Lined Double Window Type Sight Glass in various grade of Teflon lining to suit temperature application in Flanged End Connection.
provide process chemicals applied to Wet etching, PR Strips, Cleaning, Dissolutions, and Depositions, and others. The applications are Semiconductor, MEMS, Flat Panel Display, LCD, PCB, and 2nd Battery cell Etc. The origin of Products are from Korea. This chemicals produce under Highest Clean Environments. Please contact me for consultations and a quotations. Specific items are application to Etchant, PR Strip, Cleaning, Solvent, TEOS, NMP Quality has been proved by prominent clients which are producing high end Silicon Chip makers. name of chemicals are HF, BOE, H3PO4, HNP3, NH4OH,NaOH, HCL, KOH, TEOS, Developer, and Mixing chemicals by customized application.
You will love Caret's Antioxidant rich Vitamin C, E, and Aloe Vera infused, a lightweight Daily Radiance day and night cream which gets easily absorbed into the skin to boost it's natural beauty and restore the appearance of time damaged skin. It helps to break up melanin deposits to brighten and lighten the overall complexion. It also rejuvenates the skin, making it appear more youthful and moisturized while reducing the signs of aging such as uneven skin tone, discoloration and fine lines by promoting the skin collagen health. This doesn't end here! It contains SPF 15 which makes it an ideal cream which nourishes, illuminates and protects your skin from the sun's rays all day long.
Extracting Forceps American Pattern Manufacturers In Sialkot, Pakistan. Extracting Forceps American Pattern are used in veterinary dental procedures to extract molars, premolars, roots, canines, wisdom teeth, incisors, etc. without hurting the encompassing structure. They have differently shaped jaws that are strong and grip these teeth firmly Extraction Forceps Molars are specially crafted for easy extraction procedures in veterinary dental surgeries. These forceps have an English pattern and are designed so that the fulcrum is relatively closer to the working end of forceps. Tooth Extracting Forceps Wisdom is designed with an ergonomic handle that provides a balanced grip while surgery. These forceps are crafted from surgical-grade stainless and are available in multiple variations.
Este Lauder's Advanced Night Repair Eye Cream has the following features: Repairs signs of damage to the skin around the eyes. The silky texture focuses on reducing the ageing of the eye area. Fights dark circles, uneven skin tone, fine lines, dryness and puffiness. How to use Use daily morning and evening. Use the bulbous at the end of the stick to apply an appropriate amount, then tap three small taps onto the cleansed eye area, then gently massage the eye area with your ring finger. Clean the stick after each use.
Needle thread tension for sewing parallel and bar tacking sections of buttonholes can be separately controlled through the operation panel and stored in memory according to various sewing conditions (e.g., type of thread, type of material, and sewing speed). The machine is able to change the needle thread tensions at the parallel and bar tacking sections of the buttonhole. to produce a beautiful buttonhole shape. This capability helps greatly in preventing thread breakage. Needle thread tension is activated at the beginning and end of sewing. This prevents unthreading of the needle thread. and thread fraying that is likely to occur at the beginning of sewing. Thread tension for basting stitching can be specified separately.
Logiball Elliptical Mainline test and seal injection packers are custom-made for the exact pipe dimensions and the available access to the storm sewer lines. The two end rubber bladders are covered with a soft rubber sleeve that provides superior seating against rough surfaces. Our elliptical grout packers are equipped with a localized pressure sensor and two injection grouting ports protected by a large, non-clogging adjustable rubber check-valves. Contact us if you need a special configuration. Rentals available, contact our sales department for further information.
Solid Retention Polymer Retention agent is a water-soluble, linear organic polymer. Could enhance the drainage of the wire, improve the retention of small fibers. Advantage: Improve the quality of the paper, such as bonding strength, tensile strength. Save cost by increasing filler retention. Improve whitewater circulation system. Improve paper formation. Improve drainage efficiency. Features: The best retention of fine particles and colloids in the papermaking process normally occurs when the zeta potential is near to zero and retention aid doing that. The main functions of retention aid are following: Improve the quality of the paper, such as bonding strength, tensile strength. Reduced wet-end additives and sizing usage. Improves paper machine runnability
Specifications 1. Diatomaceous  bath door mat 2. Color 3D Print / Customized 3. Pvc Backing 4. Customized Shape 5. MOQ 1 Square Meter if we have stock 6. Lead Time 3 Days after received down payment 7. Packing Woven Bag, Both ends of marks and paper tape inside 8. Payment T/T, L/C 9. Thickness 3.5 5mm 10. Size 40cm*60cm, 50cm*80cm or customized 11. Daily Productionï¼?6000 Square Meters
This led linear lights adopts high-grade aluminum heat sink and anti-UV PC housing. Waterproof rating IP66 led batten light adopt high transmittance(88%) PC diffuser. 210lm/w LED chip as the lighting source of the linear fixture achieve higher lumen out put. This batten light also adopts high efficiency flicker free driver, no glare. LED linear light with knob type end cap and quick wiring terminal block for easy installation. Quantity: >1000 pieces 15.7 USD/piece
PP CaCO3 Filler masterbatch contains mainly CaCO3 Calcium Carbonate powder, resin PP and some additives. CaCO3 made natural mineral calcite with high pure over 99 %, high whiteness > 96 %. This product used to replace one of part virgin resin, from that help save cost for the end product and improved some properties such as: whiteness, hardness, strength. Injection molding is a method of plastic formation including 2 phases: extruding melted plastic and pressing it into mould for fixed forms. Common applications Garden Furniture Office Material Household Electrical Appliances, etc.
Available Core Cross-Section Range: 0.1 2.5mm Conduit Diameter: 10mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~50mm, End 0~35mm Max. Middle Stripping Section: 11 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220
API - S1..S6 SERIES - RODLESS CYLINDERS Rodless cylinders, magnetic as standard. Cylinders with direct power transmission through the tube slot onto the yoke. The new cushionings are adjustable at both ends; the flow rate is regulated from 0 to 100% by turning a pin of an angle of 90°. The new barrel with high resistance to deflection is provided with grooves for fixing various accessories. The magnetic switches can be fixed by a bracket or directly in the tube; the reed switch will not protrude out the barrel profile. The short cylinder type S2, in comparison to the standard cylinder - 0 - stroke, is up to 42% shorter; the total fitting length is therefore reduced and the cylinder is more compact and money-saving.
Rotary Air Blower Product Description The Rotary Air Blower utilizes an involute profile integral shaft ductile iron impeller design. The head plate, gear cover, end caps and rigid one-piece housing are made of gray cast iron. Carburized and ground alloy steel timing gear tapers are mounted on the shaft and secured with locknuts. Cylindrical roller bearings are used on the drive end and ball bearings on the gear end. The characteristics and advantages of rotary blowers 1. Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has high air volume, energy saving, and operates quietly) 2. The operation is smooth and the installation is very convenient (for small models, as long as they are placed properly, the vibration is minimal and there is no need to install anti vibration devices, making the installation very convenient). 3. Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume also changes very little with the pressure change). 4. Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation). 5. The material is excellent, the structure is clever, and the performance is excellent (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, and the performance is excellent, with few faults occurring during long-term use). 6. Simple maintenance, few malfunctions, and long service life (low speed, low wear, and long service life).
