LNG- Liquefied Natural Gas GOST 5542-87, Quantity: 50,000 - 500,000 Metric Tons/Monthly PRICE : $260 Gross - $250 NET /Per MT
Commodity: EN590 Origin: Russia/Rotterdam Delivery: FOB Rotterdam/ FOB Russian Port Trial Qty: 50,000 MT Contract Qty: 12 months + Rolls and Extensions FOB Price: Gross US$265.00 / US$255.00 Net CIF Price: Gross US$275.00 / US$265.00 Net Commission: US$10.00 - 50% SELLER SIDE (CLOSED) 50% BUYER SIDE (OPEN)
Commodity: AVIATION KEROSENE COLONIAL GRADE 54 Origin: Russia/Rotterdam Delivery: FOB Rotterdam/ FOB Russian Port Trial Qty: 2 MM BBLS Contract Qty: 12 months + Rolls and Extensions FOB Price: NWE Platts US$-10 Gross/ US$-8 Net Commission: US$2.00 - 50% SELLER SIDE (CLOSED) 50% BUYER SIDE (OPEN)
RUSSIA ORIGIN DIESEL GAS D2 OIL GOST 305-82 Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 500,000 Metric Tons per Month CIF Price: Gross USD $ 300.00 / USD $ 290.00 NET on CIF
LIQUIDIFIED PETROLEUM GAS. GOST 20448-90% Propane RUSSIAN ORIGIN Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 1,000,000 Metric Tons per Month CIF Price: Gross USD $ 250.00 / USD $ 240.00 NET on CIF
RUSSIA ORIGIN AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL Minimum Quantity: 500,000 Barrels per Month Maximum Quantity: 5,000,000 Barrels per Month CIF Price: Gross USD $ 43.00 / USD $42.00 NET on CIF
Ferro silicon is a ferro silicon alloy made from coke, steel scraps, and quartz (or silica) smelted in an electric furnace. Used as a deoxidizer and alloying agent in the steelmaking industry. Used as an inoculant and spheroidizing agent in the cast iron industry. Adding a certain amount of ferro silicon in the iron casting process can prevent the formation of carbides in the iron and promote the precipitation and spheroidization of graphite. Ferro silicon75( Fesi75) is the main raw material for the production of magnesium, and the consumption per ton is about 1.1 tons. The ground or atomized ferrosilicon powder can be used as a suspended phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
Various models can be customized. High-carbon Silicon is Silicon with a larger carbon content. High-carbon silicon Iron is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide and carburizing agents, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and internal quality of the steel are all uniform. Better than traditional craftsmanship. As a new type of strong composite deoxidizer, it can also be used for the tempering of general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
Silica sand /Quartz sand is processed by crushing quartz grains of quartz, quartz stone is a kind of non-metallic minerals, is a hard, wear-resistant and stable chemical properties of silicate minerals, the main mineral component is SiO2, quartz sand the color is white or colorless, translucent, Mohs hardness of 7, quartz sand is an important industrial mineral raw materials, non-hazardous chemicals, widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemicals, plastics, rubber, abrasive, media and other industries. Sandblasting Grade of Silica Sand Fine Quartz Sand From China Manufacturer Features: Hard, wear-resistant, chemical stability of minerals. Natural Silica Sand. Huge Reserve raw material of Silica sand in China. White granules shape Used in float glass Painting,ceramics and so on. Wide application in many industry. Water filtration Glass manufacture Industrial casting Sand blasting Producing concrete Adding texture to slick roads Silica sand impacts every aspect of daily life. Many industrial suppliers carry silica sand in bulk quantities, while some smaller household stores sell it in smaller amounts for home or home construction use.
Silica sand /Quartz sand is processed by crushing quartz grains of quartz, quartz stone is a kind of non-metallic minerals, is a hard, wear-resistant and stable chemical properties of silicate minerals, the main mineral component is SiO2, quartz sand the color is white or colorless, translucent, Mohs hardness of 7, quartz sand is an important industrial mineral raw materials, non-hazardous chemicals, widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemicals, plastics, rubber, abrasive, media and other industries. Sandblasting Grade of Silica Sand Fine Quartz Sand From China Manufacturer Features: Hard, wear-resistant, chemical stability of minerals. Natural Silica Sand. Huge Reserve raw material of Silica sand in China. White granules shape Used in float glass Painting,ceramics and so on. Wide application in many industry. Water filtration Glass manufacture Industrial casting Sand blasting Producing concrete Adding texture to slick roads Silica sand impacts every aspect of daily life. Many industrial suppliers carry silica sand in bulk quantities, while some smaller household stores sell it in smaller amounts for home or home construction use.
Silica sand /Quartz sand is processed by crushing quartz grains of quartz, quartz stone is a kind of non-metallic minerals, is a hard, wear-resistant and stable chemical properties of silicate minerals, the main mineral component is SiO2, quartz sand the color is white or colorless, translucent, Mohs hardness of 7, quartz sand is an important industrial mineral raw materials, non-hazardous chemicals, widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemicals, plastics, rubber, abrasive, media and other industries. Sandblasting Grade of Silica Sand Fine Quartz Sand From China Manufacturer Features: Hard, wear-resistant, chemical stability of minerals. Natural Silica Sand. Huge Reserve raw material of Silica sand in China. White granules shape Used in float glass Painting,ceramics and so on. Wide application in many industry. Water filtration Glass manufacture Industrial casting Sand blasting Producing concrete Adding texture to slick roads Silica sand impacts every aspect of daily life. Many industrial suppliers carry silica sand in bulk quantities, while some smaller household stores sell it in smaller amounts for home or home construction use.
Microsilica (silica fume) is a byproduct from silicon metal or ferrosilicon industries,is an amorphous silicon dioxide â?? SiO2 which is generated as a gas in submerged electrical arc furnaces during the reduction of very pure quartz. As the molten metal is produced, a silica-based gas is emitted. This gaseous fume, as it rises, cools rapidly and forms extremely minute,Amorphous, spherical particles. The microsilica is collected in a bag house, a system for filtering the hot air and gases vented from the furnace. This gas vapor is condensed in bag house collectors as very fine powder of spherical particles that average 0.1 to 0.3 microns in diameter with a surface area of 17 to 30 m2/g. Microsilica can be used in concrete and refractory materials. Microsilica ,when used in concrete, it can improve concreteâ??s properties such as compressive strength, bond strength and abrasion resistance, reduces permeability,and therefore helps in protecting reinforcing steel from corrosion. At the same time, Microslica can still be used in the procustion of refractory and porcelain, to raise intensity and durability, it also can be used in paint, coating resin rubber and other high molecular as a filler material to improve the material overall performance.
Metallic silicon, also known as crystalline silicon or industrial silicon, is primarily used as an additive to non-ferrous alloys. Â Metallic silicon supplier is the product that is smelted by quartz and coke in electric heating furnace, the content of element of main component silicon is in about 98% (contain Si content 99.99% also contain in metallic silicon), other impurity is iron, aluminium, calcium to wait..According to statistics, in 1985 the world consumed about 500,000 tons of silicon metal, of which about 60% was used for aluminum alloy, less than 30% for organic silicon, about 3% for semiconductor, and the rest for steel smelting and precision ceramics. Use of the silicon matal Silicon is widely used in smelting ferrosilicon alloy as alloying element in steel industry and as reducing agent in many kinds of metal smelting.Silicon is still a good component in aluminum alloys, most of which contain silicon.Metallic silicon is the raw material of ultrapure silicon in electronic industry. The electronic devices made of ultrapure semiconductor monocrystalline silicon have the advantages of small size, light weight, good reliability and long life.Silicon carbide can be used as abrasive, quartz tube made of high purity silicon oxide is an important material for high purity metal smelting and lighting.It has the characteristics of small heat capacity, high mechanical strength, low thermal conductivity, non-combustion, non-toxic and tasteless, cutting, convenient transportation and so on. It can be widely used in metallurgy, electric power, chemical industry, ships and other thermal equipment and pipelines.
Product Description: Micro silica ,also called silica fume or micro silica, is a byproduct of production silicon metal or ferrosilicon alloys. Silicon metal and alloys are produced in electric furnaces.The raw materials are quartz,coal and woodchips.The smoke that results from furnace operation is collected and sold as silica fume, silica fume consists primarily of amorphous(non-crystalline) silicon dioxide(SiO2),its average granule diameter is 0.15~0.20um,specific surface area is 15000~20000m2/kg,and it has extremely strong surface active. Features Characteristics: 1).Appearance is as grey&white off. 2).High electrical resistivity 3).Low Permeability 4).Superior resistance to chemical attack from chlorides,acids and sulfates 5).Low chloride ion diffusion 6).High reactive Pozzolan 7).High temperature strength 8).Improved stability ingeothermal environment Application area: 1) Concrete or Shotcrete • Increase its density and strength, improve the performance on its durability, impact resistance, corrosion resistance, anti-permeability and frost resistance etc 2) Refractory material & Ceramics material • Greatly improve its density, strength and high temperature performance. 3) Cementitous Repair Products (Mortars & Grouts) • Low permeability, increase resistance from chlorides, acids, nitrates and sulfate etc 4) Oil Well Grouting • Increase durability and compressive strength, decrease permeability, better control of gas leakage 5) Concrete Tile, roofing & wallboard,panels • Lightweight and improve the strength 6) Polymers & rubber product 7) other application, such as waterglass industry, thermal insulation material etc.
We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). Copper SCRAP,HMS,Used Rail,Metal,Moto Scrap,Vessel,Tyre Wire Scrap,Aluminium Scrap We are yard owners and end sellers of metals and scrap metals we offer: Copper cathodes and copper scraps Aluminium Ingots and aluminium scraps lead Ingots and scraps HMS 1/2 scrap, Moto scraps Used rails, battery scrap in large quantity. we sell at affordable prices
Black Silicon Carbide Introduction Because of the rarity of natural moissanite, most silicon carbide is synthetic. It is used as an abrasive, and more recently as a semiconductor and diamond simulant of gem quality. The simplest manufacturing process is to combine silica sand and carbon in an Acheson graphite electric resistance furnace at a high temperature, between 1,600 �°C (2,910 �°F) and 2,500 �°C (4,530 �°F). Fine SiO2 particles in plant material (e.g. rice husks) can be converted to SiC by heating in the excess carbon from the organic material. The silica fume, which is a byproduct of producing silicon metal and ferrosilicon alloys, also can be converted to SiC by heating with graphite at 1,500 C (2,730 F).
High carbon silicon briquette 5015 can be used for all kinds of ordinary steels to deoxidize, increase silicon, increase carbon during casting, and quickly deoxidize, with early slag formation, dense reducing atmosphere, and effectively improve the element recovery rate, so that the quality of molten steel is stable. High carbon silicon briquette 5015 can replace ferrosilicon, silicon carbide, recarburizer, reduce the amount of deoxidizer, used in converter smelting deoxidation alloying process, the effect is stable, steel chemical composition, mechanical properties and internal control quality are better than traditional processes. High Carbon Silicon Briquette 5015 is conducive to the reduction of production costs. High Carbon Silicon Briquette 5015 improve the quality of molten steel. High Carbon Silicon Briquette 5015 reduce the amount of alloy added. High Carbon Silicon Briquette 5015 adjusts the main alloy.
Silica fume, also known as condensed silica fume or microsilica, is a spherical sub-micron amorphous silicon dioxide used in many applications. Silica fume is a co-product of silicon or ferrosilicon production, consisting of ultrafine (sub-micron), amorphous, non-porous, perfectly spherical silicon dioxide (SiO2) particles, with purity levels of 85 to 99 %. The main effect of these ultra-fine particles is to greatly improve particle packing and produce a highly pozzolanic reaction in concrete and other cementitious bond systems where the silicon dioxide reacts with calcium hydroxide, heightening performance levels and the strength and durability of these materials. Additionally, silica fume, because of its amorphous (non-crystalline) structure and its specific area, provides other useful features to various applications, including improved sintering capabilities and enhanced high temperature performance of refractory castables, resulting in reactions between microsilica and other components of the refractory mix. To summarize, silica fume has two key features which alone or in combination are the basis for its high performance: The nano-sized spherical non-porous particles create an efficient "filler effect" Primary particles have an average diameter of about 0.15 �¼m (150 nanometers) Microsilica is a highly reactive form of silica producing a "chemical effect" Thanks to its amorphous nature and high specific surface area.
silica is the second most abundant element in the earthâ??s crust. Silicon oxide or silica is a chemical compound that exists in pure or compound form in silicate minerals. This material is used in the industries of glass and ceramics, fillers, electronics, optics and semi-media, lighting and infrared, and optical fibers and computers. It is used in porcelain, concrete, grass, rice paddies, ferrosilicon production, ceramics, lime sand brick production, casting, and sodium silicate production. In general, this material is the main constituent of many ceramics and glass. . This material also has many uses in technical applications. Glass silica: Silica is the main element in all types of glass. The main glass products include utensils such as glass bottles and crystal cups and flat glass such as windows and mirrors and vehicle glass and lighting glass and tableware are used and silica is cast. It is widely used in casting metal parts. Molten metal is poured into molds made of silica sand. Fine-grained silica is also a component of most clay bodies and a major component of ceramic glaze. Everyday products include tableware, sanitary ware, jewelry, and wall and tile. Home Jacuzzis usually use different grades of premium silica. Silica is also used in sports venues, for example for the floors of equestrian clubs, in the production of artificial turf, golf and football fields, and in parks as a playground. In general, this useful substance is used in the production of chemicals and metals, filters in some industries, and in the production of plastics and agricultural products. Consulting Name Email Message
Silica fume, also known as micro silica is an amorphous silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy productionThe main field of application is as pozzolanic material for high performance concrete. Technical Specifications: SiO2 â?? Silica : >90% Color : Grey Application Because of its extreme fineness and high silica content, silica fume is a very effective pozzolanic material. Standard specifications for silica fume used in cementitious mixtures are ASTM C1240,[8] EN 13263.[9] Silica fume is added to cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Addition of silica fume also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges. Effects of silica fume on different properties of fresh and hardened concrete include a) Workability: With the addition of silica fume, the slump loss with time is directly proportional to increase in the silica fume content due to the introduction of large surface area in the concrete mix by its addition. Although the slump decreases, the mix remains highly cohesive. b) Segregation and bleeding: Silica fume reduces bleeding significantly because the free water is consumed in wetting of the large surface area of the silica fume and hence the free water left in the mix for bleeding also decreases. Silica fume also blocks the pores in the fresh concrete so water within the concrete is not allowed to come to the surface. Application Areas: High performance concrete High strength, low permeability concrete Industrial flooring Water tanks and sumps Chemical storage tanks Basements and sewerage pipelines Refractory mixes etc. Petroleum Referineries Tunnels