Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features FBT-01S is an economic version of ball impact tester, without complicate control and system. It also uses electromagnetic suspension and release, and is equipped with two foot switches too. Sample pneumatic clamping is also the same type and test area as FBT-01. Key Features: 1. Adjustable Impact Height and Various Balls cater to diverse testing scenarios. 2. Electromagnetic Suspension: Employing electromagnetic suspension ensures a controlled and consistent release of the impact ball. 3. Reliable Pneumatic Sample Clamping guarantees that test specimens remain firmly in place throughout testing. 4. User-Friendly Operation: The tester is equipped with two foot switches, simplifying the testing process and enhancing usability. Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa �¦8 mm PU Tubing Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
Application The CLRT-01 Carbon Dioxide Volume Tester is a crucial tool in the beverage industry, focusing on gauging carbonation levels, which significantly impact the bubbly and sensory qualities of drinks, thus influencing product excellence and customer contentment. Specially crafted for CO2 volume assessment, the CLRT-01 employs an automated process to uncover the connection between pressure and temperature, a pivotal factor in thorough beverage quality analysis. By seamlessly merging these elements, it offers a profound understanding of carbonation dynamics, granting manufacturers the ability to maintain consistency, adapt formulations, and provide effervescence that resonates with consumer preferences and brand achievement. Automatic Testing and Shaking The tester automates the traditional manual process: Piercing the bottle cap â?? Opening the vent valve to release pressure â?? Closing the vent valve â?? Vigorously vibrating for 40 seconds â?? Recording the stabilized MPa pressure (while measuring liquid temperature) â?? Obtaining the carbon dioxide gas capacity test results. Technical Features 1.This unit is under precise PLC control (at an industrial-grade stability level) and operated through an HMI touch screen interface. 2.Agitating the sample bottle is achieved using a servo motor and gearbox transmission mechanism. 3.The design incorporates anti-leak features and includes accurate temperature and pressure measurement. 4.The process involves automated piercing and shaking. 5.Displacement and speed during piercing are controlled for accuracy. 6.The shaking parameters, including frequency and duration, can be customized. 7.Test results are guaranteed accurate due to the implementation of a highprecision pressuresensor. 8.Real-time temperature display is enabled by a precision temperature sensor. 9.Post-test, the carbonation volume is automatically and presented. 10.Designed to prevent leaks, this versatile tester is suitable for both bottles and cans. 11.(Optional) A microprinter can be incorporated for additional functionality. 12.(Optional) The inclusion of an RS 232 port and professional software provides further versatility. Main Parameters Test Range 0~1MPa Resolution 0.01KPa Shaking Speed Adjustable Piercing Speed 5mm/s (other available) Sample Height â?¤ 350mm (other available) Temp. range 0 ~ 30 Shaking time 40s (other available) Resolution 0.1
Background Impact strength is a crucial parameter for assessing the quality of plastic films. It plays a significant role in determining a film's ability to withstand external forces and impacts, which can directly affect its cost and performance, especially during transportation and handling. The Falling Dart Impact Test is a traditional and widely accepted method for measuring the impact strength of plastic films. This test helps determine the energy required to cause a plastic film to fail under controlled conditions where a free-falling dart strikes the material's surface. The result of this test provides valuable information about the material's ability to resist impact and can help manufacturers and quality control teams make informed decisions about material selection, product design, and packaging to ensure the durability and integrity of plastic films in various applications. Application FDT-01 Falling Dart Impact Tester is used to measure he resistance performance of plastic films, sheets, and composite films, foils, paper, with less than 1mm thickness. This test indicates material ability to resist external force. The FDT-01 Falling Dart Impact Tester is a specialized testing device designed for measuring the resistance performance of various materials, such as plastic films, sheets, composite films, foils, and paper, provided they are less than 1mm thick. This test is conducted to assess the material's ability to withstand external forces. Standards ASTM D1709, ISO 7765-1, JIS K7124-1, GB/T 9639.1 Technical Features FDT-01 Falling Dart Impact Tester is a PLC controlled unit (industrial level stable) and HMI touch screen operated. Every part of the dart assembly and releasing mechanism are made strictly to standard. By the embedded test program, user just needs to perform test and increase or reduce the weights according to the set parameters. Then after enough number of Fail/Non-Fail tests, the system automatically gives impact result, which is without being manually calculated again. 1. PLC Control and Touch Screen Operation offer stability, ease of use and efficient operation. 2. Two Test Methods (A and B) (Method B is optional) 3. Both Test Button and Foot Switch Are Equipped for safe and easy operation 4. Observation Light helps check sample status during clamping 5. Display of Test Results in Grams and Joules 6. Electromagnetic Suspension and Automatic Falling 7. Sample Pneumatic Clamping 8. Dot Matrix Micro-Printer Embedded for data output 9. Professional Software is Provided as an Optional part Main Parameters Test Method Method A or Method B (optional) Test Range Method A: 50~2000g/Method B: 300~2000g Dart Diameter Method A: 38�±1mm/Method B: 50�±1mm Impact Height 660mm/1500mm Accuracy 0.1g (0.1J) Clamp Pneumatic Clamp Gas Supply 0.6 MPa �¦8 mm PU Tubing Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz Dimension Method A: 500*450*1200 mm (LWH)/Method B: 500*450*2200 mm (LWH)
CCD VISUAL POSITIONING LASER MARKING MACHINE Our visual positioning laser marking is based on traditional laser marking machines. This CCD laser marking machine China uses a high-precision CCD camera to capture the current position of the product. It can quickly identify product position, mark multiple products at one time, and can also perform automatic loading on the assembly line and rough positioning. Then perform visual positioning and marking to save labor, improve production efficiency, and save a lot of costs. CCD VISUAL POSITIONING LASER MARKING MACHINE TECHNICAL PARAMETERS Laser power 30W/50W Laser source Fiber laser source Laser wavelength 1064nm Work size 100*100mm-300*300mm(Option) Working voltage 0.5KW/AC220V/50Hz(option) Lifting pillar 500mm(customize) Cooling system Air Cooling Power Range 1%-100% Working environment 0~35°C humidity 90% Minimum character 0.2mm Minimum line width 0.01mm Repeatability accuracy 0.003mm Resolution 0.001mm Marking speed 0-7000mm/s Marking Depth Depends on materials Laser modulation frequency 20kHz~80kHz CCD camera Yes, Industray camera Features of CCD Visual Positioning Laser Marking Machine 01 CCD vision positioning system: Use high-resolution industrial cameras to capture dynamic images in real time, accurately calculate real-time coordinates, and place the pattern in the correct position to avoid deviation. 02 Conveyor belt: The conveyor belt can be loaded and can be easily connected to the assembly line to achieve pipelining marking, ensure stable and efficient operation. 03 Z axis Ruler: Each millimeter scale number is clearly visible, making marking more accurate. 04 Lifting handwheel: The lifting handwheel makes focus adjusting focus more simple and convenient, can meet better the marking needs of different materials.
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQGâ??5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Place of Origin Hubei, China Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Brand Name Linkage Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
PRODUCT DESCRIPTION High Durable Excavator Thumb Bucket Hydraulic Grab Bucket Hydraulic Thumb Bucket Description Also Known as Thumb Bucket, Clamp Bucket, It Mainly Applies for Recycling / Civil Applications. Clamp Bucket Specification Weight kg 180 360 520 840 1430 1860 Max Opening mm 818 1150 1380 1550 2220 2235 Oil Pressure kg/m^2 100-130 110-140 120-160 150-170 160-180 160-180 Operating Oil L/min 25-40 30-55 50-100 90-110 100-140 130-170 Cylinder Volume ton 4 5.4 5.4 8.2 10 12 Suitable Excavator ton 2~3 4~6 7~11 12~16 17~23 24~30 * The Parameter above may change with the technology improvement, will not notice additionally, please understand. * For other diameters and lengths, we can customize service, OEM/ODM Thumb Bucket Features 1. Rotary Type High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 0 2. Fixed Type: High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 1 Clamp Bucket Real Work shot High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 2 Excavator Integrated Thumb Bucket Can be used for disposable waste, shrubs, logs, construction waste, stones, pipes, landscaping materials, and demolition sites.Hydraulic excavator grab disassembly and recovery/civil applications. The thumb bucket has advantages in grasping small pieces of wood, sticks, and strips. Suitable for municipal construction, secondary demolition, mining, and most of the operating environment. Easily handle all types of loose, irregularly shaped objects encountered in demolition, industrial, construction, recycling, storm debris removal, landscaping, and other tough job applications.
Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining this stretched state even after cooling. When the heat shrinkable film is reheated to the temperature at which the initial stress was introduced and subsequently fixed during its production, this stress is released, causing the film to contract or "shrink back." Depending on the specific manufacturing treatment applied, the film can be categorized as either biaxially oriented (stretched in two directions) or uniaxially oriented (stretched in one direction). Test Process 1. A well-insulated air oven is heated to the set temperature. The two samples are placed separately on two test stations, for shrinkage rate and shrink/contraction force testing. 2. A temperature probe is located to measuring area, to give result as reference temp. The air oven is driven down automatically to cover the sample area. The force and shrink rate are to be measured and the shrinkage temperature is reached when the maximum shrinking force is attained. 3. When this force has decreased by around 15%~30%, the air oven is lifted and time is recorded. 4. The assessment of shrinkage ratio is performed at the mean time. Technical Features 1. PLC Control and HMI Touch Screen: ensuring industrial-level stability. 2. Well-Insulated Air Oven: The air oven is excellently insulated and capable of automatic lowering and lifting, enhancing the precision of the testing. 3. Non-Contact Shrink Ratio Measurement: accomplished through a noncontact method, improving accuracy and reliability. 4. Real-Time Display:including shrinking force, contracting force, and shrinkage ratio, allowing for immediate analysis and monitoring. 5. Elimination of Interference Factors: Irrelevant interference factors like friction and cool air are effectively eliminated, ensuring the accuracy of the results. 6. Stable Heating System: The heating system is stable and well-balanced, maintaining consistent and controlled test conditions. 7. Easy Sample Loading: Sample loading is made easy, streamlining the testing process and reducing setup time. 8. High-Resolution Sensors: The system is equipped with high-resolution force transducers and thermometers, guaranteeing precise measurements. 9. Connectivity and Software:(optional) It includes an RS232 port for data connectivity and offers optional professional software for advanced data analysis and reporting capabilities. Standards: ISO 14616, DIN 53369 Main Parameters Force Range 5 N ( or as required) Accuracy ±0.5% Resolution 0.001N Displacement Range 0.1 ~ 95 mm Accuracy ±0.1 mm Temperature Range Ambient ~ 210C Accuracy ±0.5C No. of Specimens 2 Sample size 110*15 mm, L*W Power Supply 220V 50Hz
Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features The FBT-01 Falling Dart Impact Tester is a system with PLC control (maintaining industrial-grade stability) and is operated via an HMI touch screen interface. Key Features: 1. Precision PLC control and user-friendly touch screen interface 2. Adjustable impact height with a variety of available ball options 3. Display of test results in multiple units 4. Utilizes electromagnetic suspension for automatic ball release 5. Secure sample clamping through pneumatic mechanisms 6. Convenient manual and foot switch operation 7. Equipped with a dot matrix micro-printer 8. Option for advanced professional software (available as an add-on) Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa 8 mm PU Pipe Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Hydroxyethyl Cellulose(HEC) CAS NO.:9004-62-0 Hydroxyethyl Cellulose (HEC) is nonionic soluble cellulose ethers, both soluble in hot and cold water. Hydroxyethyl Cellulose is a white free-flowing granular powder, treated from the alkali cellulose and ethylene oxide by etherification, Hydroxyethyl Cellulose has been widely used in paint and coating, oil drilling ,pharma, food, textile, paper-making, PVC and other application fields. It has good thickening, suspending, dispersing, emulsifying, film-forming, water-protecting and providing protective colloid properties. 1.Chemcial Specification Appearance� White to off-white powder Particle size 98% pass 100 mesh� Molar substituting on degree (MS) 1.8~2.5 Residue on ignition (%) â?¤5.0 pH value 5.0~8.0 Moisture (%) â?¤5.0� � � 2.Products Grades Product grade Viscosity (NDJ, 2%) Viscosity (Brookfield,1%) Technical Data Sheet HEC HR300 240-360 240-360 Download HEC HR6000 4800-7200 4800-7200 Download HEC HR30000 24000-36000 1500-2500 Download HEC HR60000 48000-72000 2400-3600 Download HEC HR100000 80000-120000 4000-6000 Download HEC HR150000 120000-180000 6000-7000 Download
Flat Sheet Ceramic Membrane The flat plate membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Our Ceramic flat sheet membrane can offer exceptional efficiency and durability compared with the organic film. Ceramic flat membrane produced by one of professional flat sheet membrane manufacturers in China has the advantages of good chemical stability, good reliability, long service life and strong anti-pollution ability. Advantages of Flat Sheet Ceramic Membrane Long life and no degradation Strong resistance to acid, alkali and to organic solvent; Suitable for all kinds of wastewater containing solvents and chemicals Strong hydrophilic and better anti- pollution property Better Mechanical properties, no broken wires phenomenon of hollow fiber membrane Easy to wash lower cleaning frequency, suitable for all kinds of membrane cleaning methods Low operating cost and energy saving Flat Sheet Ceramic Membrane Specification Length (mm) 500-1100 Width (mm) 110, 150, 250 Thickness (mmï¼? 3, 6 Area (m2) 0.5 Membrane material Al2O3, ZrO2, TiO2 Pore diameter (�¼m) 0.1 Pure water flux (m3/m2.h) 0.5-1.0 pH 0-14 Breaking strength (MPa) 40 Ceramic Flat Sheet Membrane Application Area Membrane Bioreactor (MBR) Industrial wastewater treatment (e.g. paper mill wastewater treatment) Seawater desalination pretreatment Municipal wastewater treatment Domestic sewage treatment Hospital wastewater treatment Landfill leachate treatment Pretreatment of RO system
The LB platform hermetical top discharge centrifuge enables the adjustment of the revolving speed for feeding, cleaning, and solid-liquid separation within a specific range, from 0 to the rated revolving speed.Under the effect of this top discharge centrifuge force, the material is evenly distributed on the drum wall to take off the liquid. Drilling through the gap between the solid phase material and filter net( or a filter bag), the liquid phase is thrown into the empty chamber of the shell through the drum wall hole and then discharged while the solid phase remains in the drum. Since liquid material is fed in the feeding pipeline and the washing water from the washing pipeline, there are special valves to control the feed. LB Properties and Uses Since the L(P)B series top discharge centrifuge has a good adaptability to the materials, it can be used to separate the fine grains of micron size, to dehydrate the large articles, as well as to apart all kinds of suspension that was difficult to separate. The grains are discharged manually and will not be broken at random. This type of industrial centrifuge machine is suitable for industrial materials such as gypsum, ammonium sulphide, bluestone, potassium chloride, borax, dyestuff, resin, pesticide, pharmaceutical materials such as salt, monosodium glutamate, food additive, starch, aluminum, etc, and other industries such as environmental protecting(sullage and sewage processing), etc. centrifuge platform Hermetical Top Discharge Centrifuge 01. The top discharge centrifuge has a novelty structure while it is convenient for operation and maintenance. 02. The top discharge centrifuge adopts whole sealing structure to improve the working condition and meets the requirement of GMP Norm and environmental protection. The facility is filled with Nitrogen to meet the explosion proof demand. 03. Adopted with big cover structure, the top discharge centrifuge is convenient to discharge the material and thoroughly wash the space between the shell and drum. 04. The lid is equipped with a mechanical balancer, so it is less labor cost and needs no energy. 05. The top discharge centrifuge incorporates a frequency conversion system to ensure a stable start-up. Program can be predetermined to ensure a complete automatic process including feeding, filtering, washing and discharging, etc. It adopts dynamic(feedback) braking without friotion powder pollution and friction heat, so it is much safer. 06. Since both the inner and outer surface have been polished, no dead angle exists can be achieved when a CIP cleaning system(material cleaning and machine cleaning) is available. 07. Grains can be well preserved. As a professional industrial centrifuge factory, saideli has high-quality centrifuge separator machine for sale. Welcome to contact us if needed.
Clamping assembly AH080101050400 AH34001-05.04.00 Clamping assembly AH100101051900 AH33001-05.24.00 Piston rod AH0501010512 AH35001-05.18A Piston rod AH0801010502 AH34001-05.02A Piston rod AH1001010516 AH33001-05.21A Cylinder head AH0501010516 AH35001-05.22 Cylinder head AH1001010520 AH33001-05.27 Top cylinder AH0501010506 AH35001-05.06 Top cylinder AH1001010506 AH33001-05.06 Fixed card AH0501010517 AH35001-05.23 Fixed card AH1001010521 AH33001-05.30 Stem guide (bottom) AH050101051800 AH35001-05.24.00 Stem guide (bottom) AH100101052200 AH33001-05.31.00 Suction pipeline AH050101051900 AH35001-05.28.00A Suction pipeline AH080101050500 AH34001-05.06.00A Suction pipeline AH100101052300 AH33001-05.34A.00 Gasket group AH050101052000(2) AH35001-05.31 Gasket group AH080101050700(2) AH34001-05.08.00 Gasket group AH100101052400(4) AH33001-05.37.00 O-ring 230 Ã?? 7 530301012300070000 O-ring 290 7 530301012900070000 O circle 345 7 530301013450070000 Suction flange I AH050101010521 Suction flange I AH0801010508 AH34001-05.10 Suction flange I AH1001010525 AH33001-05.39 Bolt M27X90 42020101072709001 0 Bolt M22X90 420201070622090000 Bolt M22X100 T502-3006 Silk plug Z11 / 2 T506-1007 Suction flange II) AH0501010521 AH35001-05.32 Suction flange II) AH0801010509 AH34001-05.11 Suction flange II) AH1001020509 AH33009-05.03 Suction air bag AH0000050300 AH35001-05.29A.00 Inhalation capsule AH0000050301 AH35001-05.29A.01 Suction end cover AH0000050302 AH35001-05.29B.02 Suction air bag AH080101050600 AH34001-05.07A.00 Inhalation capsule AH080101050601 AH34001-05.07A.02 Suction end cover AH080101050602 AH34001-05.07B.03 Suction air bag AH0000050100 AH33001-05.35A.00 Inhalation capsule AH0000050101 AH33001-05.35A.02 Suction end cover AH0000050102 AH33001-05.35B.03 Bolt M27X85 T502-7026 Bolt M22X90 420201070622090000 Bolt M27X90 420201070727090000 O-ring 150 7 53030101150007000 7 O cycle 185 7 53030101185007000 7 Nut M30X3 T507-2001 Nut M33X3 T507-2009 Double head stud T503-3004 AM30X2-M30X3X170 Double head stud T503-4005 AM33X2-M33X3X200 Nut M30X3 T507-2001 Nut M36X3 T507-2002 Double head stud T507-3003 AM30X2-M30X3X120 Double head stud T503-4003 AM36X2-M36X3X160 Nut M39X3 T507-2011 Double head stud T503-4001 AM39X2-M39X3X95 Double head stud T503-4004 AM39X2-M39X3X110
Product Name: Linear Alkyl Benzene Sulfonic Acid (LABSA) 96% Chemical Formula: C18H30SO3 CAS Number: 27176-87-0 Description: Linear Alkyl Benzene Sulfonic Acid (LABSA) 96% is a high-quality anionic surfactant predominantly used in the formulation of detergents and cleaning products. Derived from linear alkylbenzene, LABSA 96% ensures superior performance in a wide range of applications due to its excellent detergency, emulsification, and foaming properties. Appearance: LABSA 96% typically appears as a dark brown, viscous liquid with a pungent odor. It is highly soluble in water, forming a stable solution. Key Features: High Detergency: Effectively removes dirt, grease, and stains from various surfaces. Excellent Foaming: Produces rich and stable foam, enhancing the cleaning efficiency. Good Emulsifying Properties: Assists in the dispersion of oils and fats. Versatile: Suitable for numerous cleaning and detergent formulations. Cost-Effective: Provides high performance at an economical cost. Applications: Household Cleaning Products: Laundry Detergents Dishwashing Liquids All-purpose Cleaners Industrial Cleaners: Engine Degreasers Heavy-duty Detergents Industrial Floor Cleaners Personal Care Products: Shampoos Hand Washes Technical Specifications: Active Matter: 96% min Color (Klett): â?¤ 50 Free Oil: â?¤ 2.0% Sulfuric Acid: â?¤ 1.5% Water Content: â?¤ 1.0% Packaging: LABSA 96% is available in various packaging options to suit customer requirements: 220 kg HDPE Drums 1050 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Name: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% Chemical Formula: C18H30SO3 CAS Number: 27176-87-0 Description: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% is a high-quality anionic surfactant primarily used in the formulation of detergents and cleaning products. It is derived from linear alkylbenzene, ensuring excellent performance in various applications due to its strong detergency, emulsification, and foaming properties. Appearance: LABSA 90% typically appears as a dark brown, viscous liquid. It has a pungent odor and is soluble in water, forming a stable solution. Key Features: High Detergency: Efficiently removes dirt, grease, and stains from surfaces. Excellent Foaming: Generates rich and stable foam, enhancing cleaning efficiency. Good Emulsifying Properties: Helps in the dispersion of oils and fats. Versatile: Suitable for a wide range of cleaning and detergent formulations. Cost-Effective: Provides high performance at a reasonable cost. Applications: Household Cleaning Products: Laundry Detergents Dishwashing Liquids All-purpose Cleaners Industrial Cleaners: Engine Degreasers Heavy-duty Detergents Industrial Floor Cleaners Personal Care Products: Shampoos Hand Washes Technical Specifications: Active Matter: 90% min Color (Klett): 50 Free Oil: 2.0% Sulfuric Acid: 1.5% Water Content: 1.0% Packaging: LABSA 90% is available in various packaging options to suit customer requirements: 220 kg HDPE Drums Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
