SPECIFICATIONS MODEL RDG 25 Capacity 6mm (collet) Watts Input (full Load) 420 Watts No Load Speed 25000 r.p.m. Approx Net Weight 1.5 kg. Long neck straight high speed grinder Double insulated
SPECIFICATIONS MODEL 36100 Capacity 100 20 12.7 mm Watts Input (full Load) 1000 Watts No Load Speed 5800 r.p.m. Approx Net Weight 4.7 kg. Grinding, polishing, buffing & derusting on metals Double insulated
High Wattage Double Insulated 7" / 9" Angle Grinder Weld Dressing In Fabrication Industry Specifications Model ag180 Capacity 180 22 5.5 Mm Watts Input (full Load) 2400 Watts No Load Speed 8500 R.p.m. Approx Net Weight 4.85 Kg
Palm Grip 850 Watts Double Insulated 5" Angle Grinder Light Grinding In Fabrication Segment Specifications Model 45125h Capacity 125 22.23 6 Mm Watts Input (full Load) 850 Watts No Load Speed 11000 R.p.m. Approx Net Weight 1.6 Kg.
Specifications: 850 Watts Double Insulated 4 Angle Grinder Best Use In Wall Chasing Weld Dressing & Cutting In Fabrication Segment Model 45100 Capacity 100 16 5 Mm Watts Input (full Load) 850 Watts No Load Speed 11000 / Min Approx Net Weight 1.6 Kg.
Contact material: Brass Insulator material: Black polyeater UL94V-0 Standard: PBT+30%G.F Single row/double row Right Angle Sip Type Pitch: 0.8/1.0/1.27/2.0/2.54/3.96mm(optional)
L-shaped track ruler is a special measuring tool used for measuring the distance between the inner side of railway track and the base mark and the height between the plane on the rail and the base mark. 1. Accurate measurement:keep long-term stability. 2. Easy operate 3. Insulated design
PVC flutted wall panel is made of stone and plastic.It's a style of ecological integrated wall panel,which has 8 advantages such as odorless and eco-friendly,to be directly installed on the naked wall,a variety of patterns,heat reservation and insulation,soundproof and denoising,fireproof and dampproof,easy to scrub and clean,30 years of long service life.
PVC wall panel is made of stone and plastic.It's a style of ecological integrated wall panel,which has 8 advantages such as odorless and eco-friendly,to be directly installed on the naked wall,a variety of patterns,heat reservation and insulation,soundproof and denoising,fireproof and dampproof,easy to scrub and clean,30 years of long service life.
Iso and polyol are the raw materials used to produce polyurethane. It is spray-applied, closed-cell polyurethane foam system with high fire resistance properties. It applies to all kinds of spray-applied thermal insulation engineering, such as building exterior and interior, cold rooms, large-scale pipeline, etc.
PBT is crystalline thermoplastic polyesters,featured with high heat resistance,toughness,fatigue resistance,highd insulation,good elasticity and favourable dyeing property. PBT is mainly used in masterbatches,polymer compounding,texile and industrial fabric,optical cables ,etc.
0.6/1 kV Multi-core cables, PVC insulated, unarmoured with copper conductor These cables are intended for fixed installations, indoors and outdoors, in low voltage electricity systems. They are normally used for the distribution of electrical energy in urban networks, power or switching stations, industrial plants, as well as in switchgears, in applications where there is no risk of mechanical damage
Application : Solar cables are intented for use in photovoltaic power supply systems and similar applications as free hanging, movable, fixed installation and buried in ground in constructional covered systems. The cables can be used indoor, outdoor, in hazard explosion areas, in industry and agriculture. They are suitable for applications in equipment with protective insulation (protecting Class 2). Standards : Adapted to PV systems, 2 Pfg 1169 / 08.2007 and EN 50618:2015. Voltage Rating : AC 0.6 / 1.0 kV Max. PV - System Voltage : DC up to 2.0 kV possible Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV Test Voltage : AC 6 kV / DC 10 kV (15 min.) Construction : Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5. Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation. Core Identification : Red, black or natural Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation.
We produce various types of bearings, including customized non-standard bearings, insulation bearing.With reliable quality and competitive price, we have long term cooperation with enterprises all over the world regarding related accessories.Please contact us!
ZL-1 model Steam air heater with upper inlet and lower outlet is consists of 6 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + electric control system. Steam passes the though the fin tube, dissipating heat to the insulation box, mixing and heating the fresh or recycle air to setting temperature, fans bring this hot air into drying room or heating room to be used for dehydration, dehumidification or heating. 4. Advantages/features 1. Simple structure, beautiful appearance, low cost 2. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 3. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 4. Large air volume and small wind temperature fluctuation 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
TECHNICAL DATA SHEET: Density: 1.54 �± 0.02 Hardness shore A/D: 90 ± 3 Tensile Strength (Mpa): C) - Thermal Stability at 200oC (mins): > 60 Flammability resistance: V2 Application: For insulation of wire and cable with flame retardant
Engine features: Certified by the Environmental Protection Agency (EPA) to conform to Tier III marine auxiliary standards. Closed cooling system Heat exchanger Oil drain valve Generator features: Remote start 12-pin connector Voltage regulation of ±1.0% Rotor and stator are coated with a high-bond epoxy varnish. Varnish helps prevent corrosion in high-humidity areas. Copper windings ensure minimal heat buildup. Insulation meets NEMA standards for class H insulation. Direct connected to the engine, the generator has sealed precision ball bearings with a precision-machined steel sleeve in the end bracket to prevent shaft misalignment and extend bearing life.
MODEL RW-CV35-3 Voltage 230V 50HZ Rated Power 1100W No loading speed 4400r/min Vibration Rod dia. 35mm Vibration Rod length 3M Full Load Current 5Amps. Insulation Double insulated Approx. Weight 2.4kg. 100% copper powerful motor ensure up to 4400RPM rotating speed. Ergonomic soft grip design for comfortable operation Accompany with 3.0m long 35mm dia. High efficient vibration rod. Long -life output shaft Quick change carbon brush system Aluminum gear box for long endurance lifetime. Rear D handle design ensure the operation stability and safety Superb motor ventilation system
MODEL RPM16 Voltage 230V 50HZ Rated Power 1000W No loading speed 1000r/min Mixing wheel Diameter 160mm Spindle size M12 Full Load Current 4.5Amps. Insulation Double insulated Approx. Weight 3.5kg Powerful motor ensure up to 1000RMP rotating speed Quick change carbon brush system Comfortable long handle design withstand highest torque output. Aluminum gear box for long endurance lifetime. High efficient mixing wheel design. Rear D handle design ensure the operation stability.
Everflon® ETFE is a melt-processable copolymer of tetrafluoroethylene and ethylene. Everflon�® ETFE possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack and outstanding physical toughness. It is processable by conventional extrusion, injection molding, rotomolding, rotolining, and electrostatic coating. It is available in a variety of forms including designated and powder. Application Wire and cable insulation, electrical components, coil forms, receptical sockets, connector insulators, extruded tubing, valves, fasteners, molded shapes and other end use components requiring a high performance fluoroplastic material.
