pcb fast fabrication Main Material: FR-4, High TG135TG155,TG170, Aluminum Base, High Frequency CCL Brand: Shenyi, KB, ITEQ, ISOLA, NANYA,ROGERS Sample Layers: 1-38L Mass Production: 1-24 Layers Surface Finish: LF HAL, HAL, Immersion Gold/Tin/Silver Technology: Gold Finger, PeenLble, Carbon Ink ,Impedance Control BGA,HDI Min Hole Size: 8 MIL 0.20mm Min Line Width: 3 MIL(0.076MM) Min Line Spacing: 3 MIL(0.076MM) Outline: CNC Routing, Punching, V-Cut Place of Origin: Guangdong, China (Mainland) Brand Name: IBE OEM Mounting Production: 6 SMT Lines Through Hole Production: 2 DIP Lines Enclosure Assembly: 2 Assembly Lines Certification: UL 94V0, ISO 9001 Environmental Compliance: REACH, RoHS, CMRT, PB-Free Specifications: Top PCB PCBA Electronic Manufactur Testing: 100% E-Testing Standards: IPC-A-610 E Class II-III Package: Vacuum Skin Double-Sided Profiling punching: Routing, V-CUT, Beveling Product special: Customized -
Main Material: FR-4, High TG135TG155,TG170, Aluminum Base, High Frequency ,PI CCL Brand: Shenyi, KB, ITEQ, ISOLA, NANYA,ROGERS Sample Layers: 1-38L Mass Production: 1-24 Layers Surface Finish: LF HAL, HAL, Immersion Gold/Tin/Silver Technology: Gold Finger, PeenLble, Carbon Ink ,Impedance Control BGA,HDI Min Hole Size: 8 MIL 0.20mm Min Line Width: 3 MIL(0.076MM) Min Line Spacing: 3 MIL(0.076MM) Outline: CNC Routing, Punching, V-Cut Place of Origin: Guangdong, China (Mainland) Brand Name: IBE OEM Mounting Production: 6 SMT Lines Through Hole Production: 2 DIP Lines Enclosure Assembly: 2 Assembly Lines Certification: UL 94V0, ISO 9001 Environmental Compliance: REACH, RoHS, CMRT, PB-Free Specifications: Top PCB PCBA Electronic Manufactur Testing: 100% E-Testing Standards: IPC-A-610 E Class II-III Package: Vacuum Skin Double-Sided Profiling punching: Routing, V-CUT, Beveling Product special: Customized -
Main Material: FR-4, High TG135TG155,TG170, Aluminum Base, High Frequency,AL203 CCL Brand: Shenyi, KB, ITEQ, ISOLA, NANYA,ROGERS Sample Layers: 1-38L Mass Production: 1-24 Layers Surface Finish: LF HAL, HASL, Immersion Gold/Tin/Silver Technology: Gold Finger, PeenLble, Carbon Ink ,Impedance Control BGA,HDI Min Hole Size: 0.18mm Min Line Width: 0.076MM Min Line Spacing: 0.076MM Outline: CNC Routing, Punching, V-Cut Place of Origin: Guangdong, China (Mainland) Brand Name: IBE OEM Mounting Production: 6 SMT Lines Through Hole Production: 2 DIP Lines Enclosure Assembly: 2 Assembly Lines Certification: UL 94V0, ISO 9001 Environmental Compliance: REACH, RoHS, CMRT, PB-Free Specifications: Top PCB PCBA Electronic Manufactur Standards: IPC-A-610 E Class II-III Package: Vacuum Skin Double-Sided
125khz tk4100 em4200 t5577 chip rfid key fob for access control Product name:rfid key tag / fob Physical parameters: Material:abs Dimension:43.85*30.5*5.3mm, 55.9*37.08*8.85mm, 35.52*28.255*6.3mm, 51.42*32.3*5.85mm, 40.38*31.5*4.16mm, 35*23*4.15mm, 42.5*35mm, 62.15*37.30*6.06mm, 0.38*31.5*4.16mm Custom size and shape is available Printing:silk screen printing Antennas:copper wire antenna Technical parameters: Chip options:part numbereeprom Frequency: 125khz Tk4100/ Em4200/ Em4305512 bits Em44501k bits Ata5577330 bits Working temperature:-25 degree to +50 degree Reading & writing distance:1-5cm for lf , 2-8m for hf (relative with reader) Craft options: Laser number:silk screen printingthermal number Uid code: Printing or laser numbering:decimal positive and inverse codehexadecimal positive and inverse code Key application: Public transportation Parking system Identity authentication:attendance system Admission ticketcard payment Product identification Order information: Package:100pcs in one pop bags, white box size: 6*9.3*22.5 cm 200pcs/box, Carton size: 13*23.5*50cm, 10boxes/ctn Natural package or on demand Sample availability:free sample for smart card before order is available at any time.
Loss-in-weight feeder is applicable for multi-component material such as pellet, powder or liquid. 1). OEM services provided; 2). Excellent quality assurance; 3). Fast delivery; 4). Worldwide dealer or agent needed. . Our loss-in weight feeding system with high accuracy can well meet the the demands from plastic, rubber, chemical, food, pharmaceutical industry etc. Feeding system include loss-in-weight feeder, dosing feeder, volumetric feeder, multi-component formular feeder and so on. We can supply professional feeding system for various kinds of materials. Furthermore, our networking loss-in-weight feeding system can support the factory unified database to reach the demands such as hygiene, explosion-proof, water-proof, corrosion-resistance etc. The Advantages of BATTE Screw Loss-in-weight Feeder (LF-TS Series) 1. Generous and beautiful appearance; 2. Small volume; 3. Wide measuring range; 4. Touchscreen output and customized input system designed for easy operation; 5. Low noise; 6. High stability; 7. Easy to clean and maintain; 8. Excellent control system;
Magnesia chrome bricks are made from high-grade magnesite clinker and chrome oxide. By high-pressure shaping and high-temperature firing, its characteristic is the high direct-bonding rate and big crystallite. It has good thermal spalling resistance. The lowâ??basic neutral nature gives itself good slag resistance when servicing lowâ??acid feed furnaces. Magnesia chrome bricks are a realistic lining material for refining furnaces, electric furnaces, glass melting furnaces and cement rotary kilns, etc. Applications: Used in the lining of furnaces and kilns in various industries such as steel, glass, cement, and petrochemical. Also used in the manufacturing of ceramics, non-ferrous metals, and other refractory materials. Can be used in the construction of high-temperature equipment such as heat exchangers, boilers, and incinerators. It finds its application in the field of nuclear power plants, aerospace, and defense as well.
Application 1.Remove rust and Corrosion 2.Surface pretreatment 3.Refurbishment of old parts 4.Create custom textures and artwork 5.Smoothing rough casting and edges Available abrasives Steel grit / Coal slag / Dry ice / Walnut and coconut shells / Crushed glass Type â?¢ Single inlet Venturi nozzle â?¢ Double inlet Venturi nozzle Technology Sintering and Hot Pressing Our advantages Tungsten carbide / boron carbide / silicon carbide liner can option Customized product available Professional technical support Improve your sandblasting efficiency Can customize laser marking Package Professional and secure packing 380*310*200mm 4.8~9.5 model is 30 pieces per carton
Polycarboxylate superplasticizer is the third-generation high-performance water-reducing agent developed after the general water-reducing agent represented by lignosulphonate and naphthalene superplasticizer. 1. Good compatibility with various cements,good slump retention performance of concrete,and extend construction time of concrete. 2. Low dosage,high water reduction,small shrinkage. 3. Greatly improve the early and late strength of concrete. 4. The product has low chloride content and low alkali content,which is beneficial to the durability of concrete. 5. The production process of this product is non-pollution and does not contain formaldehyde. 6. Using polycarboxylate superplasticizers,more slag or fly ash can be used instead of cement to reduce costs.
Product Introduction: High alumina brick refers to refractory products with Al2O3 content higher than 48%.It is made of bauxite or other raw materials of high alumina content .The refractoriness of high alumina brick can be more than 1770 C . According to the content of Al2O3, high alumina bricks are usually divided into three grades: Grade I Al2O3 content 75%; Grade II Al2O3 content is 60 75%; Grade III Al2O3 content is 48~60%. Application: High alumina bricks are mainly used for lining blast furnaces, hot blast furnace, electric furnace roofs, blast furnaces,reverberatory furnaces, and rotary kilns. Features: 1.Low creep. 2.Good slag resistance. 3.Strong thermal shock stability. 4.Good erosion resistance.
Garnet as a natural abrasive can be used for waterjet cutting because of its high hardness, high cutting speed. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hardness/durability creates the optimum abrasive efficiency, lowest abrasive consumption (kg/m2) at the highest production rates (m2/hr). Compared with rock garnet, river garnet sand can keep the cutting surface smooth and flat. Because river sand is formed after a long time of impact, so its grain edge surface is more rounded, less damage to the material. Products cut from river garnet are more popular with consumers. -Sharpe Angular Edges; -High Hardness, Faster Cutting Efficiency; -Uniform Size Distribution, No Stuck in Nozzle; - No Free-Silica.
Iridium Alloy from Mexico Origins: Mexico Quantity: About 7 tons. Supply Capability: Between 50 to 250 Kilos per week until quantity reaches 7 tons. After that, new material will be extracted. Incoterms: FOB The alloy is being obtained by screening an old Gold mine slags. The mine is located in the State of Chihuahua and have vast reserves of precious metals shavings. The shavings can be further processed to get ingots with very high % of Iridium (> 30%) along with some % of Gold, Silver, etc The product can be offered in Ingots or Shavings at customer request. Chemical Analysis: Gold (Au): 3.53% Silver (Ag): 0.275% Iridium (Ir): 35.37% Copper (Cu): 56.26% Lead (Pb): 4.56% In case of interest, please feel free to contact us at any time. Saludos/Best Peter
Brief Introduction for motorized ladle cart With the functions of steady traveling, stepless speed regulation, the motorized ladle cart is commonly applied to transfer steel ladle, aluminum ladle, lead ladle, steel slag etc. Generally the outer surface temperature of the ladle is 200-300 degree , due to the high temperature, the motorized ladle cart should be designed with heat exposure proof device, especially to the battery, motor, reducer and electric appliance. Features of motorized ladle cart 1) Simple structure, easy in installation and maintain. 2) The rail wagon platform is suitable for high-temperature and explosion-proof condition. 3) Safety, flexibility, high using frequency, long using time, long service life. 4) Custom deck configurations may include lift, tilt, or rotate function.
Meibang was specilzed in belt press filter machine more than ten years, which fit for industries sludge and plant resiude dewatering .we have served successfully  more than 3000 case enterprises. Industries sludge: sands washing plant, mine tailings,piling sludge,river silt treatment, ceramics polishing sludge, parameters : Press filter machine item:DYQ1000P3 Main engine power:4KW Whole set power:10kw Filter belt width:1000 mm Shape dimensions(mm): length 4500, width: 1500, height: 2300 Through put:5t-20t/h Operation mode: Full-automatic without workers Total weight:about 4t farm--plant residue: fruit and vegetable dewatering, animal dung dewatering, Chinese medicine tailings, cassava slag, coconut dewatering, coco peat dewatering,etc.,
Meibang was specilzed in belt press filter machine more than ten years, which fit for industries sludge and plant resiude dewatering .we have served successfully  more than 3000 case enterprises. parameters : Press filter machine item:DYQ1000P3 Main engine power:4KW Whole set power:10kw Filter belt width:1000 mm Shape dimensions(mm): length 4500, width: 1500, height: 2300 Through put:5t-20t/h Operation mode: Full-automatic without workers Total weight:about 4t Industries sludge: sands washing plant, mine tailings,piling sludge,river silt treatment, ceramics polishing sludge, farm--plant residue: fruit and vegetable dewatering, animal dung dewatering, Chinese medicine tailings, cassava slag, coconut dewatering, coco peat dewatering,etc.,
Features 1. Light weight, easy for installation and movement. 2. The costs and performances are much better than steel pontoons. 3. Good Flexibility, excellent impact resistance, particularly suitable in the open sea. 4. Higher corrosive resistance, anti-uv, anti-aging ,it can be used for 5-8 years,3 times longer than steel floater. 5. The outer and inner wall are very smooth, friction coefficient is tiny, all of these features are good for transmission. 6. It can be used from â?? 60 to 80 ° c. Application: The MDPE floater is widely applied in dredging and mine tailings area for delivering the fluid that contains the medium of mud, slag and so on. Tengyuan can supply municipal engineering pipe, dredging engineering pipe, HDPE Gas Pipe, Power Engineering Pipe, Mining Pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.
SEPPE Garnet is an integrated garnet mining, processing, shipping and distribution organisation providing the best quality industrial garnet for the surface preparation and waterjet cutting industries. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hardness/durability creates the optimum abrasive efficiency, lowest abrasive consumption (kg/m2) at the highest production rates (m2/hr). SEPPE garnet for waterjet cutting, they're extracted from almandine, since it is more angular in form, more efficient in cutting. Mixed with very high pressure water, garnet is used to cut steel andother materials in waterjets. SEPPE garnet for sandblasting, it is a alluvial garnet grains which arerounder, more suitable for blasting treatments.
Portland cement clinker is ground to a fine powder and used as the binder in many cement products. A little gypsum is sometimes added. It may also be combined with other active ingredients or chemical admixtures to produce other types of cement including: ground granulated blast furnace slag cement pozzolana cement silica fume cement Clinker, if stored in dry conditions, can be kept for several months without appreciable loss of quality. Because of this, and because it can easily be handled by ordinary mineral handling equipment, clinker is traded internationally in large quantities. Cement manufacturers purchasing clinker usually grind it as an addition to their own clinker at their cement plants. Manufacturers also ship clinker to grinding plants in areas where cement-making raw materials are not available.
Shaking table for recovering scrap metals >> Easy operation and maintenance >> High separation efficiency >> Circulation water >> The deck can be adjusted horizontally >> Equipped with speed adjustable motor >> Acceptable feeding size as big as 32mm Product description The YC-4 shaking table is a special equipment for recovering the scrap metals such as aluminum, copper, the Au, Cu, Ag from various of slags, PCB, waster wire and cable, and so on. The drive way of this shaking table is: motor and reducer box. The slope of deck can be adjusted horizontally, Equipped with speed adjustable motor. Its working principle and structure are almost the same as that of the 6-s series shaking table. Technical specification Name Unit Parameter Model YC-4 Cross section shape of deck Rectangular Deck size (L*W) mm 4000*1500 Stroke length mm 150 Frequency rpm 60-120 Max feeding size mm 32mm
Fused Magnesite sandIntroductionProduction Characteristic and application:The materials are mainly used in high power and ultrahigh power electrical furnace,Website:http://www.magnesium-supplier.com, refining furnace rotation kilnin cement industry and so on.The products are characteristic with high purity,good high temperature bulk stability and excellent slag-corrosion-resistance.We can produce different sizes according to customersâ?? requirements.SpecificationCr2O3MgOSiO2CaOFe2O3Al2O3Sizeg/cm314-16% 65% 1.0% 1.0% 12 % 8.0%0-60mm 3.6516-18% 60% 1.0% 1.0% 10% 7.0%0-60mm 3.6518-20% 58% 1.0% 1.2% 9.0% 8.0%0-60mm 3.68 20% 60% 0.7% 0.8% 8.0% 6.0%0-60mm 3.7048-49%48-49% 1.0% 1.0% 1.0 1.0%0-60mm 3.70