600W Solar Grid Tie Inverter 22 V-60 VDC 90V-260VAC MPPT Micro Grid tie Pure sine wave are: Package included: 1 x600W Grid tie Inverter 1 x AC Power plug 1 x User Manual Features: Directly connected to the solar panels (do not need to connect the battery) by MPPT function, APL functions; AC 0 angle with high precision auto-detection; Synchronous High-frequency Modulation; Pure Sine Wave Output; Automatic Sensing Function Solar Luminosity; Power Automatically Locked (APL); Maximum Power Point Tracking (MPPT); Automatically Adapt To Different Load Power Factor; Constant Current, Constant Power; Automatically Shut Down When The Power Output Of a Fault; Current Limit Protection; Stack Multiple Machines; High-Frequency High Conversion Rate; 200W 300W 400W 500W 600W 800W 1000W is available. How to choose the inverter according to your solar panel: Generally say, the working voltage(max power voltage) is the key point to choose the right inverter for your grid tie system. solar panel is 30VDC (Max power voltage) , Choose 22-60 VDC solar panel is 36VDC (Max power voltage) , Choose 22-60 VDC please contact us before you buying, we will check the feasibility for you,so you don't lose money!
300W Grid Tie Inverter 10.5V-28Vdc 90V-260Vac Mppt Micro Grid Tie Pure Sine Wavepackage Included: 1 X300W Grid Tie Inverter 1 X Ac Power Plug 1 X User Manual Features: Directly Connected To The Solar Panels (Do Not Need To Connect The Battery) By Mppt Function, Apl Functions; Ac 0 Angle With High Precision Auto-Detection; Synchronous High-Frequency Modulation; Pure Sine Wave Output; Automatic Sensing Function Solar Luminosity; Power Automatically Locked (Apl); Maximum Power Point Tracking (Mppt); Automatically Adapt To Different Load Power Factor; Constant Current, Constant Power; Automatically Shut Down When The Power Output Of A Fault; Current Limit Protection; Stack Multiple Machines; High-Frequency High Conversion Rate; Wide Range Input Voltage 10.5-28V. 200W 300W 400W 500W 600W 800W 1000W Is Availble. Generally Say, The Working Voltage(Max Power Voltage) Is The Key Point To Choose The Right Inverter For Your Grid Tie System. Solar Panel Is 18Vdc ( Max Power Voltage) , Choose 10.5-28Vdc Solar Panel Is 30Vdc (Max Power Voltage) , Choose 22-60Vdc Solar Panel Is 36Vdc (Max Power Voltage) , Choose 22-60Vdc Solar Panel Voltage Is Not The 18Vdc 30Vdc 36Vdc,(Max Power Voltage) Please Contact Us Before You Buying, We Will Check The Feasibility For You,So You Don'T Lose Money!
600W Solar Grid Tie Inverter 22 V-60 VDC 90V-260VAC MPPT Micro Grid tie Pure sine wave are: Package included: 1 x600W Grid tie Inverter 1 x AC Power plug 1 x User Manual Features: Directly connected to the solar panels (do not need to connect the battery) by MPPT function, APL functions; AC 0 angle with high precision auto-detection; Synchronous High-frequency Modulation; Pure Sine Wave Output; Automatic Sensing Function Solar Luminosity; Power Automatically Locked (APL); Maximum Power Point Tracking (MPPT); Automatically Adapt To Different Load Power Factor; Constant Current, Constant Power; Automatically Shut Down When The Power Output Of a Fault; Current Limit Protection; Stack Multiple Machines; High-Frequency High Conversion Rate; 200W 300W 400W 500W 600W 800W 1000W is available. How to choose the inverter according to your solar panel: Generally say, the working voltage(max power voltage) is the key point to choose the right inverter for your grid tie system. solar panel is 30VDC (Max power voltage) , Choose 22-60 VDC solar panel is 36VDC (Max power voltage) , Choose 22-60 VDC please contact us before you buying, we will check the feasibility for you,so you don't lose money!
Hydraulic end assembly AH0501010500 AH35001-05.00 Hydraulic end assembly AH0801010500 AH34001-05.00 Hydraulic end assembly AH1001010500 AH33001-05.00 Exhaust filter assembly AH0501011400 AH35004-11.00 Exhaust filter assembly AH1001011900 AH33014-04.00 Cross head assembly AH0501010400 AH35001-04.00 Cross head assembly AH0801010400 AH34001-04.00 Cross head assembly AH1001010400 AH1001010400 Pinion shaft assembly AH0501010300 AH35001-03.00 Pinion shaft assembly AH0801010300 AH34001-03.00 Pinion shaft assembly AH1001010300 AH33001-03.00 Crankshaft assembly AH0501010200 AH35001-02.00 Crankshaft assembly AH0801010200 AH34001-03.00 Crankshaft assembly AH1001010200 AH33001-02.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Power end lubrication assembly AH0801010600 AH34001-06C.00 Power end lubrication assembly AH1001010600 AH33001-06C.00 Spray pump assembly AH0501010800 AH35001-08B.00 Spray pump assembly AH0801010800 AH34001-08B.00 Spray pump assembly AH1001010800 AH33001-08C.00 Random tool AH0501011500 AH35001-20.00A Random tool AH0801011400 AH34001-15.00A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09 Rubber strip 25 Ã?? 10 Ã?? 4000 Rubber strip 25X10X4880 Ventilation hood T515-1001.00 T515-1001.00 Oil level gauge assembly AH1001011400 AH33001-18.00 Seal gasket AH05010111 AH35001-12 Seal gasket AH08010111 AH34001-12 Seal gasket AH10010112 AH33001-15 Sealing washer AH10010116 AH36001-19 Seal gasket AH05010113 AH35001-15 Seal gasket AH10010116 AH36001-19 Seal gasket AH10010118 AH33001-25 Cylinder assembly AH050101050100 AH35001-05.01A.00 Cylinder assembly AH100101050100 AH33001-05.01A.00 Cylinder head flange AH0501010502 AH35001-05.02 Cylinder head flange AH1001010502 AH33001-05.02 Cylinder head AH0501010503 AH35001-05.03A Cylinder head AH1001010503 AH33001-05.03A Cylinder liner sealing ring AH0501010504 AH35001-05.04 Cylinder liner sealing ring AH1001010504 AH33001-05.04 Cylinder head plug AH050101050500 AH35001-05.05A Cylinder head plug AH100101050500 AH33001-05.05A O-ring 75 Ã?? 5.3 530301010750053000 GB3452.1-82 O-ring 97.5 Ã?? 3.55 530301010975035000 GB3452.1-82 Discharge line AH0501010507 AH35001-05.08 Discharge line AH0801010501 AH34001-05.01 Discharge line AH1001010507 AH33001-05.08 Bonnet seal ring AH0501010508 AH35001-05.09 Bonnet seal ring AH1001010508 AH33001-05.09 Valve cover AH0501010509 AH35001-05.11A Valve cover AH1001010509 AH33001-05.11A Stem guide (I) AH0501010510 AH35001-05.12 Stem guide (I) AH1001010510 AH33001-05.12 Spring guide AH100101051100 AH33001-05.13.00 Baffle AH0501010511 AH35001-05.13 Baffle AH1001010512 AH33001-05.14 Valve spring AH1001010529 AH00000101 AH33001-05.16A Valve assembly AH0000020500 AH35001-05.14A.00 Valve assembly AH0000020100 AH33001-05.17A.00
Product Introduction Chromium Mist Dust Removal for Rotogravure cylinder making machinery Chromic acid density are high and easy cohesion. First retrieve chromium acid. Chrome dust for gravure chrome plating machine the rest pollutants of waste-air enter into the subsequent mist purifier. After treated by the physical and chemical absorption, the pollutants will be absorbed in the wash solution to achieve removing the substance of contamination Product Advantage 1.Chromic acid is an expensive reagent, and the recycling of chromic acid is very valuable. Chromic acid density is larger and easy to condense, chromium acid fog collection, under the action of induced fan, into the recovery device, Chrome dust for gravure chrome Electroplating tank device set multi-layer interception filter, through the filter interception effect, make the chromium acid fog condensation into liquid, liquid chromium acid along the filter into the lower recovery container, lower recycling container set recovery pipe, when the recovery liquid reaches a certain amount, discharge chromium liquid in the recovery device. 2.Spray tower for absorption of acid mist Working principle: The porous sieve plate exhaust gas scrubbing tower is adopted. Engravure printing cylinder Chrome dust for Electroplating gravure cylinder the scrubbing solution will be evenly sprayed to the surface of fillers through nozzles to keep the surface wet when the exhaust gas flows through the filling layer in scrubbing tower, meanwhile, the exhaust gas will contact with the scrubbing solution on fully wetted filling layer, and by utilizing the physical and chemical effects, the pollutants in exhaust gas will be absorbed by the scrubbing solution, thus to realize the purpose of pollutants removal; then, the water saturated gas will be treated in demister to remove extra moisture. The clean gas after being scrubbed in scrubber and dried can meet certain standards, and can be discharged into the atmosphere.
CHOCKFAST ORANGE (PR-610TCF) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. CHOCKFAST is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non-shrinking and has very high impact and compressive strength. Years of successful in service experience have shown the use of PR610TCF to be a far superior yet less expensive method of establishing and permanently retaining precise equipment alignment under extreme conditions. PR-610TCF is approved or accepted for its intended marine use by American Bureau of Shipping, Lloyd's Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most other major regulatory agencies worldwide. Benefits CHOCKFAST ORANGE was developed as a chocking or grouting compound for use under marine main propulsion machinery in depths of to 4 (12mm to 100mm). The compound is used under diesel and gas engines, reduction gears, generators, compressors, pumps, bearing blocks, crane rails and numerous other applications. PR-610TCF requires no special tools or special skills as does chocking with steel. When cast, CHOCKFAST ORANGE flows readily into the chock area filling voids and conforming to all irregularities. This eliminates the machining of base plates or foundations for a perfectly fitted chock. Packing details : 6.8 kg Per Unit 4261 CC
started manufacturing Polymer Soluble dyes in 2003 and since then, we have slowly but steadily, introduced new products into our range which now covers a diverse range of colours with a total capacity of 1000 tons/year. Polymer-soluble solvent dyes, often referred to as solvent-soluble dyes are essential in colouring plastic products. These dyes are specifically crafted to dissolve effortlessly in polymers, offering a seamless integration that transforms the appearance of plastics with vibrant and long-lasting hues. As a leading manufacturer of dyes in India, we take pride in presenting a range of high-quality polymer-soluble dyes that cater to the diverse needs of the plastic industry. The solvent dyes refer to the dye being insoluble in water but soluble in an organic solvent. Solvent dye powder are used to color organic solvents, hydrocarbon fuels, oil, waxes, lubricants, plastics, ink, coatings, and resin. Solvent dyes can be divided into oil & wax soluble which are mainly used for fuels and resin coloring, and solvent-soluble deys which are mainly used for ink, and plastics colouring. Baoxu offer a wide range of solvent dyes including solvent blue, black, green, orange, red, yellow, and violet. Click on to check product details, contact us if need a sample or inquiry. solvent red: 23, 24, 25, 41, 52, 111, 135, 146, 149, 168, 179, 195, 196, 197, 207 solvent yellow: 14, 16, 54, 93, 98, 114, 147, 157, 160:1, 163, 176 solvent blue: 35, 36, 67, 78, 97, 104, 122 solvent violet: 13, 26, 31, 36, 37, solvent orange: 14, 60, 63, 107 solvent green: 3, 5, 28
Attapulgite suspension agent is a thixotropic anti-sinking thickener, which is made of natural rare minerals processed by high-tech special technology, and its main composition is crystalline magnesium aluminum silicate hydrate. It has good anti-sinking and thickening effect in both water-based and solvent-based systems. Specification Powder Colour Grayish white Viscous ,CPS 2000, no precipitation. Mesh Number 200 Moisture,% �¢?�¤12 PH 8-10 Proportion 2.35 Packing Density, g/cm3 : �¢?�¤0.50 Application areas: High-grade putty, paint, ink, liquid fertilizer, pesticide, lubricating oil, fine chemical, printing and dyeing paste, etc. 1. Good thickening. The paint film is plump and the can opening effect is good. 2. Good suspensibility. Prevent paints and paints from precipitation and delamination 3. Good shakiness. It is easy to brush, thinning under the action of shear force and thickening after rest. 4. Good thixotropy. Direct addition, good compatibility, no need to change the process and formula 5. Good leveling. Anti-shrinkage hole and fisheye, not easy to hang 6. Good weather resistance. It has strong acid and alkali resistance, corrosion resistance and mildew resistance. 7. Good thermal insulation. High temperature resistance, thermal insulation, insulation 8. Good environmental protection. Chemical inertia, no pollution, inhibit the growth of microorganisms, absorb toxic volatile components, green environmental protection. As the suspension agent and carrier of pesticides, attapulgite is widely used in pesticides, fungicides, herbicides and so on because of its high oil absorption rate and moderate pH. It can prolong the efficacy, prolong the shelf life and reduce the production cost of pesticides.
AIR FORCE (19") 160CC HONDA HOVER MOWER Price:$468.90 SKU:F-19 Brand:Air Force Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Advanced Design With High Quality Materials Allows you to maximize time and effort for turf care needs Powerful 160cc Honda GCV 4-Cycle Engine Mounted in reverse to maximize oil lubrication to the engine Cup and dipper spashing system showers internal components High performance fuel pump ensures constant delivery of fuel Extra Strength Reinforcement 7-point engine mount with steel insert reinforcement Extra thick handle mounts are set low & wide for better stability 19-Inch, Injection-Molded ABS Mower Deck Coated for UV and chemical restistance Exceptionally strong yet lightweight deck enhances mower lift 14-Inch Lightweight Impeller Provides maximum lift and smoother mowing Operator Presence Control With Blade Brake Detects when operator releases their grip and cuts the engine Heavy Gauge Steel Handles 53" handle for maximum reach Padded for added comfort Not Recommended For Use On More Than A 45 Degree Angle Specifications Engine Engine Brand Honda GCV Starting System Recoil Start Engine Cycle 4-Cycle CC 160 CCs Fuel Tank Size 0.24 Gallons Engine Cylinders 1 Cylinder Oil Filter No Torque 6.9 Lbs Consumer Engine Warranty 2 Years Commercial Engine Warranty 90 Days Deck Blades 3 Blades Cutting Width 19 Inches Cutting Height .5-2.5 Inches Drive Drive System Push Overview Weight 38 Pounds Consumer Warranty 1 Year
Features for the DR Power WM13026DEN Wide Area Mower FLEX-SPEED Drive System Match your mowing pace to your walking pace by squeezing a pressure-sensitive, ergonomically designed hand lever. Simply pull the lever toward you to increase speed or relax your grip to slow down. Dual Blade Design Twin blades allow for greater blade tip speed than one longer blade and that produces a clean, high-quality cut. The leading blade (on operator's left side) feeds its clippings into the trailing blade, so they get recut resulting in more finely chopped clippings and small windrows when using side discharge. 3-in-1 Mower Bag, mulch, or side discharge. Bagger and mulching plug included with your mower. Bagger holds up to 2 bushels, so you spend more time mowing and less time emptying. Powerful OHV Engine DR OHV engine has 8.8 ft.-lbs. gross torque (@2500rpm as per SAE J1940). Plenty of power to handle the extra mowing width. One-Touch Height Adjustment Choose from 8 different cutting height settings, from 1" to 4". Never Flat Tires Roll along easily with no-maintenance, never flat wheels â?? 8" high in the front, 10" in the rear. Specifications General CARB Certified: Yes Cutting Blade Tip Speed: 19,000 FPM Cutting Height: Adjustable, 1" to 4" Cutting Width: 26" Grass Bagger Capacity: 2.5 bushels Number of Blades: 2 Engine Air Filter: Paper Cooling Methods: Air cooled Displacement: 200 cc Engine Type: OHV Ft Lbs. Torque: 8.8 Lubrication: Splash Make: DR Number Of Cylinders: 1 Oil Capacity: 17oz Oil Type: SAE 30W HD Pre-Cleaner: Foam
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated air to produce a new and high-temperature air. Under the action of the fan, it is discharged to provide heating for drying machines or places. Advantages/features 1. Simple structure and low cost 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
Crankcase Precision cast oxidation treated surface of the crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U"type "Nbr/Com/Buna N" material enhances the performance of the waterpump and improves its service life. The plunger support guide ring ensures thecoaxiality of the plunger, extending the service life of the water seal andplunger. Pump head assembly Selected stainless steel material, new and efficient structuraldesign, high strength, no pores, long service life, and safe operation.Reinforced 8-bolt fastening, 18mm, grade 12.9. Check valve assembly The valve cage is made of sturdy and durable materials, with stainlesssteel 303 and 404 poppet valves and springs to extend its service life. Thedisassembly and assembly of one-way valve components is simple and easy tomaintain Pommel Precision machined hard solid ceramic plungers, as well asthickened SST limit bolts, provide longer service life, better durability andapplicability. Bearing Large tapered ball bearings ensure the concentricity of thecrankshaft connecting rod and ensure stable operation of the water pump. Bearing Block Precision machining ensures coaxiality and concentricity. Crank axle Precision forging process and hardening treatment ensure thestrength, service life, and durability of the crankshaft. Oil viewing window The oil viewing window located behind the water pump isconvenient for checking the oil level and easy to repair. Precision die-castingand high-quality sealing rings ensure the sealing effect of the rear cover. Oil seal and O-ring A better crankcase oil sealing system, with stainless steelsprings for oil seals and O-ring seals to ensure sufficient tension. Plunger connecting rod Super strong alloy material, split structure, higher loadstrength, longer service life, ensuring safe and stable operation.
Crankcase: Precision cast oxidation treated surface of the crankcase. High and low pressure water seal components: The high and low pressure water seal design of the "U"type special material enhances the performance of the water pump and improvesits service life. The plunger support guide ring ensures the coaxiality of theplunger, extending the service life of the water seal and plunger. Pump head assembly: Selected stainless steel material, new and efficient structuraldesign, high strength, no pores, long service life, and safe operation.Reinforced 8-bolt fastening, 18mm, grade 12.9. Check valve assembly: The valve cage is made of special materials that are sturdy anddurable. The stainless steel poppet valve and spring extend its service life.The disassembly and assembly of one-way valve components is simple and easy tomaintain. Pommel: Precision machined hard solid ceramic plungers, as well asthickened SST limit bolts, provide longer service life, better durability andapplicability. Bearing: Large tapered ball bearings ensure the concentricity of thecrankshaft connecting rod and ensure stable operation of the water pump. Bearing Block: Precision machining ensures coaxiality and concentricity. Crank axle: Precision forging process and hardening treatment ensure thestrength, service life, and durability of the crankshaft. Oil viewing window: The oil viewing window located behind the water pump isconvenient for checking the oil level and easy to repair. Precision die-castingand high-quality sealing rings ensure the sealing effect of the rear cover. Oil seal and O-ring: A better crankcase oil sealing system, with stainless steelsprings for oil seals to ensure sufficient tension. Plunger connecting rod: Super strong alloy material, split structure, higher loadstrength, longer service life, ensuring safe and stable operation. Liquid inlet medium: Acidity, alkalinity, temperature 85 .
Oil window: The oil viewing window located on the side of the water pump iseasy to inspect and the oil level is easy to repair. High and low pressure water seal components The high and low pressure dual water seal design of the"U" type "Buna N" material enhances the performance of thewater pump and improves its service life. The plunger support guide ringensures the coaxiality of the plunger, extending the service life of the waterseal and plunger. Pump head assembly: Selected forged brass material, high strength, no porositydefects, long service life, high pressure resistance, stable operation,reinforced 6-bolt fastening, 10mm, grade 8.8. Check valve assembly: The valve cage is made of specialmaterials that are sturdy and durable. The stainless steel 303 and 404 poppetvalves and springs, as well as the brass valve seat and cover, are sturdy anddurable, extending their service life. Pommel Precision machined hard solid ceramic plunger, sturdy anddurable. Crank Axle Accurate rounded corners and process treatment ensure durabilityand service life. Oil seal and O-ring A better crankcase oil sealing system, with stainless steelsprings for oil seals and O-ring seals to ensure sufficient tension. Bearing The positioning of large-sized bearings and snap rings ensuresthe concentricity of the crankshaft connecting rod, ensuring stable operationof the water pump. Bearing Block Precision machining ensures coaxiality and concentricity. Plunger Connecting Rod The high-quality alloy connecting rod has high load strength,durability, and stable operation. Crankcase The surface of the crankcase that has been oxidized by precisioncasting is a classic streamline design.
This is a powerful 8 KW solution designed for precise and efficient welding of PVC and PU based products. With advanced features and robust construction, this machine ensures reliable performance for high-frequency welding and embossing applications. Anti-Spark Electric System: Equipped with an anti-spark electric system, this machine ensures safe operation and minimizes the risk of electrical hazards, providing peace of mind during usage. Safety Device: The inclusion of a safety device enhances operator safety by providing additional protection during operation, prioritizing the well-being of the user. Special Mechanical Structure: Featuring a special mechanical structure, this machine ensures uniform pressure for PVC welding, resulting in consistent and high-quality welding outcomes. Easy Tuning and Special Protection Circuit: The machine allows for easy tuning, enabling quick adjustments and precise control during the welding process. The special protection circuit safeguards the equipment from electrical fluctuations, enhancing its durability and longevity. Hydraulic Pressure Device: The hydraulic pressure device provides precise control over pressure, making it suitable for welding even challenging alignment products, increasing the versatility of the machine. Model No. BS-602 Power 8 KW Voltage 220V or 380V Input Power 8.5 KVA Frequency 27.12 or 40.68MHZ Maximum Electrode Spacing 160-220mm Working Table 350 x 700mm or 400 x 700mm Temperature Control Range 50-300C Adjustable Welding Time 0-10s Adjustable Table Size 1070 x 1210mm Oil Hydraulic 68no Oil Capacity 30 Ltr. Dimension 1070 x 1680 x 1560 Machine Weight 320 KG
This is a powerful 8 KW solution designed for precise and efficient welding of PVC and PU based products. With advanced features and robust construction, this machine ensures reliable performance for high-frequency welding and embossing applications. Anti-Spark Electric System: Equipped with an anti-spark electric system, this machine ensures safe operation and minimizes the risk of electrical hazards, providing peace of mind during usage. Safety Device: The inclusion of a safety device enhances operator safety by providing additional protection during operation, prioritizing the well-being of the user. Special Mechanical Structure: Featuring a special mechanical structure, this machine ensures uniform pressure for PVC welding, resulting in consistent and high-quality welding outcomes. Easy Tuning and Special Protection Circuit: The machine allows for easy tuning, enabling quick adjustments and precise control during the welding process. The special protection circuit safeguards the equipment from electrical fluctuations, enhancing its durability and longevity. Hydraulic Pressure Device: The hydraulic pressure device provides precise control over pressure, making it suitable for welding even challenging alignment products, increasing the versatility of the machine. Model No. BS-602 Power 8 KW Voltage 220V or 380V Input Power 8.5 KVA Frequency 27.12 or 40.68MHZ Maximum Electrode Spacing 160-220mm Working Table 350 x 700mm or 400 x 700mm Temperature Control Range 50-300�°C Adjustable Welding Time 0-10s Adjustable Table Size 1070 x 1210mm Oil Hydraulic 68no Oil Capacity 30 Ltr. Dimension 1070 x 1680 x 1560 Machine Weight 320 KG
4.Main technical parameters 4.1. Capacity: 5, 10, 20, 25, 50100200kg (optional) 4.2. Unit switching: kg, N, LB 4.3. Load decomposition degree: 1/250,00 4.4. Load accuracy: 0.25% 4.5. Maximum stroke: 1000mm (excluding fixtures) 4.6. Test speed: 30-300 mm/min 4.7. Displacement resolution: 0.01 mm 4.8. Display device: touch screen (capable of displaying and printing test times, test values, maximum values, fracture values, etc.) 4.9. Motor: AC motor 4.10. Overall dimensions (L * W * H): 550 * 500 * 1240mm 4.11. Weight: 80kg 4.12. Power supply: 1 , 220V, 15A or specified 4.13. Delivery: One set of tension fixtures 5. Introduction to System Functions 5.1. It has tensile and pressure testing functions. 5.2. It has a pull stop function. 5.3. It can display displacement, has functions such as elongation, pressure, and other material testing machines. 5.4. There is an automatic stop alarm function for overload load setting. 5.5. It has an automatic save function, and can coexist with manual and automatic testing data up to ten times. 5.6. Use a list format to display the saved test data. 5.7. With an administrator password, users can modify their startup password to make machine management more secure. 5.8. Using software to calibrate the load value is extremely easy to calibrate. 5.9. The internal functions are set with full Chinese prompts, making the operation convenient and simple. 5.10. Rich testing functions, capable of conducting tensile tests, pressure tests, compressive tests, elongation tests, etc. 5.11. Display method: Real time display on the touch screen. 5.12. Tensile range: Standard configuration 200kg (optional). 5.13. The accuracy is 1/25000. 5.14. It can print test data and dates, making it easy to view test data for each stage 5.15. Conversion of three types of force units: N, Kg, and LB. During the testing process, 5 sets of test data at any position can be manually and automatically captured and printed. 7. Introduction This product tests the tensile strength, compressive strength, and elongation of various materials, semi-finished products, and finished products. It can perform tests such as peeling, tearing, bending, bending, and compression, and is suitable for use in industries such as metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, leather, etc. 8. Design standards ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7, etc
Affordable 5*10 feet CNC plasma and gas/flame cutting machine (CNC plasma cutter) is widely used in industry of Ship Building, Construction Equipment, Transport Equipment, Aerospace Industry, Bridge Building, military industrial, wind power, Structural Steel, Boiler containers, Agriculture Machinery, Chassis electrical cabinets, Elevator manufacturers, Textile Machinery and so on. Features of Affordable 5*10 feet CNC plasma and gas/flame cutting machine (CNC plasma cutter): 1. Three torch: plasma torch , gas/flame torch, marking torch for different materials. 2. TORCH HEIGHT CONTROLLER--The numerical control system with high disposes, the automatic striking arc, the performance is stable. STARFIRE cutting system panel, Auto Initial Height Sensing, Arc Voltage Divide etc, can cut different thickness, automatic height control, easy operation, high efficiency. 3. Blade and saw working table for choose, support heavy metal with high stability. 4. High precision square rail, and rack gear. 5. HUAYUAN plasma power supply(USA HYPERTHERM for optional),excellently performance, low failure rate, more secure. 6. Stepper motor (servo for optional) cooperate with precision machinery transmission system, faster and more stable, higher cutting efficiency. Affordable 5*10 feet CNC plasma and gas/flame cutting machine (CNC plasma cutter): Working area 1300*2500mm, 1500*3000mm, 1500*6000mm (can be customized) Transmission High precision Rack Gears, Ball Screw X, Y, Z Rail Square Rail Cutting Thickness 0-30mm, plasma cutting 8-200mm,gas /flame cutting Cutting Speed 0-12000m/min Plasma Generator 63A (more optional 120A,160A ,200A) Motor Stepper motor(servo motor optional) Control system STARFIRE, FANGLING, Document transmission form USB interface Working voltage 3 phase 380V 220V 50HZ/60HZ Software CAD, FASTCAM,ARTCAM
Product Description Product Info for Nikon 8x42 Monarch M7 Binoculars Boasting a wide viewing angle that presents an immersive viewing experience, Nikon's black 8x42 Monarch M7 Binoculars have improved design features compared to previous iterations, with the same focus on comfort and performance the line is known for. Featuring extra-low dispersion glass elements with anti-reflection fully multicoated optics and highly reflective dielectric-coated, phase-corrected roof prisms, complemented by exterior lens coatings that repel water and oil, the Monarch M7 produces bright and clear high-contrast images with true-to-life color and minimal color fringing. Performance Magnification: 8x Objective Lens Diameter: 42 mm Angle of View: 8.3�° (Actual) 60.3�° (Apparent) Field of View: 435' @ 1000 yd / 144.4 m @ 1000 m Minimum Focus Distance: 8.2' / 2.5 m Exit Pupil Diameter: 5.25 mm Eye Relief: 17.1 mm Interpupillary Adjustment: 56 to 72 mm / 2.2 to 2.8" Diopter Adjustment: Yes Focus Type: Center Features Fogproof: Yes, Nitrogen Filled Water Resistance: Waterproof General Dimensions: 5.6 x 5.1 x 2.2" / 14.2 x 13 x 5.6 cm Weight: 23.6 oz / 670 g
Product Description Product Info for Nikon 10x30 Monarch M7 Binoculars Boasting a wide viewing angle that presents an immersive viewing experience, Nikon's black 10x30 Monarch M7 Binoculars have the same focus on comfort and performance as previous iterations with an updated look and compact design. Featuring extra-low dispersion glass elements with anti-reflection fully multicoated optics and highly reflective dielectric-coated, phase-corrected roof prisms complemented by exterior lens coatings that repel water and oil, the Monarch M7 produces bright and clear high-contrast images with true-to-life color and minimal color fringing. Performance Magnification: 8x Objective Lens Diameter: 42 mm Angle of View: 8.3�° (Actual) 60.3�° (Apparent) Field of View: 435' @ 1000 yd / 144.4 m @ 1000 m Minimum Focus Distance: 8.2' / 2.5 m Exit Pupil Diameter: 5.25 mm Eye Relief: 17.1 mm Interpupillary Adjustment: 56 to 72 mm / 2.2 to 2.8" Diopter Adjustment: Yes Focus Type: Center Features Fogproof: Yes, Nitrogen Filled Water Resistance: Waterproof General Dimensions: 5.6 x 5.1 x 2.2" / 14.2 x 13 x 5.6 cm Weight: 23.6 oz / 670 g
