Product Description Thanks for you interested in HUANGGONG MACHINERY GROUP'S pumps, follow is brief introduction of this product, welcome to contact us for any other technical information or latest price. China Huanggong Machinery Group Co., Ltd. ---------Specialist in marine pump industry for over 40 years. ----------We are China first designer and manufacturer of Hydraulic submerged cargo pump system A. Using range Use as cargo pump for Product Oil tanker, chemical tanker, FPSO etc. B. Features Hydraulic deep well cargo pump system consists of hydraulic power unit, deep well pump, ballast pump, portable pump and control system components. The hydraulic power unit, installed in engine room, provides hydraulic power to all pumps on board and has system overload protection. All kinds of pumps of the hydraulic deep well cargo system operation site without electrical equipment, will definitely not generate static electricity and sparks, therefore, it's absolutely safe and reliable while transporting flammable and explosive chemical media. C. General Hydraulic Deep Well Cargo Pump System YQB consists of Hydraulic Station, Deep Well pump and Control Device. Hydraulic Station, installed in engine room, provides hydraulic power to all of the cargo pumps in vessel. Deep Well Pump(one pump per tank), built on deck, is submerged to the bottom of the cargo tank and is driven by hydraulic motor. Control Device, installed in the Console room, controls the output flow of Deep Well Cargo Pump and monitors the running of the system. The capacity of the pump can be controlled not only by Remote Control in Console room but also by manual Control on the deck. The system is produced in accordance with RULES FOR THE CONSTRUCTION AND EQUIPMENT OF SHIPS CARRYING DANGEROUS CHEMICALS IN BULK China's Standard of Ship design. D. Features Huang Gong's hydraulic deep well pump has been widely used in over 200 oil and chemical tankers which is considered as the leading manufactuer of hydraulic deep well cargo pump in China domestic. E. Class Society certificate CCS type approval. Production certificate: CCS, RMRS, ABS, BV, RINA etc.
*The depth of the feed, the real-time battery power digital display, the operator is clear at a glance *Dual control system, both electronic feed and mechanical operation feed *Electronic feed, the feed precision is adjustable, realize the dual purpose of primary grinding and precise grinding *Preset the warning feed depth for grinding to prevent excessive grinding and cause grinding accidents *Super endurance capability, can work continuously for 1 hour *The whole machine is waterproof and can be used below minus 30 Specification Model LJ-LGF2001 Type Electric Rail Grinding Machine Material Aluminium Operating speed 4500r/min Rated power 5Kw (brushless DC motor) Grinding wheel feed accuracy 0.1 mm Grinding wheel size 150*55*75x4-M8 mm (outer diameter inner diameter thickness) Maximum tilt range of the grinding wheel 90 ° in one direction Operating temperature requirements -30 to 45 Grinding wheel type resin thick-walled cup-shaped grinding wheel Battery pack capacity 21Ah Rated voltage of battery pack 72V Weight 70Kg Profiling function realize profiling grinding of the outer edge contour of different types of rails Endurance capability(one charge) thermit welding grind around 8 welds; laser welding grind around 10 welds Grinding wheel feeding mode Dual control system, which can feed both mechanically and electronically Electronic feed It is divided into three gears for key switching and operation. First gear: fine grinding, unit feed 0.1mm Second gear: initial grinding, unit feed 0.3m Third gear: initial grinding, unit feed 0.5mm
DDS5558 Single Phase Meter is a kind of new style single phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has minimum size, and also a new single phase two wire active energy meter. It has already passed the test of the international authority CE. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has white backlight source eight digits LCD monitors shows the active energy power consumption. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. Features: Bi-directional total active energy measurement 25mm standard DIN rail installation, complying with standard DIN En50022. Single pole width (Modules17.5mm), complying with standard DIN43880. Small modular size, DIN rail mounted. Easy installation to distribution boards, load center, miniature & etc. by identifying where energy is being used. Application: All power parameter measurements; Energy measurement and electrical fire monitor and control; Replacing the three-phase power meter, three-phase electricity transmitter; Transformers, generators, capacitors, and electric motors distributed detection; Medium and low-pressure systems; SCADA, EMS, DCS integrators.
Plasma cutting machines are used for iron/steel plate cutting, if you have big size metal to cut, the portable and table type are all not suitable. You need choose gantry type plasma cutting machines, but it price is very high. So we design this kind plasma cutting machines that can cut big size iron/steel plate with good price. Features of plasma cutting machines: 1 .The machine is all welded as seamless steel structure. Steady structure and long life time 2. High configuration, high cutting speed and precision. 3., Auto ARC starting. Steady performance. 4, Control system: STARFIRE control, with USB interface 5. Cutting material: steel, copper, iron, aluminum, galvanized sheet, titanium plates, and so on. 6. File format: G-code 7, Suitable Software: CAD, ART CUT, Type, Art CAM etc Parameters of plasma cutting machines Working Voltage 3-Phase 380V/2-phrase 220V Working Area(X*Y) 2000*3000mm, 2000*4000mm, 2000*5000mm, 2000*6000mm Machine Structure Welded X Y Guide Rail Taiwan HIWIN Square Rail X Y Transmission Imported Rack gears Drive Mode Stepper Motor (Optional Servo ) Control System STARFIRE Max thickness 30mm Plasma Generator 63A/100A /120A/160A/200A Cutting Speed 0-10000mm/min G.W. 1500KGS
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 2000 mm; Maximum length of two centers: 2000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2570 kg; Machine overall size: 3668x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2220 kg; Machine overall size: 3168x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96 (37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2070 kg; Machine overall size: 2668x1000x1267 mm;
RB 1530 portable CNC plasma flame cutting machine has two working modes: plasma cutting, and (flame) gas cutting. Usually plasma cutting machines are used for thickness less than 30mm metal cutting. The gas (flame) cutting machines are used for thickness 30-200mm iron/ steel cutting. Portable CNC plasma flame cutting machine features 1. Two cutting modes optional: plasma cutting and gas (flame) cutting. 2. This CNC plasma cutting machine moves by high precision gear and rack ,accurate running in high speed. 3. The operation is simple, fast, easy to learn the programming software. 4. Small cutting loss and typesetting software high material utilization. 5. Read U disk files through USB directly, convenient site operation. 6. The machine also has feature that automatic arc voltage torch height control, it can adjust cutting distance automatically. 7. It is easy to move, suitable for the site indoor or outdoor 8. Can automatically memorize and restore when power is off. Portable CNC plasma flame cutting machine parameters: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Cutting Size 1500mm*3000mm Plasma Cutting Thickness 0-30mm,According to different power source Gas(flame) cutting Thickness 1-200mm Weight 230KGS Control System STARFIRE(FANGLING optional) Driving System LEADSHINE stepper motor Transmission Method Gear transmission Power Supplier HUAYUAN power or US HYPERTHERM Guide Rail Round rails Nesting Software FASTCAM
Shield slurry pumps generally use our G-type gravel pumps. The particles in the slurry processed by the gravel pump have larger diameters. When selecting a gravel pump, you should ensure that the particle size requirements that the gravel pump can pass. The gravel pump can adjust the nut to adjust the impeller clearance, reduce loopholes, improve efficiency, and facilitate the disassembly and assembly of the impeller. The current-passing parts are made of high-chromium alloy, which has high hardness, high strength and longer service life than cast iron. A spare blade is used on the back of the impeller to reduce the pressure on the back, reduce the axial force, prevent some debris from entering the seal, and protect the seal from wear. Gravel pump maintenance methods. In order to reduce slurry leakage, the tightness of the packing must be adjusted at any time; the bearing water pressure and water volume must be met according to regulations. Replace bearings promptly. When replacing bearings, make sure they are clean. Ensure the temperature is appropriate during normal operation. Make sure the elastic pads in the coupling are installed correctly. Make sure the direction of rotation of the motor and pump is correct. Make sure the gravel pump assembly and piping system are installed correctly and securely. Pay attention to the degree of wear of flow parts and maintain and replace them in time. If you want to know more about slurry pumps, please feel free to call us! Shijiazhuang Pansto Pump Industry is a manufacturer of slurry pumps in Shijiazhuang. It mainly designs, manufactures and sells slurry pumps and accessories. Mainly engaged in mud pumps, submersible pumps, foam pumps, desulfurization pumps and many other series. Single-stage slurry pump, slurry pump diagram, slurry pump curve, slurry pump specifications Slurry pump brand Warman slurry pump ZJ slurry pump ZGB slurry pump AH slurry pump SP slurry pump vertical liquid slurry pump
Complete Automatic Aluminum Foil Container Making Machine Line Model: SEAC-63A-4 : Max. Mould Lenght 1150mm Units: Automatic Feeder+Automatic 63Ton Press+Cavities Mould+Auto Stacker+Scrap Sucker& Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: Aluminum foil; Thickness: 0.030mm~0.250mm; Alloy: 8011, 8006, 3003, 3005 etc.; 2. Japan Inverter, PLC and 10inch touch screen control system; 3. Max. Width of Aluminum foil: 880mm; 4. Max. Diameter of Aluminum foil: 1000mm; 5. Core diameter of Aluminum foil: 76/152mm; 6. Working speed: 40-75 times/min; 7. Total Power: 11kw+2kw+2kw+1kw; 4Motor 8. Compressed air needed: 0.5- 0.8 Mpa, 0.2m3/min; 9. Install dimension: 7100*2600*3500mm; Technical Data: Max. Mould Size: 1100*900*450mm; Slide block stroke: 180-260mm; Slide block dimension: 380*145mm; Automatic mould height adjust unit: 0.5kw; Work plate dimension: 1100*200*300mm, separated two sets with Balls; Tension: complete automatic adjust; Feeding System: Servo Motor, higher precision and more power; Auto Stacker: SMC lift for stacking system, top quality; Power: 4P, 380V or 220V, 50Hz /60Hz; Net weight: 9,500kg.
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 500x630 mm; Maximum cutting thickness/ Maximum height of the part: 600 mm; Maximum Work piece weight: 700 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 600x860x600 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 150 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150; Approx. Machine size (LxWxH): 2000x1950x1750 mm; Approx. Machine weight: 2540 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 ;
Product Descriptions: This full-automatic quantitative vacuum sausage stuffer is filled by vane pump, driven by servo motor, operated by human-machine interface, and equipped with twisting and kinking structure, and its automatic motions are controlled by micro-computer. This machine is able to fill casing products like sausage, ham sausage, ham and etc. and to quantitative twist and kink those products which are wrapped by natural casings, collagen casings and fibrous casings. As well, this machine can fill boxed, bottled or canned product. The automatic blade compensation device in the machine can achieve the quantitative accuracy to �±3mm, and deliver material delicately. And the speed of filling, twisting and kinking, the number of twisting, weight of every segment can be adjusted. The filling process of this machine is under vacuum environment. The hopper could be flipped, which is easier to wash and clean. This machine is manufactured of stainless steel, and essential parts are treated specially, thus they are hard-wearing. And the controlling parts are imported; appearance is treated by advanced surface treatment technology. Those advantages make the machine reasonable structured, convenient to operate, easy to maintain. And at the end, with not mentioned security devices, this is an ideal equipment for meat processing industry. Main Features: 1. Simple structure in linear type ,easy in installation and maintenance. 2. Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 3. High pressure double crank to control the die opening and closing. 4. Running in a high automatization and intellectualization,no pollution 5. Apply a linker to connect with the air conveyor ,which can directly online with other machine Technical Specification: Model BG-6000 Power 8kw, 380v/50hz/3 phases Filling Capacity 6000kg/h (100r/min) Quantitative accuracy �±2g Hopper volume 200L Kink speed 0-500times/min Quantitative Range 6~9999g Center height 980~1030mm(adjustable) Maximum vacuum degree -0.1Mpa Machine Weight 550kg Dimensions 1980x1125x1780mm
Silica Sand is a naturally occurring hard granular material made up of quartz grains. It is also known as Quartz Mineral and is very essential commodity in numerous industries. It is made up of Crystalline Mineral from Oxygen and Silicon Atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of Quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the Silica Sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes Silica Gel, High Purity Silica, Fumed and Fused Silica, Precipitated Silica, Etc. Silica Sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in Construction, Glass and Ceramic, Paints, Plastics Industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica Sandman easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
Silica Sand is a naturally occurring hard granular material made up of quartz grains. It is also known as Quartz Mineral and is very essential commodity in numerous industries. It is made up of Crystalline Mineral from Oxygen and Silicon Atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of Quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the Silica Sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes Silica Gel, High Purity Silica, Fumed and Fused Silica, Precipitated Silica, Etc. Silica Sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in Construction, Glass and Ceramic, Paints, Plastics Industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica Sandman easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
Product Description MOTOR SyncDrive Core, 50Nm, Powered by Yamaha CONTROLLER RideControl Dash, full color LCD screen DISPLAY RideControl Dash, full color LCD screen BATTERY EnergyPak 400Wh FRAME ALUXX Aluminum, Overdrive 1�½ - 1â??" head tube, integrated KS18 kickstand mount FORK SR Suntour XCM ATB Coil 29" 100mm travel, Tapered 1�½ - 1â??" steerer SHOCK - HANDLEBAR Giant Connect TR Riser 31.8x690~750mm GRIPS Giant Sole-O Grip STEM Giant Contact SEATPOST Giant 30.9mm, 2-bolt Micro Adjustable, Forged Aluminium SADDLE Giant Sport PEDALS Aluminum Platform SHIFTERS Shimano Altus FRONT DERAILLEUR - REAR DERAILLEUR Shimano Alivio, 9-speed BRAKES Tektro HD-M275, hydraulic disc, 160/180mm BRAKE LEVERS Tektro HD-M275 CASSETTE Shimano CS-HG200, 11-36T, 9-speed CHAIN KMC e.9 Sport, e-bike optimized CRANKSET FSA Comet E-Bike crank arm set FSA MegaTooth Direct-mount 1X steel 36T BOTTOM BRACKET N/A RIMS Giant GX03V HUBS Giant eTracker Sport, [F] 9mm QR [R] 135mm QR SPOKES Stainless steel TIRES Maxxis Rekon 29x2.4" Wire Bead 60TPI LIGHTING - CARRIER -
Plastic Pelletizing Machine The plastic pelletizing machine also known as plastic granulator, is mainly used for processing industrial and agricultural waste plastics. With special screw design and different configurations, plastic pelletizing machine models include single-screw plastic granulator, conical twin-screw plastic granulators, parallel twin-screw granulators. The plastic pelletizing machine is suitable for most common waste plastics range from PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA and other plastic regeneration and color mixing granulation. Recycled pellets can be reused again to make new plastic products. As the most widely used and most popular plastic recycling machine in the waste plastic recycling industry, granule-making machines can both create significant economic benefits and optimize resource allocation to protect the environment. Composition of plastic pelletizing equipment The main engine of the plastic granulator is an extruder, which consists of an extrusion system, a transmission system and a heating and cooling system. The auxiliary machines of the plastic pelletizing machine unit mainly include pay-off device, straightening device, preheating device, cooling device, traction device, meter counter, spark tester, and wire take-up device. The main sections of whole plastic pelletizing equipment involve Belt conveyor with metal detector/Force feeder/Compactor/Main extruder with degassing/Second extruder/Hydraulic screen changer/Die face cutting system/Water cooling tank/Dewatering machine/Vibrator screen/Packaing system. The extrusion system includes a hopper and a die, and the plastic is plasticized into a uniform melt through the extrusion system. The transmission system is used to drive the screw. The torque and speed required for the screw supply during the extrusion process generally consists of a motor, a reducer and a bearing. Heating and cooling systm is necessary conditions for the plastic extrusion process to proceed. The heating device heats the plastic in the cylinder externally to heat it up to the temperature required for the process operation. The cooling device is set up to ensure that the plastic is in the temperature range required by the process
Place of Origin: China Classification: Laboratory Centrifuge Brand Name:OEM Model Number: V-GTM12 Max. Speed: 12000rpm Max. RCF:15800xg Max. Capacity:24pcs Capillary*75mm Time Range: 0~99min59s RPM/RCF Convert:Yes Noise (dB)â?¤ 55 Temperature Normal Acc/Dec:10 Kinds Speed Accuracy: �±20r/min Voltage(V/Hz):AC 220V/110V 50HZ/60HZ High speed micro 24capillary hematocrit blood separation lab centrifuge Micro Hematocrit Centrifuge 1.Frame is 3 tiers protection steel jacket, and with the stainless steel chamber, inside protective steel lagging which is simple-compact,light-weight and low noise. 2.Adopt advanced CPU control system realizing microprocessor control, it can control rotate speed, and relative RCF, LCD display which indicates the current speed, time and RCF. 3. Brushless inverter motor with simpler construction,more reliable performance,longer life and quietly running. 4.With many kinds of rotor for your choice. 5.Over speed and imbalance protection, the centrifuge will stop automatically when the above situation happened, with short spin function. 6.Emergency locks under the bottom of the centrifuge which help you open the lid when power off. 7. It is consistent with CE security certification and ISO9001 quality certification. Company Profile
Silica sand is a naturally occurring hard granular material made up of quartz grains. It is also known as quartz mineral and is very essential commodity in numerous industries. It is made up of crystalline mineral from oxygen and silicon atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the silica sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes silica gel, high purity silica, fumed and fused silica, precipitated silica, etc. Silica sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in construction, glass and ceramic, paints, plastics industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica sand can easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
Silica sand is a naturally occurring hard granular material made up of quartz grains. It is also known as quartz mineral and is very essential commodity in numerous industries. It is made up of crystalline mineral from oxygen and silicon atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the silica sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes silica gel, high purity silica, fumed and fused silica, precipitated silica, etc. Silica sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in construction, glass and ceramic, paints, plastics industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica sand can easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
