Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPIs laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Lenoil refrigeration fluids are a unique blend of synthetic and semisynthetic basestocks, designed to give optimum performance in a variety of refrigeration systems. In addition to their outstanding stability with R-12 and R-22, the Lenoil fluids also contain a high degree of compatibility with these refrigerants, making them suitable for use at low temperatures where conventional mineral oil-based products often fail. Applications and Compressor Type R12 CFC Systems R22 HCFC Refrigeration R717 Ammonia Refrigeration Features and Benefits Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up"
CPI-4628-68 is formulated with high quality synthetic polyalphaolefi n (PAO) basestock, combined with our patented seal swell technology. This lubricant features enhanced oxidation stability and a low pour point, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. Our patented seal swell technology minimized ammonia leaks due to poor elastomer performance. CPI-4628-68 is particularly suited for use in ammonia compressors with evaporator temps below -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia leaks Mineral oil compatible Easier change-over Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Very low pour point Reduced efficiency loss and easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 59.1 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 131 Density, g/mL, 20 C ASTM D4052 0.84 Pour Point ( C) ASTM D97 -54 Flash Point, C.O.C., ( C) ASTM D92 266 Fire Point, C.O.C., ( C) ASTM D92 282
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "
"The CPI-1005 Series compressor lubricants are formulated using highly hydrocracked and is dewaxed mineral oil coupled with an additive package that is specifically designed to give superior performance in compressor systems. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, low pour point, and excellent shear stability ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1005 Series lubricants are especially advantageous in compressors operating with harsh chemical environments, particularly with sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Reciprocating compressors Sour gas applications Applications with harsh chemical environments Features and Benefits Corrosion protection (H2S) Resistance against H2S corrosion Low pour point Suitable for use in low temperature environments Excellent lubricity Increased efficiency, reduced cost of operation Shear stability Increased service life "
Digital oil flowmeter suitable for the lubrication oil flow meter guns and suitable for metering the engine oil,motor oil,freeze oil,hydraulic oil and all kinds of lubrication oil...
Electric oil pump. Techniques: Electric pump: 380VAC FLowrate: 10-20L/min Trolley: Can undertake 180-220kg Digital flowmeter gun can read liters. Hose reels: 10meters oil hose reel can delivery oil to a long place. Firstly put the oil drum 180-220kg on the trolley then put the oil pump suction tube into the oil drum, when it's power on can withdraw the oil from the drum then via oil hose reel to dispenser to the filling point by the digtial oil flowmeter gun. You can read filling liters. When its meet your wanted liters then power off is ok. It's very convenience for working in the work shop and can moible to other place.
Slack Wax, minimally refined paraffinic wax obtained from the dewaxing process of base oil lubricants. It is used in a wide range of applications, including as a blending component in the production of paraffin waxes, as a waterproofing agent, and in the manufacture of candles, rust protective products, and board sizing.
Lubricating Oil Metal Activator TH-551 (Benzotriazole Derivatives) Cas: 82834-16-0 Metal deactivator TH-551 (benzotriazole derivative) TH-551 is a new achievement of our company in introducing new synthetic technology abroad. TH-551 is composed of Benzotriazole and alkyl mercaptan of macromolecule chain through complex oxidation coupling. It has the same performance as REOMENT-38, a similar product abroad. TH551 forms inert chelating protective film on metal surface by coordination bond, which reduces the potential point of metal surface and plays a catalytic role in passivating metal. The product also has good antioxidant properties. The product is stable in quality. It has synergistic antioxidant and synergistic effect with trace amount (0.03~1%) and T501. It is widely used in steam turbine oil, oil film bearing oil, industrial gear oil and circulating oil. But it can not be combined with ZDDP to prevent precipitation. Packaging, storage and transportation: The inspection and acceptance of packaging, marking, transportation, storage and transportation and delivery shall be carried out in accordance with SH0164. This product is non-flammable and explosive. Its toxicity and safety precautions are similar to those of other petroleum products. Product storage and transportation process should be strictly waterproof and mixed, strictly prohibit local overheating. Storage and use temperatures should not exceed 60 degrees Celsius. The storage period is generally three years, but more than half a year for expiration analysis. Main Quality Indicators: Appearance: Brown transparent liquid Density (20 degrees Celsius) Kg/m3:910-1040 Kinematic Viscosity (100 degrees Celsius) mm2/s: 10-14 Flash point (opening), Celsius: no less than 130 Base value (mgKOH/g): 210-230 Oxidation test (value added): no less than 90 Thermal decomposition temperature: qualified Packaging: 30L/barrel, 200L/barrel
Lubricating Oil Metal Activator TH-551 (Benzotriazole Derivatives) Cas: 82834-16-0 Metal deactivator TH-551 (benzotriazole derivative) TH-551 is a new achievement of our company in introducing new synthetic technology abroad. TH-551 is composed of Benzotriazole and alkyl mercaptan of macromolecule chain through complex oxidation coupling. It has the same performance as REOMENT-38, a similar product abroad. TH551 forms inert chelating protective film on metal surface by coordination bond, which reduces the potential point of metal surface and plays a catalytic role in passivating metal. The product also has good antioxidant properties. The product is stable in quality. It has synergistic antioxidant and synergistic effect with trace amount (0.03~1%) and T501. It is widely used in steam turbine oil, oil film bearing oil, industrial gear oil and circulating oil. But it can not be combined with ZDDP to prevent precipitation. Packaging, storage and transportation: The inspection and acceptance of packaging, marking, transportation, storage and transportation and delivery shall be carried out in accordance with SH0164. This product is non-flammable and explosive. Its toxicity and safety precautions are similar to those of other petroleum products. Product storage and transportation process should be strictly waterproof and mixed, strictly prohibit local overheating. Storage and use temperatures should not exceed 60 degrees Celsius. The storage period is generally three years, but more than half a year for expiration analysis. Main Quality Indicators: Appearance: Brown transparent liquid Density (20 degrees Celsius) Kg/m3:910-1040 Kinematic Viscosity (100 degrees Celsius) mm2/s: 10-14 Flash point (opening), Celsius: no less than 130 Base value (mgKOH/g): 210-230 Oxidation test (value added): no less than 90 Thermal decomposition temperature: qualified Packaging: 30L/barrel, 200L/barrel
**Fuel Your Business with EN590 Diesel from Azerbaijan!** Looking for high-quality EN590 diesel at a competitive price? Look no further! Gulf Ocean Oil brings you premium EN590 diesel straight from Azerbaijan, now available in Fujuriah, U.A.E. **Product Details:** - Grade: EN590 - Origin: Azerbaijan - Price: $525 per metric ton - Â Commission : $5 With Gulf Ocean Oil as your representative mandate, you can trust in our commitment to quality and reliability. Our EN590 diesel meets international standards, ensuring optimal performance for your business operations. Fuel your success with Gulf Ocean Oil - Your Trusted Partner in Energy Solutions!
One of the most well-known and sought-after byproducts of the refining process of vegetable (mostly sunflower) oil are fatty acids. Fatty acids, an industrial product with a GMP+ certification, are mostly used in the animal formula and feed sector. This is because adding fatty acids or fatty acid-based compounds to an animal feed ration can reduce feed costs. Fatty acids are crushed and processed through a whole cycle. In addition, they are utilized in the manufacturing of soap, glycerin, and stearin, as well as in the food processing industry as a direct formula component. Tocopherols.