Products in CM commercial series are universal for CFC/HCFC/HFC of high&low pressure refrigerants. With super power motor and high efficiency condenser, the recovery rate is very fast. Self purging valve facilitates your next service process for different refrigerant recovery. No worry about the cross contamination. Operation is very simple. Advantages l Performance has become a forefront of the industry; l Meet ARI-740 standards; l Universal for CFC/HCFC/HFC of high&low pressure refrigerants; l 24 hours continuous working; lNo need for special maintenance when recovery different refrigerants, just use self-purging function; l No cross contamination. Application l Transfer refrigerants on your job site; l Service chillers & other medium cooling systems; l Small & medium central A/C factories; l On site maintenance of small & medium HVAC/R products. Main features l Oil free lubricating compressor, compatible with CFC/HCFC/HFC refrigerants; l Self-purging design, prevent cross contamination; l Multi-function valve design, simple operation; l Perfect protection system, safe credibility; lThorough recovery refrigerant and automatic stop when the suction pressure is up to -0.04MPA; l Light weight, air cooled type only 160lbs, water cooled is much lighter.
PRODUCT DESCRIPTION Use: Coal injection, dust-fall, coal pressure reduction, coal-crack, methane drainage, etc. Function: 1. Moisture enters into coal mass, releasing some gas, and reducing the gas content in the coal body. 2. It can reduce the 80% dust, improve workers' working environment, and completely eradicate dust explosion accidents when water injection reaches the desired impact. 3. Wetting coal mass to prevent the spontaneous ignition of coal body. 4. High pressure water injection, breaking coal mass, reducing cost, and enhancing the workers feeling of safety. 5. Use the hole sealing device to efficiently prevent the gas stress and explosion. Structure: It is made of high pressure expansion hose, safety valve, and rapid-acting coupling. Techincal Parameter Hole-sealing diameter: 30~120mm(also can be processed according to customers' needs ) Working pressure: 1-8MP(processed according to the customers' needs) Start-up pressure of the safety valve: 0.4-0.5Mpa Working flow: 4-4.5 tons of water per hour Depth of hole-sealing: 1m-8m Expansion coefficient of the hose: 60%-100% Operation Method and Notes 1. It is very simple and convenient to use the device. It only needs to connect the device with the watercourse on the operation field, put the device into the drill hole under certain pressure, the hose will expand to come to purpose of hole sealing and coal breaking. 2. The device can be used for several times repeatedly. To unload pressure after water injection, it can restore to its original state, and then take out the hole device. 3. Forbiding to insert and retrieve the hole device with pressure. 4.Allow no person in front of the working device.
Current Transformer Ch40s-32mm Sleeve For Hydraulic Key Zq 203/100 Zq203-020 Fuse, Pn.e33-1008-020 4.04.04.004 Grease Nipple Az702156-010100-cooling Water Inlet/return Pipes Three X One-way Valve 2.4.56.010 Rotary Combination Seal Https://www.amlppmfg.com/reverse-rotation-pump-head-sb6x8fjp-sb68fjp0002.html Meter Lanp Pl-18vr 11001567157 Oil Return Hose 10 Meters Zq203-100 Centrifugal Pump Hsr 8 X 6 X 14 Anti-friction Sleeve Oiler M10x1 Kg80-23 Low Voltage Ac Drive 3p 380-480v,55kw,125a Acs510-01-125a-4 Abb 9m-2342 Primary Fuel Filter Yhv55-hp0 Stainless Steel High Speed Dome Camera Lm2000 The Power Supplies Will Be Powering The Display. Stone Ah100101200300 Air Control Valve 8810612-00-0010 For Air System Of Zj-20 Bolt 50103-16-c Nov Tds-10sh Top Drive Air Clutch Coupling Lt500/250t Draw Works Jc50db Harting 9330242716 Electric Hoist With A Capacity Of 3.2 T P=6m Explosion Proof Signalling Hooter Mhp11 For Zone 1+2 Bridge Racker Length Transmitter Art.3520220 207501+71 Seal Cup 180x220x18 620502-60-5510 For Sl160 Swivel Emerson Dc Power Monitoring Module Psm-e01 Pldp-a Portable Deg Fuel Filter Fleetguardfs 19605 Gh3101-05.04liner Locking Ring 55027766 Cab Filter Internal Fine Finish 12" Inflate Tube For Seal O Grip P1280t Stuffing Box Cover For Mechanical Seal Of Centrifugal Pump Make-spd Mud Hog Mission 22223-01-30a/052136410 O-ring 51300-279-b Apc Smart-ups Srt Srt192bp Gripper Die R02-1000-010 Butterfly Valve 2 Lug Type Ne-1 221285000000 Gh3101-21seal Pad Self- Centering Bearing 22230/w33 C3 For Mud Pump 3nb-1600f O- Ring S01-1385-01n Kit, Repair, Grppr Cyl, Buw, Pn. M23-1004-010 Overload Protector Klm 2-bnc/220v 500a Gh3101-06.02 Pipe Joint Air Filter 1300016573 Insider Retainergh3101-02.04 Bushing 4 102 Mm 45292e Vibrating Screen Box Derrick-2000 60 Mesh Hdf-2 Gorounding Falut Detection Pc13 Shank Gland 6773311 Drilling Coupling Xt-57 Box X 4-1/2 If Pin: Length 12 Fcsov224zetbr24 Stem H7ub.237p Hydraulic Tong Xyq12a For Xj-450 Oil Seal Gh3161-03.11/3nb-1600hl 57821324 Compressor Oil Filter 4m3 5127043006-handle Reversing Valve 2-ha-2z Thread Ring 551-105-03 Ring Laminated 65.98701-0005 Solenoid Valve 29536722 Piston Rod Nb800g.05.21/3nb-800f Stem Back-up Ring 2 Reqd 919218b Tertiary Air Temperature Sbwzp-2480 K 0~1100 Liquid Crystal Display Gh3101-01.03 Shim Set Light, Led, Emergency, Ex-proof, 100-277v Ac, 56 W, 1200mm Lg, Cool White, 3960 Luminous Flux, 70 Cri, Sordfish Series, P/n: Ex-ksf561200h7v7ch-on-e Ingersoll Rand Air Starter Complete Assy Ss825gc03r31 Screw 01.01-41m Jiangsu Rushi Canrig Washpipe Assy 4.00 Bore 7.5 Ksi Ay10147 340702061100000000-projectual Light Cbb-60hgf1 Air Tube Clatch Lt500/125 T14-002.00 Thermo Relay 3ua5940-2 E Contactor Af30-30-00-11,24-60v50/60hz 20-60vdc 1sbl277001r1100 Abb Tacho, Doosan, 65.27103-7002 D
M/D TOTCOMD FLUID,INSTRUMENT QUART"RED",C/W MSDS W15 10136015-001 hydraulic release collar Y15160-10 FILTER AIR-MFG: KUB IG65911222 Seal ring 3NB-1300F O-ring 345X7 GB3452.1-82 SYNCHRONIZER WOODWARD LOAD SHARE UNIT SP 8440-1706 Solenoid Valve fly ash control CAMOZZI 334-015-02; including signal terminals; NSX: CAMOZZ Bearing SKF 23148CC/C3W33 Radial ring A110X7.5-F11UQB7401.1-94 VLV HYD DIR 3 POS 4 WAY 24V D03 H10059 Plug LGF3101-05.05.00G Loadmaster Bridge Racker 2 CH IS DIGITAL INPUT MODULE NAMUR WAGD 750-438 NOV 10064178-042 / P250000-9684-06 Bushing 29531004 Connection pnevmoklapana 01.08.10-1 Sealing gasket R39 NB800G.27.01/3NB-800F Valve Outer Spring 2815780703082 leaf spring 0101-23M HANDLE 10 POSITION SANITARY 2" TO 4" 22319003 Lock screw for hydraulic key ZQ 203/100 ZQ203-024 Bellows 235.09.30 FSYT-8 fully sealed integrated high-definition camera T002-200.00-Crown block saver Bearing assembly 23046228 NSX100F TM100D-3 POLE CIRCUIT BREAKERS Closed tong assembly for JC32D disc brake PZ400100B 1400035677, Red Audio &Visual Alarm Light, Warom Pn : BBJ81-R;Atex/Iecex; 220v;50hz For Gas System PINION,18T,PN.DT14521 Weatherproof Strobe Light BLE 15 O-ring 568-032 FLO 90DR402848 GH3101-04.04Stuffing box Gasket EXhaust 2815780716079 YHV62-HP0 stainless steel high speed dome camera OIL SEAL: 8.5" X 10.5" X 0.625"GH3101-03.11 tilted plate 56.600-04 TQ340-35Y Fuse RT18-32/1A P/N:0201-1102-0022-00 Ring 7602-1600-25 Lanshou LS Ring H7UB.243P 06.56342-1208 Thermostat sealing ring 104204 K-SYSTEM KFD2-CD-EX132 -104204 MAKE-INPUT-0-20mA AUSGANG/OUTPUT-0-20Ma Bearing 352936E for Crownblock TC158 5X4 180-7487 cabin filter Dies for preventer 2PPG350 X 35; 245mm pipes Retarder gasket 29546244 Control crane Rexroth HD-2-FX (R431002825) GH3101-04.16Crosshead Pin Cap 9755 RING,RTNG,INTERNAL,0.938"ID SHAFT JUMO Dial thermometer 608201/2572-814-17-1000-752-6-000-26-00-0/410.522-VARTN: 60/82001527-F-NR: 016326500101145-Teile-Nr.U-92995 LOCK WASHER OB BEARING 648402105 6124-4 Casing line stabilizer PSQ 011.00 SEAL KIT DISC BRAKE M16-1000-02B UPPER SEAT O-RING 919245 Oil filter 1300108717 Oil reflector 43160 https://www.amlppmfg.com/coupling-atd330h-5402650177-for-main-drum-zj30.html Ingersoll-Rand Compressor Air Filter Seal Cup 170 X 200 X 15 620502-00-1050 for SL 160 Swivel SEAL KIT, DISC BRAKE, PN.M16-1000-02B VITON SEAL RING 5" FIG 1002 3232387 3934 PIN,TORQUE,BUSHING LOCK 1/8" NPT GREASE FITTING 53201 ZPEC ZM107.03.35..03 WEAR PLATE Oil filter ISV40-160x100M Control valve HD-2-X (P50973-0003) 210X240X15 2.4.99.03.015 Inner skeleton oil seal sleeve holder 650 412905 Fuse 170M1566 690/700V 80A 200KA Pressure sensor 29506484 GH3101-29.00Spare parts delivered with Flange gear (lower) for hydraulic wrench ZQ 203/100 ZQ203-179 GASKET,PN.DT30623
SEAL KIT, PN.H18-6025-01A TRANDUCER,IP,CONV,FAIRCHILD,TDE17800-416 SHIFT YOKE AF50002.01.03.12 LYNCH PIN 30157306 Tong HT-65 p/n 200540 Seal H2537-24A Halco-2500 QC010014 bearing 6211 SB68FJ-61.1.1 IMPELLER 45KW X01175002 SAND PUMP SB6X8FJ motor JM12-F0.8F2-H Ram face seal 5" 2C02.01G.02 10010PB-7997 FILTER 57204158 GH3101-27.07Connector :NPT1/4 Filtru liniar 667700 ReXroth R928006485 2.0045 H10XL-A00-0-M 119-3355/107-0266 cabin air filters O-RING 470X8.6 AG3750011102 Elbow,eXhaust manifold Part No.: 235.09.70X Seal Kit 314056 R900314056 Hydraulic filter for hydraulic tong ZQ203-100 ZU-H250*20BD-CR YHW125-3 explosion-proof integrated universal camera Jaw 85786-2 DIGITAL LOAD SHARING SPEED CONTROLLER Brake band 45288 Weighing Display Instrument PLAC-5105L-A-F Round dies for metric thread GOST 9740-71: M48 TUBE,LUBE/HE,ASSY,TDS11 118409-500 TZJ30 brake shoe STEM CUP ITEM 24 J015855 Sleeve for hydraulic key TQ340/35YA TQ340-164 Slips rod seal 6011310069 Slip Body 3-1/2"-4-1/2" 65623 Spider SEAL GASKETGH3101-03.06 HARTING 9210253101 O-ring QB7494-2010 for SBW 2D3.5 SHIFTING SEAT AF50001-01.04.16 Tee for connecting pipes 2A16770 QWS-2500SD pump 57415600 fuel filter 57829670 Safety cartridge ZN310 TURBINE BLADE DALIAN:ZN310LSA4 Plunger pump belt 1403000990 RXLG400W20RJJ RESISTOR EAGTOP PISTON,DOOSAN,65.02501-0708 Tooth board 24.100-03 Bearing HHZJ40000168 Seal 30Ã??50Ã??9.5, PFF52-70-08 Oil filter 250025-526 GH3101-07.00substructure GH3161-22.01.00ASeat, pressure gauge SC40 Analogue PTZ Camera Station GH3101-15.03elbow:NPT 1/2 Foot Valve IA100 870902-00-0100 for Air system of Carrier X D-60ZJ-20 Flow Switch DKM-1/8,G1 SPRAYING PIPE ASSEMBLYGH3101-05.23.00 GH3101-08.06Connector : 1-11 1/2NPSC ( 1 1/4-12UNF-2A) Handle ZQ203-036 Filter HJC 22.01.04.00 RFA-100*100LY-T-CR filter element 2.4.03.001 Cable Mounting plate 30170057-500 harting 9330000000 Â HAN6E-BU-S(6) 3222188151 AIR FILTER Solenoid valve SS-G01-A3X-R-C2-31 YUKEN Friction clutch pressure plate ATD 324 HC SHORT CONNECTOR: NPT1-1-11 1/2NPSCGH3101-08.04 Shaft Seal FM30.61-09 Cable rail 29549572 harting connector 19300161522 Screw M20X1,5 120mm 1407169 Two positions 3-stage Spool Valve VSP-3301-31 for Hydraulic System of ZJ-20 diaphragm 1.625" 350 E039350 Weatherproof Signalling Bell AWS Gauge Fitting Assembly ZQ203-100 MINOR REPAIR KIT J02509101421 EATON/COOPER CEB12236 Arbor for taper X milling cutters "Incremental Optical Encoder Model: HS35F-100-R2-SS-1024-ABZC-5V/V-SM18-EX Part No.: 01075-111 Make: BEI Technologies Inc, USA" NSX160F MA150-3 POLE CIRCUIT BREAKERS
rod 1.The applications of 22 meters crawler rotary pile drilling rig with square power rod The crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The features of 22 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameter of 22 meters crawler rotary pile drilling rig with square power rod The 22 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 22 meters depth of rotary drill pile, and can select drilling tools with different specifications. The maximum diameter of pile hole can reach 1500mm. Item Unit Parameters XWDF-22 crawler rotary pile drilling rig with square power rod Working mode / cylinder pressure wire rope Gravity pressure Open hole diameter mm 500-1500 Drilling depth m 22 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 16 Maximum power head torque kn.m 26000 Power head rotating speed r/min 20-40 Rotation angle of turntable full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in weifang Engine power kw 145 (In the continuous improvement of products, technical parameters are based on practical consultation.)
1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm. Item Unit Parameters XWDF-15 crawler rotary pile drilling rig with square power rod Working mode cylinder pressure wire rope deadweight Drilling hole diameter mm 500-1500 Drilling hole depth m 15 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 13 Maximum torque of power head kn.m 26000 Power head rotating speed r/min 20-40 Turntable rotation angle Full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in Weifang Engine power kw 145 (In the continuous improvement of products, technical parameters are based on practical consultation.)
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:http://www.xinchengcanmaking.com, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:http://www.xinchengcanmaking.com, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
GK35 Heavy Duty Bag Closing Machine: Class GK35 sewing head is special designed for closing bags filled with flour, grain, fertilizer, feed, chemicals, seed, coffee, sugar, salt, dog food, minerals, and hundreds of other products. Working with a column and belt conveyor, it can accomplish packing operation efficiently. Model GK35-2C(Similar to 80800C): Single needle, two threads Start-stop: actuated by foot switch of column Thread chain cutter: by continuously driven nibbler knives Standard needle: 80800x 200~250# Stitch length: adjustable from 6.5-11 mm, standard setting 8 mm Speed: up to 2000 RPM, depending on sewing material and operation 500*500*325mm, 35Kg, Carton package; As our standard bag closers do not include any electric components, they can be installed in ex-proof locations. Model GK35-6A(Similar to 80800R): Single needle, two threads Start-stop: automatically by photoswitch Thread chain cutter: automatically by air cylinder operated guillotine cutter Stitch length: adjustable from 6.5-11 mm, standard setting 8 mm Standard needle: 80800 x 200-250# Speed: up to 2000 RPM, depending on sewing material and operation Tape folder: adjustable for 50-70 mm wide tape (selected or not) 500*500*325mm, 36Kg, Carton package; Model GK35-6B The same with GK35-6 expect that equipped with jump-out scissor, which can automatically cut up threads only. Model GK35-8 Double needles, four threads Start-stop: actuated by foot switch of column Thread chain cutter: by continuously driven nibbler knives Standard needle: 80800x 200-250# Stitch length: adjustable from 6.5-11 mm, standard setting 8 mm Needle distance: 6 mm, staggered Speed: up to 2000 RPM, depending on sewing material and operation 500*500*325mm, 36Kg, Carton package; As our standard bag closers do not include any electric components, they can be installed in ex-proof locations. Model GK35-8A Double needles, four threads Start-stop: automatically by photoswitch Thread chain cutter: automatically by air cylinder operated guillotine cutter Stitch length: adjustable from 6.5-11 mm, standard setting 8 mm Standard needle: 80800 x 200-250# Speed: up to 2000 RPM, depending on sewing material and operation Tape folder: adjustable for 50-70 mm wide tape (selected or not) 500*500*325mm, 37Kg, Carton package;
Product Introduction: We can provide PFA isotope ion exchange columns of different capacities, diameters and lengths. This product is cast with PFA as the material, and the design combines the characteristics of a variety of capillaries and storage containers to meet your needs. The size can be customized according to your experimental requirements. The threaded port design allows users to choose a cap to protect the integrity of the liquid sample in the chromatography. Product Features 1. Repeatability: PFA column tubes can be used multiple times, and the material background is low, which greatly saves experimental costs 2. Visibility: When separating color samples with color, the PFA transparent column can visually see the separation color band 3. Sieve plate: Sieve plates of various particle sizes can be provided, with excellent distribution effect to achieve better separation 4. Large sample loading capacity: can be customized according to your experiment 5. One-time molding, no welding gaps, smooth liquid flow, ensuring durability 6. To prevent the sieve plate from falling off, the bottom can be sharpened according to the flow rate requirements PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, ion exchange columns, crucibles, valves, joints, delivery pipes and other products.
In life science research, liquid nitrogen is a commonly used freezing medium, and the container that stores it has become an important experimental tool. During the experiment, in order to stabilize the low-temperature storage environment of the sample, regular replenishment is required to ensure adequate supply. Because liquid nitrogen is volatile, the amount of liquid nitrogen decreases over time. Therefore, self-pressurizing liquid nitrogen tanks designed for liquid nitrogen supply are widely used and are very popular in scientific research institutions, laboratories, health industries and other places. What is a self-pressurizing liquid nitrogen tank? Answer: It is a liquid nitrogen supply equipment. It can also be called a pressurized liquid nitrogen tank! Its principle of supplying liquid nitrogen is very simple, which is to use the evaporation of liquid nitrogen to generate pressure to realize the discharge of liquid nitrogen. There is a valve on the top of its tank that controls the pressure increase. Only when a certain pressure is reached can the liquid discharge be realized. So, when the pressure reaches what level, can this function be realized? When the pressure reaches 0.02MPa-
1. Product parameters Product name: PFA triangular funnel Material: PFA Size: �?40/150mm Temperature resistance: -200-260â?? 2. Features: 1. Excellent corrosion resistance: PFA material has excellent corrosion resistance and can withstand corrosion from various acids, alkalis, organic solvents and other chemicals, ensuring the safety and reliability of experimental operations. 2. Low surface energy: The low surface of the PFA material allows the liquid to flow more easily, reducing the adhesion of droplets and effectively avoiding the problems of sample loss and cross-contamination. 3. Flexible and diverse sizes and shapes: PFA triangular funnels can be customized in different sizes and shapes according to experimental needs, and are suitable for various experimental operations and sample processing. 3. Application: PFA triangular funnels are widely used in laboratory pipetting operations, which can realize the addition, separation and transfer of liquids and improve experimental efficiency and accuracy. It can be used in semiconductor, new materials, new energy, biopharmaceutical, petrochemical and other industries. 4. Our PFA series products: Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
Cooling Tower Pump Cooling tower water circulation pumps are critical to the chiller system they serve. Your chilled water system may even have more than one type of chilled water pump, with one main pump circulating water through the chiller and another main pump circulating water through the building. All chilled water or condensate pumps should have good seals, bearings, rotating parts and drive motors. Both circuits have controls, bypasses and valves that are often overlooked during inspection and maintenance. Pump filters should also be clean. Characteristics Of Cooling Tower Pump a.Stable operation: the absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration. b.No leakage: cemented carbide seals of different materials ensure no leakage of different media. c.Low noise: the water pump supported by low noise bearing runs smoothly, and there is basically no noise except the weak sound of motor. d.Low failure rate: the structure is simple and reasonable, the key parts are equipped with international first-class quality, and the trouble free working time of the whole machine is greatly improved. e.Easy maintenance: easy to replace seals and bearings. f. Less land occupation: the outlet can be left, right and up, which is convenient for pipeline layout and installation and saves space.
High Pressure Pneumatic Pump A high-pressure pneumatic pump is a device designed to generate and deliver pressurized air at elevated levels for various industrial, commercial, and research applications. These pumps are used to produce compressed air at pressures higher than atmospheric pressure. Function and Features Air Compression: A high-pressure pneumatic pump works by using mechanical means to compress and elevate the pressure of air or gas. This pressurized air can then be used for a variety of tasks and processes. Piston or Diaphragm Design: High-pressure pneumatic pumps often use either piston or diaphragm mechanisms to compress the air. These mechanisms help create the necessary pressure difference for air compression. Pressure Regulation: Many high-pressure pneumatic pumps are equipped with pressure regulators that allow users to control and adjust the output pressure according to the requirements of the specific application. Built-in Safety Features: Safety measures, such as pressure relief valves and automatic shut-off systems, are commonly integrated into these pumps to prevent over-pressurization and ensure user safety. Pressure Gauges: High-pressure pneumatic pumps usually include pressure gauges that provide real-time readings of the generated air pressure. This helps users monitor and maintain the desired pressure level. Cooling Systems: Due to the heat generated during the compression process, some pumps incorporate cooling systems to prevent overheating and ensure continuous operation.
The air pump for this Dr. Odin air mattress provides sequential inflation and deflation of the air cells throughout the mattress, forming an air channel in the mattress to redistribute pressure. The air pump operates quietly, is vibration-free and energy-efficient. This Air Mattress can be placed over the top of an existing mattress. It is lightweight, portable, and easy for transportation. It is ideal for use in home health care or nursing homes. Features: PVC material Low noise Adjustable pressure Electric shock protection Air-tight pressure valve Low power consumption Portable & handy Care: Keep the electric pump on for 23 hours and keep it off for 1 hour Don't use the mattress near an open flame or near a heater Don't smoke near the air mattress Keep sharp objects away from the mattress Low noise & low vibrations Knob to adjust the pressure Easy to fit on a bed frame Recommended for bed ridden patients Additional Info: Model number: OD02 Warranty: 24 months Dimensions: 240 x 100 x 6.5 cms Weight: 2500gms Includes: Air pump, Air mattress, User manual, Repair kit Air Output: 6-7 Minutes Material: PVC Maximum User Weight: 130KGs Pressure Range: 70-130 mmHG Power Supply: 220-240 V/50HZ
