Hammer mill crusher Application Hammer mill crusher is suitable for mid-hard and light erosive Materials, whose pressureresistance strength is no more than 100Mpa and humidity lower than 15%, suchas coal, salt, chalk, gypsum, blocks, lime Stone, etc. Hammer mill crusher Operating Principle The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw Materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammerto small size. There is a screening plate under the rotor, so that Materials with size smaller than the screen mesh will be screened out and others are left tobe further hammered and ground until reach the st and ard size. The size of the final product can be adjusted by changing the screening plate. The gap between therotors and the screening plate can also be adjusted according to different requirement. Hammer Mill Design The major components of hammer mill, shown in the picture, include: - a delivery device is used to introduce the material to be ground into the path of the hammers. A rotor comprised of a series of machined disks mounted on the horizontal shaft performs this task. - free-swinging hammer that is suspended from rods running parallel to the shaft and through the rotor disks. The hammer carries out the function of smashing the ingredients in order to reduce their particle size. - a perforated screen and either gravity- or air-assisted removal of ground product. Acts to screen the particle size of the hammer mill to ensure particles meet a specified maximum mesh size. Feeder Design Materials are introduced into the paths of the hammers by a variable speed vein feeder. This type of feeder can have its motor slaved by a programmable controller to the main drive motor of the hammer mill. The operational speed of the feeder is controlled to maintain optimum amperage loading of the main motor. Screen Design The amount of open area in hammer mills screen determines the particle size and grinding efficiency. The screen must be designed to maintain its integrity and provide the greatest amount of open area. Screen openings (holes) that are aligned in a 60-degree staggered pattern optimize open area while maintaining screen strength. This method will result in a 40 percent open area using 3.2 mm (1/8 inch) holes aligned on 4.8 mm (3/16 inch) centers. Read more: evelyn@cncharcoalmachine.com
Usage:Add to feeds by pyrogenation & spurt-oil equipment and mix adequately. Acid Value 35mg KOH/g Max Acetone Insoluble (pure lecithin) 60% Min Moisture 1% Max Ether Insoluble Substance 1% Max
Diameter for the threads rolled 4-42/mm Range of pitch rolled 0.7-3.5P Length of thread rolled In feed or Thru feed Spindle speed 36/47/60/78rpm Outside diameter of rolling die 135mm-170mm Inside diameter of rolling die(keyway) 54mm Thickness of rolling die 110mm Min.center distance between die spindles 120mm Max.center distance between die spindles 240mm Output(pcs/min) 5-35 pcs/min Machine motor 5.5HP Hydraulic motor 3HP The highest feed pressure 15T Supply voltage 380V 3P 50H
Soya Lecithin Liquid Feed Grade Description: Soya Lecithin is a natural-sourced, consistent, superior feed ingredient that is an excellent source of dietary phospholipids. It can improve survival and growth rate of fish and shrimp. And it provides a consistent source of bio-available phospholipids. Soya Lecithin is nutritionally superior source of choline, inositol and unsaturated fatty acids. It acts as a natural antioxidant and a feed attractant. Specifications: Appearance: Brown or yellow liquid soya lecithin Acetone Insoluble: 60% min Aether Insoluble: 1% max Moisture: 1% max Acid Value: 35mgKOH/g max Package: 200kg net weight per drum
Features of 1 Series PTO Shaft 1. The 1 Series PTO Shaft is equipped with several characteristics which make it a popular option for industrial and agricultural applications. A few of these features are: Universal Compatibility Universal Compatibility 1 Series PTO shaft has an established design that is compatible with the majority of tractors that have 20 to 30 horsepower It is a versatile and widely used component. High Strength and Durability This shaft generally composed of high-strength stainless steel or other materials that are able to withstand the high force and the heavy load of industrial and agricultural work. Simple Installation and Operation Its 1 Series PTO shaft is easy to install and operate using a simple connect yoke and safety shield that requires no prior knowledge or training. A Wide Variety of Applications This shaft is able to be utilized with a range of tools, such as balers, mowers, pumps and generators, making it a useful instrument for all kinds of jobs. Safety Features Safety Features 1 Series PTO shaft includes various safety features, such as the safety shield or guard which covers this rotating part, which reduces the chance of getting injured or becoming entangled. Cost-effective 1 Series shaft is generally an economical choice for businesses and farmers that offer high-quality power transmission at an affordable price. # Applications of 1 Series PTO Shaft This shaft from the 1 Series series is an incredibly versatile part that can be used in a myriad of industrial and agricultural uses. The most common uses that can be made use of this 1 Series PTO Shaft include: 1. Mowing - Mowing - 1 Series shaft is able to power rotary mowers and other types of mowers which allows for effective and efficient grass cutting in pastures and fields. 2. Tilling The 1 Series shaft is able to be used in conjunction with tillers rotary and other equipment for soil cultivation to make planting beds, and to loosen soil to prepare for planting. 3. Hay and forage shaft - 1 Series shaft may serve as a power source for balers, hayrakes, and other equipment for harvesting and processing hay. 4. Livestock Management This shaft is able to be used in conjunction with feeder mixers and feed grinders and other equipment utilized in management and feeding of livestock. 5. Water and Irrigation 1 Series shaft is able to use to run water pumps as well as other irrigation equipment. This allows the effective and efficient irrigation in agriculture settings. 6. Industrial Applications Industrial Applications 1 Series shaft is able to be utilized in many industrial applications, like the powering of compressors, generators, and many other kinds of machines. Overall overall, this 1 Series PTO Shaft is an efficient and versatile part that is suitable for various applications to deliver powerful and efficient power transmission.
Classification: Compound Fertilizer        Type: NPK Place of Origin: Shandong, China (Mainland)    Release Type: Quick State: Powder                   Purity: 100% Application: Crops                Brand Name: Seasprit Model Number: 10 55 10 Product Name:   NPK 10 55 10  NPK  Fertilizer , NPK Mixed Fertilizer Main Ingredient:   N-P-K: 10-55-10, Nitrate Nitrogen?¥6%, Fe: 0.1%, Zinc: 0.05%, Mn: 0.05%, Mo: 0.01%,B: 0.05%, TE: 0.25-1.0%. Product Information:   The product has scientific and reasonable formula, it can meet the nutrient demand of plants in different grow period. It can make sure the plants form every organs, accumulate and transform the nutrient and energy. This product can improve product quality and increase yield. Physical and Chemical Properties:   Its appearance is blue or other colourful powder. It can be dissolved in water speedly. Water Solubility: 100% Efficacy:  (1) It has high content NPK and abundant nutrient. It can be dissolved in water speedly and has high fertilizer efficiency.  (2) It has NPK and all kinds of trace element.  (3) It has no impurities and no pollution to the environment. It is safe and high efficient to the plants.  (4) It can save water, fertilizer and labour. It can resist disease and increase the yield. Application Range:   It can be sued in every growing period of vegetables, flowers, fruit trees, etc. But it is more appropriate to use in seedling stage and vegetative growth stage. It can provide abundant nutrient to plants. Application Method:  (1) Foliar Spray: Dilute with 1000-1500 time water and spray on the leaves.  (2) Water flushing irrigation: Dilute with 500-1500 time water and irrigate every 10-15 days. Use 60-90KG per Hectare.  (3) Drip Irrigation: Dilute with 1000-2000 time water and irrigate every 7-10 days. Use 45-75KG per Hectare.  (4)  It is suitable for sprinkling irrigation, foliar spray, root irrigation and hole application. Please don??t use it together with strong basicity pesticide. If used for foliar spray, it is better to do it after 4 O??clock PM. If it rains within 6 hours after foliar spray, please spray it again. Notes:   Please regulate the dosage, dilution percentage and application times according to seasons and plant growing situations. Packing:   1-10kg PP BAG. Price:USD$230-290/ton
Features Throughput: 60 samples/hour Principle: ISE(Ion Selective Electrode) 5.6-inch color touch screen Auto sampling, washing, calibration Maintenance-free electrodes, 12 months lifespan Simple tubing system, easy maintenance CE marked Technical Specifications Sample type: Serum, etc. Sample volume:100-200L Reagent consumption: 2 times sample volume Calibration: Automatic or On-demand Closed reagent, real time monitoring reagent Printer: Internal thermal printer Display: LCD Multiple language: English, Russian, etc. Storage: Up to 50,000 results Interface: RS-232, support LIS Working temperature:15-30C Humidity: 20%-80% Dimension: 430 27 410mm Power: AC100~240V, 50/60 Hz, 80W Net weight :8 kg Reagent DS-I(NO.3) Standard A Standard B (390/160 mL) Cleaning Solution (250 mL) PVC Electrode Activating Solution PVC Electrode Activating Solution(50 mL) DS- Ref Ref. Filling Solution(10 mL) DS- ISE Filling Solution (10mL) Deprotein Solution (R1: Diluent 18mL/bottle 1; R2: Protease powder 100mg/bottle 6)
We have all types of A4 paper 80 gsm 75gsm and 70gsm. Also we have A3 paper A4 paper in rolls, ream. Technical Specification: â?? Brightness: 102-104%(class A) Size: A4 - A3 Wood Pulp: 100% wood pulp Whiteness: CIE167 Capability: High Speed Copying100ppm, Laser Roughness: 140ml/Min Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: 110 Mn Bending stiffness CD: >50 Mn Thickness : 101 Mm Density : 0,72 g/cm3 Roughness : WS 200~400 ml/min Roughness : FS 200~400 ml/min Brightness : 102% Opacity : 86% Cobb60 Data : 30 g/m2 Tensile MD : 6.2 Kg/15mm Tensile CD : 2.5 Kg/15 mm Moisture : 4~7 % No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for; Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines.
The principle of cow dung press is spiral extrusion solid-liquid separation technology. The main components are: body, screen, extrusion auger, reduction motor, discharge device and other components. The solid separated from the cow dung dehydrator is dry and odorless. It is a good farmland fertilizer. It does not produce leachate during storage, and is convenient for transportation and storage. It can effectively improve the air environment of the livestock farm and solve the environmental pollution problem during the transportation of solid dung residue. After separation, the water content of the liquid part is about 60%, which is not easy to produce crusting and sedimentation during storage. The separated liquid nitrogen and phosphorus content is small, which can be diluted and used as irrigation water or fertilizer, and can be effectively absorbed by farmland crops.
Features 1. Light weight, easy for installation and movement. 2. The costs and performances are much better than steel pontoons. 3. Good Flexibility, excellent impact resistance, particularly suitable in the open sea. 4. Higher corrosive resistance, anti-uv, anti-aging ,it can be used for 5-8 years,3 times longer than steel floater. 5. The outer and inner wall are very smooth, friction coefficient is tiny, all of these features are good for transmission. 6. It can be used from â?? 60 to 80 ° c. Application: The MDPE floater is widely applied in dredging and mine tailings area for delivering the fluid that contains the medium of mud, slag and so on. Tengyuan can supply municipal engineering pipe, dredging engineering pipe, HDPE Gas Pipe, Power Engineering Pipe, Mining Pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.
Multi Span Greenhouse (CMB1230) Width:9.0m,8.0m*n Length:20m-100m Apex Height:4.5m-6.0m Wall Height:2.5m-4.5m Claddingï¼?Poly Film, Pipe Diameterï32,â?¡80*60*1.5 Advantage High quality steel structure and long service life, The frame works structure is assembled by prefabricated parts, All the greenhouses we designed are easy&quick to be installed and dismantled.No welding involved,all connected by clips and clamps,bolts and screw,slot and springs, The most economical greenhouse for large growers, Optional systems are available for agriculture usage greenhouse: Internal shade system or exterior shade system Cooling and heating system Irrigation system Side Ventilation and roof ventilation(with manual or automatic open-close operation control system is optional ) Hydroponic system
Microwave disinfection unit for medical waste Model MDU-3B MDU-3B is an integration system including feeding, shredding, disinfection, discharging, and exhaust dedusting systems. 180kg/h treatment capacity, or 1800l/h, based on an average density of medical waste at 0.1kg/l ~0.15kg/l. It can service well to large scale hospitals, or any other healthcare centers, whose medical waste quantity would be 1.5 tons per day (10%). Applicable range Blood and Blood Products Dialysis Waste Animal Tissues, Body Parts, and Carcasses Human Tissues, Body Parts, and Limbs Biological and Non-Hazardous Pharmaceutical Needles, Syringes, and other Sharps Research Waste Laboratory Specimens Surgery Waste Pathology and Histology Samples Aids and Hepatitis Waste Isolation Waste Cultures and Slides Intravenous Bags, Blood Bags, and Associated Tubing Animal Bedding Packaging Materials Gloves, and Gowns Associated with Waste Collection Trace Chemotherapy/anti- neo plastic waste
Application: Automatic packaging of liquid, granule or powder in sachet pack for the food, pharmaceutical,chemical and other industries. Standard Features: 1. The machine can automatically complete the products measuring, conveying and feeding, filling and bag forming, date code printing, bag sealing and cutting. 2. Motor driven film wheel pulling system. 3. High sensitive fiber optic photo sensor can automatically trace color mark accurately. 4. PLC control system combined with touch screen, can easily set can change the packingparameters. Daily production output and self-diagnostic machine error can beviewed directly from the screen. 5. PID temperature controller monitors heat sealing temperature within +/- 1ºC 6. Automatic edge position control assures consistent film alignment during production to produceuniform bag quality. 7. With CE Certificate Necessary Measuring Filler: 1. Auger Screw Filler for Powder 2. Volumetric Cup Filler for Granule 3. Piston Pump for Liquid Optional Parts for Main Machine: 1. Date Code Printer 2. Fix Number Cut 3. Stainless Steel Machine Out Case Optional Sealing Format: 3-Side Seal, 4-Side Seal or Center Seal. TechnicalSpecification: Model No. Applicable Product Measuring Range (ml) Bag Length (mm) Bag Width (mm) Speed (Bag/min) Power Doser GPM-100G Granule A:1-10 B: 5-50 30-120 30-85 50-100 220V/1ph Volumetric cup GPM-100L Liquid 3-50 30-120 30-85 30-60 220V/1ph Liquid pump GPM-100P Powder 3-50 30-120 30-85 30-60 220V/1ph Screw auger GPM-100T Tablet 3-50 30-120 30-85 10-60 220V/1ph Tablet round plate GPM-100V Screw, hardware parts 3-50 30-120 30-85 10-60 220V/1ph Vibrating bowl FAQ Q1: How do I find a Packing machine model suitable for my product? A: PLS Tell me about your details information and requirement. 1. What is your packing object details(size). 2. What process you want our packing machine be in charge of? 3. What is the situation of your working environment and former working process. 4. Your requirement for the machines working capacity Q2:Are you factory or trading company? A:We are manufacturing&trading company with Shanghai Sales Office and Jiangxing production base.Welcome to visit us. Q3:What about the production lead time? Regarding Production Time;usually we need 3 working days after technical details and order confirmation for individual machine. A:But for the whole packing line,we need 20-30 working days. Q4:What about payment terms? A:We accept TT/Western Union/Cash/LC/Trade assurance order,With 30% deposit as advance payment and 70% as balance payment. before machine leaving the factory.
Application: Automatic packaging of liquid, granule or powder in sachet pack for the food, pharmaceutical,chemical and other industries. Standard Features: 1. The machine can automatically complete the products measuring, conveying and feeding, fillingand bag forming, date code printing, bag sealing and cutting. 2. Motor drivenfilm wheel pulling system. 3. High sensitive fiber optic photo sensor can automatically trace color mark accurately. 4. PLC control system combined with touch screen, can easily set can change the packingparameters. Daily production output and self-diagnostic machine error can beviewed directly from the screen. 5. PID temperature controller monitors heat sealing temperature within +/- 1ºC 6. Automatic edge position control assures consistent film alignment during production to produceuniform bag quality. 7. With CE Certificate Necessary Measuring Filler: 1. Auger Screw Filler for Powder 2. Volumetric Cup Filler for Granule 3. Piston Pump forLiquid Optional Partsfor Main Machine: 1. Date CodePrinter 2. Fix Number Cut 3. Stainless Steel Machine Out Case Optional Sealing Format: 3-Side Seal, 4-Side Seal or Center Seal. Technical Specification: Model No. Applicable Product Measuring Range (ml) Bag Length (mm) Bag Width (mm) Speed (Bag/min) Power Doser GPM-100G Granule A:1-10 B: 5-50 30-120 30-85 50-100 220V/1ph Volumetric cup GPM-100L Liquid 3-50 30-120 30-85 30-60 220V/1ph Liquid pump GPM-100P Powder 3-50 30-120 30-85 30-60 220V/1ph Screw auger GPM-100T Tablet 3-50 30-120 30-85 10-60 220V/1ph Tablet round plate GPM-100V Screw, hardware parts 3-50 30-120 30-85 10-60 220V/1ph Vibrating bowl FAQ Q1: How do I find a Packing machine model suitable for my product? A: PLS Tell me about your details information and requirement. 1. What is your packing object details(size). 2. What process you want our packing machine be in charge of? 3. What is the situation of your working environment and former working process. 4. Your requirement for the machines working capacity Q2:Are you factory or trading company? A:We are manufacturing&trading company with Shanghai Sales Office and Jiangxing production base.Welcome to visit us. Q3:What about the production lead time? Regarding Production Time;usually we need 3 working days after technical details and order confirmation for individual machine. A:But for the whole packing line,we need 20-30 working days. Q4:What about payment terms? A:We accept TT/Western Union/Cash/LC/Trade assurance order,With 30% deposit as advance payment and 70% as balance payment. before machine leaving the factory.
Application: Automatic packaging of liquid, granule or powder in sachet pack for the food, pharmaceutical,chemical and other industries. Standard Features: 1. The machine canautomatically complete the products measuring, conveying and feeding, fillingand bag forming, date code printing, bag sealing and cutting. 2. Motor drivenfilm wheel pulling system. 3. High sensitivefiber optic photo sensor can automatically trace color mark accurately. 4. PLC controlsystem combined with touch screen, can easily set can change the packingparameters. Daily production output and self-diagnostic machine error can beviewed directly from the screen. 5. PID temperature controller monitors heat sealing temperature within +/- 1ºC 6. Automatic edge position control assures consistent film alignment during production to produceuniform bag quality. 7. With CE Certificate Necessary Measuring Filler: 1. Auger Screw Filler for Powder 2. Volumetric Cup Filler for Granule 3. Piston Pump for Liquid Optional Partsfor Main Machine: 1. Date CodePrinter 2. Fix Number Cut 3. Stainless Steel Machine Out Case Optional SealingFormat: 3-Side Seal, 4-Side Seal or Center Seal. Technical Specification: Model No. Applicable Product Measuring Range (ml) Bag Length (mm) Bag Width (mm) Speed (Bag/min) Power Doser GPM-100G Granule A:1-10 B: 5-50 30-120 30-85 50-100 220V/1ph Volumetric cup GPM-100L Liquid 3-50 30-120 30-85 30-60 220V/1ph Liquid pump GPM-100P Powder 3-50 30-120 30-85 30-60 220V/1ph Screw auger GPM-100T Tablet 3-50 30-120 30-85 10-60 220V/1ph Tablet round plate GPM-100V Screw, hardware parts 3-50 30-120 30-85 10-60 220V/1ph Vibrating bowl FAQ Q1: How do I find a Packing machine model suitable for my product? A: PLS Tell me about your details information and requirement. 1. What is your packing object details(size). 2. What process you want our packing machine be in charge of? 3. What is the situation of your working environment and former working process. 4. Your requirement for the machines working capacity Q2:Are you factory or trading company? A:We are manufacturing&trading company with Shanghai Sales Office and Jiangxing production base.Welcome to visit us. Q3:What about the production lead time? Regarding Production Time;usually we need 3 working days after technical details and order confirmation for individual machine. A:But for the whole packing line,we need 20-30 working days. Q4:What about payment terms? A:We accept TT/Western Union/Cash/LC/Trade assurance order,With 30% deposit as advance payment and 70% as balance payment. before machine leaving the factory.
Operating principle: Through high-speed rotation of open-type rotor in the crusher,the rock materials that enter the rotor are tossed out in a high speed and crash against the rock materials that overflow from and slide down the surrounding of feed hopper,realizing the purpose of rock crushing and shaping. Characteristics: The crushing is achieved by rock materials crashing against each other,which reduces abrasion.The changing of factors like rotor diameter,rotation speed and crushing cavity shape,etc,can not only improve crushing efficiency but also effectively control grinding and crushing granularity,so that the required granularity can be realized. It features advantages like reliability,high efficiency,energy conservation,etc.
Bebilon Profutura Duo Biotik 1 powdered infant milk can be used from birth on non-breastfed infants. It is also suitable for use as a supplement to breastfeeding if there is a need to feed the baby Bebilon Profutura Duo Biotik 1 has an advanced DuoBiotik formula. It also contains docosahexaenoic acid - DHA, an omega-3 polyunsaturated fatty acid. The 800 g package is enough to prepare approx. 57 portions of milk with a capacity of 100 ml. It uses a tightly closed lid, which allows for safe and hygienic storage of milk. Inside, there is a measuring cup that allows you to precisely measure the right amount of powder.
ML 8322 Round baler As the latest product, this product continues to innovate boldly on the basis of valuable practical experience in the past, increase reliability, and comprehensively improve operating performance. This product covers almost all the functions required by the industry, with a high degree of intelligence, and the control system tends to be more Humanized design, high bale density and powerful feeding system can realize efficient baling operations even when dealing with heavier wet grass or lush straw. This product is suitable for the bundling of various pastures and crop stalks. It is a heavy-duty round baler with high intelligence and high efficiency.
L-Methionine is colorless or white shiny flake crystal or white crystalline powder, slightly with special smell and slightly bitter taste.The melting point of 280 ~ 281 â??.Unstable to strong acids, which can lead to demethylation.Soluble in water (5.6 g / 100 ml, 30 â??), warm dilute ethanol, alkaline solution, or dilute mineral acids.Insoluble in ethanol, almost insoluble in ether. Application: 1.Used for biochemical research and nutritional supplements, but also for the adjuvant treatment of pneumonia, cirrhosis and fatty liver 2.Can be used as feed additive
Pet Food Production Line A pet food production line is a series of machines and processes used to produce high-quality, safe and nutritious pet food. Pet food production line gives pet food novel shape, unique taste and color, scientific nutritional ratio, easy to digest and other characteristics, in order to adapt to the continuous development of the pet food market. There are a variety of flavors and shapes to meet the needs of all kinds of pet food. The pet food production line consists of Hammer Mill, Mixer, Pellet Mill, Extruder, Dryer, Cooler, Coater, Dust Collector, and Bagging Machine. Pet food production line At the heart of a pet food production line is a hammer mill that efficiently pulverizes the ingredients to a fine consistency, ensuring optimal nutrient absorption for our furry friends. The meticulously calibrated mixer then blends high-quality ingredients, including bone meal, meat, protein, vitamins, fiber, and other essential nutrients, to create a wholesome base. The pellet mill and extruder blended the mixture into an assortment of enticing shapes and sizes. Through the power of strong extrusion and instant expansion molding, we produce pet dog food with the perfect texture and consistency, along with delectable cat food and other food pellets. Furthermore, our production line enables us to create specialized aquatic feeds such as floating feed, mackerel feed pellets, goldfish feed pellets, shrimp feed pellets, crab feed pellets, and more. With a versatile range of particle sizes, ranging from 0.9mm to 15mm, we cater to the dietary needs of fish of various sizes. This flexibility allows us to serve a wide spectrum of aquatic farms, feed processing plants, and the pet food industry at large. How is pet food produced? Typical raw materials used in pet food processing include grain flour, vegetable proteins, minerals and vitamins, and in some cases meat or fish meal and fresh meat. The dry material enters the pre-conditioner+ and is steam hydrated. A blender mixes the ingredients and ensures that steam, moisture and ingredients are properly mixed. The preconditioning produces partial pasting of the starch and structure of the polymer. The semi-cooked mixture is then fed to a twin-screw extruder where shear, internal temperature, pressure, moisture and residence time are precisely controlled to achieve optimum starch pasting without loss of food quality. At different stages of processing, liquid or steam can be injected through ports in the barrel of the extruder. Degassing can be carried out at this stage using exhaust packings.
